Text preview for : alpine 9851r.pdf part of Alpine CDA-95851R OWNER'S MANUAL
Back to : alpine 9851r.pdf | Home
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/ PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK
EN
R
RDS MP3/WMA CD Receiver
CDA-9851R
· OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. · ISTRUZIONI PER L'USO Si prega di leggere prima di utilizzare il attrezzatura. · ANVÄNDARHANDLEDNING Innan du använder utrustningen bör du läsa igenom denna användarhandledning.
DE
FR
ES
IT
ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave., Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Phone 03-9769-0000 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 München, Germany Phone 089-32 42 640 ALPINE ELECTRONICS OF U.K. LTD. Alpine House Fletchamstead Highway, Coventry CV4 9TW, U.K. Phone 0870-33 33 763
ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989 ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano Sul Naviglio (MI), Italy Phone 02-484781 ALPINE ELECTRONICS DE ESPAÑA, S.A. Portal de Gamarra 36, Pabellón, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588 Designed by ALPINE Japan Printed in China (Y) 68-02278Z09-A
SE
Meiyi Printing Factory, Dalian, China No. 28 Chang Qing Street, Xi Gang District, Dalian, China
ENGLISH
Contents
Operating Instructions
WARNING
WARNING .................................................. 3 CAUTION ................................................... 3 PRECAUTIONS ......................................... 3 File/Folder Name Search (concerning MP3/ WMA) ........................................................... 13 Quick Search ................................................... 14 About MP3/WMA .......................................... 14
Sound Setting
Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat .......................................................... 15 Turning Loudness On/Off ............................... 15 Setting the Bass Control ................................. 16 Setting the Treble Control ............................... 16
Getting Started
Turning Power On and Off ............................... 6 Initial System Start-Up ..................................... 6 Opening and Closing the Movable Display ...... 6 Display Tilt Adjustment .................................... 6 Adjusting Volume ............................................. 6 Detaching and Attaching the Front Panel ......... 7
Other Functions
Displaying the Title/Text ................................. 16 Titling Discs/Stations ...................................... 17 Erasing Disc Title/Station Title ....................... 17
Radio
Listening to Radio ............................................. 7 Manual Storing of Station Presets .................... 8 Automatic Memory of Station Presets .............. 8 Tuning to Preset Stations .................................. 8 Station Title Search Function ............................ 8 Frequency Search Function .............................. 8
SETUP
Sound Customizing Adjusting Source Signal Levels ...................... 18 Subwoofer On and Off .................................... 18 Setting the Subwoofer System ........................ 18 Sound (Beep) Guide Function ........................ 18 Visual Customizing Dimmer Control .............................................. 18 Changing the Lighting Colour ........................ 18 Scroll Setting ................................................... 18 Scroll Type Setting .......................................... 18 Adjusting Display Contrast ............................. 18 Demonstration ................................................. 19 MP3/WMA Playing MP3/WMA Data ................................ 19 External Device Turning Mute Mode On/Off ........................... 19 Setting the AUX Mode (V-Link) ..................... 19 Connecting to an External Amplifier .............. 19 Setting the External Digital Input ................... 19 Connecting an Optical Digital Compatible Audio Processor and an Ai-NET Non-Compatible DVD Player ..................... 19
RDS
Setting RDS Reception Mode and Receiving RDS Stations ................................................. 9 Recalling Preset RDS Stations .......................... 9 Receiving RDS Regional (Local) Stations ....... 9 PI SEEK Setting ................................................ 9 Receiving Traffic Information ........................ 10 PTY (Programme Type) Tuning ..................... 10 Receiving Traffic Information While Playing CD or Radio ................................................. 10 Priority PTY (Programme Type) .................... 11 Displaying Radio Text .................................... 11
CD/MP3/WMA
Playback .......................................................... 11 Repeat Play ..................................................... 12 M.I.X. (Random Play) .................................... 13 Scanning Programmes .................................... 13 Searching from CD Text ................................... 13
1-EN
iPodTM Operation (Optional)
Playback .......................................................... 20 Searching for a desired Song .......................... 20 Searching by Playlist ................................... 20 Searching by artist name ............................. 20 Searching by album name ........................... 21 Quick Search ................................................... 21 Random Play Shuffle (M.I.X.) ....................... 21 Repeat Play ..................................................... 21 Displaying the Text ......................................... 21
Changer (Optional)
Controlling CD Changer (Optional) ............... 22 Playing MP3 Files with the CD Changer (Optional) .................................................... 22 Multi-Changer Selection (Optional) ............... 22
Information
In Case of Difficulty ....................................... 23 Specifications .................................................. 25
Installation and Connections
Warning ........................................................... 26 Caution ............................................................ 26 Precautions ...................................................... 26 Installation ...................................................... 27 Connections ...................................................... 28
2-EN
Operating Instructions
WARNING
WARNING
This symbol means important instructions. Failure to heed them can result in serious injury or death.
CAUTION
This symbol means important instructions. Failure to heed them can result in injury or material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the product.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
Temperature
Be sure the temperature inside the vehicle is between +60°C (+140°F) and 10°C (+14°F) before turning your unit on.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
Moisture Condensation
You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire, electric shock or other injury.
Maintenance
If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
3-EN
PRECAUTIONS
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off.
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc. Make sure the label side is facing up when you insert the disc. Your player will automatically eject any disc that is inserted incorrectly. If the player continues to eject a correctly inserted disc, push the RESET switch with a pointed object such as a ballpoint pen. Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.
New Discs
As a protective measure to prevent the CD from jamming, the CD player will automatically eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.
Centre Hole Centre Hole New Disc
Disc Accessories
There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.
Bumps
Outside (Bumps) Transparent Sheet Disc Stabilizer
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use any special shape discs. Use of special shape discs may cause damage to the mechanism.
