Text preview for : Fujitsu P42HHA10 Service Manual.pdf part of fujitsu P42HHA10W Service Manual (US version)
Back to : Fujitsu P42HHA10 Service | Home
P42HHS10W P42HHA10W P-SU4H10W
FUJITSU
GENERAL
Proprietary
Copy Prohibited
CONTENTS
IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SETTING SIGNALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 VIDEO MODE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 RGB MODE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 TROUBLESHOOTING USING LED AND OSD . . . . . . . . . . . . . . . . . . . 47 TROUBLESHOOTING FLOWCHART . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 VOLTAGE OF EACH CONNECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 VS AND Vd ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 GENERAL CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . 66 DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 TRANSPORTATION AND HANDLING RESTRICTIONS . . . . . . . . . . . 103
IMPORTANT INFORMATION
WARNING :
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Please use a screen saver to prevent burning of an after-image on the screen. Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this unit, observe the following basic rules governing its installation, use and service. Please read these "Important Safeguards" carefully before use. Read all the safety and operating instructions before operating the unit. Retain the safety and operating instructions for future reference. Adhere to all warnings on the unit and in the operating instructions. Follow all operating instructions. Unplug the unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments not recommended by the manufacturer as they may be hazardous. Do not use the unit near water. Do not use the unit immediately after moving it from a low temperature to a high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Do not place the unit on an unstable cart, stand, or table. The unit may fall, causing serious injury to a child or adult, and serious damage to the unit. Mount the unit according to the manufacturer's instructions, using the mount recommended by the manufacturer. When the unit is used on a cart, avoid quick stops, excessive force, and uneven surfaces which may cause the unit and cart to overturn, damaging the unit or causing possible injury to the operator. When transporting by car, place the unit as shown in the figure. Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation and protect the unit from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the unit on a bed, sofa, rug, or similar surface. The unit should not be placed in a built - in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer's instructions are adhered to.) For proper ventilation, separate the unit from other equipment, which may obstruct ventilation. Keep the unit at least 10cm from other equipment. Operate only with the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. This unit is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you cannot insert the plug into the outlet, have an electrician install the proper outlet. Do not defeat the safety purpose of the grounded plug. Route power cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at doors, plugs, receptacles, and where they exit from the unit. For added protection during a lightning storm, or when the unit is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cabling. This will prevent damage to the unit by lighting and power line surges. Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in fire or electric shock. Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind onto the unit.
-2-
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltages and other hazards. Have all service done by qualified service personnel. Unplug this unit from the wall outlet and have it serviced by qualified service personnel in the following cases: a) If the power supply cord or plug is damaged. b) If liquid has been spilled, or objects have fallen onto the unit. c) If the unit has been exposed to rain or water. d) If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the Operation Manual, as improper adjustment of controls may result in damage and will often require extensive work by a qualified technician to restore the unit to normal operation. e) If the unit has been dropped or damaged in any way. f) A distinct change in performance indicates that service is required. When required, be sure the service technician uses replacement parts specified by the manufacturer or parts with the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. Upon completion of any service of repairs, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. Place the unit more than one foot away from heat sources such as radiators, heat registers, stoves, and other devices (including amplifiers) that produce heat. When connecting other devices such as VCR's and personal computers, turn off the power to this unit to protect against electric shock. Do not place combustibles such as cloth, paper, matches, aerosol cans or gas lighters that prevent special hazards when overheated behind the cooling fan. Use only the accessory cord designed for this unit to prevent shock. The power supply voltage rating of this unit is AC100-240V, but the attached power cord conforms to the following power supply voltage. Use only the Power Cord designated by our dealer to ensure Safety and EMC. When used with other power supply voltages, the power cable must be changed. Consult your local dealer.
Power Cord
Power supply voltage :
AC 100 - 125 V
AC 200 - 240 V
AC-240V (SAA TYPE)
-3-
SPECIFICATIONS Model : P42HHS10W/E
Power requirement PDP UNIT SELECTOR UNIT Current drain PDP UNIT SELECTOR UNIT Display panel Screen size Aspect ratio Number of pixels Pixel pitch Contrast ratio Luminance Viewing angle Input/Output Terminals of PDP unit DVI input
110-240V, 50/60Hz 110-240V, 50/60Hz 4.3A-1.8A 0.4A UB type 92.2(W) X 52.2(H) [cm] 36.3(W) X 20.6(H) [inch] 16 : 9 1,024(H) X 1024(V) pixels 0.90mm X 0.51mm 1000 : 1 1000 cd/m2 Max. 160 degrees
Analog RGB2/ RGB3 input User set mode Display frequency
mD-sub : 15pin(3 row type) Video : 0.7VP-P /75 SYNC signal : TTL level 8 memories (each RGB1,2,3) Horizontal : 15.63 to 80.0MHz Vertical : 50.0 to 120Hz Dot clock : 50MHz Max. XGA 68MHz
Digital RGB1 output DVI-D terminal (HDCP) Differential Input 0.5 + 10% (RXC + , RX0 + , RX1 + , RX2 + ) Analog audio input Two RCA terminals (one system) 500mVrms/22K
DVI-D terminal (HDCP) Differential Input 0.5 + 10% (RXC + , RX0 + , RX1 + , RX2 + ) Horizontal : 33.75MHz Vertical : 60Hz Dot clock : 40.5MHz Optical Input -27dB to -14.5dB Level terminal 10W+10W (L/R), 6
