Text preview for : F10_usermanual_uk.pdf part of Navman F10 User manual for Navman F10
Back to : F10_usermanual_uk.pdf | Home
F10
User Manual
en
English - Europe/Australia/New Zealand
F10
Important Safety Information
PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle's safety or make it illegal to operate in some jurisdictions. Follow all product instructions and all instructions in your vehicle owner's manual regarding accessories or modifications. Consult your country's and/or state's laws regarding operation of a vehicle with any accessories or modifications. It is your sole responsibility to place, secure and use the Navman in a manner that will not cause accidents, personal injury or property damage. Always observe safe driving practices. Do not mount the Navman or attach the antenna in a way that may interfere with the safe operation of the vehicle, the deployment of air bags or other safety equipment. Do not operate the Navman while driving. Before you use your Navman for the first time, familiarize yourself with your device and its operation. On main roads, the distance to an exit calculated by the Navman may be further than the distance shown on road signs. Road signs show the distance to the start of an exit while your Navman shows the distance to the next intersection, i.e., the end of the exit ramp or road. To prepare to exit a road, always follow distance information on road signs. The use of information regarding safety or speed camera locations may be subject to local laws in the country of use. You are responsible for checking that you can legally use the information in your country or in the country where the information will be used.
Do not handle the Navman while it is hot. Let the product cool, out of direct sunlight.
Do not expose the Navman to direct sunlight in an unattended vehicle for prolonged periods. Overheating may damage the unit.
To discourage theft, do not leave the Navman, mounting bracket or any cables in plain view in an unattended vehicle.
AC Adapter-specific safety information
To charge your Navman from the mains power, use the mains power charger (Model: PSAA05R-050; Input: 100-240V AC 50-60Hz; Output: 5V DC 1A Max) supplied by Navman as an accessory (may be sold separately). Using other mains power chargers with your Navman could result in serious injury or property damage. Never use the charger if the plug or cord are damaged. Do not expose the charger to moisture or water. Do not use the charger in a high moisture environment. Exposure to water may cause electrical sparks or fires. Never touch the charger when your hands or feet are wet. Allow adequate ventilation around the charger when using it to operate your Navman or charge the Navman internal battery. Do not cover the charger with paper or other objects that will reduce ventilation. Do not use the charger while it is inside a carrying case or other container. Ensure that the charger is connected to a power source with the correct fitting and voltage requirements. The voltage requirements can be found on the mains power charger casing and/or packaging. Do not attempt to service the charger as this could result in personal injury. Replace the charger if it is damaged or exposed to excess moisture.
2
F10
Internal battery-specific safety information
The Navman contains a non-replaceable internal lithium-ion polymer battery. The battery may burst or explode if mishandled, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery. Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery in fire or water.
Only use the correct mains power charger (sold separately) or in-vehicle charger supplied by Navman to charge the Navman internal battery. Only use the Navman internal battery with the Navman unit. The Navman battery will stop charging when the ambient temperature is less than 0ºC (32ºF) or more than 45ºC (113ºF).
Warning Notice to Drivers in California and Minnesota
State law prohibits drivers in California and Minnesota from mounting objects on their windshields while driving. Other Navman mounting options are recommended and an alternative mounting option is included in this box. Navman does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71. Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Navman disclaims all liability for installation or use of the Navman that causes or contributes to death, injury or property damage or that violates any law.
3
F10
Contents
Important Safety Information..................................................................................................................2 Welcome................................................................................................................................................6 Important information for using the manual .......................................................................................6 Getting to know your Navman ................................................................................................................7 Components .....................................................................................................................................7 How do I get started?.............................................................................................................................8 How do I turn my Navman on for the first time? ................................................................................8 How do I adjust the volume?...........................................................................................................10 How do I monitor the battery status?...............................................................................................10 How do I turn my Navman off?........................................................................................................11 What are the main screens I will use?..................................................................................................12 Main Menu screen ..........................................................................................................................12 Map screens ...................................................................................................................................12 How do I navigate with GPS? ..............................................................................................................13 How do I go from A to B? .....................................................................................................................14 What if I miss a turn? ......................................................................................................................14 How do I search for an address? ....................................................................................................15 Case Study: How do I search for an address?............................................................................15 Using the Keyboard screen ........................................................................................................17 Using the Destination Search screen..........................................................................................17 How do I create a trip with multiple stops? ......................................................................................19 Case Study: How do I navigate to multiple addresses? ..............................................................19 How do I skip a waypoint during a multi-stop trip? ......................................................................23 How do I search for a Point of Interest (POI)?.................................................................................24 Case Study: How do I search for a Point of Interest?..................................................................24 How do I save Favourites and My Home?............................................................................................27 How do I save a Favourite or My Home? ........................................................................................27 How do I navigate to a Favourite?...................................................................................................28 How do I navigate to My Home? .....................................................................................................28 How do I edit the name of a Favourite? ..........................................................................................29 How do I delete a Favourite? ..........................................................................................................29 How do I navigate to a recent location? ...............................................................................................30 How do I view my route?......................................................................................................................31 3D Map screen ...............................................................................................................................31 2D Map screen ...............................................................................................................................33 Route Overview screen...................................................................................................................35 Turn-by-Turn screen .......................................................................................................................37 How do I use the Map Menu? .........................................................................................................39 How do I avoid an area? .................................................................................................................40 How do I add an Avoid Area? .....................................................................................................40 How do I delete an Avoid Area? .................................................................................................40 How do I delete all Avoid Areas? ................................................................................................40 How do I preview a route? ..............................................................................................................41 What can I customize?.........................................................................................................................42 Route Options.................................................................................................................................43 Route Calculation 1/4 .................................................................................................................43 Road Types 2/4 ..........................................................................................................................44 Driver Alerts 3/4..........................................................................................................................45 Data Recording 4/4.....................................................................................................................46 Map Display ....................................................................................................................................47 Map Display 1/3..........................................................................................................................47 Map Display 2/3..........................................................................................................................48
