Text preview for : DSC-P8 L1.pdf part of SONY DSC-P8 S.M.
Back to : SONY DSC-P8.part1.rar | Home
DSC-P8
SERVICE MANUAL
Ver 1.0 2003. 03
Revision History LEVEL
1
US Model Canadian Model AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model
Link
SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS
· INSTRUCTION MANUAL is shown at the end of this document.
DIGITAL STILL CAMERA
DSC-P8
COVER
SPECIFICATIONS
x Camera [System]
Image device 6.67 mm (1/2.7 type) color CCD Primary color filter Total pixels number of camera Approx. 3 340 000 pixels Effective pixels number of camera Approx. 3 210 000 pixels Lens 3× zoom lens f = 6.0 18.0 mm (1/4 23/32 inches) (39 117 mm (1 9/16 4 5/8 inches) when converted to a 35 mm still camera) F2.8 5.2 Exposure control Automatic exposure, Scene selection (7 modes) White balance Flash, Automatic, Daylight, Cloudy, Fluorescent, Incandescent Data format (DCF compliant) Still images: Exif Ver. 2.2 JPEG compliant, GIF (for Clip Motion), DPOF compatible Audio with still image: MPEG1 compliant (Monaural) Moving images: MPEG1 compliant (Monaural) Recording media "Memory Stick" Flash Recommended distance (ISO set to Auto): 0.5 m to 3.5 m (19 3/4 inches to 11 feet 5 3/16 inches) (W) 0.5 m to 2.5 m (19 3/4 inches to 8 feet 2 7/16 inches) (T)
[Output connectors]
A/V OUT (MONO) (Monaural) Minijack Video: 1 Vp-p, 75 , unbalanced, sync negative Audio: 327 mV (at a 47 k load) Output impedance 2.2 k USB jack mini-B
x AC-LS5 AC Adaptor
Rated input voltage 100 to 240 V AC, 50/60 Hz, 11 W, 0.16 to 0.09 A Rated output voltage DC 4.2 V, 1.5 A in operating mode Operating temperature 0°C to 40°C (32°F to 104°F) Storage temperature 20°C to +60°C (4°F to +140°F) Dimensions Approx. 48×29×81 mm (1 15/16×1 3/16×3 1/4 inches) (W/H/D) Mass Approx. 130 g (5 oz)
[LCD screen]
Used LCD panel 3.8 cm (1.5 type) TFT drive Total number of dots 123 200 (560×220) dots
[General]
Used battery pack NP-FC11 Power requirements 3.6 V Power consumption (during shooting) 1.5 W Operating temperature 0°C to 40°C (32°F to 104°F) Storage temperature 20°C to +60°C (4°F to +140°F) Dimensions 108×51.5×35.1 mm (4 3/8×2 1/8×1 7/16 inches) (W/H/D, excluding maximum protrusions) Mass Approx. 200 g (7 oz) (including battery pack NP-FC11, "Memory Stick" and wrist strap) Built-in microphone Electret condenser microphone Built-in speaker Dynamic speaker Exif Print Compatible PRINT image matching II Compatible
x NP-FC11 battery pack
Used battery Lithium-ion battery Maximum voltage DC 4.2 V Nominal voltage DC 3.6 V Capacity 2.8 Wh (780 mAh)
Accessories
· · · · · · · · · NP-FC11 battery pack AC-LS5 AC Adaptor Power cord (mains lead) A/V connecting cable USB cable Wrist strap "Memory Stick" (16 MB) CD-ROM (USB driver SPVD-010) Operating instructions
Design and specifications are subject to change without notice.
SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. 5. 6. Check the B+ voltage to see it is at the values specified. Flexible Circuit Board Repairing · Keep the temperature of the soldering iron around 270°C during repairing. · Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). · Be careful not to apply force on the conductor when soldering or unsoldering.
2. 3.
4.
--2--
DSC-P8
COVER
SELF-DIAGNOSIS FUNCTION
[Description on Self-diagnosis Display]
Self-diagnosis display · C: ss: ss You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.) · E: ss: ss Contact your Sony dealer or local authorized Sony service facility.
Display Code C:32:ss C:13:ss E:61:ss E:91:ss
Countermeasure Turn the power off and on again. Format the "Memory stick". Insert a new "Memory Stick". Checking of lens drive circuit. Checking of flash unit or replacement of flash unit.
Cause Trouble with hardware. Unformatted memory stick is inserted. Memory stick is broken. When failed in the focus and zoom initialization. Abnormality when flash is being charged.
Caution Display During Error SYSTEM ERROR FORMAT ERROR MEMORY STICK ERROR
--
--3--
DSC-P8
COVER
Note:
1. MAIN PARTS
· Items marked "*" are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. · The parts numbers of such as a cabinet are also appeared in this section. Refer to the parts number mentioned below the name of parts to order. · Abbreviation HK : Hong Kong model J : Japanese model AUS: Australian model JE : Tourist model KR : Korean model CH : Chinese model CND: Canadian model
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiquens pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
1. ORNAMENTAL PARTS
jack cover 3-081-742-01 (SILVER) 3-081-742-11 (BLUE) 3-081-742-21 (RED) 3-081-742-51 (WHITE) (When change it, need dismantle the set.)
LCD window adhesive sheet 3-081-761-01
LCD window 3-081-770-01
--4--
DSC-P8
Checking supplied accessories.
Power cord (1) 0 1-696-819-11 (AUS) 0 1-769-608-11 (AEP, E) 0 1-776-985-11 (KR) 0 1-782-476-11 (CH) 0 1-783-374-11 (UK, HK) 0 1-790-107-22 (US, CND) 0 1-790-732-11 (JE, J)
AC adaptor AC-LS5 (1) 0 1-477-730-11 (EXCEPT CH) 0 1-477-730-21 (CH)
NP-FC11 battery pack (1)
Wrist strap (1) 3-070-841-01
Other accessories
3-080-890-02 MANUAL, INSTRUCTION (for BASIC) (JAPANESE) (J) 3-080-890-11 MANUAL, INSTRUCTION (ENGLISH) (US, CND, AEP, UK, E, AUS, CH, HK, JE) 3-080-890-21 MANUAL, INSTRUCTION (FRENCH, GERMAN) (CND, AEP) 3-080-890-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (AEP, E, JE) 3-080-890-41 MANUAL, INSTRUCTION (ITALIAN, DUTCH) (AEP) 3-080-890-51 MANUAL, INSTRUCTION (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, CH, HK, JE) 3-080-890-61 MANUAL, INSTRUCTION (RUSSIAN, SWEDISH) (AEP) 3-080-890-71 MANUAL, INSTRUCTION (ARABIC) (E) 3-080-890-81 MANUAL, INSTRUCTION (KOREAN) (KR) 3-080-891-01 MANUAL, INSTRUCTION (for APPLICATION) (JAPANESE) (J)
USB cable (1) 1-827-038-11
A/V connecting cable (1) 1-824-111-11
"Memory Stick" (16MB) (1)
CD-ROM (SPVD-010 USB driver) (1) 3-078-942-02 (EXCEPT US, CND, J) 3-078-943-02 (US, CND, J)
Conversion Adaptor (1) 0 1-569-008-12 (E)
Conversion Adaptor (1) 0 1-569-007-11 (E, JE)
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
9-876-226-41
Sony EMCS Co.