Digital(optical) audio Optical Input input -24dB to -14.5dB Digital(optical) audio Optical Input output for Display -21dB to -15dB for audio amp -21dB to -15dB Color system NTSC/PAL/SECAM/N-PAL/M-PAL /4.43NTSC/PAL60 16.7 million (256 each for R.G.B.) Width : 103.7cm (40.8 inch) Height : 64.2cm (25.3 inch) Depth : 8.5cm (3.3 inch) Width : 43.0cm (16.9 inch) Height : 9.5cm (3.7 inch) Depth : 37.0cm (14.6 inch) 28.5kg 4.5kg
Display frequency
Digital(optical) audio input Effective max. output Input/Output Terminals of SELECTOR unit Video input S video input
Display colors Outer dimensions PDP UNIT
RCA terminal 1.0VP-P /75 S terminal Y signal : 1.0VP-P /75 C signal : 0.286VP-P /75 Three RCA terminals (one system)
SELECTOR UNIT
Component video input
Net weight PDP UNIT SELECTOR UNIT
Y : 1.0VP-P /75 Pb/B-Y : 0.7VP-P /75 Pr/R-Y : 0.7VP-P /75
Video input (E model) Video S video RGB SCART terminal 1.0VP-P /75 Y signal : 1.0VP-P /75 C signal : 0.286VP-P /75 G : 0.7VP-P /75 B : 0.7VP-P /75 R : 0.7VP-P /75 DVI-D terminal (HDCP) Differential Input 0.5 + 10% (RXC + , RX0 + , RX1 + , RX2 + )
Environment (Operating) Temperature 0 to 40 Relative humidity 20 to 80% Pressure 800 to 1,114 hPa Accessories PDP UNIT User's manual Power cord Ferrite core (2) System cable (Video) System cable (Audio) Power cord Remote controller Batteries (Type AA x 2) User's manual (only E model)
SELECTOR UNIT
Digital RGB1 input
-4-
Options Stand Wall mounting unit Hanging unit Speaker Speaker stand
P-TT4200 P-WB4200 0 to 15 mounting angle P-CT4200 0 to 15 mounting angle P-SP4200 P-ST4200
Standards P42HHS10WS P42HHS10ES UL,CSA Safety:UL6500 C-UL EMC: FCC Part15 Class B ICES-003 Class B CE Safety: P-SU4H10WS P-SU4H10ES
UL6500 C-UL FCC Part15 Class B ICES-003 Class B
EN60065
EN60065 EN55013 EN55020 2001 1994
1998 EMC : EN55022 EN61000-3-2 1995 EN61000-3-3, 1995 EN55024 1998 EN61000-4-2, 1995 EN61000-4-3, 1996 EN61000-4-4, 1995 EN61000-4-5, 1995 EN61000-4-6, 1996 EN61000-4-8, 1993 EN61000-4-11,1994
AS Safety : IEC60065 EMC : AS/NZS 3548
IEC60065 AS/NZS 1053
-5-
Model : P42HHA10W/E
Power requirement Current drain Display panel Screen size Aspect ratio Number of pixels Pixel pitch Contrast ratio Luminance Viewing angle Input Terminals Video input S video input 110-240V, 50/60Hz 4.4-1.9A UB type 92.0(W) X 51.8(H) [cm] 36.2(W) X 20.4(H) [inch] 16 : 9 1,024 (H) X 1024 (V) pixels 0.90mm X 0.51mm P42HHA10 1000 : 1 (typ.) 1000 cd/m 2 (ryp.) Max. 160 degrees BNC connector 1.0VP-P /75 S terminal Y signal:1.0VP-P /75 C signal:0.286VP-P /75 Three BNC terminals Y : 1VP-P /75 Pb /B-Y: 0.7VP-P /75 Pr /R-Y: 0.7VP-P /75
24Pin DVI-D (HDCP) Differential Input 0.5V + 10% (RXC +, RX0+, RX1+, RX2 + ) mD-sub:15pin (3 row type) Video : 0.7VP-P /75 SYNC signal : TTL level BNC terminal x 5 R: 0.7VP-P/75 G: 0.7VP-P/75 B: 0.7VP-P/75 H: TTL level or 0.3VP-P /75 V: TTL level or 0.3VP-P /75 8 memories (each RGB1,2,3) Horizontal :15.63 to 80.0MHz Vertical : 50.0 to 120Hz Dot clock:50MHz Max XGA 68MHz Max D-sub 9 pin terminal NTSC/PAL/SECAM/N-PAL/M-PAL /4.43NTSC/PAL60 16.7 million (256 each for R.G.B.) 2 pin terminals(three system) 500mVrms/22k Level terminal 20W+20W (L/R), 4 Width : 103.5cm (40.7 inch) Height: 64.2cm (25.2 inch) Depth : 8.5 cm ( 3.3 inch) Net weight 28.5kg
Environment (Operating) Temperature 0 to 40 C Relative humidity 20 to 80% Pressure 800 to 1,114 hPa
Accessories
User's manual Remote controller Batteries (Type AA x 2) Power cord Ferrite core (2) P-TT4200 P-WB4200 0 to 15 mounting angle
Options Stand Wall mounting unit
Component video input
Hanging unit Speaker Speaker stand Standards P42HHA10W P42HHA10E
P-CT4200 0 to 15 mounting angle P-SP4200 P-ST4200
RGB 1 input
RGB 2 input
RGB 3 input
UL,CSA Safety:UL6500 CSA C22.2 No. EMC: FCC Part15 Class A ICES-003 Class A CE Safety:
UL6500 CSA C22.2 No. FCC Part15 Class B ICES-003 Class B
User set mode Display frequency
EN60065 A1 A2 A3 A4
1992 1993 1993 1995 1997
EN60065 A1 A2 A3 A4 EN55022 Class B EN61000-3-2, EN61000-3-3, EN55024 EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11,
1992 1993 1993 1995 1997 A1/A2 1995 1995 1998 1995 1996 1995 1995 1996 1993 1994
RS-232C Color system Display colors Audio input Effective max. output Dimensions
EMC : EN55022 A1/A2 Class A EN61000-3-2, 1995 EN61000-3-3, 1995 EN55024 1998 EN61000-4-2, 1995 EN61000-4-3, 1996 EN61000-4-4, 1995 EN61000-4-5, 1995 EN61000-4-6, 1996 EN61000-4-8, 1993 EN61000-4-11,1994
AS Safety : I60065 A1/A2/A3/A4 I60065 A1/A2/A3/A4 EMC : AS/NZS 3548 AS/NZS 3548
-6-
SETTING SIGNALS
This display can store parameter settings for eight additional signals for RGB. To do this, select the desired signal and follow "RGB MODE ADJUSTMENT" in the manual to adjust the parameters. When you finish, the settings will be automatically stored.
FACTORY SET SIGNALS (RGB MODE)
Main corresponding signals (RGB mode) Display (dots x lines) 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024 1600 x 1200 1600 x 1200 848 x 480 852 x 480 1360 x 768 720 x 485 720 x 575 Horizontal frequency (kHz) 31.47 37.50 43.27 31.47 37.88 46.88 53.67 48.36 60.02 68.68 63.98 79.98 75.00 106.25 31.02 31.72 47.71 15.73 15.63 Vertical frequency (Hz) 59.94 75.00 85.01 70.09 60.32 75.00 85.06 60.00 75.03 84.99 60.02 75.03 60.00 85.00 60.00 59.97 60.01 59.94 50.00 60 fields 50 fields VGA VGA 75 Hz VGA 85 Hz 400 lines SVGA 60 Hz SVGA 75 Hz SVGA 85 Hz XGA 60 Hz XGA 75 Hz XGA 85 Hz SXGA 60 Hz SXGA 75 Hz UXGA 60 Hz UXGA 85 Hz Signal DVD-I
* With some input signals, "Out of range" may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA, 75 Hz or less for XVGA/ SXGA , 60 Hz or less for UXGA.
-7-
FACTORY SET SIGNALS (Component video mode) Horizontal frequency (kHz) Vertical frequency (Hz) Signal
FACTORY SET SIGNALS (Video, S-video mode) Horizontal frequency (kHz) Vertical frequency (Hz) Signal
15.73 15.63 31.47 31.25 45.00 37.50 33.75 28.13
59.94 50.00 59.94 50.00 60.00 50.00 60.00 50.00
SDTV 480i SDTV 576i SDTV 480p SDTV 576p HDTV 720p HDTV 720p HDTV 1,080i HDTV 1,080i
15.73 15.63 15.63 15.63 15.63 15.73 15.73
59.94 50.00 50.00 59.52 50.00 59.95 59.94
NTSC PAL SECAM PAL 60 N-PAL M-PAL 4.43 NTSC
The dedicated graphics card is optional. In the 800 x 600 and 1,024 x 768 modes, images of reduced size are displayed on the screen, using size reduction and interpolation. Also note that on-screen information is also displayed in reduced size. " Out of range" appears if the display receives a signal whose characteristic does not fall within the display's permissible range. You can check the input signals with "Information" on the OTHERS Menu screen.
RGB INPUT TERMINAL
Pin No. Input signal Pin No. Input signal
The sync switch (TTL/ANALOG switch) is on the rear of the 13-pin horizontal sync and 14-pin vertical sync terminals.