4
F10
Select Map 3/3............................................................................................................................49 Map POIs........................................................................................................................................50 Volume ...........................................................................................................................................51 Screen ............................................................................................................................................52 POI Alerts .......................................................................................................................................53 GPS ................................................................................................................................................54 GPS Status.................................................................................................................................54 Setting your GPS mode ..............................................................................................................55 Language........................................................................................................................................56 Power .............................................................................................................................................57 Keyboard ........................................................................................................................................58 How does predictive text (abc, def...) work?...............................................................................58 Units ...............................................................................................................................................59 Units 1/2 .....................................................................................................................................59 Units 2/2 .....................................................................................................................................60 Start-up...........................................................................................................................................61 Saved Info.......................................................................................................................................62 Tutorial............................................................................................................................................63 About ..............................................................................................................................................64 Shop Demo.....................................................................................................................................64 What is NavDesk? ...............................................................................................................................65 Can I use NavDesk with my computer? ......................................................................................65 How do I install a map for the first time? .....................................................................................65 How do I install NavDesk onto my computer?.................................................................................66 NavDesk features ...........................................................................................................................67 How do I keep NavDesk up-to-date? ..............................................................................................68 NavDesk Preferences.................................................................................................................68 My Maps .........................................................................................................................................69 How do I install maps onto my Navman?....................................................................................70 How do I install maps from DVD? ...............................................................................................70 How do I remove maps from my Navman? .................................................................................72 How do I know which map contains a particular city or town?.....................................................72 My Map Preferences...................................................................................................................72 What is a Major Road Network map? .........................................................................................73 NavAlbum .......................................................................................................................................74 Toolbar .......................................................................................................................................75 How do I use NavAlbum?................................................................................................................76 How can I view and edit pictures or albums on my computer?....................................................76 What else can I do with pictures and albums on my computer?..................................................76 NavAlbum Preferences...............................................................................................................77 Image Search .................................................................................................................................78 How do I download NavPix from the internet? .........................................................................78 How do I import NavPix to NavAlbum? ....................................................................................78 My subscriptions .............................................................................................................................79 Alerts ..........................................................................................................................................79 How do I install Safety Camera information? ..............................................................................79 How do I know which Safety Camera information is available? ..................................................79 Purchase a Subscription.............................................................................................................79 Activate your Subscription ..........................................................................................................80 How do I update Safety Camera information on my Navman?....................................................80 Voice Transfer .....................................................................................................................................81 How do I install a voice file?........................................................................................................81 How do I remove a voice file?.....................................................................................................81 PIN Security....................................................................................................................................82 How do I register my Navman and set a PIN? ............................................................................82 How do I remove the PIN from my Navman?..............................................................................82 What if I forget the PIN for my Navman? ....................................................................................83 How do I backup my Navman? .......................................................................................................84 Reference ............................................................................................................................................85 How do I insert a Memory Card?.....................................................................................................85 How do I remove a Memory Card? .............................................................................................85 Point of Interest categories .............................................................................................................86 For more information............................................................................................................................90
5
F10
Welcome
Thank you for purchasing this Navman. This manual has been prepared to guide you through the operation of your Navman from first set-up through to continuous use. Please read this manual carefully before using your Navman for the first time. Keep this manual in a safe place and use as your first point of reference.
Important information for using the manual
It is important to understand the terms and typographical conventions used in this manual.
Formatting
The following formatting in the text identifies special information: Convention
Bold Italics
Type of Information
Navman components or items displayed on screen, including buttons, headings, field names and options. Indicates the name of a screen.
Icons
The following icons are used throughout this manual: Icon Description
Case study
Warning
Terms
The following terms are used throughout this manual to describe user actions. Term
Press Press and hold Tap Tap and hold Select
Description
Press and release a button quickly. Press and hold a button for 2-3 seconds. Press and release an item displayed on the touch screen. Tap and hold an item displayed on the touch screen for 2-3 seconds. Tap an item in a list or tap a command from a menu.
6
F10
Getting to know your Navman
We recommend that you familiarize yourself with the Navman's basic operations.
Components
Component
Battery Indicator
Description
Indicates the level of battery charge: Green - battery full Orange - battery charging. Turns the Navman on or off. For more information, see" How do I turn my Navman off?" on page 10.
Connection socket for GPS MMCX External Antenna (not included). To access the socket, gently lift the rubber cover. Connection socket for the following: Cradle USB cable to connect to your computer In-vehicle charger to charge from a vehicle power socket Mains power charger to charge from an indoor power socket Note: The mains power charger may be purchased separately. Slot for memory card. The memory card must be inserted with the label facing the front of your Navman. For more information, see "How do I insert a Memory Card?" on page 85. Note: Memory cards may be sold separately. Speaker For voice commands and warnings. Use the Volume preference screen to increase or decrease the volume.
7
F10
How do I get started?
Note: Before you begin, check if your vehicle is fitted with a heat-reflective or heated windscreen. If so, you may need to purchase an external antenna for your Navman to receive GPS signals. The first time you use your Navman, it may take up to 15 minutes to establish a GPS connection. For more information about GPS, see "How do I navigate with GPS?" on page 16.
