CDC621H-CD_MECH.pdf part of Sharp CD-C621H audio_hi-fi_©_.part1.rar, Service Manual Audio Stereo - Tot. 17 File

Text preview for : CDC621H-CD_MECH.pdf part of Sharp CD-C621H Service Manual Audio Stereo - Tot. 17 File - Part. 1/2

Back to : audio_hi-fi_©_.part1.rar | Home

CD-C621H
CP-C621H
STEP 1 REMOVAL Front Speaker PROCEDURE 1. Front Panel ............ (A1) x1 2. Tip .......................... (A2) x2 3. Screw ..................... (A3) x6 FIGURE 9-1

CP-C621H

(A3)x2 ø3x10mm Tweeter (A3)x4 ø4x12mm

(A2)x2

Note: The rear speakers can be easily disassembled. Therefore the disassembling method is not discribed. For details refer to the disassembling drawing in the Parts Guide.

Woofer

Front Panel (A1)x1 Screw Driver
Figure 9-1

REMOVING AND REINSTALLING THE MAIN PARTS
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13, 14 and 15 of the disassembly method to remove the CD mechanism.

Loading/Up/ Down Motor Motor PWB

How to remove the loading motor (See Fig. 9-2)
1. Remove the screws (A1) x 2 pcs., to remove the loading motor.

(A1) x2 ø2.6 x5mm
How to remove the pickup (See Fig. 9-3)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2). 2. Remove the stop washer (B3) x 1 pc., to remove the gear (B4). 3. Remove the pickup. Note After removing the connector for the optical pickup fromthe connector wrap the conductive aluminium foil around the front end of connector so as to protect the optical pickup from electrostatic damage. Figure 9-2

Stop Washer (B1) x2 (B3) x1 ø2.6 x6mm

Pickup

Shaft (B2) x1

CD Mechanism Gear (B4) x1
Figure 9-3

9