1 2 3 4 5 6 7 8
Red Green Blue Ground Ground Ground Ground
9 10 11 12 13 14 15 Outer side
Ground
Horiz. sync Vert. sync Ground
RS-232C INPUT TERMINAL
Pin No. Pin No. No. signal
1 2 3 4 5 6 7 8 9
DCD (Data Carrier Detect) RD (Receive Data) TD (Transmit Data) DTR (Data Terminal Ready) GND (Ground) DSR (Data Set Ready) RTS (Request To Send) CTS (Clear To Send) RI (Ring Indication)
DVI-D INPUT TERMINAL
-8-
SCART TERMINAL
20 1816 1412 10 8 6 4 2
Pin No. 1 2 3 4 5 6
Input Signal Right audio Audio ground Blue ground Left audio Blue
Pin No. 8 9 10 11 12 13 14
Input Signal Green ground Green Red ground
Pin No. 15 16 17 18 19 20 21
Input Signal Red/chrominance
Composite video ground Composite video/Y Ground
21 17 13 9 5 1 19 15 11 7 3
7
-9-
CONNECTION Model : P42HHS10W/E
BASIC SYSTEM CONNECTIONS
Display Speaker (optional)
3-pin outlet
Selector
3-pin outlet
1. Connect the following items to the selector and the display Selector and display Connect these two with the provided system connection cable. (For details, see the page on the right.)a Speakers For how to connect speakers, see the instructions provided with the speakers. 2. Connecting the power cord Connect the power plug of the display and selector power cords to a 3-pin outlet.
- 10 -
Model : P42HHS10W
CONNECTING THE DISPLAY AND THE SELECTOR
Rear side of display
Left speaker cable
Right speaker cable Red Black
Power input
Display input terminal
Audio terminal
Picture terminal
To AC outlet
VIDEO1
VIDEO2
VIDEO4
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
AUDIO OUTPUT
Y
PB/CB
PICTURE INPUT COMPONENT VIDEO
Y
PR/CR VIDEO5
Y
PB/CB
PR/CR VIDEO1
Y
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
Rear side of selector
- 11 -
Model : P42HHS10W/E
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
Speaker Display Speaker (optional) Remote control
Selector
VCR
Satellite tuner
PC
DVD player
Video camera
Videogame machine Amplifier
- 12 -
Model : P42HHS10W
VCR
Connect the video signal cable to either the S-video input terminal or the video input terminal.
To S-video output
To video output
To audio outputs
To audio inputs
VIDEO1 VIDEO2
To video input
VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
AUDIO OUTPUT
Y
PB/CB
PICTURE INPUT COMPONENT VIDEO
Y
PR/CR VIDEO5
Y
PB/CB
PR/CR VIDEO1
Y
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
Rear side of selector
To S-video input
- 13 -
DVD PLAYER
Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To video output To S-video output To audio outputs To component video output
VIDEO1 VIDEO2
To audio inputs
VIDEO4 VIDEO5 VIDEO6
To video input
RGB1 RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
AUDIO OUTPUT
Y
PB/CB
PICTURE INPUT COMPONENT VIDEO
Y
PR/CR VIDEO5
Y
PB/CB
PR/CR VIDEO1
Y
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
Rear side of selector
To component video input To S-video input
AMPLIFIER
Connect the audio signal cable to either the digital output or the analog audio output. The signal input as digital input is not output as analog audio. The digital audio input terminal on the display complies with a sampling frequency of 48 kHz. In the case of outputs with another frequency, connect to an audio system (amplifier) .
To digital audio input
To analog audio input
To analog audio output
VIDEO1 VIDEO2 VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2
To digital audio output
AUDIO OUTPUT
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
Y
PB/CB
PICTURE INPUT COMPONENT VIDEO
Y
PR/CR VIDEO5
Y
PB/CB
PR/CR VIDEO1
Y
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
Rear side of selector
- 14 -
SATELLITE TUNER
Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To S-video output
To video output To audio outputs To component video output To audio inputs
VIDEO1 VIDEO2 VIDEO4 VIDEO5 VIDEO6 RGB1
To video input
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
AUDIO OUTPUT
Y
PB/CB
PICTURE INPUT COMPONENT VIDEO
Y
PR/CR VIDEO5
Y
PB/CB
PR/CR VIDEO1
Y
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
To component video input To S-video input
- 15 -
Model : P42HHS10W/E
VIDEO CAMERA
A video camera can conveniently be connected to the Video 3 input on the front side. Connect the video signal cable to either the S-video input terminal or the video input terminal. If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
To video and audio outputs
To video and audio inputs
To S-video output
To S-video input
VIDEOGAME MACHINE
As the connecting cable differs with videogame machines, please consult the instructions for your videogame machine. Connect the video signal cable to either the S-video input terminal or the video input terminal. Ensure that the same image (pattern) is not displayed on the screen for an extended period. If the same image is displayed on the screen for an extended period, the brightness of that part of the screen may change and image burn-in may leave an after-image on the screen. If the videogame machine to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
To video and audio outputs
To video and audio inputs
To S-video output
To S-video input
Front side of selector
- 16 -
Model : P42HHS10W
PC
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (mD-sub)
To audio output
To audio input
To RGB3 input (mD-sub)
When connecting to the front side of the selector
To RGB output (mD-sub) To audio output To RGB output (DVI-D) To RGB1 input (DVI-D) To RGB2 input (mD-sub) To audio input
VIDEO1
VIDEO2
VIDEO4
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
AUDIO OUTPUT
Y
PB/CB
PICTURE INPUT COMPONENT VIDEO
Y
PR/CR VIDEO5
Y
PB/CB
PR/CR VIDEO1
Y
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
When connecting to the rear side of the selector
- 17 -
Model : P42HHS10E
Rear side of display
Left speaker cable
Right speaker cable Red Black
Power input
Display input terminal
Audio terminal
Picture terminal
To AC outlet
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
AUDIO OUTPUT
PICTURE INPUT COMPONENT VIDEO
Y
VIDEO5 COMPONENT VIDEO
VIDEO1 mD-sub
RGB2
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
Rear side of selector
- 18 -
VCR
Connect the video signal cable to the SCART terminal.
To SCART output
To SCART input
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
AUDIO OUTPUT
PICTURE INPUT COMPONENT VIDEO
Y
VIDEO5 COMPONENT VIDEO
VIDEO1 mD-sub
RGB2
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
Rear side of selector
- 19 -
DVD PLAYER
Connect the video signal cable to either the component video terminal or the SCART terminal. If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To audio outputs To SCART output To component video output To SCART input
VIDEO5
To audio inputs
VIDEO6 RGB1 RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
AUDIO OUTPUT
PICTURE INPUT COMPONENT VIDEO
Y
VIDEO5 COMPONENT VIDEO
VIDEO1 mD-sub
RGB2
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
Rear side of selector
To component video input
AMPLIFIER
Connect the audio signal cable to either the digital output or the analog audio output. The signal input as digital input is not output as analog audio. The digital audio input terminal on the display complies with a sampling frequency of 48 kHz. In the case of outputs with another frequency, connect to an audio system (amplifier) .
To digital audio input
To analog audio input
To analog audio output
VIDEO5 VIDEO6 RGB1 RGB2
To digital audio output
AUDIO OUTPUT
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
PICTURE INPUT COMPONENT VIDEO
Y
VIDEO5 COMPONENT VIDEO
VIDEO1 mD-sub
RGB2
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
Rear side of selector
- 20 -
SATELLITE TUNER
Connect the video signal cable to either the component video terminal or the SCART terminal. If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To audio outputs
To SCART output To component video output
To SCART input
VIDEO5
To audio inputs
VIDEO6 RGB1 RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
AUDIO OUTPUT
PICTURE INPUT COMPONENT VIDEO
Y
VIDEO5 COMPONENT VIDEO
VIDEO1 mD-sub
RGB2
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
Rear side of selector
To component video input
- 21 -
PC
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (mD-sub)
To audio output
To audio input
To RGB3 input (mD-sub)
When connecting to the front side of the selector
To RGB output (mD-sub) To audio output To RGB output (DVI-D) To RGB1 input (DVI-D) To RGB2 input (mD-sub) To audio input
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
AUDIO OUTPUT
PICTURE INPUT COMPONENT VIDEO
Y
VIDEO5 COMPONENT VIDEO
VIDEO1 mD-sub
RGB2
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
When connecting to the rear side of the selector
- 22 -
Model : P42HHA10W/E
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
Speaker Display Speaker (optional) Remote control
VCR
Satellite tuner
PC
DVD player
- 23 -
Model : P42HHA10W
VCR
Connect the video signal cable to either the S-video input terminal or the video input terminal.
