AA-2W.pdf part of SONY AA-2W AA-2W.pdf, Sony AA-2W SERVICE MODE text manual preview

Text preview for : AA-2W.pdf part of SONY AA-2W Sony AA-2W SERVICE MODE

Back to : AA-2W.pdf | Home

SERVICE MANUAL
MODEL NAME REMOTE COMMANDER DESTINATION

AA-2W CHASSIS
CHASSIS NO.

KV-29FV16A

RM-Y171

Argentina

SCC-S34P-A

KV-29FV16A

RM-Y171

TRINITRON® COLOR TELEVISION
9-965-908-01

KV-29FV16A

SECTION 4: CIRCUIT ADJUSTMENTS ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER
Use the Remote Commander (RM-Y171) to perform the circuit adjustments in this section. Test Equipment Required: 1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator

4-1. SETTING THE SERVICE ADJUSTMENT MODE
1. Standby mode (Power off). 2. Press the following buttons on the remote commander within a second of each other: Channel 5 Sound Volume + Power DISPLAY

SERVICE 1000 0000

WRITE

Factory original setting 10. Turn set off and on to exit.

SERVICE ADJUSTMENT MODE IN
Register Item Device Item SERVICE 1000 0 VP Data Item VPOS 30

4-2. MEMORY WRITE CONFIRMATION METHOD
1. After adjustment, pull out the plug from the AC outlet, then replace the plug in the AC outlet again. 2. Turn the power switch ON and set to Service Mode. 3. Call the adjusted items again to confirm they were adjusted.

4-3. REMOTE ADJUSTMENT BUTTONS AND INDICATORS
3. 4. 5. 6. 7. 8. The CRT displays the item being adjusted. Press 2 or 5 on the Remote Commander to select the device item. Press 1 or 4 on the Remote Commander to select the item. Press 3 or 6 on the Remote Commander to change the data. To recover the latest values, press 0 then ENTER . Press MUTING then ENTER to write into memory**.
MUTING POWER VTR/DVD SAT/CABLE TV

MUTING (Write into memory)

SYSTEM OFF

FUNCTION
VTR/DVD SAT/CABLE TV

POWER (Service mode) DISPLAY (Service mode) 3 (Data up) 6 (Data down) 5 (Device item down) ENTER (Write into memory)

TV/VTR

FREEZE

SWAP

PIP

+
CH POSITION AUDIO TV/VIDEO

Ð
ANT PICTURE MODE TV/VIDEO

SLEEP

MTS/SAP

DISPLAY

Note: If the NVM is replaced, perform this test and reset. Then download from microprocessor to NVM to prevent loss of picture.

1 (Item up) 2 (Device item up) 4 (Item down) 8 (Initialize)

1 4 7
JUMP

2 5 8 0

3 6 9
ENTER GUIDE

SERVICE ADJUSTMENT MODE MEMORY
Register Item Device Item SERVICE 1000 0 VP Data Item VPOS 30

TV/SAT

RESET

MENU

VOL

CH

MUTING Green

0 (Read out of memory)

VOL (+) (Service mode)
CODE SET
RM-Y171

ENTER Red

TV
9. Press 8 then ENTER on the Remote Commander to initialize. Note: Carry out this step when adjusting IDs 0 to 4 and when replacing IC102. RM-Y171 ** WARNING: Do NOT turn off the power or remove the AC cord immediately after pressing MUTING then ENTER . Wait at least 10 seconds

-- 13 --

KV-29FV16A

SERVICE DATA
No. Register Name Description Data Range Adj/Fix Initial Data
NTSC PAL-M PAL-N TV/AUX S/VIDEO 1-3 VIDEO 4