How do I turn my Navman on for the first time?
To get started for the first time, complete the following steps: 1. 2. Read the Important Safety Information on page 3 Position your Navman Follow the instructions below to position your Navman in your vehicle:
Note: Ensure that your Navman does not obstruct the driver's view, or interfere with the operation of the vehicle airbags and safety devices.
8
F10
3.
Turn your Navman on to turn your Navman on. Press and hold Your Navman will turn on and display the Language screen.
4.
Select your preferred language From the Select Language screen, tap your preferred language.
To prevent the Select Language screen from displaying on each start-up, clear the Show on start-up check box. You can change your preferred language while using your Navman (see "Language" on page 56). 5. Read the warning message a) b) The Safety Agreement screen will display after you have selected your preferred language. Read the Safety Agreement message. To confirm that you have read and understood the message, tap Accept. The Tutorial will display.
Note: If you have maps installed from multiple continents, you may be prompted to select the maps you require. To use maps from a different continent at a later time, you can select a different continent via the Change Continent screen in the Map Display preferences; refer to page 49.
6.
View the Tutorial When you have accepted the Safety Agreement, the first Tutorial screen will display. To prevent the Tutorial from displaying again on start-up, clear the Show on start-up check box. To move forward through the Tutorial screens, tap . To view the previous screen, tap .
To view the Tutorial again while using your Navman, see "Tutorial" on page 63. When you have finished the Tutorial, the 3D Map screen will display. If you have a GPS fix, your current location will be displayed on the map.
9
F10
How do I adjust the volume?
The volume on your Navman can be adjusted by the volume control on the Volume preference screen. To mute the volume from the map screens, tap To adjust the volume, tap and hold and then tap .
to display the Volume preference screen.
For more information on how to adjust the volume on your Navman, see "Volume" on page 51.
How do I monitor the battery status?
Your Navman has an internal battery that when fully charged, should provide power for up to 3 hours. The battery indicator light on the top of the Navman indicates the level of internal battery charge: Green - battery full Orange - battery charging You can monitor battery power status on the Power screen. To access the Power screen, tap and hold on the map screens.
How do I charge the battery?
The Battery Status bar displays External Power while the battery is charging; when the battery is fully charged, the Battery Status bar will display at 100%. To charge your Navman in a vehicle, plug the in-vehicle charger into other end into the vehicle power socket. on the bottom of your Navman and the
To charge your Navman using your computer, plug the large end of the USB cable directly into a USB port on your computer (not a USB hub) and plug the small end into on the bottom of your Navman. To begin ). charging, ensure your Navman is turned off (press To charge your Navman using a mains power socket, plug the mains power charger cable into bottom of the Navman and the mains power charger power pack into the power socket.
Note: The mains power charger is not included with all models and may be purchased separately.
on the
10
F10
How do I turn my Navman off?
To turn your Navman off, press and hold .
Power-saving standby mode
To enter standby mode, press To end standby mode, press . again.
When your Navman enters standby mode, the screen will turn off. When you turn your Navman on again, it will display the screen you were last viewing. To save power, your Navman will automatically enter standby mode after a pre-determined period of time. You can change the default standby mode setting at the Power preference screen. For more information, see "Power" on page 57.
Note: If battery power is very low, your Navman will enter a standby mode whether you have set a pre-determined period of time or not.
11
F10
What are the main screens I will use?
Main Menu screen
The Main Menu screen is your starting point for searching for a destination. The Main Menu can be accessed from the map screens by tapping any screen. or by tapping the status bar at the bottom of
Map screens
There are four map screens used to view the route to your destination: 3D Map 2D Map Route Overview Turn-by-Turn The Map screens can be accessed from the Main Menu screen by tapping Map screen, or the map screen you were last viewing. You can cycle through the different map screens by pressing will display briefly as you cycle through). . The Map button displays the 3D
on any map screen (the name of the map screen
For more information on the map screens, see "How do I view my route?" on page 31. For information on using the Map menu from the 3D Map and 2D Map screens, see "How do I use the Map Menu?" on page 39.
12
F10
How do I navigate with GPS?
The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Navman, to determine an exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time, only four signals are required to provide a position or "GPS fix" (latitude and longitude), for vehicle navigation systems.
How does my Navman receive GPS signals?
Your Navman receives GPS signals via the internal GPS antenna. To guarantee the optimum GPS signal strength, ensure your Navman is outdoors, or in a vehicle outdoors, and has an unobstructed view of the sky. GPS reception is not usually affected by weather, however, very heavy rain or snow may have a negative effect on your reception.
How do I view my GPS status?
You can view your GPS status at any time from the map screens or the Viewfinder screen. displays green when a GPS fix is established and red when a GPS fix is unavailable. To indicate the reception strength of a GPS fix, displays between one and four green vertical bars.
Note: Before you begin, check if your vehicle is fitted with a heat-reflective or heated windscreen. If so, you may need to purchase an external antenna for your Navman to receive GPS signals. The first time you use your Navman, it may take up to 15 minutes to establish a GPS connection.
To view your GPS status in more detail, see "GPS Status" on page 54. To set your GPS mode, see "Setting your GPS mode" on page 55. For more information about GPS, refer to the GPS Navigation - Frequently Asked Questions guide at support.navman.com.
13
F10
How do I go from A to B?
Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. When you ...
know the address of your destination
Then ...
use the address-entry wizard to enter the address see "How do I search for an address?" on page 15.
want to make multiple stops
use the Multi-stop Trip Planner screen to enter multiple waypoints see "How do I create a trip with multiple stops?" on page 19.
need to find a named site, feature, landmark or public venue
search for a Point of Interest see "How do I search for a landmark or venue?" on page 24.
WARNING For your safety, enter destination information before you start a journey. Do not enter a destination while driving.
What if I miss a turn?
Back-On-TrackTM Automatic Rerouting You will be redirected if you make a wrong turn. A message informing you that your route is being re-calculated will display at the top of the screen. To cancel a route re-calculation tap . A warning will display, asking you to confirm the cancellation. If confirmed, both the re-calculation and your current route will be cancelled.
14
F10
How do I search for an address?
Enter a destination using the Destination Search, Keyboard and Preview screens, which used together form an address-entry wizard. This section provides a case study to help guide you through setting your destination.
Note: In some countries, you can search for your destination by postcode or zip code. If you are in the United Kingdom, and you know the postcode of your destination, you can search for it from the Destination Search screen by tapping Postcode, then entering a postcode of up to eight characters.
Quick Steps
1. 2. 3. 4. 5. 6. Open the Destination Search screen Select the country Search for the city/area Search for the street Search for the house number Tap .
Case Study: How do I search for an address?
This case study will show you how to enter an address and how to navigate to it. The address we will be using in this example is:
Note: The below address is fictitious and used as an example only.
1 Navman Westminster London SW1A 2AG, United Kingdom
Tip: Before you enter your destination address, ensure that you have set your route preferences. For more information, see "Route Options" on page 43.
1. Open the Destination Search screen
The Destination Search screen will display.
Note: If this is the first time you are setting your destination and you have maps from more than one country installed, then the Select Country screen will display instead of the Destination Search screen. Go directly to step 2b. The next time you perform this procedure, the Destination Search screen will open as expected.
15
F10
2. Select the country
Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3.
a)
From the Destination Search screen, tap The Select a country screen will display.
.
b)
Select United Kingdom from the list. The Destination Search screen will display.
3. Search for the City/Area
a) From the Destination Search screen, tap City/Area. The Keyboard screen will display.
b)
Use the Keyboard screen to search for Horley as the city or area of your destination, then tap the search result. The Destination Search screen will display.
4. Search for the street name and house number
a) From the Destination Search screen, tap Street Address. The Keyboard screen will display.
16
F10
Using the Keyboard screen
The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results will be listed in matching order, with the closest matches appearing at the top of the list. A maximum of 99 results will display. The Keyboard screen can display with various layouts depending on the information you need to enter, including alphabet, number, alternate characters and combinations of these. You can also choose the type of keyboard you prefer from alphabetic, QWERTY and keypad. For more information, see "Select Keyboard" on page 58.
As you select each character, the first two results will display. Tap
, then scroll to see more search results.
To select a character or a search result, tap the character or search result. To delete a character, tap .
To display more characters, tap 123, alt or abc, if available.
Using the Destination Search screen
The Destination Search screen is used to select your destination by area, street, postal or ZIP code, Points of Interest, intersection, city, area, state or country.
As you specify each part of the address, it will display at the top of the screen. The available options will change to reflect the parts of the address still to be completed.
17
F10
b)
Use the Keyboard screen to enter Navman Street as the street name of your destination, then tap the search result.
Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results ordered by their city or area name.
c)
Use the Keyboard screen to enter 12 as the house number of your destination. The Preview screen will display.
Note: If house numbers are available, but not the one that you require, you may have to choose the same street in a neighbouring area. Press and select another search result. If house numbers are not available for your selected section of the street the Preview screen will display.
d)
Complete one of the following: If you want to ...
Navigate to your selected destinationn . tap Your route is calculated; the 3D Map screen will display. view the position on the map screen view more information about your destination tap the map to display the position on the 2D Map screen. tap More. The Destination Details screen will display. tap Add. The Multi-stop Trip Planner screen will display. The address is listed as a waypoint on the multi-stop trip. See "How do I create a trip with multiple stops?" on page 19. tap Save. The New Favourite screen will display. tap Save as Home. tap Save. The New Favourite screen will display. tap Save as Favourite.
Then ...
add the destination to a multi-stop trip
save the destination as My Home
save the destination as a favourite
18
F10
How do I create a trip with multiple stops?
You can use the Multi-stop Trip Planner screen to set multiple stops or waypoints for your trip. Your route will be calculated to go via each of these points in the specified order. Waypoints can be added via the Multi-stop Trip Planner screen or by selecting Location, then Add to Trip from the pop-up Map menu on the 2D Map or 3D Map screen. You can save up to 198 multi-stop trips, each with up to 14 waypoints.
Note: Waypoints added, updated or deleted after a multi-stop trip has commenced will not affect the current route.
Quick Steps
1. 2. 3. 4. 5. 6. Start your Multi-stop trip Select the country Search for the city/area Search for the street and house number Add additional waypoints Tap .
Case Study: How do I navigate to multiple addresses?
This case study will show you how to set a multi-stop trip by entering multiple waypoints. The address we will be using in this example is:
Note: The below address is fictitious and used as an example only.
1 Navman Westminster London SW1A 2AG, United Kingdom.
Tip: Before you enter your destination address, ensure that you have set your route preferences. For more information, see "Route Preferences" on page 43.
1. Open your Multi-stop Trip screen
The Multi-stop Trip Planner screen will display.
19
F10
a)
Tap Add. The Add to Trip Menu will display.
b)
Tap Address. The Destination Search screen will open.