To audio outputs To video output
To S-video output
To audio inputs
To S-video input
To video input
Bottom of Display (Ex.: P42VHA10)
- 24 -
DVD PLAYER
Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To video output To audio outputs To S-video output To component video output To component video input
To audio inputs
To S-video input
To video input
Bottom of Display (Ex.: P42VHA10)
SATELLITE TUNER
Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To video output To S-video output To component video output To audio outputs
To audio inputs
To S-video input
To video input
Bottom of Display (Ex.: P42VHA10)
- 25 -
PC
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (DVI-D) To RGB output (mD-sub) To audio output To RGB2 input (mD-sub) To audio input To RGB1 input (DVI-D)
Bottom of Display (Ex.: P42VHA10)
- 26 -
Model : P42HHA10E
VCR
Connect the video signal cable to the SCART terminal. (When the P-TE1000E is installed.) Connect the video signal to either the S-video input terminal or the video input terminal. (When the P-TE1010E is installed.)
To SCART output
To SCART input
An example of the underside of the display (with the P-TE1000E installed in the P42VHA10)
To video output To S-video output To audio output
To audio input
To S-video input
To video input
An example of the underside of the display (with the P-TE1010E installed in the P42VHA10)
- 27 -
DVD PLAYER
Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.) Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. (When the P-TE1010E is installed.) If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To SCART output
To component video output To audio output To component video input To SCART input To audio input
An example of the underside of the display (with the P-TE1000E installed in the P42VHA10)
To component video output To video output To S-video output To audio output
To audio input
To S-video input
To component video input
An example of the underside of the display (with the P-TE1010E installed in the P42VHA10)
- 28 -
SATELLITE TUNER
Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.) Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. (When the P-TE1010E is installed.) If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To SCART output
To component video output To audio output To component video input To SCART input To audio input
An example of the underside of the display (with the P-TE1000E installed in the P42VHA10)
To component video output To video output To S-video output To audio output To video input
To audio input
To S-video input
To component video input
An example of the underside of the display (with the P-TE1010E installed in the P42VHA10)
- 29 -
PC
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (DVI-D) To RGB output (mD-sub) To audio output To RGB2 input (mD-sub) To audio input To RGB1 input (DVI-D)
An example of the underside of the display (with the P-TE1000E installed in the P42VHA10)
- 30 -
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
Speaker Display Speaker (optional) Remote control
PC
- 31 -
PC
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (DVI-D) To RGB output (mD-sub) To audio output To RGB2 input (mD-sub)
To audio input
To RGB1 input (DVI-D)
Bottom of Display (Ex.: P42VHA10)
- 32 -
PART NAMES AND FUNCTIONS
DISPLAY SECTION FRONT
Power indicator lamp
(Right section)
This lamp shows the state of the power supply. Lit (red): Lit (green): Lit (orange): Stand-by Power ON Power saving (DPMS: Power saving function) mode ON Flashing (red): Malfunction (Flashes differently depending on the type of malfunction.) Remote control signal receiver Receives signals from the remote control. Input mode selector button Input mode selector button [MODE] [MODE]
Switches between picture input modes. VOL + button VOL - button Adjusts the sound volume. Wide screen selector button [WIDE] Switches the screen over to a desired wide screen. ON/OFF button Turns the power "ON" and "OFF (standby state)".
Control Panel (Right side of display)
- 33 -
Model : P42HHS10W/E
DISPLAY SECTION LOWER PART
power switch When pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the power can be turned "ON" or "OFF" by the remotye control or on the control panel of the display. When passed while in the "ON " state, the power indicator lamp goes out and the display is placed in the "OFF" state. Display input (picture) terminal Connect this terminal to the display output terminal on the tuner using the special cable provided. Display input (audio) terminal Connect this terminal to the display output terminal on the tuner using the special cable provided. External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. When connecting a cable, attach a ferrite core to the cable. *See the speakerer instruction manual for more information. Power input terminal Connect this terminal to the power cable supplied with the display.
- 34 -
Model : P42HHA10W
DISPLAY SECTION LOWER PART
Bottom
/I power switch When pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the power can be turned "ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON " state, the power indicator lamp goes out and the display is placed in the "OFF" state where power is still partly supplied. RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. RGB1 input terminal (RGB1 INPUT/DVI-D) Connect this terminal to the PC's display (digital RGB) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded. RGB2 input terminal (RGB2 INPUT/mD-sub) Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. Power input terminal Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable. External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. When connecting a cable, attach a ferrite core to the cable. *See the speaker instruction manual for more information. Audio1 input terminal (AUDIO1 INPUT) Audio2 input terminal (AUDIO2 INPUT) Audio3 input terminal (AUDIO3 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. Component video input terminal (VIDEO3 INPUT) Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player. S-Video input terminal (VIDEO2 INPUT) Connect this terminal to the S-video output terminal of your VCR. Video input terminal (VIDEO1 INPUT) Connect this terminal to the video output terminal of your VCR. Component video input terminal (VIDEO4 INPUT) Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.
- 35 -
Model : P42HHA10E
DISPLAY SECTION - LOWER PART
Bottom
Videoboard
P-TE1000E type P-TE1010E type
/I power switch When pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the power can be turned "ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON " state, the power indicator lamp goes out and the display is placed in the "OFF" state where power is still partly supplied. RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. RGB1 input terminal (RGB1 INPUT/DVI-D) Connect this terminal to the PC's display (digital RGB) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded. RGB2 input terminal (RGB2 INPUT/mD-sub) Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. Power input terminal Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable. External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. When connecting a cable, attach a ferrite core to the cable. *See the speaker instruction manual for more information. Audio3 input terminal (AUDIO3 INPUT) Audio2 input terminal (AUDIO2 INPUT) Audio1 input terminal (AUDIO1 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. + RGB3 input terminal (RGB3 INPUT/BNC) Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner,etc.) output terminal. *When RGB3 input terminal is connected, Comp.video mode is not available. Component video input terminal (VIDEO4 INPUT) Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player. *When Comp.video input terminal is connected, RGB3 mode is not available. RGB3 synchronization switch (SYNC SW TTL/ANALOG (75 )) This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 . TTL : Does not terminate. ANALOG (75 ): Terminates. Video1 input terminal (VIDEO1 INPUT/P-TE1000E) Connect this terminal to the SCART terminal of your VCR or DVD, etc. S-Video input terminal (VIDEO2 INPUT/P-TE1010E) Connect this terminal to the S-video output terminal of your VCR. Video input terminal (VIDEO1 INPUT/P-TE1010E) Connect this terminal to the video output terminal of your VCR. Component video input terminal (VIDEO3 INPUT/P-TE1010E) Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player.