--5--
2003C0500-1 ©2003.3 Published by DI Customer Center
3-080-890-11(1)
Getting started ________________________
Digital Still Camera
Operating Instructions
Before operating the unit, please read this manual thoroughly, and retain it for future reference.
Shooting still images __________________
Viewing still images ___________________
Deleting still images ___________________
Owner's Record
The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DSC-P8 Serial No.
Before advanced operations _____________
Advanced still image shooting ____________
Advanced still image viewing_____________
Still image editing ______________________
Enjoying movies________________________
Enjoying images on your computer _________
Troubleshooting ________________________
Additional information ___________________
DSC-P8
© 2003 Sony Corporation
Index _________________________________
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Never expose the battery pack to temperature above 60°C (140°F), such as in a car parked in the sun or under direct sunlight.
If you have any questions about this product, you may call:
Sony Customer Information Center 1-800-222-SONY (7669) The number below is for the FCC related matters only.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/ TV technician for help. The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
For the Customers in the U.S.A.
Regulatory Information Declaration of Conformity
Trade Name: Model No.: Responsible Party: Address: Telephone No.: This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. SONY DSC-P8 Sony Electronics Inc. 680 Kinderkamack Road, Oradell, NJ 07649 U.S.A. 201-930-6972
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
2
For the Customers in the U.S.A. and Canada
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/ Caution: Do not handle damaged or leaking Lithium-Ion batteries.
BSI to BS 1362, (i.e., marked with mark) must be used.
or
"Memory Stick" and battery pack
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
Attention for the Customers in Europe
This product has been tested and found compliant with the limits sets out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).
For the Customers in the U.S.A. and Canada
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
Attention
The electromagnetic field at the specific frequencies may influence the picture and sound of this camera.
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the USB cable again.
Notice on the supplied AC Adaptor for the customers in the United Kingdom
A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or
Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority.
3
Before using your camera
Trial recording
Before you record one-time events, you may want to make a trial recording to make sure that the camera is working correctly.
Do not shake or strike the camera
In addition to malfunctions and inability to record images, this may render the "Memory Stick" unusable or image data breakdown, damage or loss may occur.
Clean the flash surface before use
The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.
No compensation for contents of the recording
Contents of the recording cannot be compensated for if recording or playback is not possible due to a malfunction of your camera or recording media, etc.
LCD screen, LCD finder (only models with an LCD finder) and lens
· The LCD screen and the LCD finder are manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen and the LCD finder. These points are normal in the manufacturing process and do not affect the recording in any way. · Be careful when placing the camera near a window or outdoors. Exposing the LCD screen, the finder or the lens to direct sunlight for long periods may cause malfunctions. · Do not press the LCD screen hardly. The screen may be uneven and that may cause a malfunction. · Images may be trailed on the LCD screen in a cold location. This is not a malfunction.
Do not get the camera wet
When taking pictures outdoors in the rain or under similar conditions, be careful not to get the camera wet. If moisture condensation occurs, see page 106 and follow the instructions on how to remove it before using the camera.
Back up recommendation
To avoid the potential risk of data loss, always copy (back up) data to a disk.
Do not expose the camera to sand or dust
Using the camera in sandy or dusty locations may cause malfunction.
Notes on image data compatibility
· This camera conforms with the Design rule for Camera File system universal standard established by the JEITA (Japan Electronics and Information Technology Industries Association). · Playback of images recorded with your camera on other equipment and playback of images recorded or edited with other equipment on your camera are not guaranteed.
Do not aim the camera at the sun or other bright light
This may cause irrecoverable damage to your eyes. Or it may cause the malfunction of your camera.
Notes on the camera locations
· Do not use the camera near a location that generates strong radio wave or emits radiation. The camera may not be able to record or play back properly. · Do not use the camera near a TV, radio, tuner. Noise may be caused on the camera.
Precaution on copyright
Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provision of the copyright laws.
The power zoom lens
This camera is equipped with a power zoom lens. Be careful not to bump the lens, and be careful not to apply force to it.
4
The pictures used in this manual
The photographs used as examples of pictures in this manual are reproduced images, and are not actual images shot using this camera.
Trademarks
· "Memory Stick," and "MagicGate Memory Stick" are trademarks of Sony Corporation. · "Memory Stick Duo" and are trademarks of Sony Corporation. · "Memory Stick PRO" and are trademarks of Sony Corporation. · "MagicGate" and are trademarks of Sony Corporation. · "InfoLITHIUM" is a trademark of Sony Corporation. · Microsoft and Windows are registered trademarks of the U.S. Microsoft Corporation in the United States and other countries. · Macintosh, Mac OS, QuickTime, iBook and Power Mac are trademarks or registered trademarks of Apple Computer, Inc. · Pentium is a trademark or a registered trademark of Intel Corporation. · In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the TM or ® marks are not used in all cases in this manual.
