Text preview for : 8560MFP_Service.pdf part of xerox phaser 8400-8600 service manual
Back to : 8560MFP_Service.part01.ra | Home
Phaser 8560MFP Multifunction Product Service Documentation
701P01133 October 2006
Phaser 8560MFP Multifunction Product Service Documentation Phaser 8560MFP Multifunction Product Service Manual 705P01133 Bus Updated November 1, 2006, Reissue 10/2006 Xerox Corporation XOG Worldwide Product Training & Information 26600 Parkway - Bldg. 60 P.O. Box 1000, M/S 7060-776 Wilsonville, OR 97070-1000 NOTICE: All service documentation is supplied to Xerox external customers for informational purposes only. Xerox service documentation is intended for use by certified, product trained service personnel only. Xerox does not warrant or represent that such documentation is complete, nor does Xerox represent or warrant that it will notify or provide to such customer any future changes to this documentation. Customer performed service of equipment, or modules, components or parts of such equipment may affect the warranty offered by Xerox with respect to such equipment. You should consult the applicable warranty for its terms regarding customer or third party provided service. If the customer services such equipment, modules, components or parts thereof, the customer releases Xerox from any and all liability for the customer actions, and the customer agrees to indemnify, defend and hold Xerox harmless from any third party claims which arise directly or indirectly from such service. Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. Xerox technical training materials and service manuals are intended for use by authorized Xerox service technicians and service partners only and are not for resale. These materials may not be distributed, copied or otherwise reproduced without prior written consent from Xerox Corporation. XEROX®, The Document Company®, the digital X®, CentreWare®, infoSMART®, Made For Each Other®, PagePackTM, Phaser®, PhaserSMART®, and Walk-UpTM are trademarks of Xerox Corporation in the United States and/or other countries.
Acrobat®, Adobe® Reader®, Adobe Type Manager®, ATMTM, Illustrator® PageMaker®, Photoshop®, PostScript®, Adobe Brilliant® Screens, Adobe Garamond®, Adobe JensonTM, Birch®, Carta®, IntelliSelect®, Mythos®, Quake®, and Tekton® are trademarks of Adobe Systems Incorporated in the United States and/or other countries. Apple®, AppleTalk®, Bonjour®, EtherTalk®, LaserWriter®, LocalTalk®, Macintosh®, Mac OS®, TrueType®, Apple Chancery®, Chicago®, Geneva®, Monaco®, New York® , and QuickDraw® are trademarks of Apple Computer, Inc. in the United States and/or other countries. HP-GL®, HP-UX®, and PCL® are trademarks of Hewlett-Packard Corporation in the United States and/or other countries. IBM® and AIX® are trademarks of International Business Machines Corporation in the United States and/or other countries. Windows®, VistaTM, Windows ServerTM, and Wingdings® are trademarks of Microsoft Corporation in the United States and/or other countries. Novell®, NetWare®, NDPS®, NDS®, Novell Directory Services®, IPXTM, and Novell Distributed Print ServicesTM are trademarks of Novell, Incorporated in the United States and/or other countries. SunSM, Sun MicrosystemsTM, and SolarisTM are trademarks of Sun Microsystems, Incorporated in the United States and/or other countries. SWOP® is a trademark of SWOP, Inc. UNIX® is a trademark in the United States and other countries, licensed exclusively through X/ Open Company Limited. PANTONE® Colors generated may not match PANTONE-identified standards. Consult current PANTONE Publications for accurate color. PANTONE® and other Pantone, Inc. trademarks are the property of Pantone, Inc. © Pantone, Inc., 2000.
Initial Issue Phaser 8510/8560MFP Multifunction Product
10/2006 ii
Introduction
Introduction
About This Manual .......................................................................................................... Organization.................................................................................................................... Power Safety................................................................................................................... Service Safety Summary................................................................................................. Moving the System.......................................................................................................... Symbology and Nomenclature ........................................................................................ Electrostatic Discharge Precautions ............................................................................... Regulatory Specifications................................................................................................ Phaser 8510/8560MFP Overview ................................................................................... System Configurations .................................................................................................... Parts of the Product ........................................................................................................ Control Panel Layout....................................................................................................... Specifications .................................................................................................................. iii iii iv iv vi vii ix ix x xi xii xiv xvi
Initial Issue Phaser 8510/8560MFP Multifunction Product
10/2006 iii
Introduction
Introduction
10/2006 iv
Initial Issue Phaser 8510/8560MFP Multifunction Product
About This Manual
The Phaser 8510/8560MFP Multifunction Product Service Manual is the primary document used for diagnosing, repairing, maintaining, and troubleshooting the system. It is the controlling publication for a service call. Information on its use is found in the Introduction of the Service Documentation. To ensure understanding of this product, complete the Xerox Service Training Program for this particular system. For manual updates, Service Bulletins, knowledge base, and technical support, visit www.xerox.com/office/support.
Organization
The titles of the sections and a description of the information contained in each section are contained in the following paragraphs:
Introduction and General Information
This section contains documentation organization, symbology and nomenclature, translated warnings, safety symbols, regulatory specifications, and general information about the printer.
Section 1 Service Call Procedures
This section contains procedures to be taken during a service call and in what sequence they are to be completed. This is the entry level for all service calls.
Service Manual Revision
Updates are issued as the system changes or as corrections are identified.
Section 2 Status Indicator RAPs
This section contains descriptions of the diagnostic aids for troubleshooting that include Power On Self Test (POST), Built-in Self Tests (BIST), and Fault Code error procedures.
Section 3 Image Quality
This section contains the diagnostic aids for troubleshooting image quality problems, as well as image quality specifications and image defect samples.
Section 4 Repairs/Adjustments
This section contains all the removal, replacement, and adjustments procedures. Repairs Repairs include procedures for removal and replacement of spare parts listed in the Parts List. Use the repair procedures for the correct order of removal and replacement, for warnings, cautions, and notes. Adjustments Adjustments include procedures for adjusting the parts that must be within specification for the correct operation of the system. Use the adjustment procedures for the correct sequence of operation for specifications, warnings, cautions and notes.
Section 5: Parts Lists
This section contains the illustrated Parts List.
Section 6: Diagnostic Information
This section contains details of the embedded Service Diagnostics test suite, as well as troubleshooting procedures for system problems not related to a specific fault code.
Section 7: Wiring Data
This section contains drawings, lists of plug/jack locations, and diagrams of the power distribution wire networks in the machine. Individual wire networks are shown in the Circuit Diagrams contained in Section 2. This section also contains the Block Schematic Diagrams.