- 36 -
DISPLAY SECTION LOWER PART
Bottom
/I power switch When pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the power can be turned "ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON " state, the power indicator lamp goes out and the display is placed in the "OFF" state where power is still partly supplied. RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. RGB1 input terminal (RGB1 INPUT/DVI-D) Connect this terminal to the PC's display (digital RGB) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded. RGB2 input terminal (RGB2 INPUT/mD-sub) Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. Power input terminal Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable. External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. When connecting a cable, attach a ferrite core to the cable. *See the speaker instruction manual for more information. Audio3 input terminal (AUDIO3 INPUT) Audio2 input terminal (AUDIO2 INPUT) Audio1 input terminal (AUDIO1 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. RGB3 input terminal (RGB3 INPUT/BNC) Connect this terminal to the PC's display (analog RGB) output terminal. RGB3 synchronization switch (SYNC SW TTL/ANALOG (75 )) This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 . TTL : Does not terminate. ANALOG (75 ) : Terminates.
- 37 -
Model : P42HHS10W/E
SELECTOR SECTION FRONT
Power indicator lamp This lamp shows the state of the power supply. Lit (red): Lit (green): Lit (orange): Stand-by Power ON Power saving (DPMS: Power saving function) mode ON
Flashing (red): Malfunction Remote control signal receiver Receives signals from the remote control. POWER button Turns the power "ON" and "OFF". * Even when the power is "OFF", some parts are still powered. Video3, S-video input terminal * Connect this terminal to the S-video output terminal of your VCR, etc. Video3, video input terminal * Connect this terminal to the video output terminal of your VCR, etc. Audio input terminals (L/R) These are the audio input terminals for the Video3 and RGB3 terminals. Input the audio for the video to be seen here. RGB3 input terminal Connect this terminal to your PC's mD-sub output terminal. * On selecting the video input format
- 38 -
Model : P42HHS10W
SELECTOR SECTION REAR
VIDEO1
VIDEO2
VIDEO4
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
AUDIO OUTPUT
Y
PB/CB
PICTURE INPUT COMPONENT VIDEO
Y
PR/CR VIDEO5
Y
PB/CB
PR/CR VIDEO1
Y
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
Audio input terminals Input audio through the terminals corresponding to the used video input terminals. The digital input terminals can be matched as desired with the remote control. Audio output terminals For use when the sound from an audio system (amplifier) is used. Video1 input terminal Video2 input terminal Video4 input terminal Connect this terminal to the component video output terminal, S-video output terminal, or video output terminal of your VCR or DVD, etc. Video5 input terminal Video6 input terminal Connect this terminal to the component video output terminal of your DVD, etc. RGB1 input terminal Connect this terminal to the monitor (DVI-D) output terminal of your PC. RGB2 input terminal Connect this terminal to the monitor (mD-sub) output terminal of your PC. Display output terminals (Picture/Audio) Connect these terminals to the picture input terminal and audio input terminals on the display. Power input terminal Connect this terminal to the power cable supplied with the display.
- 39 -
Model : P42HHS10E
SELECTOR SECTION REAR
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
AUDIO OUTPUT
PICTURE INPUT COMPONENT VIDEO
Y
VIDEO5 COMPONENT VIDEO
VIDEO1 mD-sub
RGB2
PB/CB
PR/CR RGB1 DVI
Y
PB/CB
PR/CR PICTURE AUDIO
DISPLAY OUTPUT
Audio input terminals Input audio through the terminals corresponding to the used video input terminals. * The digital input terminals can be matched as desired with the remote control. Audio output terminals For use when the sound from an audio system (amplifier) is used. Video1 input terminal Video2 input terminal Video4 input terminal Connect this terminal to the SCART terminal of your VCR or DVD, etc. Video5 input terminal Video6 input terminal Connect this terminal to the component video output terminal of your DVD, etc. RGB1 input terminal Connect this terminal to the monitor (DVI-D) output terminal of your PC. RGB2 input terminal Connect this terminal to the monitor (mD-sub) output terminal of your PC. Display output terminals (Picture/Audio) Connect these terminals to the picture input terminal and audio input terminals on the display. Power input terminal Connect this terminal to the power cable supplied with the display.
- 40 -
Model : P42HHS10W/E
REMOTE CONTROL
button Switches between power ON and standby state. DISPLA OFF button Y For showing on-screen-information. PICTURE MODE button Switches the picture mode. AUDIO IN button Selects the input audio. Video input mode selector button [VIDEO 1 - 6] Selects VIDEO 1 - 6 RGB input mode selector button [RGB 1 - 3] Selects RGB 1 - 3. Menu button [MENU] Use this button to display a desired menu for adjusting the picture. Enter button [ENTER] Press this button to finalize the selection of a desired menu or option within a menu.
STILL button Displays a still picture during viewing. MUTE button Temporarily mutes the sound. PICTURE MEMORY button Recalls the PICTURE MEMORY. WIDE button Switches the screen over to a desired wide screen. OFF-TIMER Sets when the power should be turned of f. Volume adjustment buttons [VOL +/- ] Adjust the volume. Press the + button to increase the volume. Press the - button to reduce the volume. Adjustment buttons [ / / / ]
Use these buttons to scroll through options in a menu.
- 41 -
Model : P42HHA10W/E
REMOTE CONTROL
button Switches between power ON and standby state. DISPLA OFF button Y For showing on-screen-information. PICTURE MODE button Switches the picture mode. RGB input mode selector button [RGB 1 - 2] Selects RGB 1 - 2. Video input mode selector button [VIDEO 1 - 3] Selects VIDEO 1 - 3. Menu button [MENU] Use this button to display a desired menu for adjusting the picture. Enter button [ENTER] Press this button to finalize the selection of a desired menu or option within a menu.
MUTE button Temporarily mutes the sound. PICTURE MEMORY button Recalls the PICTURE MEMORY. WIDE button Switches the screen over to a desired wide screen. RGB3/VIDEO4 input mode selector button [RGB3/VIDEO4] Selects RGB3 or VIDEO4. Volume adjustment buttons [VOL +/ - ] Adjust the volume. Press the + button to increase the volume. Press the - button to reduce the volume. Adjustment buttons [ / / / ]
Use these buttons to scroll through options in a menu.
- 42 -
VIDEO MODE ADJUSTMENT Model : P42HHS10W/E
REMOTE CONTROLLER Position Horizontal "-" MENU VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 VIDEO 6 RGB 1 RGB 2 RGB 3 VOL. + VOL. STILL MUTE Noise Reduction DISPLAY PICTURE MODE Dynamic Fine Real 1 Real 2 Static Load Save Memory 1 Memory 2 Memory 3 Memory 4 Memory 5 Memory 6 Memory 7 Memory 8 POSITION/SIZE Off Min. Std. Max. Load Save Memory 1 Memory 2 Memory 3 Memory 4 Memory 5 Memory 6 Memory 7 Memory 8 Size {-30 to +30 (Comp. video -16 to +16)} {-7 to +7 (Zoom -15 to +15) (Comp. video -16 to +16)} {-3 to +12 (Comp. video -2 to +16)} {-3 to +12 (Comp. video -2 to +16)} Vertical "+" Precision Setting ENTER PICTURE Contrast Brightness Color Tint Sharpness Picture Mode {-30 to +30} {-60 to +60} {-60 to +60} {-30 to +30} {-16 to +16} Dynamic Fine Real 1 Real 2 Static Luminance Black Level Colour Temp. User Color Temp. {40 to 100%} {-15 to +15} Horizontal "+"
}
Can be set when Fine is selected as the Picture Mode. Vertical "-" {0 to 255} {0 to 255} {0 to 255}
{-3500 to +3500} Red Green Blue
Picture Memory
PICTURE MEMORY
Default Position Size Default AUDIO Treble Bass Balance Loudness
Yes No Horizontal Vertical Width Height Yes No {-6 to +6} {-6 to +6} {-10 to +10} Off Min. Mid. Max. Clamp Position* 24 Frame Mode Jaggies Filter {-8 to +8} *Only Comp. Video On Off On Off On(OSD : bright) On(OSD : dark) Off
Width "-"
AUDIO IN
Analog Audio Digital Audio 1 Digital Audio 2 Off 30min. 60min. 90min. 120min. Normal Auto Wide 1 Wide 2 Zoom 1 Zoom 2
OFF-TIMER
Width "+"
WIDE
FEATURES
Adjustment* Function
Height "-"
On Screen Menu
OSD
Height "+" Language Normal English Deutsch ~ Espanol Francais Italiano Portugues Name Select Video
~
<
Video 1 Video 2
Wide 1
Video 3 Video 4 Video 5 Video 6 RGB RGB 1 RGB 2 RGB 3
Video 1 DVD 1 DVD 2 VCR 1 VCR 2 GAME Camcorder STB Satellite Cable TV Video 1 PC 1 PC 2 DVD 1 DVD 2 STB Satellite Cable TV
Wide 2
Input Terminal
Zoom 1
Video Input 1 Video Input 2 Video Input 3 Video Input 4
Video input
Auto Video S-video Comp. video Auto 1 Auto 2 NTSC PAL SECAM PAL60 N-PAL M-PAL 4.43NTSC
Video Format
Zoom 2
DVI Input Others Power saver
DVI 1 DVI 2 Auto Off - UNTOUCH Auto Off - NO SIG. Off On Off On
White Screen Exhibition Mode Illumination Information
On Off On Off On Off Mode Freq. Scan Mode Input Signal Freq.