5
Table of contents
Before using your camera ......................... 4 Identifying the parts ................................. 8
Viewing still images
Viewing images on the LCD screen of your camera ............................................ 29 Viewing images on a TV screen............. 31
Getting started
Charging the battery pack ....................... 10 Using an external power source.............. 13 Using your camera abroad ...................... 13 Turning on/off your camera .................... 14 How to use the control button................. 14 Setting the date and time......................... 15
Deleting still images
Deleting images ...................................... 33 Formatting a "Memory Stick" ................ 36
Before advanced operations
How to setup and operate your camera .. 38 Changing the menu settings ............... 38 Changing the items in the SET UP screen ............................... 38 Deciding the still image quality.............. 39 Creating or selecting a folder ................. 39 Creating a new folder ......................... 40 Changing the recording folder ........... 40
Shooting still images
Inserting and removing a "Memory Stick" ............................. 17 Setting the still image size ...................... 18 Image size and quality ............................ 19 Basic still image shooting (using auto adjustment mode) ........................... 20 Checking the last image you shot -- Quick Review ............................ 22 Using the zoom feature....................... 22 Shooting close-ups -- Macro ............. 23 Using the self-timer ............................ 24 Selecting a flash mode........................ 25 Shooting images with the finder......... 27 Inserting the date and time on a still image .............................................. 28
Advanced still image shooting
Choosing an auto focus method ............. 41 Choosing a focus range finder frame -- AF range finder ......................... 41 Choosing a focus operation -- AF Mode ................................... 42 Setting the distance to the subject -- Focus preset .............................. 43
Adjusting the exposure -- EV adjustment ...........................44 Displaying a histogram .......................45 Selecting the metering mode...................46 Adjusting color tones -- White Balance ...........................47 Adjusting the flash level -- Flash level..................................48 Shooting multiple frames -- Clip Motion ...............................48 Shooting in Multi Burst mode -- Multi Burst.................................50 Shooting two images continuously -- Burst 2 .......................................50 Shooting still images for e-mail -- E-Mail ........................................51 Shooting still images with audio files -- Voice..........................................52 Shooting according to scene conditions -- Scene Selection..........................52 Adding special effects -- Picture Effect .............................54
6
Advanced still image viewing
Selecting the folder and playing back images -- Folder ............................56 Enlarging a portion of a still image.........57 Enlarging an image -- Playback zoom...........................57 Recording an enlarged image -- Trimming ...................................58 Playing back successive images -- Slide Show.................................58 Rotating still images -- Rotate.........................................59 Playing back images shot in Multi Burst mode ...............................................60 Playing back continuously ..................60 Playing back frame by frame -- Jog playback ..............................60
Enjoying movies
Shooting movies ..................................... 67 Viewing movies on the LCD screen....... 68 Deleting movies ...................................... 69 Editing movies ........................................ 70 Cutting movies.................................... 71 Deleting unnecessary portions of movies........................................ 72
Additional information
Number of images that can be saved or shooting time...................................98 Menu items............................................100 SET UP items ........................................104 Precautions ............................................106 On "Memory Stick" ..............................107 On "InfoLITHIUM" battery pack .........108 Specifications ........................................109 The LCD screen ....................................111
Enjoying images on your computer
Copying images to your computer -- For Windows users.................... 73 Copying images to your computer -- For Macintosh users .................. 83 Creating a Video CD .............................. 84
Index
Index......................................................114
Still image editing
Protecting images -- Protect........................................62 Changing image size -- Resize.........................................64 Choosing images to print -- Print (DPOF) mark ....................64
Troubleshooting
Troubleshooting ...................................... 86 Warnings and messages.......................... 95 Self-diagnosis display ............................. 97
7
Identifying the parts
See the pages in parentheses for details of operation.
1 2 3
Attaching the strap
7 8 9
4 5 0 6 qa
A B C D E F G H I POWER button (14) POWER lamp (14) Shutter button (20) Hook for wrist strap Flash (25) Speaker (bottom surface) Microphone Finder window Self-timer lamp (24)/ AF illuminator (26, 104) J Lens K Tripod receptacle (bottom surface)
· Use a tripod with a screw length of less than 5.5 mm (7/32 inch). You will be unable to firmly secure the camera to tripods having longer screws, and may damage the camera. · Do not touch the microphone while recording. · The "3.2 MEGA PIXELS" indicated on the camera shows the number of effective pixels. The number of actually recorded pixels is maximum 3.1 MEGA PIXELS. The effective pixels number is determined according to the recommendation of the JCIA (Japan Camera Industry Association).
8
1 2 3
9 0 qa
SET UP: To set the SET UP items : To shoot movies, Clip Motion images or Multi Burst mode images : To view or edit images J Zoom button (for shooting) (22)/ Index button (for viewing) (30) K Battery/"Memory Stick" cover L M N O P RESET button (86) Access lamp (17) Battery eject lever (10) Jack cover (USB) jack (77)
4 5 6 7 8
A Control button (Menu on) (v/V/b/B/z) (14)/ (Menu off) ( / /7/ ) (25, 24, 22, 23) B (Display/LCD on/off) button (27) C Finder (27) Self-timer (24)/recording lamp (red) (21) AE/AF lock lamp (green) (20) /CHG lamp (orange) (11, 25) D LCD screen E MENU button (38, 100) F DC IN jack (10, 13)
qs qd qf qg qh
/CHG
G A/V OUT (MONO) jack (31) H (Image Size/Delete) button (18, 33) I Mode dial (15, 21) : To shoot still images in auto adjustment mode : To shoot still images in programmed mode SCN: To shoot in the Scene Selection mode
9
Getting started
Charging the battery pack
Jack cover
DC plug
AC Adaptor
1
, Open the battery/"Memory Stick" cover.
Slide the cover in the direction of the arrow.
· Be sure to turn off your camera when charging the battery pack (page 14). · Your camera operates with the "InfoLITHIUM" NP-FC11 battery pack (C type) (supplied). You can use only C type battery pack (page 108).
2
Battery eject lever
3
, Open the jack cover and connect the AC-LS5 AC Adaptor (supplied) to the DC IN jack of your camera.
Open the cover in the arrow direction as illustrated above. Connect the plug with the v mark facing up.
· Do not short the DC plug of the AC Adaptor with a metallic object, as this may cause malfunction. · Clean the DC plug of the AC Adaptor with a dry cotton bud. Do not use the dirty plug. Use of the dirty plug may not properly charge the battery pack.
, Install the battery pack, then close the battery/"Memory Stick" cover.
Insert the battery pack with the B mark facing toward the battery compartment as illustrated. Make sure the battery pack is firmly inserted all the way, then close the cover.
· The battery pack is easily inserted by pushing the battery eject lever at the front of the battery compartment down.
10
To remove the battery pack
2 To wall outlet (wall socket)
Battery remaining indicator
The battery remaining indicator on the LCD screen shows the remaining shooting or viewing time.
60min
3.1M
Getting started
101
4
S AF
1
4
Power cord (mains lead) Battery eject lever
, Connect the power cord (mains lead) to the AC Adaptor and then to a wall outlet (wall socket).
The /CHG lamp (orange) lights up when charging begins, and goes off when charging is completed.
Open the battery/"Memory Stick" cover. Slide the battery eject lever in the direction of the arrow, and remove the battery pack.
· Be careful not to drop the battery pack when removing it.
· The black portion of the battery remaining indicator in the illustration shows the actual remaining time. · When you switch the LCD screen on/off, it takes about one minute for the correct battery remaining time to appear. · The displayed time remaining may not be correct under certain circumstances or conditions.
Charging time
/CHG
/CHG lamp
Approximate time to charge a completely discharged battery pack using the AC-LS5 AC Adaptor at a temperature of 25°C (77°F).
· After charging the battery pack, disconnect the AC Adaptor from the DC IN jack of your camera.
Battery pack NP-FC11 (supplied)
Charging time (min.) Approx. 150
11
Number of images and battery life that can be recorded/ viewed
The tables show the approximate number of images and the battery life that can be recorded/ viewed when you shoot images in normal mode with a fully charged battery pack at a temperature of 25°C (77°F). The numbers of images that can be recorded or viewed take into account changing the supplied "Memory Stick" as necessary. Note that the actual numbers may be less than indicated depending on the conditions of use.