Section 8: Theory of Operation
This section contains detailed functional information on the print engine components. Initial Issue Phaser 8510/8560MFP Multifunction Product Introduction
10/2006 v
About This Manual, Organization
Power Safety
Power Source
For 115 VAC printers, do not apply more than 135 volts RMS between the supply conductors or between either supply conductor and ground. For 230 VAC printers, do not apply more than 254 volts RMS between the supply conductors or between either supply conductor and ground. Use only the specified power cord and connector. This manual assumes that the reader is a qualified service technician. Plug the three-wire power cord (with grounding prong) into a grounded AC outlet only. If necessary, contact a licensed electrician to install a properly grounded outlet. If the product loses its ground connection, contact with conductive parts may cause an electrical shock. A protective ground connection by way of the grounding conductor in the power cord is essential for safe operation.
Service Safety Summary
General Safety
The system and recommended supplies have been designed and tested to meet strict safety requirements. Attention to the following information will ensure the continued safe operation of the system. Electrical Safety · · · · · · Use the Power Cord supplied with the system. Plug the Power Cord directly into a properly grounded electrical outlet. Do not use a ground adapter plug to connect the system to an electrical outlet that does not have a ground connection terminal. Do not use an extension cord or power strip. Do not place the system in an area where people might step on the power cord. Do not place objects on the power cord Do not block the ventilation openings. These openings are provided to prevent overheating of the system. Do not drop paper clips or staples into the system.
Disconnecting Power WARNING
Turning the power off using the power switch does not completely de-energize the system. You must also disconnect the power cord from the system's AC inlet. Disconnect the power cord by pulling the plug, not the cord. Disconnect the power cord in the following cases: · · · · · · if the power cord or plug is frayed or otherwise damaged, if any liquid or foreign material is spilled into the product, if the printer is exposed to any excess moisture, if the printer is dropped or damaged, if you suspect that the product needs servicing or repair, whenever you clean the product.
· ·
WARNING
Avoid the potential of electrical shock by ensuring that the system is properly grounded. Electrical products may be hazardous if misused. The power cord is attached to the system as a plug-in device on the side of the system. If it is necessary to disconnect all electrical power from the system, disconnect the power cord from the electrical outlet.
WARNING
Do not remove the covers or guards that are fastened with screws unless you are installing optional equipment and are specifically instructed to do so. Power should be OFF when performing these installations. Disconnect the power cord when removing covers and guards for installing optional equipment. Except for user-installed options, there are no parts that you can maintain or service behind these covers
WARNING
The following are hazards to your safety: · · · 1. 2. 3. · · Damaged or frayed Power Cord Liquid spilled into the system Exposure to water or excessive moisture Turn off the Power Switch Disconnect the Power Cord from the electrical outlet. Call an authorized service representative. Do not attempt any maintenance procedure that is not specifically described in the documentation supplied with your system. Do not use aerosol cleaners. The use of supplies that are not approved may cause poor performance and could create a hazardous condition.
If any of these conditions occur, do the following:
Maintenance Safety
Introduction
Power Safety, Service Safety Summary
10/2006 vi
Initial Issue Phaser 8510/8560MFP Multifunction Product
·
Do not burn any consumables or routine maintenance items. For information on Xerox supplies recycling programs, go to www.xerox.com/gwa.
Servicing Electrical Components
Before starting any service procedure, switch off the printer power and unplug the power cord from the wall outlet. If you must service the printer with power applied, be aware of the potential for electrical shock.
Operational Safety The system and supplies were designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards. Pay attention to these safety guidelines to ensure the continued, safe operation of the system. · · Use the supplies specifically designed for your system. The use of unsuitable materials may cause poor performance and a possible safety hazard. Follow all warnings and instructions marked on, or supplied with, the system, options and supplies. CAUTION Use of other than Genuine Xerox Solid Ink may affect print and copy quality and system reliability. It is the only ink designed and manufactured under strict quality controls by Xerox for specific use with this system. The Xerox Warranty, Service Agreements, and Total Satisfaction Guarantee do not cover damage, malfunction, or degradation of performance caused by use of non-Xerox supplies or consumables, or the use of Xerox supplies not specified for this system. NOTE: The Total Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside these areas; please contact your local representative for details.
WARNING
Do not touch any electrical component unless you are instructed to do so by a service procedure.
Figure 1 Electrical Components Warning
General Guidelines
For qualified service personnel only: Refer also to the preceding Power Safety Precautions. Avoid servicing alone: Do not perform internal service or adjustment of this product unless another person capable of rendering first aid or resuscitation is present. Use care when servicing with power: Dangerous voltages may exist at several points in this product. To avoid personal injury, do not touch exposed connections and components while power is on. Disconnect power before removing the power supply shield or replacing components. Do not wear jewelry: Remove jewelry prior to servicing. Rings, necklaces and other metallic objects could come into contact with dangerous voltages and currents.
Servicing Mechanical Components WARNING
Do not try to manually rotate or manually stop the drive assemblies while any printer motor is running.
Figure 2 Mechanical Components Warning
Warning Labels
Read and obey all posted warning labels. Throughout the printer, warning labels are displayed on potentially dangerous components. As you service the printer, check to make certain that all warning labels remain in place.
Servicing Printhead Components WARNING
This system uses heat to fuse the image to media. The Printhead is VERY HOT. Turn the printer power off and wait at least 10 minutes for the Printhead to cool before you attempt to service the Printhead or adjacent components.
Safety Interlocks
Make sure all covers are in place and all interlock switches are functioning correctly after you have completed a printer service call. If you bypass an interlock switch during a service call, use extreme caution when working on or around the printer.
Initial Issue Phaser 8510/8560MFP Multifunction Product
10/2006 vii
Introduction
Service Safety Summary
Moving the System
WARNING
Parts of the system are hot. To avoid personal injury or damage to the system, allow the ink to solidify. Run the shut-down procedure to cool the system quickly. Wait at least 30 minutes for the system to cool completely before moving or packing it. · · · Allow the system to cool before it is moved to avoid ink spills which can damage the system. Use the shut-down procedure from the Control Panel before moving the system for best results. Never move the system if you receive a Power Down Error-Head not Parked message at the system's control panel. This message means the system is not ready to be moved. If the printhead is not locked, the system can be damaged during shipment. Always turn off the system using the power switch, located under the interface cover on the right side of the system, and unplug all cables and cords. Do not turn off the system by pulling the power cord or using a power-strip with an on/off switch. Always secure the scanhead shipping restraint on the left side of the scanner to lock the scanhead before removing the scanner portion of the system. Shipping the scanner with the scanhead unlocked can damage the scanner. Figure 2 System Lifting Technique · Always move the system separately from optional Trays 3 and 4.
·
·
When shipping the system, repack the system using the original packing material and boxes or a Xerox repackaging kit. Additional instructions for repacking the system are provided in the repackaging kit. If you do not have all the original packaging, or are unable to repackage the system, contact your local Xerox service representative CAUTION Failure to repackage the system properly for shipment can result in damage to the system. Damage to the system caused by improper moving is not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee.