FACTORY DEFAULT
Execute
Yes No
- 43 -
VIDEO MODE ADJUSTMENT Model : P42HHA10W/E
REMOTE CONTROLLER Position Horizontal "-" MENU VIDEO 1 VIDEO 2 VIDEO 3 RGB 1 RGB 2 RGB 3 / VIDEO 4 VOL. + VOL. Precision Setting MUTE Black Level DISPLAY PICTURE MODE Dynamic Fine Real 1 Real 2 Static Noise Reduction PICTURE MEMORY Load Save Memory 1 Memory 2 Memory 3 Memory 4 Memory 5 Memory 6 Memory 7 Memory 8 Colour Temp. User Color Temp. {-3500 to +3500} Red Green Blue {0 to 255} {0 to 255} {0 to 255} {-15 to +15} Luminance {40 to 100%} ENTER PICTURE Contrast Brightness Color Tint Sharpness Picture Mode {-30 to +30} {-60 to +60} {-60 to +60} {-30 to +30 (Comp. video -60 to +60)} {-16 to +16} Dynamic Fine Real 1 Real 2 Static Horizontal "+"
}
Can be set when Fine is selected as the Picture Mode. Vertical "-"
Off Min. Std. Max. Load Save Memory 1 Memory 2 Memory 3 Memory 4 Memory 5 Memory 6 Memory 7 Memory 8 Size {-30 to +30 (Comp. video -16 to +16)} {-7 to +7 (Zoom -15 to +15) (Comp. video -16 to +16)} {-3 to +12 (Comp. video -2 to +16)} {-3 to +12 (Comp. video -2 to +16)} Vertical "+"
Picture Memory
WIDE
Normal Auto Wide 1 Wide 2 Zoom 1 Zoom 2 POSITION/SIZE
Default Position Size Default AUDIO Treble Bass Balance Loudness FEATURES Adjustment* Function On Screen Menu
Yes No Horizontal Vertical Width Height Yes No {-6 to +6} {-6 to +6} {-10 to +10} On Off Clamp Position* 24 Frame Mode OSD {-8 to +8} *Only Comp. Video On Off On(OSD : bright) On(OSD : dark) Off English Deutsch ~ Espanol Francais Italiano Portugues
~
Width "-"
Width "+"
Height "-"
Language
Height "+"
<
Normal Name Select
RGB 1 RGB 2
RGB 1 PC 1 PC 2 DVD 1 DVD 2 STB Satellite Cable TV Video 1 DVD 1 DVD 2 VCR 1 VCR 2 GAME Camcorder STB Satellite Cable TV
Wide 1
Video 1 Video 2 Video 3 Video 4
Mask Off
Wide 2 Input Terminal Video Input S-video Input Auto 1 Auto 2 NTSC PAL SECAM PAL60 N-PAL M-PAL 4.43NTSC RGB-PC Decoder
Mask 5
Zoom 1
D-SUB Input
Mask
Zoom 2
Off 5 10 15
Mask 10
DVI Input Others Audio Input
DVI 1 DVI 2 RGB 1 RGB 2 Video 1 Video 2 Video 3 Video 4 No Audio Audio 1 Audio 2 Audio 3
Mask 15
White Screen Exhibition Mode Information
On Off On Off Mode Freq. Scan Mode Input Signal Freq.
FACTORY DEFAULT
Execute
Yes No
- 44 -
RGB MODE ADJUSTMENT Model : P42HHS10W/E
REMOTE CONTROLLER Size Width "-" MENU VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 VIDEO 6 RGB 1 RGB 2 RGB 3 VOL. + VOL. STILL MUTE Picture Memory DISPLAY Save PICTURE MODE Dynamic Fine Real 1 Real 2 Static Load Save Memory 1 Memory 2 Memory 3 Memory 4 Memory 5 Memory 6 Memory 7 Memory 8 Default POSITION/SIZE Position Size Default AUDIO OFF-TIMER Off 30min. 60min. 90min. 120min. Normal Wide Zoom FEATURES Adjustment Treble Bass Balance Loudness Yes No Horizontal Vertical Width Height Yes No {-6 to +6} {-6 to +6} {-10 to +10} Off Min. Mid. Max. Dot Clock Clock Phase Clamp Position Auto Calibration On Screen Menu OSD {-60 to +60} Auto Manual {-8 to +8} Execute On(OSD : bright) On(OSD : dark) Off English Deutsch ~ Espanol Francais Italiano Portugues
~
PICTURE
Contrast Brightness Color Tint Sharpness Picture Mode
{-30 to +30} {-60 to +60} {-60 to +60} {-60 to +60} {-4 to +4} Dynamic Fine Real 1 Real 2 Static Luminance Black Level Color Temp. User Colour Temp. {40 to 100%} {-15 to +15} Width "+"
ENTER
Precision Setting
}
Can be set when Fine is selected as the Picture Mode. Height "-" {0 to 255} {0 to 255} {0 to 255}
{-3500 to +3500} Red Green Blue Memory 1 Memory 2 Memory 3 Memory 4 Memory 5 Memory 6 Memory 7 Memory 8
Load
Height "+"
PICTURE MEMORY
{-150 to +150} {-150 to +150} {-12 to +25} {-12 to +25}
AUDIO IN
Analog Audio Digital Audio 1 Digital Audio 2
WIDE
Moving Area Std. (10 dot)
{1 to 32}
Yes No
Moving Area Max. (15 dot)
Language Moving Area Min. (5 dot)
Normal Name Select
<
Video
Video 1 Video 2 Video 3 Video 4
Wide Video 5 Video 6 RGB RGB 1 RGB 2 RGB 3
Zoom
Video 1 DVD 1 DVD 2 VCR 1 VCR 2 GAME Camcorder STB Satellite Cable TV Video 1 PC 1 PC 2 DVD 1 DVD 2 STB Satellite Cable TV
Input Terminal
Video Input 1 Video Input 2 Video Input 3 Video Input 4
Video input
Auto Video S-video Comp. video Auto 1 Auto 2 NTSC PAL SECAM PAL60 N-PAL M-PAL 4.43NTSC
Video Format
Position
Horizontal "-"
DVI Input Horizontal "+" Others Power saver
DVI 1 DVI 2 Auto Off - UNTOUCH Auto Off - NO SIG. DPMS Off On Off On Time Off 1 min. 15 min. 45 min. 60 min. Black White White Screen Exhibition Mode Illumination Information On Off On Off On Off Mode Freq. Scan Mode Input Sync Freq. Preset No.