Average Data
NTSC PAL-M PAL-N TV/AUX S/VIDEO 1-3 VIDEO 4

VP CXA2135S
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 HPOS HSIZ VBOW VANG TRAP PAMP UCPN LCPN VSIZ VPOS VLIN VSCO VZOM EHT ASP SCRL HBSW LBLK RBLK HDW EWDC LVLN UVLN RDRV GDRV BDRV RCUT GCUT BCUT RDR4 GDR4 BDR4 RCU4 GCU4 BCU4 SHUE SCOL SBRT RON GON BON AXPL CBPF COFF KOFF SSHP SHPF PREL Y-DC ABLM YDEL NCOL FSC K-ID HOSC VSS HSS HMSK VTMS Horizontal Position Adjust Horizontal Amp Adjust VRT Line Bowing Adjust VRT Line Bow Slant Adjust Horizontal Trapezoid Adjust Horizontal Pin Distort Adjust Upper Pin Lower Pin Vertical Amplitude Test Vertical Position Test Vertical Linearity Adjust S-Correction 16:9 CRT Z Mode On/Off VRT High Volt Correction Aspect Ratio Control 16:9 CRT Z Mode Tran Scroll HBLK SW Left Screen H Blk Control Right Screen H Blk Control H Drive Pulse Width EW/DC Adjust Screen Bottom VRT Lin Adjust Screen Top VRT Lin Adjust R Output Drive Control G Output Drive Control B Output Drive Control R Output Cutoff Control G Output Cutoff Control B Output Cutoff Control Video 4 R Output Drive Control Video 4 G Output Drive Control Video 4 B Output Drive Control Video 4 R Output Cutoff Control Video 4 G Output Cutoff Control Video 4 B Output Cutoff Control Sub Hue Sub Color Sub Brightness R Output On/Off G Output On/Off B Output On/Off Axis Pal Chroma BPF On/Off Color On/Off Set Color Killer Sub Sharpness Sharpness Circuit F0 Pre/Over-Shoot Switching DC Trans Radio Switching ABL Mode Switching Y Delay Time Control No Color ID FSC Out On/Off Killer ID H VCO Oscillation Frequency V Sync Slice Level H Sync Slice Level H Mask Select Signal VTIM Pin 0-31 0-31 0-15 0-15 0-15 0-63 0-63 0-63 0-63 0-63 0-15 0-15 0,1 0-15 0-63 0-63 0,1 0-15 0-15 0,1 0,1 0-15 0-15 0-63 0-63 0-63 0-15 0-15 0-15 0-63 0-63 0-63 0-15 0-15 0-15 0-31 0-31 0-63 0,1 0,1 0,1 0,1 0,1 0,1 0,1 0-15 0,1 0,1 0,1 0,1 0-15 0,1 0,1 0,1 0-15 0,1 0,1 0,1 0-3 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Adj Adj Adj Adj Adj Adj Adj Adj Adj Adj Adj Adj Adj Adj Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 7 10 6 5 6 32 36 36 0 31 7 7 0 4 47 31 1 15 0 0 0 0 0 31 31 31 7 7 7 31 31 31 7 7 7 7 15 15 1 1 1 0 1 0 0 6 5 6 7 10 6 5 6 32 36 36 0 31 7 7 0 4 47 31 1 15 0 1 0 0 0 31 31 31 7 7 7 31 31 31 7 7 7 15 15 15 1 1 1 0 1 0 0 6 5 6

0 4 47 31 1 15 0 0 0 0 0 31 31 31 7 7 7 31 31 31 7 7 7 7 15 1 1 1 0 0 0 7 1 1 1 1 1 1 1 7 0 0 1 0

0 4 47 31 1 15 0 1 0 0 0 31 31 31 7 7 7 31 31 31 7 7 7 15 15 1 1 1 0 0 0 7 1 1 1 1 1 1 1 7 1 1 1 0

1 1 1 7 1 1 1 7 0 0 1 0

1 1 1 7 1 1 1 7 1 1 1 0

-- 14 --

KV-29FV16A

SERVICE DATA (CONT.)
No. Register Name Description Data Range Adj/Fix Initial Data
NTSC PAL-M PAL-N TV/AUX S/VIDEO 1-3 VIDEO 4

Average Data
NTSC PAL-M PAL-N TV/AUX S/VIDEO 1-3 VIDEO 4

VP CXA2135S continued
60 61 62 63 64 65 66 AFC FIFR REFP VBSW BMOF AGN2 YSHU AFC Loop Gain Field Frequency REFP VBW Blk Off Aging 2 Hue for YUV Models 0-3 0-3 0,1 0-3 0,1 0,1 0-63 Fix Fix Fix Fix Fix Fix Fix 0 3 0 0 0 0 31 3 0 0 0 0 31 0 1 0 0 0 0 31 1 0 0 0 0 31