Note: You can also add waypoints using favourites, recent destinations and POI locations.
2. Select the country
Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3.
a)
From the Destination Search screen, tap The Select a country screen will display.
.
b)
Select United Kingdom from the list. The Destination Search screen will display.
3. Search for the City/Area
a) From the Destination Search screen, tap City/Area. The Keyboard screen will display.
b)
Use the Keyboard screen to search for Horley as the city or area of your destination, then tap the search result. The Destination Search screen will display.
20
F10
4. Search for the street name and house number
a) From the Destination Search screen, tap Street Address. The Keyboard screen will display.
b)
Use the Keyboard screen to enter Navman Street as the street name of your destination, then tap the search result.
Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results ordered by their city or area name.
c)
Use the Keyboard screen to enter 12 as the house number of your destination. The Preview screen will display.
Note: If house numbers are available, but not that you require, you may have to choose the same street in a neighbouring area. If house numbers are not available for your selected section of the street the Destination Preview screen will display.
d)
Tap Add. The waypoint is automatically saved and the Multi-stop-Trip screen will display.
e)
Complete one or more of the following: If you want to ...
add another waypoint Note: Waypoints added after a multi-stop trip has commenced will not be included in the current route.
Then ...
tap Add. The Add To Trip Menu will display. return to step 1a.
21
F10
If you want to ...
navigate to your selected destination
Then ...
tap . The Preview screen will display. . tap The 3D Map screen will display the calculated route.
change the order of your waypoints
tap a destination point to move. The Preview screen will display. tap Up or Down. The Multi-stop Trip Planner screen will redisplay. tap Clear. tap a destination point to delete. The Preview screen will display. tap Delete. The Multi-stop Trip Planner screen will redisplay. tap Save. The New Favourite screen will display. tap Save as Favourite. The Favourite will be saved.
delete all waypoints delete one waypoint
save the multi-stop trip as a favourite
22
F10
How do I skip a waypoint during a multi-stop trip?
To skip a waypoint during a multi-stop trip, complete the following: 1. Tap the map. The Map Menu will display.
2.
Tap Route, then Skip Waypoint. The next waypoint will be skipped and the route recalculated to the following waypoint.
23
F10
How do I search for a Point of Interest (POI)?
A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as petrol stations, parks, beaches and museums. Select a POI using the Destination Search, Keyboard and Preview screens, which used together form a POI-entry wizard. This section provides a case study to help guide you through finding or setting your POI as a destination.
Quick Steps
1. 2. 3. 4. 5. Open the Destination Search screen Select a country Search for the City/Area Search for a POI Tap .
Case Study: How do I search for a Point of Interest?
This case study will show you how to enter an address and navigate to it. The address used in this example is:
Note: The below address is fictitious and used as an example only.
Waterloo Railway Station 75 Waterloo Road Lambeth London SE1 8UD United Kingdom.
1. Open the Destination Search screen
The Destination Search screen will display.
Note: If this is the first time you are setting your destination and you have maps from more than one country installed, then the Select Country screen will display instead of the Destination Search screen. Go directly to step 2b. The next time you perform this procedure, the Destination Search screen will open as expected.
24
F10
2. Select the country
Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3.
a)
From the Destination Search screen, tap The Select a country screen will display.
.
b)
Select United Kingdom from the list. The Destination Search screen will display.
3. Search for the city/area
a) From the Destination Search screen, tap City/Area. The Keyboard screen will display.
b)
Use the Keyboard screen to search for London as the city or area of your destination, then tap the search result. The Select POI Category screen will display.
Tip: The list of categories is divided into Enabled Categories which are set to display an icon on the map screens, and Other POI Categories which will not display an icon.
4. Search for a POI
a) Either tap Search by name to search in all POI categories, or select a category from the list. The Keyboard screen will display.
25
F10
b)
Use the Keyboard screen to search for Waterloo Railway Station as your destination, then tap the search result. The Preview screen will display.
c)
Complete one of the following: If you want to ...
navigate to your selected destination . tap Your route is calculated and displayed on the 3D Map screen. view your position on the map screen view more information about your destination add the destination to a multi stop trip tap the map to display the position on the 2D Map screen.. tap More. The Destination Details screen will display. tap Add. The Multi-stop Trip Planner screen will display. The address is listed as a waypoint on the multi-stop trip. See "How do I create a trip with multiple stops?" on page 19. tap Save. The New Favourite screen will display. tap Save as My Home. tap Save. The New Favourite screen will display. tap Save as Favourite.
Then ...
save the destination as My Home
save the destination as a Favourite
26
F10
How do I save Favourites and My Home?
You can save up to 200 destinations as favourites, one of which can be saved as My Home. You can save a favourite from the Preview screen after searching for an address, or from the Map Menu on the 3D or 2D Map screens. For more information, see "How do I use the Map Menu?" on page 39.
How do I save a Favourite or My Home?
1. 2. Search for an address until the Preview screen is displayed. Tap Save. The New Favourite screen will display.
3.
To change the name of the favourite, tap The Keyboard screen will display.
.
4. 5.
After you have entered a name for the favourite, tap The New Favourite screen will display. Complete one of the following: If you want to ...
save as a Favourite save as My Home
.
Then ...
tap Save as Favourite. The favourite is saved. The Preview screen will display. tap Save as My Home. The favourite is saved as My Home. The Preview screen will display.
27
F10
How do I navigate to a Favourite?
1. Tap the Favourite destination you want to travel to. The Preview screen will display.
2.