Vertical "-" Background Screen Orbiter Mode / Time Off Time Mode Min. Std. Max.
Moving Area Vertical "+" Direct Setting Auto VGA WVGA 480P XGA WXGA Auto Manual
Code Setting
{00 to 1F} *Hexadecimal
FACTORY DEFAULT
Execute
Yes No
- 45 -
RGB MODE ADJUSTMENT Model : P42HHA10W/E
REMOTE CONTROLLER Size Width "-" MENU VIDEO 1 VIDEO 2 VIDEO 3 RGB 1 RGB 2 RGB 3 / VIDEO 4 VOL. + VOL. Precision Setting MUTE Black Level DISPLAY PICTURE MODE Dynamic Fine Real 1 Real 2 Static Picture Memory PICTURE MEMORY Load Save Memory 1 Memory 2 Memory 3 Memory 4 Memory 5 Memory 6 Memory 7 Memory 8 Default WIDE Normal Wide Zoom POSITION/SIZE Position Size Default AUDIO Treble Bass Balance Loudness FEATURES Adjustment Color Temp. User Color Temp. {-3500 to +3500} Red Green Blue Memory 1 Memory 2 Memory 3 Memory 4 Memory 5 Memory 6 Memory 7 Memory 8 {0 to 255} {0 to 255} {0 to 255} {-15 to +15} Luminance {40 to 100%} ENTER PICTURE Contrast Brightness Color Tint Sharpness Picture Mode {-30 to +30} {-60 to +60} {-60 to +60} {-60 to +60} {-4 to +4} Dynamic Fine Real 1 Real 2 Static Width "+"
}
Can be set when Fine is selected as the Picture Mode. Height "-"
Load Save
Height "+"
Yes No Horizontal Vertical Width Height Yes No {-6 to +6} {-6 to +6} {-10 to +10} On Off Dot Clock Clock Phase Clamp Position Auto Calibration {-60 to +60} Auto Manual {-8 to +8} Execute On(OSD : bright) On(OSD : dark) Off English Deutsch ~ Espanol Francais Italiano Portugues
~
{-150 to +150} {-150 to +150} {-12 to +25} {-12 to +25}
Moving Area Std. (10 dot)
{1 to 32}
Moving Area Max. (15 dot)
Yes No
On Screen Menu
OSD
Moving Area Min. (5 dot)
Language
<
Normal Name Select RGB 1 RGB 2 RGB 1 PC 1 PC 2 DVD 1 DVD 2 STB Satellite Cable TV Video 1 DVD 1 DVD 2 VCR 1 VCR 2 GAME Camcorder STB Satellite Cable TV
Mask Off
Wide
Video 1 Video 2 Video 3 Video 4
Mask 5
Zoom
Input Terminal
Video Input S-video Input
Position
Horizontal "-" D-SUB Input
Auto 1 Auto 2 NTSC PAL SECAM PAL60 N-PAL M-PAL 4.43NTSC RGB-PC Decoder Mask Off 5 10 15
Mask 10
Mask 15
DVI Input Horizontal "+" Others DPMS
DVI 1 DVI 2 Time Off 1 min. 15 min. 45 min. 60 min. Black White No Audio Audio 1 Audio 2 Audio 3 Code Setting White Screen Exhibition Mode
Direct Setting
Background Audio Input Vertical "-" RGB 2 Video 1 Video 2 Video 3 Video 4 Screen Orbiter Vertical "+" Moving Area Mode / Time RGB 1
Auto VGA WVGA 480P XGA WXGA SXGA SXGA+ Auto Manual On Off On Off Mode Freq. Scan Mode Input Sync Freq. Preset No. {00 to 27} *Hexadecimal
Off Time Mode Min. Std. Max.
Information
FACTORY DEFAULT
Execute
Yes No
- 46 -
TROUBLESHOOTING USING LED AND OSD
1. Display
(1) OSD Three kinds of error messages are displayed on the screen, and the power is turned off 10 sec later. (2) LED LED error is displayed continuously after the power is turned off.
2. Error types and check points
(1) OSD
On screen display ERROR MESSAGE CONDITION 1
ERROR MESSAGE CONDITION 2
Cause Fan protector operated
Temperature protector operated
Check point
Fan (Display unit) Main power PCB (Display unit) Main PCB (Display unit) Ambient temperature of unit Main PCB (Display unit) Temp. sensor IC757 (Display unit) Main PCB (Display unit) Main(Digital/Video) PCB (Selector unit)
ERROR MESSAGE CONDITION 3
EEPROM error
(2) LED Display
LED lamp display status
Steady light (Red) Continuous Flashes continuously (Red)
Cause Stand-by status No power
Power supply protector operated Fan protector operated
Check point
Main power PCB PDP panel
1 time Flashes once every 4 sec. (Red) 2 times Flashes twice every 5 sec. (Red)
Temperature protector operated
PDP panel AC error EEPROM error 3 times Flashes three times every 6 sec. (Red) Audio circuit faulty 5 times Flashes five times every 8 sec. (Red) Selector unit
Fan Main power PCB Main PCB Ambient temperature of unit Temperature sensor IC757 Main PCB Panel AC Main PCB Audio PCB Assy
LED lamp display status Steady light (Red) Continuous Flashes continuously (Red)
Cause Stand-by status No power
Power supply protector operated
Check point
Main power PCB
EEPROM error 3 times Flashes three times every 6 sec. (Red) Main(Digital) circuit faulty 4 times Flashes four times every 7 sec. (Red) Audio circuit faulty 5 times Flashes five times every 8 sec. (Red)
Main(Digital/Video) PCB Main(Digital) PCB Audio PCB Assy
- 47 -
Model : P42HHA10W/E
1. Display
(1) OSD Three kinds of error messages are displayed on the screen, and the power is turned off 10 sec later. (2) LED LED error is displayed continuously after the power is turned off.
2. Error types and check points
(1) OSD
On screen display
ERROR MESSAGE CONDITION 1
Cause Fan protector operated
Temperature protector operated
Check point
Fan Main power PCB Main/Digital PCB Ambient temperature of unit Main/Digital PCB Temp. sensor IC757
ERROR MESSAGE CONDITION 2
(2) LED
LED lamp display status
Steady light (Red) Continuous Flashes continuously (Red)
Cause Stand-by status No power
Power supply protector operated Fan protector operated
Check point
Main power PCB PDP panel
1 time Flashes once every 4 sec. (Red) 2 times Flashes twice every 5 sec. (Red)
Temperature protector operated
Fan Main power PCB Main/Digital PCB Ambient temperature of unit Temperature sensor IC757 Main/Digital PCB Main/Digital PCB Video PCB Assy
4 times Flashes four times every 7 sec. (Red) 5 times Flashes five times every 8 sec. (Red)
Main/Digital circuit faulty Video circuit faulty
- 48 -
TROUBLESHOOTING FLOWCHART Model : P42HHS10W/E
LED lamp blinking
Note : 1. Since a voltage is applied to the Main Power PCB heat sinks while the set is operating, do not touch the heat sinks.
Display unit Turn power on and check state of lamp. LAMP STATE Not lighted. POWER SUPPLY STATE Power supply circuit faulty. REMEDY Replace Main Power PCB. Vs and Va must be adjusted. RED
Blinks Blinks continuously. continuously.