AP BH3868
67 68 69 70 71 72 BBLP BBHP SVOL SBAL SBAS STRE BBE Low Pass BBE High Pass Sub Volume Sub Balance Sub Bass Sub Treble 0-15 0-15 0-15 0-15 0-15 0-15 Fix Fix Fix Fix Fix Fix 0 0 0 7 7 7 0 0 0 7 7 7 5 3 7 7 5 5 5 3 7 7 5 5

AP TDA7467
73 74 75 SPCA CENA INPA SRS/Space Attenuation SRS/Center Attenuation Input Attenuation 0-63 0-63 0-127 Fix Fix Fix 0 0 3 0 0 3 0 0 3 0 0 3

3D UPD64081
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 HHDS COUT YAPS NSDS MSS DYC EXAD PECS EXCS CPP HDP CDL DYCO DYGA DCCO DCGA YNRK YNRI YNRL CNRK CNRI CNRL ID1O ID1W ID1N CLK ST1S ST0S WSC VTRH VTRR LDSR PWRE PDRE PBRE VAPG VAPI TEST YPFT HH Off Gain 1/BPF On V Comp/Y Eaking On Adaptive Adaptive Hi Impedence Ext Ad Selected Standard Use CSI Just in Case VTB = 1.25 VPP H Phase +/- 0µ sec Y/C Delay +/- 0µ sec Y Moving Coring Y Moving Gain C Moving Coring C Moving Gain Effect Small Effect Small Noise Limit Effect Small Effect Small CNR Limit ID 1 Through 4:03 Normal Low Fix Monitor Out Monitor Out Coring H Non Standard DET H Non Standard DET Frame PWRE PDRE PBRE V Apacon Gain V Apacon Test Y Peaking 0-3 0-3 0-3 0-3 0-3 0-3 0,1 0-3 0-3 0-3 0-7 0-7 0-15 0-15 0-15 0-15 0,1 0,1 0-3 0,1 0,1 0-3 0,1 0,1 0,1 0,1 0-3 0-3 0-3 0-3 0-3 0-3 0,1 0-7 0-15 0-7 0-31 0,1 0-3 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 1 3 3 0 0 2 1 0 1 0 3 4 2 10 2 9 1 0 1 1 0 1 0 0 0 1 0 1 1 1 1 2 0 4 8 3 10 0 3 1 3 3 0 0 2 1 0 1 0 3 4 2 10 2 9 1 0 1 1 0 1 0 0 0 1 0 1 1 1 1 2 0 4 8 3 10 0 3 1 3 3 0 0 2 1 0 1 0 3 4 2 10 2 9 1 0 1 1 0 1 0 0 0 1 0 1 1 1 1 2 0 4 8 3 10 0 3 1 3 3 0 0 2 1 0 1 0 3 4 2 10 2 9 1 0 1 1 0 1 0 0 0 1 0 1 1 1 1 2 0 4 8 3 10 0 3

-- 15 --

KV-29FV16A

SERVICE DATA (CONT.)
No. Register Name Description Data Range Adj/Fix Initial Data
NTSC PAL-M PAL-N TV/AUX S/VIDEO 1-3 VIDEO 4