Installation Location
Make sure the CDA-9851R will not be installed in a location subjected to: · · · · Direct sun and heat High humidity and water Excessive dust Excessive vibrations
4-EN
On handling Compact Discs (CD/CD-R/CD-RW)
· · · · · · Do not touch the surface. Do not expose the disc to direct sunlight. Do not affix stickers or labels. Clean the disc when it is dusty. Make sure that there are no bumps around the disc. Do not use commercially available disc accessories. Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again.
To customers using CD-R/CD-RW
· · If a CD-R/CD-RW cannot be played back, make sure the last recording session was closed (finalized). Finalize the CD-R/CD-RW if necessary, and attempt playback again.
About media that can be played.
Use only compact discs with the label side showing the CD logo marks below.
If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordable)/CD-RWs (CDReWritable) which have been recorded only on audio devices. You can also play CD-Rs/CD-RWs containing MP3/WMA formatted audio files. · Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed or a re-recording was attempted, copyprotected CDs which do not conform to the audio CD industry standard. Use discs with MP3/WMA files written in a format compatible with this unit. For details, see page 14-15. ROM data other than audio files contained in a disc will not produce sound when played back.
· ·
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and /or other countries. Apple, the Apple logo and iPod are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
5-EN
Getting Started
SOURCE/ POWER RESET Rotary encoder
Opening and Closing the Movable Display
Press c.
The movable display will open.
To close the movable display, press c again.
The movable display will close. · Do not apply shock to the movable display when it is open as it may result in malfunction of the unit. · The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses. · The display will stop at the set tilt angle when closing.
Caution Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.
g MENU f
c
Connectable to Steering Remote Control Interface Box You can operate this unit from the vehicle's control unit when an Alpine Steering Remote Control Interface Box (optional) is connected. For details, contact your Alpine dealer.
Turning Power On and Off
Press SOURCE/POWER to turn on the unit.
· The unit can be turned on by pressing any other button except eject c.
Display Tilt Adjustment
The movable display may be adjusted to 3 different tilt angles depending upon user preference.
Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit.
· The first time power is turned on, the volume will start from level 12.
1 2
Press MENU to select the TILT mode. Turn the Rotary encoder to adjust the tilt angle of the movable display.
Movable display
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time, after installing the CD changer, after changing the car battery, etc.
1 2
Turn off the unit power. Press RESET with a ball-point pen or similar pointed object.
3
Press and hold MENU for at least 2 seconds to return to normal mode, or press MENU and select RETURN to return to normal mode.
· The display will close a half minute after the ignition key is turned to the OFF position. · The adjusted tilt angle of the display is stored in memory. There is no need to re-adjust the tilt angle when the power is turned back on.
Caution Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.
Adjusting Volume
Turn the Rotary encoder until the desired sound is obtained.
6-EN
Detaching and Attaching the Front Panel
Detaching
Radio
SOURCE/ POWER TUNE/ A.ME BAND
1 2 3
Turn off the unit power. Press (Release) at the upper left side until the front panel pops out. Grasp the left side of the front panel and pull it out.
· The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction. · To protect the front panel, place it in the supplied carrying case.
g f
Rotary encoder
F Preset buttons (1 through 6)
Attaching
Listening to Radio
1 2
Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. Push the left side of the front panel until it locks firmly into the main unit. 2 1
1 2 3
Press SOURCE/POWER until a radio frequency appears in the display. Press BAND repeatedly until the desired radio band is displayed.
FM1 FM2 FM3 MW LW FM1
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK
· The initial mode is Distance mode. · Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. · Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.
Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning).
4
Press g or f to tune in the desired station.
Holding down g or f will change the frequency continuously.
· The ST indicator appears on the display when a stereo FM station is tuned in.
7-EN
Manual Storing of Station Presets
Station Title Search Function
If the title of a radio station is entered, you can search for that radio station by its title while listening to the currently received radio station.
1 2
Select the radio band and tune in a desired radio station you wish to store in the preset memory. Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station.
The selected station is stored. The display shows the band, preset no. and station frequency memorized.
1 2 3
Press mode.
in Radio mode to switch to Title Search
The first title input blinks in the display.
Select the desired title by turning the Rotary encoder within 10 seconds. Press the Rotary encoder to receive the frequency of the selected title.
· A total of 30 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, FM3, MW and LW). · If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. · If the "FUNC" indicator is illuminated, turn off the indicator by pressing F, then you can perform the operation.
Automatic Memory of Station Presets
· Search mode in Title Search mode is cancelled by pressing and holding for at least 2 seconds. · If a station has no title, "NO TITLE" is displayed for 2 seconds. · Any radio station can be searched by the Station Title Search function. The station titles are displayed in the order they were input.
1 2
Press BAND repeatedly until the desired radio band is displayed. Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location no. 1.
Frequency Search Function
You can search for a radio station by its frequency.
1 2 3
Press and hold for at least 2 seconds in Radio mode to activate Frequency Search mode. Turn the Rotary encoder within 10 seconds to select the desired frequency. Press the Rotary encoder to receive the selected frequency.
· If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.
· Search mode in Frequency Search mode is cancelled by pressing and holding for at least 2 seconds.
Tuning to Preset Stations
1 2
Press BAND repeatedly until the desired band is displayed. Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory.
The display shows the band, preset number and frequency of the station selected.
· If the "FUNC" indicator is illuminated, turn off the indicator by pressing F, then you can perform the operation.
8-EN
RDS
g TA TITLE
4
Make sure that the "FUNC" indicator light goes out, then press the preset button in which your desired RDS station is preset.
If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list.
5
If the preset station and the stations in the AF list cannot be received:
When the PI SEEK setting is on (refer to "PI SEEK Setting" on this page), the unit searches again for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset no. disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset button to tune in a Regional station in other district.
MENU
f Rotary encoder
F
1/AF 2/P.PTY 3/PTY
Setting RDS Reception Mode and Receiving RDS Stations
The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme.
· For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the FM1, FM2 and FM3 bands only.