Figure 1 Locking the Scanhead · · · Always remove the document feeder before shipping the system. Always remove the scanner before shipping the system. The system is heavy and must be lifted by two people. The illustration below shows the proper technique for lifting the system. Initial Issue Phaser 8510/8560MFP Multifunction Product
Introduction
Moving the System
10/2006 viii
Symbology and Nomenclature
The following reference symbols are used throughout the documentation.
Table 2 Additional Warnings REP 5.0.2 Scanner Power Supply REP 5.0.19 Drum Heater Relay Board
Warnings, Cautions, and Notes
Warnings, Cautions, and Notes will be found throughout the Service Documentation. The words WARNING or CAUTION may be listed on an illustration when the specific component associated with the potential hazard is pointed out; however, the message of the WARNING or CAUTION is always located in the text. Their definitions are as follows:
WARNING
HIGH VOLTAGE! DANGER: HAUTE TENSION! Exercise care when making the voltage check in the following steps. DANGER: Soyez extrêmement vigilant lorsque vous effectuez les tests de tension au cours des étapes qui suivent.
WARNING
A Warning is used whenever an operating or maintenance procedure, a practice, condition, or statement, if not strictly observed, could result in personal injury. CAUTION A Caution is used whenever an operating or maintenance procedure, a practice, condition, or statement, if not strictly observed, could result in damage to the equipment. NOTE: A Note is used whenever it is necessary to highlight an operating or maintenance procedure, practice, condition, or statement.
WARNING
Personal injury may result from grasping hot areas of Printhead. If a hot Printhead must be removed, grasp the Printhead by black plastic frame component. DANGER: Des blessures peuvent résulter si les zones chaudes du module de four sont touchées. Si un module de four chaud doit être enlevé, le saisir par l'élément en plastique noir du bâti.
Common Warnings and Safety Icons
The following common warnings are used throughout the documentation and the safety icons are displayed on the machine. Additional specific warnings are included for the listed sections. Common Warnings
Machine Safety Icons The following precautionary symbols may appear on the system. This symbol indicates DANGER high voltage.
WARNING
To avoid personal injury or shock, do not perform repair or adjustment activities with the power switch on or electrical power applied to the machine. DANGER: Afin d'éviter des blessures ou des chocs électriques, ne pas effectuer des activités de maintenance ou de réglage avec l'équipement sur Marche ou avec le cordon d'alimentation branché. The following sections have additional specific warning information. Table 1 Introduction and Section 4 Introduction - Symbology and Nomenclature Section 4 - Repairs and Adjustments Figure 1 High Voltage Symbol Protective ground (earth) symbol.
WARNING
A Warning is used whenever an operating or maintenance procedure, a practice, conditioning, or statement, if not strictly observed, could result in personal injury. DANGER: Une note DANGER est utilisée à chaque fois qu'une procédure de maintenance ou qu'une manipulation présente un risque de blessure si elle n'a pas été strictement observée. The following sections have additional specific warning information. Table 2 Additional Warnings REP 2.0.2 Print head Assembly REP 2.0.8 Left and Right Printhead Restraints Figure 3 Hot Surface Symbol Figure 2 Protective Ground (earth) Symbol These symbols indicate hot surface on or in the printer. Use caution to avoid personal injury.
Initial Issue Phaser 8510/8560MFP Multifunction Product
10/2006 ix
Introduction
Symbology and Nomenclature
The surface is hot while the printer is running. After turning off the power, wait 30 minutes.
Voltage Measurement and Specifications
Measurements of DC voltage must be made with reference to the specified DC Common, unless some other point is referenced in a diagnostic procedure. All measurements of AC voltage should be made with respect to the adjacent return or ACN wire. Table 3 Voltage Measurement and Specifications Voltage Specification 198 VAC TO 254 VAC 90 VAC TO 135 VAC 90 VAC TO 135 VAC +4.75 VDC TO +5.25 VDC +23.37 VDC TO +27.06 VDC
Figure 4 Wait 30 Minutes Symbol Avoid pinching fingers in the printer. Use caution to avoid personal injury.
INPUT POWER 220 V INPUT POWER 100 V INPUT POWER 120 V +5 VDC +24 VDC
Logic Voltage Levels
Figure 5 Pinch Injury Symbol Use caution (or draws attention to a particular component). Refer to the manual(s) for information. +5 VDC +24 VDC Measurements of logic levels must be made with reference to the specified DC Common, unless some other point is referenced in a diagnostic procedure. Table 4 Logic Levels Voltage H/L Specification H= +3.00 TO +5.25 VDC L= 0.0 TO 0.8 VDC H= +23.37 TO +27.06 VDC L= 0.0 TO 0.8 VDC
Figure 6 Use Caution Symbol
DC Voltage Measurements in RAPs
The RAPs have been designed so that when it is required to use the DMM to measure a DC voltage, the first test point listed is the location for the red (+) meter lead and the second test point is the location for the black meter lead. For example, the following statement may be found in a RAP: There is +5 VDC from TP7 to TP68. In this example, the red meter lead would be placed on TP7 and the black meter lead on TP68. If a second test point is not given, it is assumed that the black meter lead may be attached to the copier frame.
Electrostatic Discharge (ESD) Field Service Kit
The purpose of the ESD Protection Program is to preserve the inherent reliability and quality of electronic components that are handled by the Field Service Personnel. This program is being implemented now as a direct result of advances in microcircuitry technology, as well as a new acknowledgment of the magnitude of the ESD problem in the electronics industry today. This program will reduce Field Service costs that are charged to PWB failures. Ninety percent of all PWB failures that are ESD related do not occur immediately. Using the ESD Field Service Kit will eliminate these delayed failures and intermittent problems caused by ESD. This will improve product reliability and reduce callbacks. The ESD Field Service Kit should be used whenever Printed Wiring Boards or ESD sensitive components are being handled. This includes activities like replacing or reseating circuit boards or connectors. The kit should also be used in order to prevent additional damage when circuit boards are returned for repair. The instructions for using the ESD Field Service Kit can be found in ESD Field Service Kit Usage in the General Procedures section of the Service Documentation.
Introduction
Symbology and Nomenclature
10/2006 x
Initial Issue Phaser 8510/8560MFP Multifunction Product
Electrostatic Discharge Precautions
Some semiconductor components, and the respective sub-assemblies that contain them, are vulnerable to damage by Electrostatic discharge (ESD). These components include Integrated Circuits (ICs), Large-Scale Integrated circuits (LSIs), field-effect transistors and other semiconductor chip components. The following techniques will reduce the occurrence of component damage caused by static electricity. Be sure the power is off to the chassis or circuit board, and observe all other safety precautions. · Immediately before handling any semiconductor components assemblies, drain the electrostatic charge from your body. This can be accomplished by touching an earth ground source or by wearing a wrist strap device connected to an earth ground source. Wearing a wrist strap will also prevent accumulation of additional bodily static charges. Be sure to remove the wrist strap before applying power to the unit under test to avoid potential shock. After removing a static sensitive assembly from its anti-static bag, place it on a grounded conductive surface. If the anti-static bag is conductive, you may ground the bag and use it as a conductive surface. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage some devices. Do not remove a replacement component or electrical sub-assembly from its protective package until you are ready to install it. Immediately before removing the protective material from the leads of a replacement device, touch the protective material to the chassis or circuit assembly into which the device will be installed. Minimize body motions when handling unpacked replacement devices. Motion such as your clothes brushing together, or lifting a foot from a carpeted floor can generate enough static electricity to damage an electro-statically sensitive device. Handle IC's and EPROM's carefully to avoid bending pins. Pay attention to the direction of parts when mounting or inserting them on Printed Circuit Boards (PCB's).