Average Data
NTSC PAL-M PAL-N TV/AUX S/VIDEO 1-3 VIDEO 4

3D UPD64081 continued
115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 YPFG V1PS VEGS CC3N C0HS CLPH SEL2 SEL1 YHCO YPCO ED20 OVST CSHD KCTT SHT1 SHT0 VCT OTT CGAT CGGT CGFT CGT HPLL BPLL FSCF PLLF KILR HSSL VSSL BGPS BGPW ADCL ADPD ADLT NRZO FSCO VTVH TST2 HMEM HINV HTMG HCP TST3 HHMG HHFG HHTG Y Peaking Gain Line Comb Dot H Line Comb Dot V C Width C Delay On Y-Ad Clamp Test DC Sensitivity Small DY Sensitivity Small Coring Small Coring On Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Burst PLL Fast Burst Gain Large PLL Loop Gain Large Killer Lever H Slice Level V Slice Level Start Burst Gate Width of Burst Gate ADC Clock Adc Power Down On Standard Check On Level Check On Normal Standard Use CSI Just in Case Polarity of Reset Field Memory Address HH Carrier Phase Test HH Moving Gain HH Off Max HH 0-15 0-3 0-3 0,1 0,1 0,1 0,1 0,1 0-3 0,1 0,1 0,1 0,1 0-3 0,1 0,1 0,1 0,1 0,1 0,1 0,1 0,1 0,1 0,1 0,1 0,1 0-15 0-15 0-15 0-15 0-15 0-3 0,1 0,1 0,1 0,1 0-3 0,1 0,1 0,1 0,1 0-15 0,1 0,1 0-3 0-15 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 10 2 2 0 0 0 0 0 2 0 1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 3 12 8 4 10 3 1 0 0 0 0 0 1 1 0 7 0 1 0 5 10 2 2 0 0 0 0 0 2 0 1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 3 12 8 4 10 3 1 0 0 0 0 0 1 1 0 7 0 1 0 5 10 2 2 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 3 12 8 4 10 3 1 0 0 0 0 0 1 1 0 7 0 1 0 5 10 2 2 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 3 12 8 4 10 3 1 0 0 0 0 0 1 1 0 7 0 1 0 5

PI TA1226N
161 162 163 164 165 166 167 168 169 170 171 172 SHPR BLAD SRTS YNR GIRE DAC1 DAC2 GCUR BLKC TEST RS RTC Picture Picture Picture Picture Picture Picture Picture Picture Picture Picture Picture Picture Improvement Improvement Improvement Improvement Improvement Improvement Improvement Improvement Improvement Improvement Improvement Improvement Sharpness Black Area Det. SRT Start Pos YNR Gamma Start DAC1 DAC2 Gamma Curve Black Compen. Test RS RTC 0-127 0-3 0-3 0,1 0-3 0,1 0,1 0,1 0,1 0-3 0-7 0-7 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 59 0 3 1 3 1 0 0 1 3 0 4 59 0 3 1 3 1 0 0 1 3 0 4 59 0 3 1 3 1 0 0 1 3 0 4 59 0 3 1 3 1 0 0 1 3 0 4

-- 16 --

KV-29FV16A

SERVICE DATA (CONT.)
No. Register Name Description Data Range Adj/Fix Initial Data
NTSC PAL-M PAL-N TV/AUX S/VIDEO 1-3 VIDEO 4

Average Data
NTSC PAL-M PAL-N TV/AUX S/VIDEO 1-3 VIDEO 4

DC CXA2060
173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 DCSF UYBW LYBW HAMP UCBW LCBW UMBH LMBH PWM HTLT UTLD LTLT HDTY TOFF DAC0 DAC1 Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic Convergence Convergence Convergence Convergence Convergence Convergence Convergence Convergence Convergence Convergence Convergence Convergence Convergence Convergence Convergence Convergence DC Shift Upper YBOW Lower YBOW H. Amp H. CBOW L. CBOW U. MBH L. MBH PWM H. Tilt U. Tilt L. Tilt H. Duty Tilt Off DAC0 DAC1 0-63 0-63 0-63 0-63 0-63 0-63 0-63 0-63 0-63 0-63 0-63 0-63 0-3 0,1 0-255 0-255 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 32 31 31 23 14 14 15 15 63 63 63 63 3 1 255 255 32 31 31 23 14 14 15 15 63 63 63 63 3 1 255 255 32 31 31 23 14 14 15 15 63 63 63 63 3 1 255 255 32 31 31 23 14 14 15 15 63 63 63 63 3 1 255 255