Receiving RDS Regional (Local) Stations
1 2 3 4
Press MENU to select the SETUP mode.
SETUP mode is activated.
1 2 3 4 5
Press F so that the "FUNC" indicator lights up. Press 1/AF to activate the RDS mode. Press g or f to tune in the desired RDS station. Press 1/AF again to deactivate the RDS mode. Press F to activate the normal mode. The "FUNC" indicator goes out.
Press g or f to select the "REG" mode. Turn the Rotary encoder to select ON or OFF.
In the OFF mode, the unit automatically keeps receiving the related local RDS station.
Press and hold MENU for at least 2 seconds to return to normal mode, or press MENU and select RETURN to return to normal mode.
PI SEEK Setting
· When the unit receives the PTY31 (Emergency Broadcast) signal, the unit will show "ALARM" in the display automatically. The RDS digital data includes the following: PI Programme Identification PS Programme Service Name AF List of Alternative Frequencies TP Traffic Programme TA Traffic Announcement PTY Programme Type EON Enhanced Other Networks
1 2 3 4
Press MENU to select the SETUP mode.
SETUP mode is activated.
Press g or f to select "PISK". Turn the Rotary encoder to select ON or OFF. Press and hold MENU for at least 2 seconds to return to normal mode, or press MENU and select RETURN to return to normal mode.
Recalling Preset RDS Stations
1 2 3
Press F so that the "FUNC" indicator lights up. Press 1/AF to activate the RDS mode. Press F to activate the normal mode. The "FUNC" indicator goes out.
9-EN
Receiving Traffic Information
4
1 2
Press TA so that the "TA" indicator lights up. Press g or f to select your desired traffic information station.
When a traffic information station is tuned in, the "TP" indicator lights up. Traffic information is heard only when it is being broadcast. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows "TRF-INFO" for a few seconds and returns to the PS display. When the traffic information broadcast is over, the unit will automatically set in the standby mode.
Press 3/PTY within 10 seconds after selecting the programme type to start searching for a station in the selected programme type.
The chosen programme type display blinks during searching and lights when a station is found. If no PTY station is found, "NO PTY" will be displayed for 10 seconds.
5
Press F to activate the normal mode. The "FUNC" indicator goes out.
· Operate the unit while the "FUNC" indicator lights up. If no operation is performed within 10 seconds, the "FUNC" indicator goes out.
· If the traffic information broadcast signal falls below a certain level, the unit remains in the receiving mode for 1 minute. If the signal remains below a certain level for over 1 minute, the "TA" indicator blinks. · If you do not want to listen to the traffic information being received, lightly press TA to skip that traffic information message. The TA mode will remain in the ON position to receive the next traffic information message. · If the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized. · In the TA mode, the SEEK tuning selects only the TP stations.
Receiving Traffic Information While Playing CD or Radio
1 2
Press TA so that the "TA" indicator lights up. Press g and f to select a traffic information station if necessary.
When a traffic information broadcast starts, the unit automatically mutes the CD player/changer or the regular FM broadcast. When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began.
PTY (Programme Type) Tuning
When traffic information stations cannot be received:
In the tuner mode: When the TP signal can no longer be received for over 1 minute, the "TA" indicator blinks. In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. · The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternate frequencies to the AF list. The "EON" indicator lights up while an RDS EON station is being received. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs.
1 2
Press F so that the "FUNC" indicator lights up. Press 3/PTY to activate the PTY mode, while the unit is in Radio (FM receiving) mode.
The Programme Type of the station being currently received will be displayed for 10 seconds. If there is no receivable PTY broadcast, "NO PTY" will be displayed for 10 seconds. If no RDS station can be received, the display shows "NO PTY."
· If no operation is performed within 10 seconds after pressing 3/PTY, the PTY mode will be automatically cancelled.
3
Press g and f within 10 seconds after activating the PTY mode to choose the desired programme type while the PTY (programme type) is being displayed.
Each press scrolls the programme type by one. LIGHT M CLASSICS OTHER M
3
Press TA to deactivate the Traffic Information mode.
The "TA" indicator goes out.
10-EN
Priority PTY (Programme Type)
This function allows presetting of a programme type such as music category, news, etc. You can listen to a programme in the preset programme type as the unit automatically gives priority to the preset programme type when it begins broadcasting, and interrupts the programme you are currently listening. This feature is functional when your unit is set to a mode other than the LW and MW.
CD/MP3/WMA
SOURCE/ POWER -/J f TITLE 8 9
1 2
Press F so that the "FUNC" indicator lights up. Press 2/P.PTY to activate the PRIORITY PTY mode.
The initial setting is "NEWS."
g Rotary encoder F 4( ) 5( ) 6( ) c
· If no operation is performed within 10 seconds after pressing 2/P.PTY, the PRIORITY PTY mode is automatically cancelled.
3 4
Press g or f within 10 seconds while "NEWS" is being displayed to choose a desired programme type. Then press 2/P.PTY.
The PRIORITY PTY function will activate.
Playback
1 2
Press c.
The movable display will open.
Press 2/P.PTY to activate the PRIORITY PTY mode again.
To change the programme category, perform the step 3. To disable the PRIORITY PTY function, press F so that the "FUNC" indicator lights up, then press and hold 2/P. PTY for at least 2 seconds.
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
· In the PRIORITY PTY function, unlike in the TA function, the volume does not increase during operation.
5
Press F to activate the normal mode. The "FUNC" indicator goes out.
· Operate the unit while the"FUNC" indicator lights up. If no buttons are pressed within 10 seconds, the "FUNC" indicator goes out.
The movable display will close and playback will begin. When a disc is already inserted, press SOURCE/POWER to switch to the CD mode. The mode will change every time the button is pressed.
Displaying Radio Text
Text messages from a radio station can be displayed.
TUNER CD CD CHANGER* TUNER
* Only when the CD changer is connected
Press TITLE while receiving FM in the radio mode to select the Radio Text display.