Viewing still images2)
NP-FC11 (supplied) Image size 3.1M VGA No. of images Battery life (min.)
The battery power is low The battery capacity decreases as you use it more and more and as time passes (page 109). [AF Mode] is set to [Monitor] or [Cont] in the SET UP settings
Approx. 3850 Approx. 190 Approx. 3850 Approx. 190
The Power Save function
When the Power Save function is activated, you can shoot for a longer period of time. Set the mode dial to SET UP, and set [Power Save] in 1 (Setup 1) to [On]. The factory setting is [Off] (page 105).
· [Power Save] appears only when you use the camera with the battery back.
2) Viewing single images in order at about three second intervals
Shooting movies3)
NP-FC11 (supplied) LCD screen on Approx. 100 size
· The number of images and the battery life that can be recorded/viewed are decreased under the following conditions: The surrounding temperature is low The flash is used The camera has been turned on and off many times The zoom is used frequently [LCD Backlight] is set to [Bright] in the SET UP settings [Power Save] is set to [Off] in the SET UP settings
Shooting still images
Under the average conditions1)
Image size 3.1M VGA NP-FC11 (supplied) LCD No. of Battery life (min.) screen images On Approx. 200 Approx. 100 Off Approx. 250 Approx. 125 On Approx. 200 Approx. 100 Off Approx. 250 Approx. 125
LCD screen off Approx. 145
3) Shooting continuously at 160 (Mail) image
When [Power Save] is set to [On]
While charging the flash, the /CHG lamp flashes and the LCD screen turns off. After the charging is complete, the lamp goes out and the LCD screen turns on.
1) Shooting in the following situations: [P. Quality] is set to [Fine] Shooting one time every 30 seconds The zoom is switched alternately between the W and T ends The flash strobes once every two times The power turns on and off once every ten times.
12
Using an external power source
2 To wall outlet (wall socket) Jack cover
Using your camera abroad
Power sources You can use your camera in any country or area with the supplied AC Adaptor within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].
AC-LS5
Getting started
DC plug AC Adaptor 1 Power cord (mains lead)
1
, Open the jack cover and connect the AC-LS5 AC Adaptor (supplied) to the DC IN jack of your camera.
Connect the plug with the v mark facing up.
· Connect the AC Adaptor to an easily accessible wall outlet (wall socket) close by. If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
2
, Connect the power cord (mains lead) to the AC Adaptor and then to a wall outlet (wall socket).
· When you have finished using the AC Adaptor, disconnect it from the DC IN jack of the camera. · The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket) even if the set itself has been turned off.
· Do not use an electronic transformer (travel converter), as this may cause a malfunction.
13
Turning on/off your camera
POWER
How to use the control button
0EV
Auto power-off function
POWER button
POWER lamp
, Press POWER.
The POWER lamp (green) lights up and the power is on. When you turn on your camera for the first time, the Clock Set screen appears (page 15). Turning off the power Press POWER again. The POWER lamp goes out, and the camera turns off.
· Do not remove the battery pack or the AC Adaptor with the lens portion extended, as this may cause malfunction. · If you turn on the power when the mode dial is set to , , SCN or , the lens portion moves. Do not touch the lens portion while it is operating.
If you do not operate the camera for a while* during shooting or viewing or when performing SET UP, the camera turns off automatically to prevent wearing down the battery. The auto power-off function only operates when the camera is operating using a battery pack. The auto power-off function also will not operate in the following circumstances. · When viewing movies · When playing back a slide show · When a connector is plugged into the (USB) jack or the A/V OUT (MONO) jack.
* When [Power Save] is set to [On]: approximately 90 seconds When [Power Save] is set to [Off]: approximately three minutes
0EV EV WB ISO
WB
400 200 100 Auto ISO
To change the current settings of the camera, bring up the menu or the SET UP screen (page 38), and use the control button to make the changes. For each item, press v/V/b/B to select the desired value, then press the center z or b/B to make the setting.
14
Setting the date and time
Mode dial
Clock Set
POWER
2003 / 1 / 1 12 : 00
Y/M/D M/D/Y D/M/Y OK AM Cancel
Clock Set
Y/M/D M/D/Y D/M/Y
Getting started
2003 / 1 / 1
12 : 00
OK AM Cancel
OK
OK
POWER button
1
, Set the mode dial to .
· You can also carry out this operation when the , SCN, or . mode dial is set to · To change the date and time, set the mode dial to SET UP, select [Clock Set] in (Setup 1) 1 (pages 38 and 105), and perform the procedure from step 3.
2
, Press POWER to turn on the power.
The POWER lamp (green) lights up and the Clock Set screen appears on the LCD screen.
3
, Select the desired date display format with v/V on the control button, then press z.
Select from [Y/M/D] (year/month/day), [M/D/Y] (month/day/year) or [D/M/Y] (day/month/year).
· If the rechargeable button battery, which provides the power for saving the time data, is ever fully discharged (page 107), the Clock Set screen will appear again. When this happens, reset the date and time, by starting from step 3 above.
15
Clock Set
Y/M/D M/D/Y D/M/Y
Clock Set
Y/M/D M/D/Y D/M/Y
Clock Set
Y/M/D M/D/Y D/M/Y
2003 / 1 / 1
12 : 00
OK AM Cancel
2003 / 7 / 4
12 : 00
OK AM Cancel
2003 / 7 / 4
10 : 30
OK AM Cancel
OK
OK
OK
4
, Select the year, month, day, hour or minute item you want to set with b/B on the control button.
The item to be set is indicated with v/V.
5
, Set the numeric value with v/V on the control button, then press z to enter it.
After entering the number, v/V moves to the next item. Repeat this step until all of the items are set.
· If you selected [D/M/Y] in step 3, set the time on a 24-hour cycle.
6
, Select [OK] with B on the control button, then press z.
The date and time are entered and the clock starts to keep time.
· To cancel the date and time setting, select [Cancel] with v/V/b/B on the control button, then press z.
16
Shooting still images
Inserting and removing a "Memory Stick"
Terminal Side
Shooting still images
1
, Open the battery/"Memory Stick" cover.
Slide the cover in the direction of the arrow.
· For details on "Memory Stick," see page 107.
2
Label side
3
Access lamp
, Insert the "Memory Stick."
Insert a "Memory Stick" all the way in until it clicks as illustrated.
· Push the "Memory Stick" all of the way in so that it is securely seated in the connector. If the "Memory Stick" is not inserted correctly, you may not be able to record or display images with the "Memory Stick."
, Close the battery/"Memory Stick" cover.
To remove a "Memory Stick" Open the battery/"Memory Stick" cover, then push the "Memory Stick" to pop it out.