Regulatory Specifications
Xerox has tested this product to electromagnetic emission and immunity standards. These standards are designed to mitigate interference caused or received by this product in a typical office environment.
United States (FCC Regulations)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with these instructions, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · · · · Reorient or relocate the receiver. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help.
·
· · ·
·
Any changes or modifications not expressly approved by Xerox could void the user's authority to operate the equipment. To ensure compliance with Part 15 of the FCC rules, use shielded interface cables.
Canada (Regulations)
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
· ·
European Union
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Xerox Corporation declares, under our sole responsibility, that the product to which this declaration relates is in conformity with the following standards and other normative documents:
Initial Issue Phaser 8510/8560MFP Multifunction Product
10/2006 xi
Introduction
Electrostatic Discharge Precautions, Regulatory
Table 1 Low Voltage Directive 73/23/EEC as amended EN 60950-1:2001 Table 2 Electromagnetic Compatibility Directive 89/336/EEC as amended EN 55022:1998 +A1:2000 +A2:2003 EN 55024:1998 +A1:2000 +A2:2003 EN 61000-3-2:2000 EN 61000-3-3:1994 IEC 61000-4-2:1995 IEC 61000-4-3:1995 IEC 61000-4-4:1995 IEC 61000-4-5:1995 IEC 61000-4-6:1996 IEC 61000-4-11:1994 This product, if used properly in accordance with the user's instructions, is neither dangerous for the consumer nor for the environment. A signed copy of the Declaration of Conformity for this product can be obtained from Xerox.
Phaser 8510/8560MFP Overview
The Phaser 8510/8560MFP uses a Printhead and four-color (YMCK) solid-ink sticks, with an image processor supporting PostScript 3 and PCL5c page description languages. The system is a high performance, Letter or A4, 24 (8510MFP) or 30 (8560MFP) page per minute (ppm) multifunction product, supporting resolutions up to 525 x 1200 dots-per-inch (dpi). The product features USB, Fax, and 10/100 base T Ethernet ports, with an optional Foreign Device Interface (FDI) for specialized installations. The 8510/8560MFP provides a 100-sheet Tray 1 from which specialty media, card stock, and envelopes are fed. Tray 1 also supports manual feeding. Tray 2 provides 525 sheets of capacity. The Output Tray holds 250 sheets facedown. On most configurations an Automatic Document Feeder (DADF) is installed providing enhanced document handling functionality. Phaser 8510/8560MFP options add memory, media capacity and functionality. RAM memory upgrades are available to raise installed memory to the 1 GB maximum. A 525-Sheet Feeder is also available. Two 525-Sheet Feeders may be installed to raise the maximum media input storage capacity to 1675 sheets. A Configuration Card stores system model identity and configuration parameters. After a predefined period of time since its last activity, the Phaser 8510/8560MFPP enters a power saver standby mode. All communications interfaces remain active and have the ability to wake the system up.
Figure 1 Phaser 8510/8560MFP Multifunction Product with Optional Trays
Introduction
Regulatory Specifications, Phaser 8510/8560MFP
10/2006 xii
Initial Issue Phaser 8510/8560MFP Multifunction Product
System Configurations
Standard Features
The Phaser 8510/8560MFP offers these standard features: · Maximum print speed (pages per minute) based on letter-size plain paper: NOTE: Print speeds for media fed from Tray 1 may be up to 50% slower. Table 1 Phaser 8510/8560MFP Print Speeds Phaser 8510MFP Multifunction Product PostScript Print Quality Modes: Fast Color: 24 ppm Enhanced: 12 ppm Phaser 8560MFP Multifunction Product PostScript Print Quality Modes: Fast Color: 30 ppm PCL Print Quality Modes: 300 x 600 dpi: 13 ppm · · · 600 x 600 dpi: 6 ppm Standard: 24 ppm Enhanced: 16 ppm High Resolution/Photo: 10 ppm
Product Options
Phaser Multifunction Product options include: · · · Additional Trays Memory System Cart
Additional Trays Trays 1 and 2 are standard on all configurations. The following additional tray combinations are supported: · · One 525-Sheet Feeder (Tray 3) Two 525-Sheet Feeders (Trays 3 and 4)
Memory All configurations have two memory slots supporting 512 MB, and 1 GB SODIMM modules (up to maximum of 1 GB DDR2). System Cart The System Cart supports a fully-optioned system and provides space for media storage.
PCL Print Quality Modes: 300 x 600 dpi: 16 ppm 600 x 600 dpi: 8 ppm
First-page-out: 8 seconds for color prints, 15 seconds for color copies Copy, Print, Scan, Fax capabilities (options vary according to configuration and memory) Connections: USB, Ethernet 10/100/1000 Base-Tx, RJ-11 Fax Modem, Foreign Device Interface
Metered Printing
Metered printing (PagePack), involves the combination of control software and specialized Ink Sticks to meter system activity for billing purposes. The Configuration page lists Metered Ink as Enabled when metering is enabled. Metered Operation When a metered printer is initialized at first power-up, the customer sets the printer to Metered operation using a unique, factory-supplied, 4-digit PIN. Once set to Metered operation, the control software performs the following: 8560MFP/X 512 MB Yes No Yes Yes Yes Yes** Yes Yes Yes Yes** NOTE: The Hidden Service menu provides an Enable Metered Ink option to restore the Metered mode parameters to NVRAM should they become lost or corrupt. Metered Ink To support metered printing, metered Ink Sticks are available in all four colors. The shape of the metered Ink Stick differs from the non-metered versions. 1. 2. 3. The Mode and PIN-entered values in Engine Control Board NVRAM are set. The Control Panel momentarily displays "Metered Ink is now enabled", then returns to "Ready" (if no other errors). The First Time Tips pages and the Configuration page are printed.