SP SDA9288
189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 PYSD PIPH PIPV PYDL PIFX PPFX PCLI PAMS PHDL PMVD PIVD PCON FRMY CHRI CHRO MAT0 MAT1 MAT2 IPER IPEB PCPS PCPF PSEL PPLL PVNR P in P (Seimens) YS Delay P in P (Seimens) H-Position P in P (Seimens) V-Position P in P (Seimens) Y-Delay P in P Inset Fixed P in P Parent Fixed P in P CLISW P in P AMSEC P in P (Seimens) H-Pulse Delay (Ins) P in P (Seimens) V-Pulse Delay (Mn) P in P (Seimens) V-Pulse Delay (Ins) P in P (Seimens) Contrast Lvl (Ins) P in P (Seimens) Frame Y P in P (Seimens) Chroma Input Pol. P in P (Seimens) Chroma Output Pol. P in P (Seimens) MAT0 P in P (Seimens) MAT1 P in P (Seimens) MAT2 P in P (Seimens) Pedestal R-Y P in P (Seimens) Pedestal B-Y P in P (Seimens) CLP & HSIDEL P in P (Seimens) CLP Cycles P in P (Seimens) SELDOWN P in P (Seimens) PLL Filter P in P (Seimens) VSP Pulse Noise R. 0-15 0-127 0-63 0-7 0-3 0-3 0,1 0,1 0-15 0-31 0-31 0-15 0-15 0,1 0,1 0,1 0,1 0,1 0-15 0-15 0,1 0,1 0,1 0-3 0,1 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 2 78 18 0 0 0 1 0 15 11 18 3 10 0 0 1 0 1 0 0 0 0 1 0 0 2 78 18 0 0 0 1 0 15 11 18 3 10 0 0 1 0 1 0 0 0 0 1 0 0 2 78 18 0 0 0 1 0 15 11 18 3 10 0 0 1 0 1 0 0 0 0 1 0 0 2 78 18 0 0 0 1 0 15 11 18 3 10 0 0 1 0 1 0 0 0 0 1 0 0

IC CXA2019
214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 IDPX ICOL ISHP ISCO ISCL ISHU ITOT ITRP IAFC ITRA ICD2 ISF0 IYDR IVPE IUPE IRVP IRUP Color Sharpness Sub Chroma Decoder Sub Cont Sub Chroma Decoder Sub Color Sub Chroma Decoder Sub Hue Sub Chroma Decoder Tot On Sub Chroma Decoder Trap On AFC Sub Chroma Decoder CTRAP ADJ Sub Chroma Decoder CD Mode2 SHP-F0 Sub Chroma Decoder Y Drive Sub Chroma Decoder V Ped Sub Chroma Decoder U Ped Sub Chroma Decoder RV Ped Sub Chroma Decoder RU Ped 0,1 0-63 0-15 0-15 0-15 0-15 0,1 0,1 0-3 0-15 0,1 0,1 0-31 0-15 0-15 0-15 0-15 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 0 38 10 7 8 7 0 1 1 7 1 24 0 0 9 7 0 38 10 7 7 0 1 0 38 10 7 8 7 0 1 1 7 1 24 0 0 9 7 0 38 10 7 7 0 1

1 1 24 0 0 9 7

1 1 24 0 0 9 7

-- 17 --

KV-29FV16A

SERVICE DATA (CONT.)
No. Register Name Description Data Range Adj/Fix Initial Data
NTSC PAL-M PAL-N TV/AUX S/VIDEO 1-3 VIDEO 4

Average Data
NTSC PAL-M PAL-N TV/AUX S/VIDEO 1-3 VIDEO 4

IC CXA2019 continued
231 232 233 234 235 236 237 238 IDCT IRYD IPRE IRUD IRVD IDLV ISCR ISCF Sub Sub Sub Sub Sub Sub Sub Sub Chroma Chroma Chroma Chroma Chroma Chroma Chroma Chroma Decoder Decoder Decoder Decoder Decoder Decoder Decoder Decoder DC Tran RY Drive Pre Over RU Drive RV Drive Delay SCP BGR SCP BGF 0-7 0-31 0-3 0-31 0-31 0-3 0-3 0-3 Fix Fix Fix Fix Fix Fix Fix Fix 4 19 1 8 8 0 1 1 4 19 1 8 8 1 1 6 19 1 8 8 0 1 1 6 19 1 8 8 1 1