The display will change every time the button is pressed.
PS (Programme Service Name) Radio Text STATION TITLE FREQUENCY PS (Programme Service Name)
3 4
While playing back MP3/WMA, press 8 or 9 to select desired folder.
Holding down 8 or 9 will change folders continuously.
Press g or f to select the desired track (file).
Returning to the beginning of the current track (file): Press g. Fast backward : Press and hold g. Advancing to the beginning of the next track (file) : Press f. Fast forward : Press and hold f.
The display shows "WAITING" for a few seconds, then starts scrolling the text message. · If there is no receivable text message or the unit cannot receive a text message properly, the display shows "NO TEXT."
5
To pause playback, press -/J.
Pressing -/J again will resume playback.
Continued
11-EN
6
To eject the disc, press c.
Repeat Play
Press 4( played.
Press 4(
· Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either. · If the CD does not eject, press and hold c for at least 2 seconds with the movable display open. · The CD-player can play discs containing audio data, MP3 data and WMA data. · A WMA format file that is protected by DRM (Digital Rights Management) cannot be played back on this unit. · "MP3" is displayed during MP3 playback. · "WMA" is displayed during WMA playback. · The track display for MP3/WMA data playback is the file numbers recorded on the disc. · If the HDA-5460 model is connected to the unit, some operations (for example changing the source, selecting the file by holding buttons up or down, etc.), can be carried out on this unit.
) to play back repeatedly the track being
The track (file) will be played repeatedly. ) again and select OFF to deactivate repeat play.
CD mode : RPT RPT (off) : Only a track is repeatedly played back
*1 : A disc is repeatedly played back
MP3/WMA Play Display
The folder number, file number, sampling rate, and bit rate will be displayed as described below.
File number display
*1 When a CD changer is connected · If REPEAT is set to ON during M.I.X. play in CD changer mode, M.I.X. will apply to the current disc only.
MP3/WMA mode : RPT RPT RPT (off) : Only a file is repeatedly played back : Only files in a folder are repeatedly played back
*2 : A disc is repeatedly played back
01
Folder number display
03 44.1
kHz
Sampling rate display
The sampling rate and the bit rate (frame display*) are alternately displayed.
*2 When an MP3 compatible CD changer is connected
File number display
01
Folder number display
03 160
kbps
· If a 6-disc CD changer or an MP3 compatible CD changer is connected: In CD changer mode, press F to illuminate the "FUNC" indicator, and go to the step above within 10 seconds. · If a 12-disc CD changer is connected: In CD changer mode, press F twice to illuminate the "FUNC" indicator, and go to the step above within 10 seconds.
Bit rate display
· Press TITLE to switch the display. Please see "Displaying the Title/Text" (page 16) for information about display switching. * The recording sampling rate and bit rate of the MP3/WMA file are displayed. A WMA file of variable bit rate displays the average bit rate.
12-EN
M.I.X. (Random Play)
Press 5( ) in the play or pause mode.
The tracks (files) on the disc will be played back in random sequence. To cancel M.I.X. play, press 5( ) again.
Scanning Programmes
Press 6( ) to activate the Scan mode.
The first 10 seconds of each track (file) will be played back in succession. To stop scanning, press 6( mode. ) and deactivate the Scan
CD mode : M.I.X.
:Track are played back in random sequence.
(off)
M.I.X.*3: The tracks on all the CDs in the current magazine will be included in the random playback sequence.
· If a 6-disc CD changer or an MP3 compatible CD changer is connected: In CD changer mode, press F to illuminate the "FUNC" indicator, and go to the step above within 10 seconds. · If a 12-disc CD changer is connected: In CD changer mode, press F twice to illuminate the "FUNC" indicator, and go to the step above within 10 seconds.
Searching from CD Text
Tracks can be searched and played using the CD text on the disk. In the case of discs and changers that do not support text, searches can be made using the track numbers.
*3 When a CD changer equipped with the All M.I.X. function is connected · If M.I.X. is set to ON during RPT (REPEAT ALL) play in CD changer mode, M.I.X. will apply to the current disc only.
1 2
Press
during play.
This will set the search mode.
MP3/WMA mode : M.I.X.: Only files in a folder are played back in random sequence. M.I.X.: Files are played back in random sequence. If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc.
Turn the Rotary encoder to select the desired track, then press the Rotary encoder.
This will play the selected track.
for at least 2 seconds in the search mode to · Press and hold cancel. Or, the search mode will be cancelled when an operation has not been performed in 10 seconds. · CD text search cannot be made during M.I.X. play.
(off)
File/Folder Name Search (concerning MP3/ WMA)
You can display and search for the folder and file name while listening to the file currently being played back.
· If a 6-disc CD changer or an MP3 compatible CD changer is connected: In CD changer mode, press F to illuminate the "FUNC" indicator, and go to the step above within 10 seconds. · If a 12-disc CD changer is connected: In CD changer mode, press F twice to illuminate the "FUNC" indicator, and go to the step above within 10 seconds.
1 2 3
Press to select Folder Name Search mode or File Name Search mode in MP3/WMA mode.
Folder Name Search mode
Turn the Rotary encoder within 10 seconds to select the desired folder. Press the Rotary encoder to play back the first file in the selected folder.
· Search mode is cancelled by pressing and holding for at least 2 seconds in Folder Name Search mode. · While in Folder Name Search mode, press to switch to File Name Search mode. · "NO FILE" is displayed if the folder that is selected by the Folder Name Search mode contains no files. · "ROOT" is displayed for a folder that does not have a folder name. · Folder Name search cannot be made during M.I.X. play.
Continued
13-EN
File Name Search mode
Method for creating MP3/WMA files
Audio data is compressed by using MP3/WMA specified software. For details on creating MP3/WMA files, refer to the user's manual for that software. MP3/WMA files that can be played back by this device have the file extension "mp3" / "wma". Files with no extension cannot be played back. (WMA ver. 7.1, 8 and 9 are supported)
2 3 4
Press 8 or 9 to select another Folder. Select the desired file by turning the Rotary encoder within 10 seconds. Press the Rotary encoder to play back the selected file.