Available Configurations
Table 2 lists the standard configurations. Table 2 Phaser 8510/8560MFP Standard Configurations Features Memory Hard Drive Flash Disk Automatic 2-sided Printing (DADF) 525-Sheet Feeder System Cart Copy Scan to PC Scan to E-mail Scan to Hard Drive Fax 8510MFP/N 512 MB No Yes No No* No* Yes Yes Yes No Yes 8510MFP/D 512 MB (2x256) No Yes Yes No* No* Yes Yes Yes No Yes 8560MFP/D 512 MB Yes No Yes No* Yes Yes** Yes Yes Yes Yes** 8560MFP/T 512 MB Yes No Yes Yes Yes Yes** Yes Yes Yes Yes**
If an incorrect PIN is entered, "Incorrect numeric password" displays with a prompt "Retry" or "Do not retry." Retry returns to the enter prompt, "Do not retry" returns to the Replace Ink Stick error message. The error persists until the correct PIN is entered.
* This option can be purchased separately for this configuration. ** Hard Drive enables advanced features on this configuration.
Initial Issue Phaser 8510/8560MFP Multifunction Product
10/2006 xiii
Introduction
System Configurations
Parts of the Product
Front View
Open View
Figure 2 Open View 1. Figure 1 Front View 1. 2. 3. 4. 5. 6. 7. 8. 9. Tray 4 (optional) Tray 3 (optional) Tray 2 Tray 1 (MPT) Output Tray Exit Cover Control Panel Duplex Automatic Document Feeder (DADF) Front Cover DADF 2. 3. 4. 5. Output Tray Short Paper Stop Exit Cover Ink Loader Cover Scan Head Lock
10. Interface Cover 11. Drum Maintenance Kit and Waste Tray access 12. Front Door Latch
Introduction
Parts of the Product
10/2006 xiv
Initial Issue Phaser 8510/8560MFP Multifunction Product
Side View with Interface Connections
Figure 3 Side View with Interface Connections 1. 2. 3. 4. 5. 6. 7. 8. 9. Drum Maintenance Kit Waste Tray AC Power Cord Connection Power Switch Scanner Cable Connection USB Connection Ethernet Connection Configuration Card RJ-11 Fax Modem Connection 1. 2. 3. 4. RAM Connectors NVRAM Device Hard Drive Printer Stabilizer Figure 4 Back View
Back View - Electronics Module
The system's main electronics and power supply are enclosed in a metal case called the Electronics Module. The rear panel allows access to the electronics module, RAM, and NVRAM chips. The system's Hard Drive is mounted on the rear panel. NOTE: When replacing the electronics module, transfer these components to the new module. · · · · RAM Configuration Card NVRAM Device Hard Drive or Flash Disk
Initial Issue Phaser 8510/8560MFP Multifunction Product
10/2006 xv
Introduction
Parts of the Product
Routine Maintenance Items
Control Panel Layout
The Control Panel functions are segregated into three areas.
Figure 1 Control Panel Table 1 Control Panel Functional Areas Left Side Center Right Side
Copy, Scan, and Fax functions Display, Mode, Navigation but- Numeric keypad, Stop, Start, and indicator LEDs tons, and status LED's Clear, and Clear All buttons
Control Panel Left
The left side of the control panel contains the following copy, scan, and fax function buttons and LEDs. A lighted LED indicates the current selection. Figure 2 shows each function's location.
Figure 5 Routine Maintenance Items and Consumables Table 1 Routine Maintenance Life Expectancy Routine Maintenance Items Extended-Capacity Maintenance Kit Standard-Capacity Maintenance Kit Waste Tray DADF Pick Rollers and Separator Pad 30,000 cycles (0-20% coverage) 20,000 cycles (20-100%) coverage. 10,000 cycles Empty every 7 Purges 50,000 scans 1. 2. 3. 4. 5. 6. Introduction 10/2006 xvi Figure 2 Left Side Control Panel Color Mode selects black and white or color for copy or scan jobs. Document Type selects the type of document (photo, graphic, mixed text and graphics, or text only), for copy or scan jobs. Output Quality selects the output quality mode for copies: fast color, standard, enhanced, or high-resolution/photo. 2-Sided selects either one or 2-sided for the original and one- or 2-sided for the output. Lighten/Darken selects a setting for copy, scan, or fax jobs. Reduce/Enlarge selects scale percentage for output: 25, 50, 100, 150, 200, 400. Initial Issue Phaser 8510/8560MFP Multifunction Product
Parts of the Product, Control Panel Layout
7. 8. 9.
The Down Arrow reduces the reduce/enlarge percentage in one percent increments. The Up Arrow increases the reduce/enlarge percentage in one percent increments. Reduce/Enlarge Percentage display indicates the current educe/enlarge setting.
Control Panel Right
The right side of the Control Panel contains the numeric keypad, Start, Stop, and Clear buttons, as well as Fax control functions. Figure 4 shows each function's location.
Control Panel Center
The center of the Control Panel contains the display, mode and navigation buttons, as well as the status LED. Figure 3 shows each function's location.
Figure 4 Right Side Control Panel 1. 2. 3. Figure 3 Center Control Panel 4. 1. 2. 3. 4. 5. 6. 7. 8. 9. Copy displays the Copy menu. Scan displays the Scan menu. Print displays the Print menu. Fax displays the Fax menu. System displays the System Setup menu. Help(?) provides additional information about the menu or message displayed. OK accepts the highlighted menu selection. Down Arrow scrolls downward through menu selections. Up Arrow scrolls upward through menu selections. Mode Skip execution of POST diagnostics Print Service Diagnostics Map Reset PostScript NVRAM Password Bypass Enter Service Diagnostics Table 2 Short Cuts Press this selection at Power On OK INFO BACK+ON UP+DOWN BACK+? before the Xerox logo stops scrolling and until Beginning Service Mode appears. 5. 6. 7. 8. Numeric keypad for entering numbers for sending a fax, selecting a number of copies, or entering a numeric password. Start initiates the selected function (copy, scan. or fax). Stop pauses a print, copy, scan, or fax job. To cancel the job, follow the instructions indicated on the display. Clear All resets all job settings and returns to the top of the default function. Pause enters a pause in a fax number. Delayed Send stores a time for fax transmission. Send List to view or add fax numbers to a list. Speed Dial accesses directories of groups or individual fax numbers.
Control Panel Shortcuts
10. Back returns the previous menu to the display. 11. Control Panel display. 12. Status LED uses color to indicate these states of the current function: · · · · Green indicates the system is ready to print, copy, scan, or fax. Yellow indicates a warning condition. The system continues the operation. Red indicates a startup or operational error condition. Blinking indicates a warm-up or busy condition.
Initial Issue Phaser 8510/8560MFP Multifunction Product
10/2006 xvii
Introduction
Control Panel Layout
Specifications
Functional Specifications
Table 1 Functional Specifications Characteristic Printing Process Image System Color Medium Resolution Specifications Four-color (CMYK) solid ink Printhead architecture. Transfix transfer from oil coated Drum Cyan, Magenta, Yellow, and Black Ink Sticks Fast Color: 225 x 400 dpi Standard: 300 x 450 dpi Enhanced: 525 x 450 dpi Photo: 525 x 2400 dpi Color: 8 seconds Monochrome: 8 seconds Color and Monochrome: 12 minutes from Power On
Physical Dimensions and Clearances
Table 4 Print Engine Dimensions Height Width Depth Weight Value 620 mm (24.4 in.) 530 mm (20.9 in.) 660 mm (26.2 in.) 42 kg (93 lb.) Table 5 525-Sheet Feeder Dimensions Height Width Depth Weight Value 132 mm (5.2 in.) 422 mm (16.6 in.) 514 mm (20.24 in. 5.2 kg (11.5 lb.)