· Whenever the access lamp is lit, the camera is recording or reading an image. Never remove the "Memory Stick" or turn off the power at this time. The data may be corrupted.
17
Setting the still image size
Mode dial
3.1M
VGA
3.1M 2.8M(3:2) 2.0M 1.2M VGA
Image Size
3.1M 2.8M(3:2) 2.0M 1.2M VGA Image Size
1
, Set the mode dial to turn on the power. , and
2
, Press (Image Size).
The Image Size setup appears.
· For details on the image size, see page 19.
3
, Select the desired image size with v/V on the control button.
The image size is set. When the setting is complete, press (Image Size) so that the Image Size setup disappears from the LCD screen.
· The image size selected here is maintained even when the power is turned off.
· You can also carry out this operation when the mode dial is set to or SCN.
18
Image size and quality
You can choose image size (number of pixels) and image quality (compression ratio) based on the kind of images you want to shoot. The larger you make the image size and the higher you make the image quality, the better your image, but also the larger the amount of data needed to preserve your image. This means you can save fewer images in your "Memory Stick." Choose an image size and quality level appropriately for the kind of images you want to shoot. You can resize the images later (Resize function, see page 64). You can choose image size from among the five options in the following tables. The below image size is a minimum setting for examples. When you want to improve image quality, select the larger image size.
Image size 3.1M 2.0M 1.2M VGA
1)
The number of images that can be saved in a "Memory Stick"2)
The number of images that can be saved in Fine (Standard)3) mode are shown below. (Units: number of images)
Capacity Image size
16MB 10 (18) 10 (18) 16 (30) 24 (46)
32MB 20 (37) 20 (37) 33 (61) 50 (93)
64MB 41 (74) 41 (74)
128MB 82 (149) 82 (149)
MSX-256 MSX-512 MSX-1G 148 (264) 148 (264) 302 (537) 617 (1097) 302 (537) 617 (1097) 484 (907) 988 (1852) 1482 (2694) 5928 (14821)
Shooting still images
3.1M 2.8M(3:2) 2.0M 1.2M VGA
2)
66 (123) 133 (246) 238 (446)
101 (187) 202 (376) 357 (649) 726 (1320) 790 (1975) 1428 (3571) 2904 (7261)
97 (243) 196 (491) 394 (985)
When [REC Mode] is set to [Normal] For the number of images that can be saved in other modes, see page 98. 3) For more information about the image quality mode, see page 39. · The "3.2 MEGA PIXELS" indicated on the camera shows the number of effective pixels. The number of actually recorded pixels is maximum 3.1 MEGA pixels. · When 1600×1200 size images recorded using earlier Sony models are played back on this camera, "2.0M" indicator appears on the LCD screen. However, the actual image size is 1.9M in these cases. · When the images are viewed on the LCD screen of the camera, they all look the same size.
· Number of shooting images can differ from these values according to shooting conditions. · When the number of remaining shooting images is greater than 9999, the ">9999" indicator appears on the LCD screen.
Examples
2048×1536 Printing A4 size images 1632×1224 Printing A5 size images 1280×960 640×480 Printing postcard size images Creating home pages
2.8M(3:2) 2048 (3:2) 3:2 prints1)
This option records images in a horizontal to vertical proportion of 3:2 to match the size of the print paper used.
19
Basic still image shooting (using auto adjustment mode)
Mode dial
60min
VGA FINE 101
96
S AF
F2.8 30
1
, Set the mode dial to turn on the power. , and
2
, Hold the camera steadily with both hands and position the subject in the center of the focus frame.
Do not cover the lens, flash or microphone (page 8) with your fingers.
· The minimum focal distance to a subject is 50 cm (19 3/4 inches). To shoot subjects at distances closer than this, use the macro mode (page 23).
3
AE/AF lock indicator Flashes green t Light up
, Press and hold the shutter button halfway down.
The beep sounds but the image is not yet recorded. When the AE/AF lock indicator changes from flashing to steadily lit, the camera is ready for shooting. (The LCD screen may be frozen for a split second depending on the subject.)
· If you release the shutter button, shooting will be canceled. · When the camera does not beep, the AF adjustment is not complete. You can continue to shoot, but the AF is not set properly (except in Continuous AF, page 42). · The frame indicated on the LCD screen shows the focus adjustment range (AF range finder, page 41).
The name of the folder where the image will be recorded appears on the LCD screen for approximately five seconds.
· The lens cover opens when the power is turned on. · Do not touch the lens portion while it is operating, such as when you press POWER to turn on the power or when the zoom function is working (page 22). · This camera can create new folders and select folders to be stored in the "Memory Stick" (page 39).
20
60min
VGA
101
95
S AF
Mode dial for still image shooting
When shooting still images with your camera, you can choose from the following shooting methods. (Auto adjustment mode) The focus, exposure and white balance are automatically adjusted to allow easy shooting. The image quality is set to [Fine] and the AF range finder frame is set to [Multi AF] (page 41). (Programmed mode) You can set the desired shooting functions using menus (pages 41 and 100). SCN (Scene selection) You can select from the following modes to shoot according to the scene conditions (page 52).
(Fireworks mode) (High-speed shutter mode) (Beach mode) (Snow mode) (Landscape mode) (Twilight portrait mode) (Twilight mode)
Auto Focus
When you try to shoot a subject that is difficult to focus on, the AE/AF lock indicator changes to flashing slowly. The Auto Focus function may have difficulty working under the following conditions. In such cases, release the shutter button, then recompose the shot and focus again. · The subject is distant from the camera and dark. · The contrast between the subject and its background is poor. · The subject is seen through glass, such as a window. · A fast-moving subject. · The subject reflects or has a lustrous finish, such as a mirror or a luminous body. · A flashing subject. · A backlit subject. There are two Auto Focus functions: "AF range finder frame" which sets the focus position according to the subject position and size, and "AF mode" which sets the focus operation according to the AF response and the battery consumption. See page 41 for details.
Shooting still images
4
, Press the shutter button fully down.
The shutter sounds. The image will be recorded in the "Memory Stick." When the recording lamp (page 9) goes out, you can shoot the next image.
· When operating the camera using a battery pack, if you do not operate the camera for a while during recording or playback, the camera turns off automatically to prevent wearing down the battery (page 14).
21
Checking the last image you shot -- Quick Review
60min
Review
VGA
Using the zoom feature
101
8/8
W (wide-angle) T (telephoto)
60min
x1.1
VGA
Smart zoom
Digital processing lets you zoom in the image without deterioration. When the zoom exceeds 3×, enlargement is carried out using the smart zoom. When the smart zoom is not needed, set [Smart Zoom] to [Off] in the SET UP settings (page 104). When you press the zoom button, the zoom scaling indicator appears on the LCD screen.
