Text preview for : DA-4X.pdf part of SONY DA-4X Sony DA-4X SERVICE MODE
Back to : DA-4X.pdf | Home
SERVICE MANUAL
MODEL NAME REMOTE COMMANDER DESTINATION
DA-4X CHASSIS
CHASSIS NO.
KP-57WV600
RM-Y188
US/Canada
SCC-P92D-A
COLOR REAR VIDEO PROJECTOR
9-965-926-01
KP-57WV600/57WV700/ 65WV600/65WV700
2-10. ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER
All of the circuit adjustments can be made by using the remote commander (RM-Y188). NOTE : The following test equipment is required: 1. Pattern Generator (with component outputs) 2. Frequency counter 3. Digital multimeter 4. Audio oscillator
7. If you want to go back to the most recently saved value, press "0" then "ENTER" to read the memory. 8. Press "MUTING" then "ENTER" to write the new adjustment data into memory. 9. Turn power off when you want to exit the service mode. Note: Press "8" then "ENTER" on the remote commander to restore the factory settings for user controls and channel memories (this will also turn set off and then on to exit the service mode).
2-10-2.MEMORY WRITE CONFIRMATION METHOD
1. After adjustment, turn the power off with the remote commander. 2. Turn the power ON and set to service mode. 3. Cycle through the adjusted items again and confirm that the adjustments were saved.
2-10-1.METHOD OF ENTERING THE SERVICE ADJUSTMENT MODE
SERVICE MODE PROCEDURE 1. TV must be in Standby mode. (Power off) 2. Press "DISPLAY", "5", "VOL +", then "POWER" on the remote commander. (Press each button within 1 second of pressing the previous button.) SERVICE MODE ADJUSTMENT
Item NO. Category Data
2-10-3.ADJUSTING BUTTONS AND INDICATOR
Note: When the PJE mode (which displays an internally generated signal) is activated, several buttons on the remote commander will have different functions than the ones listed below. Therefore, when in the PJE mode, refer to section 2-12-3 for button functions.
Adjustment Item
3D-COMB 0 0 SERVICE TV NRMD WSL : XXX F / A FLAG : XXXXXXXX CBA FLAG : XXXXXXXX
MUTING TV/VIDEO Category up Adjustment item up Adjustment item down Test Reset WIDE MODE INDEX VOLUME
POWER ANT PIC MODE Data up Data down Category down ENTER TWIN VIEW
3. 4. 5. 6.
The screen displays the item being adjusted within that category. Press 1 or 4 on the remote commander to select the adjustment item Press 3 or 6 on the remote commander to change the data Press 2 or 5 on the remote commander to select the adjustment category Every time you press 2(Category up), service mode changes in the order shown below:
AUDIO VERSION 3D-COMB 2103-1 2103-2 2170P-1 2170P-2 2170P-3 2170P-4 2170D-1 2170D-2 2170D-3 SNNR 2170D-4 CCP 2170D-5 3DNR D-CONV DRCV 2151 MID1 MID2 MID3 MID5 CXA350GR PJED FDIS PJED ROGH GRN CENT OP ID
DISPLAY
RM-Y188
-- 19 --