First Page-Out (from Ready) Warm-up Time
Memory Specifications
Table 2 Memory Specifications Characteristic Minimum RAM Maximum RAM Supported RAM Flash Disk Specifications 512 MB 1 GB Supports up to 1 GB of DDR2 memory using 2 slots 256 MB NAND Flash Storage in 8510MFP
Media Tray Capacity
Table 3 Tray Capacity Media and Weight Standard Paper Transparency Envelopes Weight Tray 1 100 Sheets 100 Sheets 50 75-220 g/m2 75-255* g/m2 Figure 1 Minimum Clearances Trays 2 and 3 525 Sheets 50 Sheets DADF 50 Sheets
The DADF accommodates sizes from 114 x 140 mm (4.5 x 5.5 in.) to 216 x 356 mm (8.5 x 14.0 in.). The weight range includes 60-120 g/m2 (16-32 lb. Bond) (22-45 lb. Cover).
Introduction
Specifications
10/2006 xviii
Initial Issue Phaser 8510/8560MFP Multifunction Product
Print Engine Specifications
Table 6 Print Engine Functional Specifications Characteristic Printing process Controller Color medium Specification Solid-ink 500 MHz processor Yellow, cyan, magenta, and black ink sticks, each shapecoded. The system uses the subtractive color system to produce the colors red, green, and blue Automatic, Black & White, Office: sRGB, Vivid Color, None, Press: Commercial, Euroscale, SWOP < 15 seconds per page/1st copy subsequent copies at printer speed. 2 slots; minimum 512 MB, maximum 1 GB, PC133 DRAM 137 PostScript 3 81 PCL5c From Off (cold start): 12 minutes From power saver: 4 minutes Characteristic Noise
Table 7 Scanner/DADF Functional Specifications Specification Standby: < or equal to 45 dB Scanning: < or equal to 50 dB
Electrical Specifications
Table 8 Electrical Specifications Characteristic Primary Line Voltages Primary Line Voltage Frequency Range Power Consumption at Rated Voltage Input Energy Star Scanner Power Supply Specification 90-135 VAC 180-254 VAC 47 - 63 Hz 300 W (average during printing) 1500 W (peak) - 1000 typical 220 W (idle) 70 W 30 W
Color Management
FPOT, Color Copy Memory Fonts Warm-up time
Scanner/DADF Specifications
Table 7 Scanner/DADF Functional Specifications Characteristic Printing Process Scan to Capabilities Scan/Copy Process Specification Print Engine Scan to Disk (mailbox) function Scan to PC Flatbed platen and C-shape ADF Charge Coupled Device scan head RGB color pack The scan controller provides 16 bit DMA interface for sending image data through the scanner board to the image processor board in the electronics module. DADF: 20 ppm simplex, 10 ppm duplex 2 MB (1M x 16 SDRAM) 32 MB SDRAM for Platen 128 MB SDRAM for DADF Reading: 48 bits Output: 24 bits 600 x 300 to 600 x 2400 dpi (FS x SS) Always equals optical resolution less than 2 seconds (performed prior to copier and scan operations) Scanner and DADF are switched OFF. Also, lamps automatically turn off after 20 minutes.
Environmental Specifications
Table 9 Environmental Specifications Characteristic Temperature Humidity Altitude Specification Operating 10 - 32 C / 50º - 90º F operating 10% - 80% RH Non-Condensing operating 0 to 2,438 meters (8,000 ft.)
º º
Storage -30°C to 60°C (-22 F to 140 F) 30% to 95% RH, non-condensing 0 to 6,092 meters (20,000 ft.) Standby Mode
Acoustic Noise (db) Operating Mode
Copies per Minute Memory Image Buffer Bit Depth Optical Resolution Output Resolution from Scanner Calibration Time Power Saver Mode
Initial Issue Phaser 8510/8560MFP Multifunction Product
10/2006 xix
Introduction
Specifications
Image Specifications
Table 10 Print Engine Only Skew Specifications Characteristic Printed Left Side Margin Leading Edge Margin Specification 5.0 mm + 2.0 mm (0.197 in. + .080 in.) 5.0 mm + 1.3 mm (0.197 in. + .050 in.)
Media Storage Guidelines If media handling problems are a common occurrence, review the following storage guidelines with the customer. · Store paper in dark, cool, relatively dry locations. Most paper items are susceptible to damage from ultraviolet (UV) and visible light. UV radiation, which is emitted by the sun and fluorescent bulbs, is particularly damaging to paper items. The intensity and length of exposure to visible light on paper items should be reduced as much as possible. Maintain constant temperatures and relative humidity Avoid light, heat, and dampness. Avoid attics, kitchens, garages, and basements for storing paper. Inside walls are drier than outside walls where moisture can collect. Store paper flat. Paper should be stored on pallets, cartons, shelves, or in cabinets. Avoid having food or drinks in the area where paper is stored or handled. Do not open sealed packages of paper until needed. Leave paper in the original packaging. For most commercial grades, the wrapper's inner lining protects the paper. Some specialty media is packaged inside sealed plastic bags. Leave the media inside the bag until needed; return unused media to the bag.
· NOTE: To derive the skew specification for a particular media size, measure the width of the leading edge in millimeters. Next, divide the measured length by 1000, then multiply by the appropriate Image Area Tolerance specification in milli-radians. For example, A 5 in. by 7 in. custom page would have a leading edge width, in millimeters, of 127mm (5 in.). Dividing the 127 by 1000 (127/1000), then multiplying the result by the 11 milli-radians specification results in a maximum skew of 1.4 mm (127/1000) x 11 = 1.4 mm. Table 11 System Skew Specifications Scan, Copy, Print Characteristic Printed Left Side Margin Leading Edge Margin Image Area Tolerance Zone Image Skew, Envelopes Image Skew, Index Card 15.5 milli-radians max across the width of the leading edge. 18.0 milli-radians max across the width of the leading edge. Specification 5.0 mm + 4.0 mm (0.197 in. + .157 in.) 5.0 mm + 3.3 mm (0.197 in. + .130 in.) · · · · · ·
DADF Media Guidelines The DADF accommodates sizes from 114 x 140 mm (4.5 x 5.5 in.) to 216 x 356 mm (8.5 x 14.0 in.), with weights within the following range: 60120 g/m2 (1632 lb. Bond) (2245 lb. Cover). Follow these guidelines when loading originals into the document feeder: · · · · · · · · Load originals face-up, so the top of the document enters first. Place only loose sheets of paper in the document feeder. Adjust the paper guides so they fit against the originals. Insert paper in the document feeder only when the ink on the paper is completely dry. Paper with paper clips or staples attached Paper with wrinkles, curls, folds, tears, or notches Coated or carbonless paper, transparencies, or items other such as cloth or metal Envelopes
Image Skew, All other sizes 11.0 milli-radians max across the width of the leading edge. Table 12 Image Specifications Characteristic Maximum Print Area Guaranteed Image Area Resolution/Gradation Specification 302 mm x 1194 mm 297 mm x 1194 mm Fast Color: 300 x 300 dpi Standard: 300 x 450 dpi Enhanced: 563 x 400 dpi Photo/Hi Res: 525 x 1200 dpi
Use the glass rather than the document feeder to copy or scan the following types of originals:
Supported Media The following sections provide information about paper sizes and weights that can be used in the system trays. For more detailed information about supported paper and other media, print the Paper Tips page: 1. 2. 3. 4. On the Control Panel, press the System button. Select Information, and then press the OK button. Select Information Pages, and then press the OK button. Select Paper Tips, and then press the OK button to print.