Power turned off immediately. Power turned off after 10 sec. Power turned off after 10 sec. Power not turned off, LED blinks only.
Check 1
RED
Blinks once
Check 2
RED
Blinks twice
Check 3
RED
Blinks three times
Replace Main PCB Assy.
RED
Blinks five times
Power not turned off, LED blinks only.
Replace Audio PCB Assy.
GREEN
Lights steadily for more than 10 sec.
Replace selector unit and operates OK?
NO
Replace Main(Digital) PCB Assy.
YES
Check selector unit
- 49 -
Model : P-SU4H10W/E
LED lamp blinking
Selector unit Turn power on and check state of lamp. LAMP STATE Not lighted.
Note : 1. Since a voltage is applied to the Main Power PCB heat sinks while the set is operating, do not touch the heat sinks.
POWER SUPPLY STATE Power supply circuit faulty.
REMEDY Replace Main Power PCB. Vs and Va must be adjusted.
RED
Blinks Blinks continuously. continuously.
Power turned off immediately.
Check 1 4
RED
Blinks three times
Power not turned off, LED blinks only. Power not turned off, LED blinks only. Power not turned off, LED blinks only.
Replace Main(Digital) PCB Assy. Replace Main(Digital) PCB Assy. Replace Main(Video) PCB Assy.
RED
Blinks four times
RED GREEN
Blinks five times Lights steadily for more than 10 sec. Replace display unit and operates OK?
YES
Check display unit
Is on-screen display normal? YES
NO
Check 5
All input image faulty. Video input image faulty. S-video input image faulty. Component video input image faulty. RGB input image faulty.
Signal processing PCB faulty.
Check 6
Replace Main(Digital) PCB Assy.
Check 6
Check 7
Check 8
- 50 -
Model : P42HHS10W/E
Check 1
Start Power supply protector operated
Power lamp : Flashing continuously in red. (at an interval of 1 sec.)
(1) Pull out Power Cord Plug and disconnect connectors CN6, CN23, CN33, CN42 and CN52 on Main Power PCB. (2) Connect pin 1 and pin 13 of CN352 through a 1/4W, 1K resistor. Connect pin 1 of CN352 and pin 5 of CN309 through a 1/4W, 1K resistor. CN502 shorted. (3) Plug in Power Cord Plug and turn on power switch.
Does lamp change to green? No
Yes PDP faulty. Replace PDP. Vs and Va must be adjusted.
(1) Pull out Power Cord Plug and disconnect connectors CN351 and CN352 on Main Power PCB. (2) Connect pin 1 and pin 13 of CN352 through a 1/4W, 1K resistor. Connect pin 1 of CN352 and pin 5 of CN309 through a 1/4W, 1K resistor. CN502 shorted. (3) Disconnect connectors on Main Power PCB. (CN6, CN23, CN33, CN42, CN52) (4) Plug in Power Cord Plug and turn on power switch.
Is voltage at each connector on Main Power PCB normal? See page **
No
Power Supply circuit faulty.
Replace Main Power PCB. Vs and Va must be adjusted.
Yes
(1) Pull out Power Cord Plug and connect connectors CN351 and CN352 to Main Power PCB. (2) Plug in Power Cord Plug and turn on power switch. (3) Check state of green lamp.
Does lamp change to green? Yes
No Main circuit faulty.
Replace Main PCB Assy.
Main circuit faulty.
Replace Main PCB Assy.
- 51 -
Check 2
Fan protector operated
Check 3
Temperature protector operated
Power lamp: Flashes once intermittently in red. (For 0.5 sec. at an interval of 4 sec.)
Start
Power lamp : Flashes intermittently twice in red. (For 0.5 sec. at an interval of 5 sec.)
Start
Is voltage at connectors CN352 and on Main PCB 14V? No Is ambient temperature of IC757 on Main PCB less than 60 ? No
Adjust PDP unit installation so that peripheral temperature is 40.0 or less.
Yes Yes Power Supply Unit circuit faulty. No Replace Main Power PCB. Vs and Va must be adjusted. Yes No Does unit operate normally when temperature sensor IC757 changed ?
Microcomputer peripheral circuit faulty.
Replace Main PCB Assy.
- 52 -
Is voltage at connectors CN953,
CN954 on Main PCB normal?
+
and -
of CN953, 954
Microcomputer peripheral circuit faulty.
Replace Main PCB Assy.
Temperature sensor IC757 faulty.
Replace temperature sensor IC757.
5V to 11V.
Yes
Is fan rotary signal of Main PCB normal ? No Fan faulty
Pin of CN953, CN954 16 to 90 Hz.
Replace fan.
Yes
Microcomputer peripheral circuit faulty.
Replace Main PCB Assy.
Check 4
Start
Power supply protector operated
Power lamp : Flashing continuously in red. (at an interval of 1 sec.)
(1) Pull out Power Cord Plug and disconnect connectors CN202, CN203, CN204 on Main Power PCB. (2) Plug in Power Cord Plug and turn on power switch.
Is voltage at each connector on Main Power PCB normal? See page **
No
Power Supply circuit faulty.
Replace Main Power PCB. Vs and Va must be adjusted.
Yes
(1) Pull out Power Cord Plug and connect connectors CN202, CN203, CN204 to Main Power PCB. (2) Pull out Power Cord Plug and disconnect connectors CN4101, CN4155 on Audio-selector PCB (3) Plug in Power Cord Plug and turn on power switch. (4) Check state of green lamp.
Does lamp change to green? Yes
No Main circuit faulty.
Replace Main PCB Assy.
Audio-selector circuit faulty.
Replace Audioselector PCB Assy.
- 53 -
Check 5
Start
OSD is not displayed
Power lamp : Lighted green. (10 sec or more)
Is picture displayed on-screen when signal input?
Yes
Signal processing circuit faulty
Replace Main PCB Assy
No
Is voltage at each connector on Power PCB Normal?
No
Power Supply circuit faulty
Replace Power PCB Assy
Yes Signal processing circuit faulty Replace Main PCB Assy
- 54 -
Check 6
Start
Video/S-video input signal are abnormal.
Power lamp : Lighted green (10 sec or more)
Does mode selection operate? (VIDEO1-6/RGB1-3)
No
Microcomputer peripheral circuit faulty
Replace Main PCB Assy
Yes
(1) Make sure connectors CN3402-CN1101 are properly inserted. (2) Make sure PCBs M02CZ and M02GL(M02GM) are correctly connected. (3) Is signal at connector CN3402 -Video, -Y/ -pin C(CN1101 -Video,
-Y/
-C) correct?
Is signal of connector CN3402(CN1101) correct?
No
Selector circuit faulty
Replace Terminal PCB
Yes
Video circuit faulty
Replace Main(Video) PCB Assy
- 55 -
Check 7
Start
Component input signal are abnormal.
Power lamp : Lighted green (10 sec or more)
Does mode selection operate?(VIDEO1-6/RGB1-3)
No
Microcomputer peripheral circuit faulty
Replace Main(Digital) PCB Assy
Yes
(1) Make sure PCBs M02CZ and M02GL(M02GM) are correctly connected.
Only VIDEO 1/2/4 abnormal?
Yes
Selector circuit faulty
Replace Terminal PCB
No Only VIDEO 5/6(RGB2/3) abnormal? Yes Selector circuit faulty Replace Video selector PCB
No Is 525i/625i signal correctly displayed? No Is signal input level normally? No Yes Signal processing circuit faulty Replace Main(Video) PCB Assy Yes Signal processing circuit faulty Replace Main(Video) PCB Assy
Check input signal
SYNC signals are added to the Y signal.
- 56 -
Model : P42