DA CXA1315
239 240 241 242 243 IDPX ICOL ISHP ISCO ISCL D/A Converter N-S Correction Color Sharpness Sub Chroma Decoder Sub Cont Sub Chroma Decoder Sub Color 0-63 0-255 0-255 0-31 0-31 Fix Fix Fix Fix Fix 32 120 120 15 1 32 120 1 32 120 120 15 15 32 120 15

D1 CXD2085
244 245 XJGL LNJ1 XJGLK LNJ1 0,1 0,1 Fix Fix 0 0 0 0 0 0 0 0

CC CXP85856A
246 247 248 249 250 251 252 253 254 255 256 257 CRIL CFLD CCDI CRIP CRIT CSB1 CSB2 CREP CDSD CCDS CHMK CHSY CCD CCD CCD CCD CCD CCD CCD CCD CCD CCD CCD CCD CRI Pulse Compare Data Low Caption Fixed-Field Count No CCD Interrupt CRI & Parity Error CRI Time Constant Sync Slice Bias 1 Sync Slice Bias 2 CRI Signal End Position Data Start Delay Caption Data Threshold P8-HMASK P8-HSYC 0-15 0-15 0-7 0-7 0-3 0-3 0-7 0-256 0-31 0-31 0-63 0-255 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 2 5 3 4 0 3 4 142 8 9 42 136 2 5 3 4 0 3 4 142 8 9 42 136 2 5 3 4 0 3 4 142 8 9 42 136 2 5 3 4 0 3 4 142 8 9 42 136

OP CXP85856A
258 DISP OSD Position 0-63 Fix 1 1 1 1

No.

Register Name

Description

Data Range

Adj/Fix

Initial Data
NTSC PAL-M PAL-N TV/AUX S/VIDEO 1-3 VIDEO 4

Average Data
NTSC PAL-M PAL-N TV/AUX S/VIDEO 1-3 VIDEO 4

ID

ID MAP
259 260 261 262 263 264 265 266 IDCT IRYD IPRE IRUD IRVD IDLV ISCR ISCF NVM ID 0 NVM ID 1 NVM ID 2 NVM ID 3 NVM ID 4 NVM ID 5 NVM ID 6 NVM ID 7 0-7 0-31 0-3 0-31 0-31 0-3 0-3 0-3 Fix by model Fix by model Fix by model Fix by model Fix by model Fix by model Fix by model Fix by model 89 55 175 96 203 181 6 9 89 55 175 96 203 181 6 9
SERVICE IDO

63 55 175 64 251 181 6 0
WRITE

63 55 175 64 251 181 6 0

31 63 175 192 251 181 6 112

Note: Items 1-266 show adjustment order

-- 18 --

KV-29FV16A

4-4. A BOARD ADJUSTMENTS SUB BRIGHT ADJUSTMENT
1. 2. 3. 4. 5. Set to Service Adjustment Mode. Input a grey scale pattern signal. Set the PICTURE to minimum, and BRIGHT to normal. Select SBRT with 1 and 4 . Adjust SUB BRIGHT level with 3 and 6 so that the stripe second from the right is faintly visible. 6. Write into memory by pressing MUTING then ENTER .

V. SIZE ADJUSTMENT (VSIZ)
1. 2. 3. 4. 5. Input a monoscope signal. Set to Service Adjustment Mode. Select VSIZ with 1 and 4 . Adjust with 3 and 6 for the best vertical size. Write into memory by pressing MUTING then ENTER .

V. SIZE

white second from the right

V. POSITION ADJUSTMENT (VPOS)
1. 2. 3. 4. 5. Input a monoscope signal. Set to Service Adjustment Mode. Select VPOS with 1 and 4 . Adjust with 3 and 6 for the best vertical center. Write into memory by pressing MUTING then ENTER .

black

SUB CONTRAST ADJUSTMENT (RDRV)
1. Input a 75% color-bar signal. 2. Set to: VIDEO mode = Standard, COLOR = Minimum, PICTURE = 100%, GON = 0 (OFF), BON = 0 (OFF) 3. Set to Service Adjustment Mode and connect an oscilloscope to pin 1 of CN351 on the A Board. 4. Set RDRV with 1 and 4 . 5. Adjust with 3 and 6 for: 1.85 ± 0.05 Vp-p. 6. Write into memory by pressing MUTING then ENTER .
White

V. POSITION

H. SIZE ADJUSTMENT (HSIZ)
1. 2. 3. 4. 5. Input a monoscope signal. Set to Service Adjustment Mode. Select HSIZ with 1 and 4 . Adjust with 3 and 6 for the best horizontal size. Write into memory by pressing MUTING then ENTER .