Tap . Your Navman will calculate the route from your current location. The 3D Map screen will display.
How do I navigate to My Home?
If you have not set an address as My Home, the first time you try to navigate to My Home you will be prompted to search for an address using the address-entry wizard.
Option 1 - Via the Main Menu
Your Navman will calculate the route from your current location. The 3D Map screen will display.
Option 2 - Via the Favourite Destinations screen
1.
From the Favourite Destinations screen, select My Home. The Preview screen will display.
2.
. Tap Your Navman will calculate the route from your current location. The 3D Map screen will display.
28
F10
How do I edit the name of a Favourite?
1. From the Favourite Destinations screen, select a favourite to edit. The Favourite Preview screen will display.
2.
Tap Edit. The Edit Name screen will display.
3. 4. 5.
To edit the name of the favourite, tap
. .
After you have edited the favourite name, tap The Edit Name screen will display. Complete one of the following: If you want to ...
rename the Favourite save as My Home
Then ...
tap Save. The favourite is saved. The Favourite Preview screen will display. tap Save as My Home. The favourite is saved as My Home. The My Home Preview screen will display.
How do I delete a Favourite?
1. From the Favourite Destinations screen, select a favourite to delete. The Preview screen will display.
2.
Tap Delete. The favourite is deleted. The Favourite Destinations screen will display.
29
F10
How do I navigate to a recent location?
To make navigating to an address easier, your Navman will automatically save all your start locations and destinations in a list of recent locations.
1.
Tap a recent location. The Preview screen will display.
2.
Complete one of the following: If you want to ...
calculate the route and open the 3D Map screen Tap . The 3D Map screen will display. view the full address details of the recent location save the recent location as My Home tap More. The Recent Destination Details screen will display. tap Save. The New Favourite screen will display. tap Save as My Home. tap Save. The New Favourite screen will display. tap Save as Favourite.
Then ...
save the recent location as a favourite
30
F10
How do I view my route?
When a route has been calculated, the 3D Map screen will display. You will be directed to your destination by spoken and visual instructions.
The Map button cycles through the 3D Map, 2D Map, Route Overview and Turn-by-Turn screens.
3D Map screen
The 3D Map screen displays your current position and follows your direction of travel. Tap and drag the screen, to move across the map. Tap the map to view the Map Menu (see "How do I use the Map Menu?" on page 39).
Item
Next instruction Direction and distance of next turn Route Current position
Description
The direction and name of the street to turn in to. The direction and distance of your next turn. Note: To repeat the spoken prompt of your next turn, tap the turn arrow. Your current route is highlighted.
Your current position is marked with Speed indicator Status bar
.
Speed indicator displays when you exceed your set speed limit. For more information, see "Driver Alerts 3/4" on page 45. Displays one of the following: The name of the street you are located on Speed warnings Active POIs. Tap to display the Main Menu screen.
Main Menu
The Main Menu button allows you to enter an address for your destination and customize preferences. Tap to expand and see the following options: Time km/h or mph (Speed) TTG (Time to Go) DTG (Distance to Go) ETA (Estimated Time of Arrival). Tap to cycle through the options. Note: During a Multi-stop trip, Time to Go, Distance to Go and ETA will display as: Time to Waypoint, Distance to Waypoint and ETA at Waypoint.
Distance and Time Information
Cancel route
Cancels your current route.
31
F10
Item
Zoom
Description
To view zoom options, tap To zoom out, tap To zoom in, tap . . .
Map Mute/unmute volume, battery, GPS and compass information
The Map button allows you to cycle through different map screens.
Tap
to expand and see the following options: Mute/unmute volume Battery charge indicator GPS status indicator The icon displays green when a GPS fix is established and red when a GPS fix is unavailable. To indicate the reception strength of a GPS fix between one and four green vertical bars are displayed. Compass indicator
32
F10
2D Map screen
The 2D Map screen shows your current position (if a GPS fix is active) and surrounding street names. If a route has been calculated, the route and turns are highlighted. The 2D Map screen follows your direction of travel unless the Map Display preference is set to North (see "Map Display" page 48). Tap and drag the screen, to move across the map. Tap the map, to view the Map Menu (see "How do I use the Map Menu?" on page 39).
Item
Route Next instruction Direction and distance of next turn Current position
Description
Your current route is highlighted. The direction and name of the street to turn in to. The direction and distance of your next turn. Note: To repeat the spoken prompt of your next turn, tap the turn arrow. Your current position is marked with .
Status bar
Displays one of the following: The name of the street you are located on Speed warnings Active POIs. Tap to display the Main Menu screen.
Main Menu
The Main Menu button allows you to enter an address for your destination and customize preferences.
Distance and Time Information
Tap to expand and see the following options: Time km/h or mph (Speed) TTG (Time to Go) DTG (Distance to Go) ETA (Estimated Time of Arrival). Tap to cycle through the options. Note: During a Multi-stop trip, Time to Go, Distance to Go and ETA will display as: Time to Waypoint, Distance to Waypoint and ETA at Waypoint.
Cancel route Zoom
Cancels your current route. To view zoom options, tap To zoom out, tap To zoom in, tap . . .
33
F10
Item
Map Mute/unmute volume, battery, GPS and compass information
Description
The Map button allows you to cycle through different map screens.
Tap
to expand and see the following options: Mute/unmute volume Battery charge indicator GPS status indicator The icon displays green when a GPS fix is established and red when a GPS fix is unavailable. To indicate the reception strength of a GPS fix between one and four green vertical bars are displayed. Compass indicator
34
F10
Route Overview screen
The Route Overview screen gives you a bird's eye view of your trip.