Supported playback sampling rates and bit rates
MP3 Sampling rates : 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 8 - 320 kbps Variable Bit rates: 8 - 320 kbps WMA Sampling rates : 48 kHz, 44.1 kHz, 32 kHz Bit rates: 48 - 192 kbps Variable Bit rates: 48 - 320 kbps Note that for sampling rates, this device's frame display (Page 12) may not display correctly. This device may not play back correctly depending on sampling rates.
· File Name Search mode is cancelled by pressing and holding for at least 2 seconds. · While in File Name Search mode, press to switch to Folder Name Search mode. · File Name Search cannot be made during M.I.X. play.
Quick Search
You can search for tracks (files).
1 2
Press and hold for at least 2 seconds in the CD/ Changer/MP3/WMA mode to activate Quick Search mode. Turn the Rotary encoder within 10 seconds to select a desired track (file).
The selected track is played back immediately. for at least 2
ID3 tags/WMA tags
This device supports ID3 tag v1 and v2, and WMA tag. If tag data is in an MP3/WMA file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data. This device can only display single-byte alphanumeric characters (up to 30 for ID3 tags and up to 15 for WMA tags) and the underscore. For non-supported characters, "NO SUPPORT" is displayed. The tag information may not be correctly displayed, depending on the contents.
· Search mode is cancelled by pressing and holding seconds in Quick Search mode.
About MP3/WMA
CAUTION Except for private use, duplicating audio data (including MP3/ WMA data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty. What is MP3?
MP3, whose official name is "MPEG-1 Audio Layer 3," is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG which is a joint activity institution of the IEC. MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds.
Producing MP3/WMA discs
MP3/WMA files are prepared, then written to a CD-R or CDRW using CD-R writing software. A disc can hold up to 510 files/folders (including Root Folders). However, the maximum number of folders is 255.
Media supported
The media that this device can play back are CD-ROMs, CDRs, and CD-RWs.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or Level 2. Under the ISO9660 standard, there are some restrictions to remember. The maximum nested folder depth is 8 (including the root directory). The number of characters for a folder/file name is limited. Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and `_' (underscore). This device also can play back discs in Joliet, Romeo, etc., and other standards that conform to ISO9660. However, sometimes the file names, folder names, etc., are not displayed correctly.
What is WMA?
WMA, or "Windows MediaTM Audio," is compressed audio data. WMA allows you to create music files and store them at higher ratios of compression than MP3 audio data (approx. half original size). This is achieved while still maintaining CD quality sound.
Formats supported
This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD (CD-Extra) and Multi-Session. This device cannot correctly play back discs recorded with Track At Once or packet writing.
14-EN
Order of files
The unit plays the files in the order that the writing software writes them. Therefore, the playing order may not be the same as the order you input. The playback order of the folders and files is as follows. However, the folder and file playback order differs from the folder no. and file no. indicated on the display.
Sound Setting
BAND Rotary encoder (MODE)
1
Root Folder
2
2
3 4
4 3
g MENU f
5
5
6
7 1
6
Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat
1
Press Rotary encoder (MODE) repeatedly to choose the desired mode.
Each press changes the modes as follows:
BASS TREBLE SUBW* BALANCE FADER DEFEAT VOLUME BASS
Folder
MP3/WMA File
Terminology
Bit rate This is the "sound" compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files. Sampling rate This value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so the sound is sampled (recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data. Encoding Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format. Tag Song information such as track titles, artist names, album names, etc., written into MP3/WMA files. MP3: ID3 tag WMA: WMA tag Root folder The root folder is found at the top of the file system. The root folder contains all folders and files.
Bass : 7 ~ +10 Treble : 7 ~ +7 Subwoofer : 0 ~ +15 Balance : L15 ~ R15 Fader : R15 ~ F15 Defeat : OFF/ON Volume : 0 ~ 35
· If the Rotary encoder (MODE) is not pressed within 5 seconds after selecting the BASS, TREBLE, BALANCE, FADER, DEFEAT or SUBWOOFER mode, the unit automatically returns to normal mode. * When the subwoofer mode is set to OFF, its level cannot be adjusted.
2
Turn the Rotary encoder until the desired sound is obtained in each mode.
By setting Defeat ON, previously adjusted settings of BASS and TREBLE will return to the factory defaults.
· Depending on the connected devices, some functions and display indications do not work.
Turning Loudness On/Off
Loudness introduces a special low- and high-frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound.
Press and hold the Rotary encoder (MODE) for at least 2 seconds to activate or deactivate the loudness mode.
The display shows "LOUD ON" when the loudness mode is activated.
15-EN
Setting the Bass Control
You can change the bass frequency emphasis to create your own tonal preference.
Other Functions
-/J BAND TITLE
1 Press MENU to select BASS. 2-1 Setting the bass centre frequency:
60Hz 80Hz 100Hz 120Hz 60Hz
Press g or f to select the desired bass centre frequency.
The displayed bass frequency is emphasized.
2-2
Setting the bass band width (Q-Factor): Press BAND to select the desired bass band width.
1 2 3 4 (Narrow) ..................................................... (Wide) g f Rotary encoder
Changes the boosted bass band width to wide or narrow. A wide setting will boost a wide range of frequencies above and below the centre frequency. A narrower setting will boost only frequencies near the centre frequency.
Displaying the Title/Text
It is possible to display the CD/Station title if the title has been previously inputted ("Titling Discs/Stations" page 17). Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file name, and the tag, etc., while playing MP3/WMA files.
2-3 3
Setting the bass level: Turn the Rotary encoder to select the desired bass level (7~+10).
You can emphasize or weaken the bass level.