Media and Tray Specifications
The media trays accommodate most sizes and types of paper, transparencies, or other specialty media. Print the Paper Tips page for a list of supported media. Media that May Damage the System The system can use a variety of media for print and copy jobs. However, some media can cause poor output quality, increased jams, or damage. Unacceptable media includes: · · · · · Rough, plastic, or porous media Paper that has been stapled, folded, photocopied, or wrinkled Envelopes with windows, metal clasps, padding, or adhesives with release strips CD labels Media that is less than 60 g/m2 or more than 220 g/m2
See also: Recommended Media List at www.xerox.com/paper
Introduction
Specifications
10/2006 xx
Initial Issue Phaser 8510/8560MFP Multifunction Product
1 Service Call Procedures
Service Call Procedures.................................................................................................. Initial Actions ................................................................................................................... Routine Maintenance Activities ....................................................................................... Cleaning Procedures....................................................................................................... Final Actions.................................................................................................................... 1-3 1-4 1-5 1-5 1-6
Initial Issue Phaser 8510/8560MFP Multifunction Product
10/2006 1-1
Service Call Procedures
Service Call Procedures
10/2006 1-2
Initial Issue Phaser 8510/8560MFP Multifunction Product
Service Call Procedures
This section describes an overview of the steps a service technician should take, using this manual, to service the system and attached options. The system's diagnostic routines report problems using error messages and fault codes displayed on the Control Panel, logged in the Service Usage Profile, or by flashing LEDs. These error indications serve as the entry point into the troubleshooting process. System problems not directly indicated by or associated with an error message or fault code are covered in Section 6, General Procedures. Print-quality problems are covered in Section 3, Image Quality. The steps listed here are a guide for performing any service on this system. If you choose not to use these steps, it is recommended that you start at the appropriate troubleshooting procedure and proceed from there. When servicing the system, follow the safety measures detailed in Service Safety Summary. 1. Identify the problem. · · · · · · · · · 2. · · · 3. · · · · 4. · · 5. · Verify the reported problem does exist. Check for any error codes and write them down. Print normal customer prints and service test prints. Make note of any print-quality problems in the test prints. Make note of any mechanical or electrical abnormalities present. Make note of any unusual noise or smell coming from the printer. Print a Service Usage Profile, if the printer is able to print. View the Engine Error and Jam Histories under the Service Tools menu. Verify the AC input from the wall outlet is within specifications. Follow the cleaning instructions given in Section 6. Verify that the power cord is in serviceable condition. Restart the system to check if the error reoccurs. Use the troubleshooting procedures to find the root cause of the problem. Use Service Diagnostics to check the system and optional components. Use the Wiring Diagrams and Plug/Jack Locator to locate test points. Take voltage readings as instructed in the troubleshooting procedure. Use the Parts List to locate a part number. Use the Repair procedures to replace the part. Test the printer to verify the problem is corrected and no new problems arose.
Accessing Engine Fault History
Listed below are three ways in which you can access fault history records. 1. 2. Print (if possible) the Status page from the Troubleshooting menu --> Service Tools. The Engine Error History and Jam History are listed on the second page of the report. View the system's fault history on the Control Panel. Go to Troubleshooting->Service Tools --> Engine Error History. NOTE: Definitions of the codes that appear in the Fault and Jam History appear in Section 2. 3. If the system is connected to a network and has a TCP/IP address, view the system's web page using a web browser. a. b. c. Open a web browser. Enter the system's IP address as the URL. Select the Support --> Troubleshooting --> Diagnostics Logs and the fault history displays.
Technician's Tool Kit
Table 1 lists required, recommended, and optional tools used to service this and other similar products. Table 1 Service Tools Description Required Tools Torx Driver Bits Phillips Drivers Flathead Drivers Torque Screw Driver Hex Bit Driver Extension Small Channel lock Pliers Needle Nose Pliers Wire Cutters Flashlight Assorted Nut Drivers Lint-Free Cloths Lubricant/Grease Cleaners ESD Strap Highly Recommended Tools Nut Driver Network Cross-over cable Scanner Calibration page Toner Vac Multimeter 5.5mm (magnetic) P/N 600T2123 Tech P/N 109K01910 Toner and general cleaning Volts, Ohms, Current Reolube P/N 070E00890 Multipurpose surface cleaner and Alcohol T5, T8, T10, T15, T20 Phillips # 2 and # 1 5.0 x 75 mm, 3.0 x 75 mm, 6.0 x 100 mm 5.0 x 75 mm, 3.0 x 75 mm Required for this system P/N 003082700 2.5mm Hex Bit, T-20 P/N 003086600 Detail
Inspect and clean the system.
Find the cause of the problem.
Correct the problem.
Final checkout
Initial Issue Phaser 8510/8560MFP Multifunction Product
10/2006 1-3
Service Call Procedures
Service Call Procedures
Table 1 Service Tools Description Optional Tools Canned Air 3 -Prong Claw Part-Retriever Pointer with Magnetized Head Tweezers Utility Knife Dental Mirror Screw Box Soldering Iron Heat Shrink tubing Electrical Tape Jeweler's Screwdriver Kit Precision/Hobby tool set Serial & Parallel Loop Back Plugs Bootable CDs and Floppy Disks IC Chip Puller phillips, flathead, pliers, small torx drivers Detail
Initial Actions
Purpose
Use the following procedure to determine the reason for the service call and to identify and organize the actions which must be performed.