Note: A route must first have been calculated for this screen to be available.
Tap and drag the screen, to move across the map. Tap the map to view the Map Menu (see "How do I use the Map Menu?" on page 39).
Item
Description
Your final destination.
Next instruction
The direction and name of the street to turn in to. Note: To repeat the spoken prompt of your next turn, tap the turn arrow.
Direction and distance to next turn Route Scale bar Main Menu Status bar
The direction and distance of your next turn. Note: To repeat the spoken prompt of your next turn, tap the turn arrow. Your current route is highlighted. Displays map scale. The Main Menu button allows you to enter an address for your destination and customize preferences. Displays one of the following: The name of the street you are located on Speed warnings Active POIs. Tap to display the Main Menu screen.
Current position Distance and Time Information
Your current position is marked with
; if visible.
Tap to expand and see the following options: Time km/h or mph (Speed) TTG (Time to Go) DTG (Distance to Go) ETA (Estimated Time of Arrival). Tap to cycle through the options. Note: During a Multi-stop trip, Time to Go, Distance to Go and ETA will display as: Time to Waypoint, Distance to Waypoint and ETA at Waypoint.
Cancel route
Cancels your current route.
35
F10
Item
Zoom
Description
To view zoom options, tap To zoom out, tap To zoom in, tap . . .
Map Mute/unmute volume, battery, GPS and compass information
The Map button allows you to cycle through different map screens.
Tap
to expand and see the following options: Mute/unmute volume Battery charge indicator GPS status indicator The icon displays green when a GPS fix is established and red when a GPS fix is unavailable. To indicate the reception strength of a GPS fix between one and four green vertical bars are displayed. Compass indicator
36
F10
Turn-by-Turn screen
The Turn-by-Turn screen displays the next four turns of your route, the turn direction, the street name and the distance to the turn. You can view all the turns in the list, using the up and down arrows. A route must first have been calculated for this screen to be available.
Item
Direction of turn
Description
The direction of the turn. Your next turn is highlighted. Note: To Repeat the spoken prompt of your next turn, tap the turn arrow.
Distance to turn Instruction Next turn Upcoming turns Main Menu Status bar
The distance to your next turn. Your next turn is highlighted. The direction and name of the street to turn in to. Your next turn is highlighted. Your next turn is at the top of the list. The direction and distance of upcoming turns. Displays the Main Menu screen. Displays one of the following: The name of the street you are located on Speed warnings Active POIs. Tap to display the Main Menu screen..
Distance and Time Information
Tap to expand and see the following options: Time km/h or mph (Speed) TTG (Time to Go) DTG (Distance to Go) ETA (Estimated Time of Arrival). Tap to cycle through the options. Note: During a Multi-stop trip, Time to Go, Distance to Go and ETA will display as: Time to Waypoint, Distance to Waypoint and ETA at Waypoint.
Scroll buttons Map
Allow you to view each turn by moving up and down through the list. The Map button allows you to cycle through different map screens.
37
F10
Item
Mute/unmute volume, battery, GPS and compass information
Description
Tap
to expand and see the following options: Mute/unmute volume Battery charge indicator GPS status indicator The icon displays green when a GPS fix is established and red when a GPS fix is unavailable. To indicate the reception strength of a GPS fix between one and four green vertical bars are displayed. Compass indicator
38
F10
How do I use the Map Menu?
The Map Menu allows you to access navigational functions from the 3D Map and 2D Map screens.
Displaying the Map Menu
1. 2. 3. Tap to display the 3D Map or 2D Map screen.
Tap and drag to move around the map to your selected location. Tap the map. The Map Menu will display.
Map Menu options
The following options are available via the Map Menu: Menu Option
Navigate To Show Details
Description
Calculates a route from your current location, if your Navman has a GPS fix. Displays the Preview screen from where you can: View details of the location Add the location to your multi-stop trip Save the location as a favourite Navigate to the location.
Nearest POI Add to Trip Route
Displays the Select POI Category screen. Select the Category, then Search for a POI to navigate to. For further information, see "How do I search for a Point of Interest?" on page 24. Adds the location to your multi-stop trip. Note: This option is only available when navigating a route. Displays the Route sub-menu from where you can: Set as Start. Sets the location as your departure point. Demonstrate. Starts the route demonstration, demonstrating navigation from your current position or departure point. Stop Demonstration. Stops the route demonstration. Skip Waypoint. Skips the next stop on your multi-stop trip. Show Summary. Displays a summary of your route, including your departure and destination addresses, total distance and total estimated time to your destination. Detour. Detours your route to avoid the next 1, 2, 5, 10 or 20 kilometres or the next 1, 2, 5, 10 or 20 miles.
Avoid Area Un-Avoid Area
Allows you to add an Avoid Area by tapping and dragging the map. Deletes the selected Avoid Area.
39
F10
How do I avoid an area?
Your Navman can calculate a route that avoids a specified area on the map. Avoid Areas are displayed as shaded areas.
CAUTION If no alternative route around an Avoid Area exists, the route calculation will fail. CAUTION If your destination is in an Avoid Area, you will be routed into that Avoid Area.
How do I add an Avoid Area?
1. 2. 3. Tap the 3D Map or 2D Map screen to display the Map Menu. Select Avoid Area. Tap and drag to set the Avoid Area to the correct size and position. The Avoid Area is added.
How do I delete an Avoid Area?