Zoom scaling indicator The T side of this line shows the extent of smart zoom
101
60min
x5.0
VGA
101
96
S AF
96
S AF
101-0029
RETURN
2003 7 4 10:30PM
, Press b (7) on the control button.
To return to the normal shooting mode, press lightly on the shutter button or press b (7) again. To delete the image displayed on the screen 1 Press (Delete). 2 Select [Delete] with v on the control button, then press z. The image is deleted.
, Press the zoom buttons to choose the desired image size for shooting.
The minimum focal distance to the subject Approximately 50 cm (19 3/4 inches) from the end of the lens.
· The lens portion moves during zoom operation. Do not touch the lens portion while it is operating. · The zoom feature cannot be used while shooting movies (page 67).
x2.5
22
Shooting close-ups -- Macro
The maximum zoom scale depends on the image size. [2.0M]: 3.8× [1.2M]: 4.8× [VGA]: 9.6× When the image size is [3.1M] or [2.8M(3:2)], the smart zoom does not work.
· You cannot confirm the image with the finder when using the smart zoom function. · When using the smart zoom, the image on the LCD screen may look rough. However, this phenomenon has no effect on the recorded image. · AF range finder is not shown when using the smart zoom. When 9 (Focus) is set to [Multi AF] or [Center AF], or flashes and the centrally-located subject has priority to focus on.
60min
VGA
101
96
S AF
Shooting still images
1
The macro recording mode is used when zooming up a small subject, such as flowers or insects. You can shoot close-ups of subjects up to the distances specified below. When the zoom is set all the way to the W side: Approx. 10 cm (4 inches) from the lens surface When the zoom is set all the way to the T side: Approx. 50 cm (19 3/4 inches) from the lens surface
, Set the mode dial to , and press B ( ) on the control button.
The (macro) indicator appears on the LCD screen.
· If the menu is currently displayed, press MENU first so that the menu disappears. · You can also carry out this operation when the mode dial is set to or SCN (other than (Twilight mode), (Landscape mode) or (Fireworks mode), page 52) or .
23
Using the self-timer
60min
VGA FINE 101
60min
VGA
101
95 S AF F2.8 30
96
S AF
60min
VGA
FINE
101
96
S AF
F2.8 30
2
, Center the subject in the frame, and shoot the image.
To return to normal recording mode Press B ( ) on the control button again. The indicator disappears from the LCD screen.
· Use the LCD screen to shoot when using the macro feature. If you use the finder, the limits of what you see and what you actually shoot may be different.
1
, Set the mode dial to , and press V ( ) on the control button.
The (self-timer) indicator appears on the screen.
· If the menu is currently displayed, press MENU first so that the menu disappears. · You can also carry out this operation when the mode dial is set to , SCN or .
2
, Center the subject in the frame, and press the shutter button fully down.
The self-timer lamp (page 8) flashes and a beep sounds after you press the shutter button until the shutter operates (approximately 10 seconds later). To cancel the self-timer in the middle of the operation Press V ( ) on the control button again. The indicator disappears from the LCD screen.
· If you press the shutter button while standing in front of the camera, the focus and the exposure may not be correctly set.
24
Selecting a flash mode
· If the menu is currently displayed, press MENU first so that the menu disappears. · You can also carry out this operation when the mode dial is set to or (Clip Motion). · When [ISO] is set to [Auto] in the menu settings, the recommended shooting distance using the flash is approximately 0.5 m to 3.5 m (19 3/4 inches to 11 feet 5 3/16 inches) (W)/ 0.5 m to 2.5 m (19 3/4 inches to 8 feet 2 7/16 inches) (T). · You can change the brightness of the flash with [Flash Level] in the menu settings (page 48). (You cannot change the brightness of the flash while the mode dial is set to .) · When using the SL (Slow synchro) or (No flash) mode, the shutter speed becomes slower in dark places, so using a tripod is recommended. · While charging the flash, the /CHG lamp flashes. After the charging is complete, the lamp goes out. · This setting is maintained even when the power is turned off.
60min
VGA
101
96
S AF
Shooting images against a light source
In auto adjustment mode, shooting against a light source automatically strobes even when there is enough light around the subject (Daylight synchro).
Before strobed
Shooting still images
, Set the mode dial to , and press v ( ) on the control button repeatedly to select a flash mode.
Each time you press v ( ), the indicator changes as follows. No indicator (Auto): The flash automatically strobes when shooting images in a dark place or against a light source. (Forced flash): The flash strobes regardless of the surrounding brightness. SL (Slow synchro): The flash strobes regardless of the surrounding brightness. The shutter speed is slow in a dark place, so you can clearly shoot the background that is out of flash light. (No flash): The flash does not strobe.
When strobed
· Daylight synchro may not procedure the desired effects depending on shooting conditions. · When you do not want to use the flash, set the flash mode to (No flash).
25
To reduce the red-eye phenomenon when shooting live subjects
Set [Red Eye Reduction] to [On] in the SET UP settings (page 104). indicator appears on the LCD screen, and the flash pre-strobes before shooting to reduce the red-eye phenomenon.
Shooting images with the AF illuminator
The AF illuminator is fill light to focus more easily on a subject in dark surroundings. Set [AF Illuminator] (page 104) to [Auto] in the SET UP settings. ON appears on the LCD screen and the AF illuminator emits red light when the shutter button is pressed halfway until the focus is locked.
60min
VGA FINE 101
96
S AF ON
F2.8 30
· When 9 (Focus) is set to [Multi AF] or [Center AF], the AF range finder is not displayed. or flashes and the centrally-located subject has priority to focus on. · The AF illuminator operates only when SCN is set to (Beach mode), (Snow mode) or (Twilight portrait mode) in the menu settings (page 52). · The AF illuminator emits very bright light. Although there are no problems with safety, directly looking into the AF illuminator emitter at close range is not recommended, as you may see residual spots for several minutes afterwards, such as after looking into a flashlight.
m
· Red-eye reduction may not produce the desired effects depending on individual differences, the distance to the subject, if the subject does not see the pre-strobe, or other conditions.
· If AF illuminator light does not reach the subject sufficiently or the subject has no contrast, focus will not be achieved. (A distance up to approximately 3.5 m (11 feet 5 3/16 inches) (W)/2.5 m (8 feet 2 7/16 inches) (T) is recommended.) · Focus is achieved as long as AF illuminator light reaches the subject, even if the light is slightly off the center of the subject. · When the focus preset distance is set (page 43), the AF illuminator does not function.