Procedure
1. Gather the information about the service call and the condition of the copier/printer. a. Question the operator(s). Ask about the location of most recent paper jams. Ask about the image quality and the copier/printer performance in general, including any unusual sounds or other indications. After informing the customer that the machine will not be available for copying and printing, disconnect the machine from the customer's network. If a new installation, be sure all packing material is removed. Check that the power cords are in good condition, directly plugged in to the power source, and free from defects. Repair or replace the power cords as required. Check that the circuit breaker, if present, is not tripped. If the system appears is inoperative, go to Electrical Troubleshooting and repair the problem. Then continue below. Inspect any rejected copies. Inquire as to, or otherwise determine, the paper quality and weight. Print the Paper Tips page for specific media specifications. Look for any damage to the copies, oil marks, image quality defects, or other indications of an unreported problem. NOTE: If a fault code is displayed while performing a diagnostics procedure, go to that fault code RAP and repair the fault. Return to Diagnostics and continue with the procedure that you were performing. g. Display and review the information in the Fault History, Jam History, Service Usage Profile. Classify this information into categories: Information that is related to the problem that caused the service call. Information that is related to secondary problems. Information that does not require action, such as a single occurrence of a problem. 2. 3. 4. 5. Perform any required routine maintenance activities. Refer to the Routine Maintenance Activities section. If any DADF feed jams are reported, or fault codes are logged, replace the Feed Roll Kit. Try to duplicate the problem by running the same jobs that the customer ran once repairs are complete to verify repairs are effective. Go to General Procedures to further investigate the problem.
b. c. d.
e. f.
Service Call Procedures
Service Call Procedures, Initial Actions
10/2006 1-4
Initial Issue Phaser 8510/8560MFP Multifunction Product
Routine Maintenance Activities
Procedure
1. 2. 3. 4. Clean the Pick Rollers on every call. Use the Control Panel to check maintenance item counters. Compare the counter values to those listed in Table 1. Advise the customer of any routine maintenance items that are approaching or over the service limit. Table 1 Routine Maintenance Item Life Expectancy Routine Maintenance Items Extended-Capacity Maintenance Kit Standard-Capacity Maintenance Kit Waste Tray DADF Pick Rollers and Separator Pad 30,000 cycles (0-20% coverage) 20,000 cycles (20-100%) coverage. 10,000 cycles Empty every 7 Purges 50,000 scans
Cleaning Procedures
Purpose
The purpose is to provide cleaning procedures to be performed at every call.
Procedure
CAUTION Do not use any solvents unless directed to do so in this manual. General Cleaning Use a dry lint free cloth or a lint free cloth moistened with water for all cleaning unless directed otherwise in this manual. Wipe with a dry, lint free cloth if a moistened cloth is used. 1. 2. 3. Feed Components (Rolls and Pads) Follow the General Cleaning procedure above. Jam Sensors Clean the sensors with a dry cotton swab. Scanner a. b. 4. Using the optical Cleaning Cloth, clean the Document Glass. Clean the Document Cover.
DADF Check the paper path for debris or damage. Clean the rolls with a clean cloth and Film Remover as required.
Initial Issue Phaser 8510/8560MFP Multifunction Product
10/2006 1-5
Service Call Procedures
Routine Maintenance Activities, Cleaning Proce-
Final Actions
Purpose
The intent of this procedure is to be used as a guide to follow at the end of every service call.
Procedure
1. 2. 3. 4. 5. 6. Check that the exterior of the system and the adjacent area is clean. Use a dry cloth or a cloth moistened with water to clean the exterior of the system. Do not use solvents. Check the supply of consumables. Ensure that an adequate supply of consumables is available according to local operating procedures. Conduct any operator training that is needed. Ensure the operator understands the periodic maintenance procedures in the User Guide. Reconnect the system to the customer network. Verify function by printing one or more test prints. Present these to the customer as examples of system performance. Issue copy credits as needed. Discuss the service call with the customer to ensure that the customer understands what has been done and is satisfied with the results of the service call.
Service Call Procedures
Final Actions
10/2006 1-6
Initial Issue Phaser 8510/8560MFP Multifunction Product
2 Error Messages and Codes
Power On Self Tests ....................................................................................................... NVRAM Reset ................................................................................................................. Error Message Troubleshooting...................................................................................... 1,00X.4x 525-Sheet Feeder Faults ................................................................................. 1,000.6x 525-Sheet Feeder Program Faults................................................................... 2,00X.xx I/O Board Errors ............................................................................................... 2,006.xx I/O Board Program Faults................................................................................. 2,0XX.6x Configuration Card Faults................................................................................ 3,0XX.6x IPC Program Faults ......................................................................................... 4,0xx.4x Process Control Errors ..................................................................................... 4,024.42 Wiper Alignment Fault...................................................................................... 4,025.46 Drum Transfix Fault.......................................................................................... 4,0xx.6x Process Control Program Faults....................................................................... 5,0xx.4x Y-Axis Sub-System Faults ................................................................................ 5,0xx.6x Y-Axis Sub-System Program Faults ................................................................. 6,0xx.4x X-Axis Fault ...................................................................................................... 6,0xx.6x X-Axis Program Faults...................................................................................... 7,002.44 Process Drive Fault .......................................................................................... 7,006.4x Head Tilt Solenoid Fault ................................................................................... 7,007.49 Process Drive Fault .......................................................................................... 7,008.41 Printhead Tilt Fault ........................................................................................... 7,009.42 Printhead Restraint Fault ................................................................................. 7,01X.4x Process Faults ................................................................................................. 7,0xx.6x Program Faults ................................................................................................. 8,0XX.4x Wiper or Media Drive Faults ............................................................................ 8,0xx.6x Media Drive Program Faults ............................................................................. 9,0XX.4x Ink Loader Faults............................................................................................. 9,009.44 and 9,00X.6x Ink Loader Program Faults ........................................................ 11,0XX.xx Electronics Module Interface Faults............................................................... 11,100.60 Electronics Module Temperature Fault .......................................................... 12,000.60 Program Faults............................................................................................... 13,000.48 Printhead Thermal Fault................................................................................. 13,003.42 and 13,007.46 Thermal Faults ....................................................................... 13,008.47 and 13,010.49 Drum Thermal Faults ............................................................. 13,067.43, 13,069.45, 13,071.47 Drum Temp Sensor Faults ......................................... 13,XXX.4x Preheater Thermal Faults ............................................................................. 13,1XX.4x Left Jetstack Thermal Faults ......................................................................... 13,2XX.4x Right Jetstack Thermal Faults ....................................................................... 13,XXX.xx Printhead Reservoir Thermal Faults.............................................................. 13,XXX.xx Ink Loader Thermal Faults ............................................................................ 13,00x.6x Thermal Program Faults ................................................................................. 19,0XX.4x Printhead Calibration Faults .......................................................................... 19,0XX.6x Waveform Program Faults............................................................................. 21,000.69 Diagnostic Firmware Version Mismatch......................................................... 22,0XX.6x Jam Fault....................................................................................................... 23,0XX.6x NVRAM Faults............................................................................................... 26,0XX.6x Printing Faults...................................................