1. 2. 3. Find the Avoid Area that you want to delete. Tap the Avoid Area to display the Map Menu. Select Un-Avoid Area. The Avoid Area is deleted.
How do I delete all Avoid Areas?
The Saved Information screen will display. 1. 2. Tap Delete Avoid Areas. When the Caution dialog-box opens, tap Yes to confirm. All Avoid Areas are permanently deleted.
40
F10
How do I preview a route?
Route demonstration allows you to: Preview a route. Plan and view a route without a GPS fix, such as when you are inside a building. The following steps will show you how to preview one route. To always preview your route, see "Data Recording 4/4" on page 46.
1. Select a departure point
If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route to start elsewhere. a) Tap the 3D Map or 2D Map screen at your departure point. The Map Menu will display.
b) c)
Tap Route. The Route submenu will display. Tap Set As Start. The Map Menu will close, and the selected point is set as your departure point.
2. Select a destination point
Set a destination either by using the address entry wizard or by using the Map Menu: a) b) c) Locate your destination. Tap your destination to display the Map Menu. Tap Navigate To. The Map Menu will close and the map screen will display the calculated route.
3. Demonstrate the route
Once the route has been determined, you can demonstrate the route by completing the following: a) b) c) Tap the map screen to display the Map Menu. Tap Route. The Route submenu will display. Tap Demonstrate. The 3D Map screen will display the calculated route in Route Demonstration mode.
41
F10
What can I customize?
There are various customization options available to enhance your navigation experience. The Preferences menu screens are accessed by pressing
To move forward through the Preferences screens, tap To revisit the previous screen, tap .
.
42
F10
Route Options
You can enhance your navigation experience by modifying aspects of your route and route calculation.
Route Calculation 1/4
Complete the following: If you want to...
change the route type
Then...
move the Route Type slider towards Fastest time to give high priority to the fastest time when calculating a route. move the Route Type slider towards Shortest distance to give high priority to the shortest distance when calculating a route.
change the preference for motorways
move the Preference for Motorways slider towards Less often to use roads other than motorways where possible when calculating a route. Note: This option may not completely remove Motorways from a route. move the Preference for Motorways slider towards More often to use motorways where possible when calculating a route.
Your preferences are automatically saved.
43
F10
Road Types 2/4
Complete the following: If you want to...
avoid toll roads receive a warning if your route includes toll roads avoid unsurfaced roads receive a warning if your route includes unsurfaced roads avoid ferry routes receive a warning if your route includes ferry routes
Then...
select the Toll roads check box in the Avoid column. select the Toll roads check box in the Warn column. The warning will display at the start of every trip containing a toll road. select the Unsurfaced roads check box in the Avoid column. select the Unsurfaced roads check box in the Warn column. The warning will display at the start of every trip containing unsurfaced roads. select the Ferry routes check box in the Avoid column. select the Ferry routes check box in the Warn column. The warning will display at the start of every trip containing ferry routes.
Your preferences are automatically saved.
44
F10
Driver Alerts 3/4
Complete the following: If you want to...
enable a visual warning if the Main Menu screen is accessed in a moving vehicle enable a warning chime when travelling at or above a designated speed select your preferred speed
Then...
select the Warn me not to operate my Navman while driving check box. select the Alert me when my speed exceeds check box. select your preferred speed from the Speed box.
Your preferences are automatically saved.
45
F10
Data Recording 4/4
Complete the following: If you want to...
record a GPS log of your trips
Then...
select the Enable GPS data logging check box.
Your preferences are automatically saved.
46
F10
Map Display
You can change the look and behaviour of the Map screens by customizing the Map Display preferences.
Map Display 1/3
Complete the following: If you want to...
change the map colour scheme set the screen contrast to automatically adjust improve screen contrast in light or dark conditions
Then...
select your preferred scheme from the Map Scheme box. select the Auto day/night option. select either the Day or the Night option to manually adjust the contrast.
Your preferences are automatically saved.
47
F10
Map Display 2/3
Complete the following: If you want to...
enable automatic zooming during navigation display North at the top of the 2D Map screen
Then...
select the Auto-zoom on main map screens check box. If selected, the 3D Map and 2D Map screens will automatically zoom in or out, depending on your speed, to allow optimal viewing of your route. select the Keep North at top of 2D Map screen check box. Note: If not selected, the direction you are travelling in will display at the top of the 2D Map screen. select the Show no-entry road signs check box.
display "no entry" icons on "no entry" roads on the 2D Map and 3D Map screens
Your preferences are automatically saved.
48
F10
Select Map 3/3
Complete the following: If you want to...
use maps from a different continent
Then...
select a different continent from the maps you are currently using. When selected, the maps for the new continent will load and the 3D Map screen will display.
Your preferences are automatically saved.
49
F10
Map POIs
Points of Interest (POIs) are grouped into categories. You may choose to either display (or hide) icons of all POI categories on the map screens, or only display the icons from selected categories. For example, you may only be interested in entertainment venues and want to disable other categories such as schools.
Complete the following: If you want to...
display all POI icons (ie, icons from all categories) display no POI icons select a specific POI category icon for display on the map screens
Then...
Tap Turn All On. Tap Turn All Off. select the required POI category checkbox; repeat until all required categories are selected.
Your preferences are automatically saved.
50
F10
Volume
Complete the following: If you want to...
increase or decrease the volume
Then...
move the Volume slider towards High to increase the volume. move the Volume slider towards Low to decrease the volume.
hear a tone when you tap the touch screen hear keyboard characters spoken to you
select the Audio check box. select the Speak keyboard letters check box.
Your preferences are automatically