26
Shooting images with the finder
Histogram on Finder
60min
VGA
101
96
S AF
r Indicators off
The finder is convenient when you want to save battery power, or when it is difficult to confirm the image using the LCD screen. Each time you press , the display changes in the following order.
r LCD screen off r Indicators on
60min
VGA
· The image through the finder does not indicate the actual recordable range. To confirm the recordable range, use the LCD screen. · For a detailed description of the indicators, see page 111. · Just as with the AE/AF lock indicator on the LCD screen, when the AE/AF lock lamp of the finder section stops flashing and remains on, you can start shooting (page 20). · When the LCD screen is turned off, the smart zoom does not function (page 22). · When the LCD screen is turned off, the AF Mode is set to [Single] (page 42). · If you press (Flash mode)/ (Self-timer)/ (Macro) with the LCD screen turned off, the image will be displayed on the screen for approximately two seconds so you can check or change the setting. · For a detailed description of the histogram, see page 45. · This setting is maintained even when the power is turned off.
Shooting still images
101
96
S AF
27
Inserting the date and time on a still image
Camera
Camera
Camera
1 2
Moving Image: AF Mode: Smart Zoom: Date/Time: Red Eye Reduction: AF Illuminator:
SELECT
MPEG Movie Single On Off Off Auto
1 2
Moving Image: AF Mode: Smart Zoom: Date/Time: Red Eye Reduction: AF Illuminator:
OK
Day&Time Date Off
1 2
Moving Image: AF Mode: Smart Zoom: Date/Time: Red Eye Reduction: AF Illuminator:
MPEG Movie Single On Date Off Auto
PAGE SELECT
1
, Set the mode dial to SET UP.
The SET UP screen appears.
· When images are shot with the date and time superimposed, the date and time cannot be removed later. · The date and time do not appear on the LCD screen during shooting, instead, indicator appears in the upper left corner of the LCD screen. The actual date and time appear in red during playback only.
2
, Select (Camera) with v on the control button, then press B. Select [Date/Time] with v/V, then press B.
· If you select [Date], the date is superimposed onto the image in the order selected in "Setting the date and time" (page 15).
3
, Select the date and time setting with v/V on the control button, then press z.
Day & Time: Superimposes the date, hour, and minute onto the image. Date: Superimposes the year, month and day onto the image. Off: Does not superimpose the date and time onto the image. After the setting has been completed, set the mode dial to , and shoot the image.
· You can also carry out this operation with the mode dial set to or SCN. · This setting is maintained even when the power is turned off.
28
Viewing still images
Viewing images on the LCD screen of your camera
Single (single-image) screen
60min
VGA
Viewing single images
Index (nine-image) screen
Index (triple-image) screen
60min
VGA
101
8/9
101
8/9
Aperture Value: Shutter Speed: Exposure Value: ISO:
F2.8 1/30 0.0 100
101-0008
BACK/NEXT
2003 7 4 10:30PM
VOLUME
Viewing still images
101-0008
BACK/NEXT
2003 7 4 10:30PM
VOLUME
SINGLE DISPLAY
MOVE
101-0002
SINGLE DISPLAY
2003 7 4 10:30PM
BACK/NEXT
1
, Set the mode dial to turn on the power. , and
You can view images shot with your camera almost immediately on the screen. You can select the following three methods for viewing images. Single (single-image) screen You can view one image at a time, displayed over the entire screen. Index (nine-image) screen Nine images are displayed simultaneously in separate panels on the screen.
Index (triple-image) screen Three images are displayed simultaneously in separate panels on the screen. Various image information items are also displayed.
· For details on viewing movies, see page 68. · For a detailed description of the indicators, see page 113.
The last image in the selected recording folder (page 56) appears on the screen.
29
Viewing an index screen (nine-image or triple-image)
60min
VGA
101
3/9
Aperture Value: Shutter Speed: Exposure Value: ISO:
F2.8 1/30 0.0 100
101-0003
BACK/NEXT
2003 7 4 10:30PM
VOLUME
101-0002
SINGLE DISPLAY MOVE SINGLE DISPLAY
2003 7 4 10:30PM
BACK/NEXT
2
, Select the desired still image with b/B on the control button.
b : To display the preceding image B : To display the next image
, Press the zoom W (index) button once.
The display switches to the index (nineimage) screen. To display the next (previous) index screen Press v/V/b/B on the control button to move the yellow frame up/down/left/right.
, Press the zoom W (index) button once more.
The display switches to the index (tripleimage) screen. Press v/V on the control button to display the remaining image information. To display the next (previous) index screen Press b/B on the control button. To return to the single-image screen Press the zoom T repeatedly, or press z on the control button.
30
Viewing images on a TV screen
VGA
101
2/9
A/V OUT (MONO) jack A/V connecting cable (supplied)
101-0002
BACK/NEXT
2003 7 4 10:30PM
VOLUME
Viewing still images
1
2
TV/Video switch
3
, Set the mode dial to turn on the camera. , and
, Connect the supplied A/V connecting cable to the A/V OUT (MONO) jack of the camera and the audio/video input jacks of the TV.
If your TV has stereo input jacks, connect the audio plug (black) of the A/V connecting cable to the left audio jack.
· Turn off both your camera and the TV before connecting the camera and the TV with the A/V connecting cable.
, Turn on the TV and set the TV/ Video switch to "Video".
· The name and location of this switch may differ depending on your TV. For a details, see the operating instructions supplied with the TV.
Press b/B on the control button to select the desired image.
· When using your camera abroad, it may be necessary to switch the video output signal to match that of your TV system (page 105).
31
Viewing images on a TV screen If you want to view images on a TV screen, you need a TV with a video input jack and a A/V connecting cable (supplied). The color system of the TV must match that of your digital still camera. Check the following lists: NTSC system Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica, Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc. PAL system Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Holland, Hong Kong, Italy, Kuwait, Malaysia, New Zealand, Norway, Portugal, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, United Kingdom, etc.
PAL-M system Brazil PAL-N system Argentina, Paraguay, Uruguay SECAM system Bulgaria, France, Guiana, Hungary, Iran, Iraq, Monaco, Poland, Russia, Ukraine, etc.
32
Deleting still images
Deleting images
60min
VGA
60min
101
VGA
2/9
101
2/9
60min
VGA
101
2/9
101-0002
BACK/NEXT
2003 7 4 10:30PM
VOLUME OK BACK/NEXT
Delete Exit
OK BACK/NEXT
Delete Exit
1
, Set the mode dial to , and turn on the camera. Press b/B on the control button to select the image you want to delete.
2
, Press (Delete).
The image has not yet been deleted at this point.
· You cannot delete the protected image (page 62).
3
, Select [Delete] with v on the control button, then press z.
When the message "Memory Stick access" disappears, the image has been deleted. To continue and delete other images Display the image to be deleted with b/B on the control button. Then, select [Delete] with v and press z. To cancel deleting Select [Exit] with V on the control button, then press z.