Press and hold MENU for at least 2 seconds to return to normal mode.
Press TITLE.
The display will change every time the button is pressed.
The display in Radio mode:
PS (Programme Service Name) Radio Text STATION TITLE FREQUENCY PS (Programme Service Name)
· If no operation is performed in 60 seconds, the unit returns to normal mode. · The bass level settings will be individually memorized for each source until the setting is changed. The bass frequency and bass band width settings adjusted for one source are effective for all other sources. · Depending on the connected devices, some functions and display indications do not work. However, bass level is still adjustable if an audio processor with the bass adjustment is connected. · This function is inoperable when DEFEAT is set to ON.
The display in CD mode:
TRACK NO./ELAPSED TIME TEXT (DISC NAME)*1 TEXT (TRACK NAME)*1 TITLE TRACK NO./ELAPSED TIME
The display in MP3/WMA mode:
FILE NO./ELAPSED TIME FOLDER NO./FILE NO. FOLDER NAME*3 FILE NAME ARTIST NAME*2 ALBUM NAME*2 TRACK NAME*2 FILE NO./ELAPSED TIME
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal preference.
1 Press MENU to select TREBLE. 2-1 Setting the treble Centre frequency:
Press g or f to select the desired treble centre frequency.
7.5kHz 10.0kHz 12.5kHz 15.0kHz 7.5kHz
The displayed Treble frequency is emphasized.
2-2 3
Setting the treble level: Turn the Rotary encoder to select the desired treble level (7~+7).
You can emphasize the treble level.
*1 Displayed during playback of a disc with CD Text. "NO TEXT" will be displayed when the CD contains no Text data. *2 ID3 tag/WMA tag If an MP3/WMA file contains ID3 tag/WMA tag information, the ID3 tag/WMA tag information is displayed (e.g., track name, artist name, and album name). All other tag data is ignored. "NO DATA" will be displayed when an MP3/WMA file contains no ID3 tag/WMA tag information. *3 "ROOT" is displayed for a folder that does not have a folder name.
Press and hold MENU for at least 2 seconds to return to normal mode.
· If no operation is performed in 60 seconds, the unit returns to normal mode. · The treble level settings will be individually memorized for each source until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources. · Depending on the connected devices, some functions and display indications do not work. However, treble level is still adjustable if an audio processor with the treble adjustment is connected. · This function is inoperable when DEFEAT is set to ON.
16-EN
About the indicator display When displaying Title/Text, the following indicators are lit according to the mode.
Bass Level setting is displayed. ("H" is displayed when Bass level is set to 10, and nothing is displayed when Bass level is set below zero). Bass Level is displayed.
Titling Discs/Stations
It is possible to title your favourite CD's or radio stations. You cannot input titles for MP3/WMA discs.
1 2 3 4
Press TITLE and select the Title Display.
For details, see "Displaying the Title/Text" (page 16).
Press and hold TITLE for at least 2 seconds. The first character will blink. Press BAND to select the characters/symbols.
Upper case Lower case Numeral/Symbol Upper case
Lights up if the selection is available after pressing g or f. Indicator/ Mode CD Mode While displaying Title -- MP3/WMA Mode -- TUNER Mode -- --
Turn the Rotary encoder to select the desired letter/numeral/symbol available for naming. Press Rotary encoder to store the first character.
The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title.
5
While displaying Folder Name While displaying File -- Name While displaying -- Artist Name While While displaying Text displaying (Disc Name) Album Name While While displaying Text displaying (Track Name) Track Name
6
Repeat steps 3 and 5 above to complete the titling.
Pressing the Rotary encoder after entering the 8th character automatically stores the title into memory. When entering a title of less than 8 characters (for example, 3 character title): After entering 3 characters, the 4th character space will be blinking. Go to step 7 to complete the title.
--
--
-- While displaying Title
Tag information
7
Press TITLE to record the title.
About "Title" and "Text"
Title: With this device, it is possible to input the CD/Station name (this page). This inputted name is referred to as a "title." You cannot input or display titles on MP3/WMA discs. Text: Text compatible CDs contain text information such as the disc name and track name. Such text information is referred to as "text."
· If you cancel while entering a title, selected characters are not written. · You can enter 24 radio station titles and 18 CD titles on this unit. If you try to store beyond the limit, the display will show "FULL DATA." At this point, no more titles can be stored. To input a new title, one of the previously inputted titles must first be deleted. · The CD Changer title length or memory capacity varies depending upon the model being used. · When you want to erase a title, enter the " " symbol into all spaces. · The operations described in steps 3 to 5 must be made within 10 seconds. The input mode will be cancelled if no action is taken for over 10 seconds.
Erasing Disc Title/Station Title
· Some characters may not be displayed correctly with this device, depending on the character type. · The CD changer must also be CD Text compatible for the Text information to be displayed. · When the Scroll Setting (page 18) is set to "SCR MANUAL," press and hold TITLE for at least 2 seconds to scroll the Text information only once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE NAME DISPLAY or TAG DISPLAY mode). · "NO SUPPORT" is displayed when the desired text information cannot be displayed on this unit. · If the title was not previously input, "NO TITLE" is displayed. · The text or tag information may not be correctly displayed, depending on the contents.
1 2 3 4 5
Press TITLE to select the Title Display. Then, press again and hold for at least 2 seconds. Press and hold -/J for at least 2 seconds.
The title in the display will blink.
Press g or f repeatedly until the title you want to erase is displayed. Press and hold -/J for at least 2 seconds to erase the title displayed. Press TITLE to cancel the title erasing mode.
· You cannot erase CD-TEXT. · "NO DATA" is displayed for 2 seconds if the title is not input in step 2, or if the title is erased in step 4.
17-EN
SETUP
You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, choose from Sound Customizing, Visual Customizing, etc., to make your desired settings.