1.85 ± 0.05Vp-p

H. SIZE
Black

SUB HUE, SUB COLOR ADJUSTMENT (SHUE, SCOL, 4SHU, 4COL)
Note: SCOL and SHUE are for all other inputs (NTSC/PAL M/PAL N) 4SHU and 4COL are for Video 4 input (NTSC/PAL M/PAL N) 1. Input a 75% color-bar signal. 2. Set to Service Adjustment Mode and set: VIDEO mode = Standard, PICTURE = 100%, COLOR = 50%, HUE = 50%. 3. Connect an oscilloscope to Pin 3 of CN351 on the A Board. 4. Select SHUE and SCOL with 1 and 4 . 5. Adjust with 3 and 6 for the V1 = V4 (SCOL) and V2 = V3 (SHUE). 6. Write SHUE data one step down from even condition to NVM. SCOL is adjusted by SHUE compensation. 7. Write into memory by pressing MUTING then ENTER . 8. Repeat Steps 1-7 for 4SHU and 4COL.
V1 V2 V3 V4

H. POSITION ADJUSTMENT (HPOS)
HPOS Range is from 0~15. 1. Input a monoscope signal. 2. Set to Service Adjustment Mode. 3. Select HPOS with 1 and 4 . 4. Adjust with 3 and 6 for the best horizontal center. 5. Write into memory by pressing MUTING then ENTER .

H. POSITION

-- 19 --

KV-29FV16A

V LINEARITY (VLIN), V CORRECTION (VSCO), PIN AMP (PAMP) AND TRAPEZIUM (TRAP) ADJUSTMENTS
1. 2. 3. 4. 5. Input a cross-hatch signal. Set to Service Adjustment Mode. Select VLIN, VSCO, PAMP, and TRAP with 1 and 4 . Adjust with 3 and 6 for the best picture. Write into memory by pressing MUTING then ENTER . V LINEARITY(VLIN)

OSD POSITION ADJUSTMENT (DISP)
1. 2. 3. 4. 5. Input a color-bar signal. Set to Service Adjustment Mode. Select DISP with 1 and 4 . Adjust with 3 and 6 for the bar center. Write into memory by pressing MUTING then ENTER .
SERVICE AFC 1000 0000 0

VS CORRECTION (VSCO)

ROTATION COIL ADJUSTMENT
1. 2. 3. 4. 5. Input a monoscope signal. Push MENU on the Remote (RM-Y171). Select the "Set-up" mode. Select "Tilt Correction". Confirm that number (0) color changes to red. Push (+) on the Remote. Confirm that the number increases up to +5 and the picture rotates clockwise. 6. Push (-) on the Remote. Confirm that the number decreases down to -5 and the picture rotates counter-clockwise. 7. Push (+) on the Remote. Return the value to 0.

PIN AMP (PAMP)

TRAPEZIUM (TRAP)

V ANGLE (VANG), V BOW (VBOW), UPPER UPPER PIN (UCPN) AND LOW PIN (LCPN) ADJUSTMENTS
1. 2. 3. 4. 5. Input a cross-hatch signal. Set to Service Adjustment Mode. Select VANG, VBOW, UCPN, and LCPN with 1 and 4 . Adjust with 3 and 6 for the best picture. Write into memory by pressing MUTING then ENTER . V ANGLE (VANG)

SET-UP

+5

Channel Set-up Favorite Channel Video Label

V BOW (VBOW) Language: English Tilt Correction Menu UPPER PIN (UCPN)

-5
LOW PIN (LCPN)

-- 20 --