33
Deleting still images
Deleting images in index (nine-image) mode
Delete
Exit
Select
All In Folder
Delete
Exit
Select
All In Folder
SELECT
MOVE
TO NEXT
1
, While an index (nine-image) screen (page 30) is displayed, press (Delete).
2
, Select [Select] with b/B on the control button, then press z.
To delete all the images in the folder Select [All In Folder] with B on the control button, then press z. Select [OK], then press z. All of the unprotected images in the folder are deleted. To cancel deleting, select [Cancel], then press z.
3
, Select an image you want to delete with v/V/b/B on the control button, then press z.
The green (Delete) indicator appears on the selected image. At this point, the image has not yet been deleted. Repeat this step for all of the images you want to delete.
· To cancel a selection, press z again so that the indicator disappears.
34
Deleting images in index (triple-image) mode
Aperture Value: Shutter Speed: Exposure Value: ISO:
Delete Exit OK
F2.8 1/30 0.0 100
Delete Exit
101-0002
SINGLE DISPLAY
2003 7 4 10:30PM
BACK/NEXT
101-0002
OK
2003 7 4 10:30PM
BACK/NEXT
4
, Press (Delete) and select [OK] with B on the control button, then press z.
When the message "Memory Stick access" disappears, the images have been deleted. To cancel deleting Select [Exit] with b on the control button, then press z.
1
, While an index (triple-image) screen (page 30) is displayed, set the image you want to delete to the center with b/B on the control button.
2
, Press (Delete).
The image has not yet been deleted at this point.
35
Deleting still images
Formatting a "Memory Stick"
Memory Stick Tool
1
Delete Exit
OK Format: Cancel File Number: Create REC. folder: Change REC. folder:
2
101-0002
OK
2003 7 4 10:30PM
BACK/NEXT OK
3
, Select [Delete] with v on the control button, then press z.
When the message "Memory Stick access" disappears, the image has been deleted. To cancel deleting Select [Exit] with V on the control button, then press z.
1
, Insert the "Memory Stick" you want to format into the camera. Set the mode dial to SET UP, and turn on the power.
· The term "formatting" means preparing a "Memory Stick" to record images; this process is also called "initialization." The "Memory Stick" provided with this camera, and those available commercially, are already formatted, and can be used immediately. · When you format a "Memory Stick," be aware that all data in the "Memory Stick" will be permanently erased.
2
, Select (Memory Stick Tool) with v/V on the control button. Select [Format] with B, then press B. Select [OK] with v, then press z.
To cancel the formatting Select [Cancel] with V on the control button, then press z.
· Using the AC Adaptor is recommended to prevent the power from turning off partway through formatting.
36
Format All data will be erased
Ready? OK Cancel
OK
3
, Select [OK] with v on the control button, then press z.
The "Formatting" message appears. When this message disappears, the format is complete.
37
Deleting still images
Before advanced operations
How to setup and operate your camera
The usage of the menus and SET UP screen items that are most frequently used for "Advanced operations" is described below.
Changing the menu settings
a Press MENU.
The menu appears.
0EV
Changing the items in the SET UP screen
a Set the mode dial to SET UP.
The SET UP screen appears.
Camera
1
0EV
2
MENU Control button Mode dial
EV
WB
ISO
Moving Image: AF Mode: Smart Zoom: Date/Time: Red Eye Reduction: AF Illuminator:
SELECT
MPEG Movie Single On Off Off Auto
b Press b/B on the control button to select the item you want to set.
The selected item turns yellow.
b Press v/V/b/B on the control button to select the item you want to set.
The frame of the selected item turns yellow.
WB
400 200 100 Auto ISO
Setup 1
1 2
c Press v/V on the control button to select the desired setting.
The frame of the selected setting turns yellow, and the setting is entered.
Power Save: LCD Brightness: LCD Backlight: Beep: Language: Clock Set:
OK
OK Cancel
c Press z on the control button to enter the setting.
To turn off the menu display
Press MENU.
To turn off the SET UP screen display
Set the mode dial to anything other than SET UP.
38
Deciding the still image quality
Mode dial: /SCN
You can select the still image quality from [Fine] or [Standard].
MENU Control button Mode dial
c Select (P. Quality) with b/B, then select the desired image quality with v/V.
FINE
Creating or selecting a folder
Mode dial: SET UP
Your camera can create multiple folders within a "Memory Stick." You can select the folder used to store images. When not creating a new folder, "101MSDCF" folder is selected as the recording folder. You can create folders up to "999MSDCF."
MENU Control button Mode dial
Fine Standard P.Quality
Mode
PFX
· The image quality value selected here is preserved even when the camera is turned off. · You can also carry out this operation when the mode dial is set to (Multi Burst) (page 50).
Before advanced operations
a Set the mode dial to SCN. b Press MENU.
The menu appears.
or
· Up to 4000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created.
39
Creating a new folder
a Set the mode dial to SET UP. b Select (Memory Stick Tool) with v/V, [Create REC. Folder] with B/v/V, and [OK] with B/v, then press z.
The following screen appears.
60min
Create REC. Folder Creating REC. folder 102MSDCF Ready? OK Cancel
OK
Changing the recording folder
a Set the mode dial to SET UP. b Select (Memory Stick Tool) with v/V, [Change REC. Folder] with B/v/V, and [OK] with B/v, then press z.
The recording folder selection screen appears.
Select REC. Folder 102 Folder Name: 102MSDCF No. Of Files: 0 Created: 2003 7 4 1:05:34 AM OK Cancel
OK BACK/NEXT
2/2
c Select [OK] with v, then press z.
A new folder is created with a number one higher than the largest number in the "Memory Stick," and the folder becomes the recording folder.
c Select the desired folder with b/B, and [OK] with v, then press z.
To cancel folder creation
Select [Cancel] in step 2 or 3.
· Once you create a new folder, you cannot delete the new folder with the camera. · Images are recorded in the newly created folder until a different folder is created or selected.
To cancel changing the recording folder
Select [Cancel] in step 2 or 3.
· You cannot select the "100MSDCF" folder as a recording folder. · The image is stored in the newly selected folder. You cannot move images recorded with this camera to a different folder.
40
Advanced still image shooting
Choosing an auto focus method
There are two Auto Focus functions: "AF range finder frame" which sets the focus position according to the subject position and size, and "AF mode" which sets the focus operation according to the AF response and the battery consumption.
MENU Control button Mode dial
Choosing a focus range finder frame -- AF range finder
Mode dial: /SCN/
Multipoint AF
60min
VGA
FINE
101
98 S AF
Multipoint AF
The camera calculates the distance in three areas to the left and right and in the center of the image, letting you shoot using the auto focus function without worrying about the image composition. This is useful for focusing on a subject when it is not in the center of the frame. The AF range frame that was used changes to green after the focus is achieved.
AF range finder frame
Center AF
60min
VGA
FINE