SOURCE/ POWER BAND Rotary encoder
Setting the Subwoofer System
SUBW SYS1 (Initial setting) / SUBW SYS2
Select either SYS1 or SYS2 for the desired subwoofer effect.
SYS1: Subwoofer level changes according the main volume setting. SYS2: Subwoofer level change is different from the main volume setting. For example, even at low volume settings, the subwoofer is still audible.
Sound (Beep) Guide Function
BEEP ON (Initial setting) / BEEP OFF
This function will give audible feedback with varying tones depending upon the button pressed.
Visual Customizing
Dimmer Control
DIMM AUTO (Initial setting) / DIMM MANUAL
g MENU f
Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's backlighting is too bright at night.
A typical SETUP procedure is shown in steps 1 to 4 as follows. See below for further information about each SETUP menu.
Changing the Lighting Colour
AMBER ON / AMBER OFF (Green) (Initial setting)
You can change the lighting colour of the unit.
1 2
Press MENU to select the SETUP mode.
SETUP mode is activated.
Scroll Setting
SCR AUTO / SCR MANUAL (Initial setting)
Press g or f to select the desired SETUP menu.
(e.g. Select BEEP)
FM-LV REG*1 PISK*1 AMBER DIMM SUBW (SUBW SYS)*2 PLAY BEEP SCR TYPE SCR MUTE AUX IN (AUX NAME)*3 D-AUX P-IC CONT AP DEMO FM-LV
This CD player can scroll the disc and track names recorded on CDTEXT discs, as well as the text information of MP3/WMA files, folder names, and tags.
: The CD text information, the text information of folder and file names, and the tags are scrolled automatically. MANUAL : The display is scrolled only when a disc is loaded or when a track is changed, etc. AUTO
*1 Refer to the "RDS" section (page 9) *2 Displayed only when SUBW is ON. *3 Displayed only when AUX is ON.
· The unit scrolls CD text names, folder names, file names or tag display. The disc titles input manually (page 17) cannot be scrolled.
3 4
Turn the Rotary encoder to change the setting.
(e.g. Select BEEP ON or BEEP OFF.)
Scroll Type Setting
SCR TYPE1 (Initial setting) / SCR TYPE2
Choose from two scrolling methods. Select the the type you prefer. TYPE1 TYPE2 : The characters scroll sequentially, appearing from the right side of the display. : The characters are displayed one by one, and disappear one by one from the left side of the display after the screen is filled up with the characters.
Press and hold MENU for at least 2 seconds to return to normal mode, or press MENU and select RETURN to return to normal mode.
· If no operation is performed in 60 seconds, the unit returns to normal mode.
Sound Customizing
Adjusting Source Signal Levels
FM-LV HIGH (Initial setting) / FM-LV LOW CONT
Adjusting Display Contrast
You can adjust the display contrast for better visibility. You can adjust in a range of - 5 and + 5. · The initial setting at the factory is "0."
If the difference in volume level between the CD player and FM radio is too great, adjust the FM signal level.
Subwoofer On and Off
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the subwoofer output level. 1 Press the Rotary encoder repeatedly to select the SUBW mode.
BASS TREBLE SUBW BALANCE FADER DEFEAT VOLUME BASS
2 Adjust the level by turning the Rotary encoder.
18-EN
Demonstration
DEMO ON / DEMO OFF (Initial setting)
P-IC ON : The speakers are driven by the built-in amplifier.
Speakers
SPEAKER RIGHT FRONT
This unit has a demonstration feature for the display and sound. · To quit Demo mode, set to DEMO OFF.
Front right
MP3/WMA
Playing MP3/WMA Data
PLAY CD-DA (Initial setting) / PLAY CD-DA&MP3
SPEAKER RIGHT REAR
Rear right
This product can playback CDs containing both CD and MP3/WMA data. However, in some situations (some enhanced CDs), playback may be difficult. For these special cases, you can select playback of CD data only. When a disc contains both CD or the MP3/WMA data, playback starts from the CD data portion of the disc.
CD-DA : Only CD data can be played back. CD-DA&MP3 : Both CD data and MP3/WMA file tracks can be played back.
SPEAKER LEFT REAR
Rear left
SPEAKER LEFT FRONT
Front left
· Perform this setting before inserting a disc. If a disc has already been inserted, perform the setting after you remove the disc. (If you use an MP3 changer, you have to change discs.)
· No sound is produced by the system when the power output is set to OFF.
External Device
Turning Mute Mode On/Off
MUTE ON (Initial setting) / MUTE OFF
Setting the External Digital Input
D-AUX ON / D-AUX OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device.
When an ALPINE Ai-NET compatible digital audio processor and a DVD player (DVE-5207) not compatible with Ai-NET are connected, set D-AUX to ON to enjoy 5.1-channel surround sound. · After setting D-AUX to ON, make the setting in "Connecting an Optical Digital Compatible Audio Processor and an Ai-NET NonCompatible DVD Player." · Press SOURCE/POWER, and select the D-AUX mode, and adjust the volume, etc. · Depending on the connected audio processor, DVD player sound may continue to be output, even though the source is changed to another one. If this occurs, set the DVD player's power to OFF.
Setting the AUX Mode (V-Link)
AUX IN ON / AUX IN OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/ RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA410C) to this component. You can change the AUX name display when AUX IN ON is set. Select the AUX name by pressing g or f. Then turn the Rotary encoder. If the KCA-410C is connected, it is possible to select two AUX names. · Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE/POWER to select AUX mode and then press BAND to select your desired device.
Connecting an Optical Digital Compatible Audio Processor and an Ai-NET Non-Compatible DVD Player
AP H510 /AP OTHER (Initial setting)
After setting D-AUX to ON in "Setting the External Digital Input," do the following according to the audio processor type:
H510 : If a PXA-H510 and a DVD player (DVE-5207) not compatible with Ai-NET are connected (using an optical cable), use the H510 setting. Connect the DVD player to the optical digital input (DVD Player) terminal of the processor.
Connecting to an External Amplifier
P-IC ON (Initial setting) / P-IC OFF
When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier.
P-IC OFF : Use this mode when the front and rear preamplifier of the unit are used to drive an external amplifier connected to the speakers. In this setting, the head unit's internal amplifier has no output to drive speakers. Front left Front right Rear left Rear right
OTHER : If an audio processor other than a PXA-H510 and a DVD player (DVE-5207) not compatible with Ai-NET are connected (using an optical cable), use the OTHER setting. Connect the DVD player to the optical digital input (Head unit) terminal of the processor.
· After input selection is completed, turn the ignition off and back on again. Setting of the optical digital input switch is completed.
Amplifier
Amplifier
19-EN
iPod TM Operation (Optional)
SOURCE/ POWER -/J BAND TITLE Rotary encoder
Searching by Playlist
1
Press
to select a PLAYLIST search mode.
Each press changes the search mode. The search mode will automatically be changed to the PLAYLIST search mode 4 seconds after PLAYLIST has been selected.
PLAYLIST ARTIST ALBUM PLAYLIST
2*1 Turn the Rotary encoder within 10 seconds, and
select a playlist.
3
g f 4( ) 5( )
Press the Rotary encoder to play back a selected playlist.
To search for a song in the selected playlist
1 After selecting the playlist in step 2*1, press song search mode of the selected playlist. to change to the
An iPod or iPod mini can be controlled from the CDA-9851R when connected to an optional Alpine Interface Adapter for iPodTM (KCA420i). While connected to the CDA-9851R, operation from the iPod is no longer possible. · For details, refer to the Owner's Manual of the connected Interface adapter for iPodTM (KCA-420i). · For each function, refer to the iPod's documentation.
2 Turn the Rotary encoder within 10 seconds to select a song and press the Rotary encoder. The selected song is played back. · If you choose "iPod name" of iPod in step 2*1, all songs in iPod are played back.
Searching by artist name
Playback
1
Press
to select an ARTIST search mode.
1 2
Press SOURCE/POWER to switch to the iPod mode. Press g or f to select the desired song.
Return to the beginning of the current song: Press g. Fast backward: Press and hold g. Advance to the beginning of the next song: Press f. Fast forward: Press and hold f.
Each press changes the search mode. The search mode will automatically be changed to the ARTIST search mode 4 seconds after ARTIST has been selected.
PLAYLIST ARTIST ALBUM PLAYLIST
2*2 Turn the Rotary encoder within 10 seconds, and
select an artist.
3
Press the Rotary encoder to play back all songs of the selected artist.
To search for an album of the selected artist
1 After selecting the artist in step 2*2, press album search mode of the selected artist. to change to the
3
To pause playback, press :/J.
Pressing :/J again will resume playback.
· If a song is playing on the iPod when it is connected to the adapter, it will continue playing after the connection. · If using the iPod with a changer, the Versatile Link Terminal (KCA410C) must be used. In this case, press BAND to select the changer mode applicable to the iPod.
2*3 Turn the Rotary encoder within 10 seconds to select an album. 3 Press the Rotary encoder to play back all songs of the selected album.
To search for a song of the selected album
Searching for a desired Song
An iPod can contain hundreds of songs. By keeping these songs organized in playlists, the CDA-9851R can use these to ease song searches. · Press and hold for at least 2 seconds in the search mode to cancel the search mode.
1 After selecting the album in step 2*3, press to change to the song search mode of the selected album. 2 Turn the Rotary encoder within 10 seconds to select a song and press the Rotary encoder. The selected song is played back. · If you choose ALL in step 2*2, all songs in iPod are played back. · If you choose ALL in step 2*3, all songs of the selected artist are played back.
20-EN
Searching by album name
2
1
To cancel M.I.X. play, select (off) with the above procedure.
Press
to select the ALBUM search mode.
· For details of the search mode, refer to "Searching for a desired Song" (page 20). · If a song is selected in the album search mode before selecting Shuffle (M.I.X.), the songs will not play back randomly even when Shuffle album is selected. · If there is no album in the playlist, Shuffle (M.I.X.) will not function even when Shuffle album is selected.
Each press changes the search mode. The search mode will automatically be changed to the ALBUM search mode 4 seconds after ALBUM has been selected.
PLAYLIST ARTIST ALBUM PLAYLIST
2*4 Turn the Rotary encoder within 10 seconds, and
select an album.
3
Repeat Play
Only Repeat One is available for the iPod. Repeat One: A single song is repeatedly played back.
Press the Rotary encoder to play back all songs of the selected album.
To search for a song of the selected album
1 After selecting the album in step 2*4, press to change to the song search mode of the selected album. 2 Turn the Rotary encoder within 10 seconds to select a song and press the Rotary encoder. The selected song is played back. · If you choose ALL in step 2*4, all songs in iPod are played back.
1 2
Press 4 (
).
The song will be played repeatedly.
RPT (off) RPT (Repeat One) (Repeat One)
To cancel repeat play, select (off) with the above procedure.
· During repeat playback, no other songs are selectable by pressing g or f.
Quick Search
You can search for songs.
Displaying the Text
You can display the tag information of a song in the iPod.
1 2
Press and hold for at least 2 seconds to activate Quick Search mode. Turn the Rotary encoder within 10 seconds to select a desired song.
The selected song is played back immediately.
Press TITLE.
Each press changes the display.
Artist Name Album Name Song Title Elapsed Time Artist Name
· Press and hold for at least 2 seconds in the search mode to cancel the search mode. · The Quick search in the iPod mode takes more time than the normal Quick search. · "QUICK SEARCH" blinks in the display during Quick search.
Random Play Shuffle (M.I.X.)
The Shuffle function of the iPod is displayed as M.I.X. on the CDA9851R. Shuffle Albums (M.I.X. ALBUM): Select an album randomly in the iPod, and plays back the songs of the album in sequential order. If a song has been selected i