Text preview for : SONY HDR-HC3, HCE3, HC3K, HC3EK, SERVICE MANUAL LEVEL 2 VER 1.1 2006.07 (9-876-939-32).pdf part of SONY HDR-HC3 SONY HDR-HC3, HCE3, HC3K, HC3EK.
DIGITAL HD VIDEO CAMERA RECORDER.
SERVICE MANUAL VERSION 1.1 2006.07
PART#(9-876-939-32).
Back to : SONY HDR-HC3, HCE3, HC3K, | Home
HDR-HC3/HC3E/HC3K/HC3EK RMT-831
SERVICE MANUAL LEVEL 2
US Model
Ver 1.1 2006.07 Canadian Model
Revision History AEP Model
UK Model
North European Model
How to use E Model
Acrobat Reader
Australian Model
Chinese Model
Hong Kong Model
Korea Model
Tourist Model
Japanese Model
N MECHANISM (MDX-N110) Photo: HDR-HC3/Black
Link
SPECIFICATIONS DISASSEMBLY SCHEMATIC DIAGRAMS
MODEL INFORMATION TABLE BLOCK DIAGRAMS PRINTED WIRING BOARDS
SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REPAIR PARTS LIST
The components identified by Les composants identifiés par une
mark 0 or dotted line with marque 0 sont critiques pour la
mark 0 are critical for safety. sécurité.
Replace only with part num- Ne les remplacer que par une pièce
ber specified. portant le numéro spécifié.
DIGITAL HD VIDEO CAMERA RECORDER
2006G0500-1
HDR-HC3/HC3E/HC3K/HC3EK_L2 © 2006.7
9-876-939-31 Sony EMCS Co. Published by Kohda TEC
These specifications are extracted
from instruction manual of HDR-HC3.
ENGLISH JAPANESE
SPECIFICATIONS
System Color temperature Operating temperature
[AUTO], [ONE PUSH], [INDOOR] 0 °C to + 40 °C (32 °F to 104 °F)
Video recording system (HDV)
(3 200 K), Storage temperature
2 rotary heads, Helical scanning system
[OUTDOOR] (5 800 K) -20 °C to + 60 °C (-4 °F to + 140 °F)
Video recording system (DV)
Minimum illumination Dimensions (approx.)
2 rotary heads, Helical scanning system
Still image recording system
5 1x (lux) (F 1.8) 82 × 78 × 139 mm
0 lx (lux) (during NightShot function) (3 1/4 × 3 1/8 × 5 1/2 in.) (w/h/d)
Exif Ver. 2.2*1
Audio recording system (HDV) *1 "Exif" is a file format for still images, excluding the projecting parts
Rotary heads, MPEG-1 Audio Layer -2, established by the JEITA (Japan Mass (approx.)
Quantization: 16 bits (Fs 48 kHz, Electronics and Information Technology 500 g (1 lb 1 oz) main unit only
stereo) Industries Association). Files in this 600 g (1 lb 5 oz) including the NP-FP60
transfer rate: 384 kbps format can have additional information rechargeable battery pack and DVM60
such as your camcorder's setting cassette.
Audio recording system (DV)
information at the time of recording. Supplied accessories
Rotary heads, PCM system
*2 The focal length figures are actual AC Adaptor (1)
Quantization: 12 bits (Fs 32 kHz, stereo
figures resulting from wide angle pixel Power cord (1)
1, stereo 2), 16 bits (Fs 48 kHz, stereo)
read-out. Wireless Remote Commander (1)
Video signal A/V connecting cable (1)
NTSC color, EIA standards Output connectors
Component video cable (1)
1080/60i specification Audio/Video output USB cable (1)
Usable cassette 10-pin connector Rechargeable battery pack NP-FP60 (1)
Mini DV cassette with the mark Video signal: 1 Vp-p, 75 (ohms), Battery terminal cover (1)
unbalanced Operating Guide (1)
printed
See page 5-36.
Tape speed (HDV) Luminance signal: 1 Vp-p, 75
Approx. 18.81 mm/s (ohms), unbalanced AC Adaptor AC-L200
Tape speed (DV) Chrominance signal: 0.286 Vp-p, 75
Power requirements
SP: Approx. 18.81 mm/s (ohms), unbalanced
AC 100 - 240 V, 50/60 Hz
LP: Approx. 12.56 mm/s Audio signal: 327 mV (at load
Current consumption
Recording/playback time (HDV) impedance 47 k (kilohms)), Output
0.35 - 0.18 A
60 min (using a DVM60 cassette) impedance with less than 2.2 k
Power consumption
Recording/playback time (DV) (kilohms)
18 W
SP: 60 min (using a DVM60 cassette) COMPONENT OUT jack
Output voltage
LP: 90 min (using a DVM60 cassette) Y: 1 Vp-p, 75 (ohms), unbalanced PB/
DC 8.4 V*
Fast forward/rewind time PR, CB/CR: +/- 350 mVp-p
Operating temperature
Approx. 2 min 40 s (using a DVM60 HDMI OUT jack
0 °C to + 40 °C (32 °F to 104 °F)
cassette and rechargeable battery pack) TypeA (19-pin)
Storage temperature
Approx. 1 min 45 s (using a DVM60
Input/Output connectors -20 °C to + 60 °C (-4 °F to + 140 °F)
cassette and AC Adaptor)
Dimensions (approx.)
Viewfinder LANC jack
48 × 29 × 81 mm (1 15/16 × 1 3/16 ×
Electric viewfinder (color) Stereo mini-minijack (Ø 2.5 mm)
3 1/4 in.) (w/h/d) excluding the
Image device USB jack
projecting parts
5.9 mm (1/3 type) CMOS sensor mini-B
Mass (approx.)
Gross: Approx. 2 103 000 pixels HDV/DV jack
170 g (6.0 oz) excluding the power cord
Effective (movie, 4:3): i.LINK Interface (IEEE 1394, 4-pin
1 076 000 pixels connector S100) * See the label on the AC Adaptor for other
specifications.
Effective (movie, 16:9):
1 434 000 pixels LCD screen
Rechargeable battery pack (NP-FP60)
Effective (still, 4:3): Picture
6.9 cm (2.7 type, aspect ratio 16:9) Maximum output voltage
1 991 000 pixels
Total dot number DC 8.4 V
Effective (still, 16:9):
211 200 (960 × 220) Output voltage
1 493 000 pixels
DC 7.2 V
Lens General Capacity
Carl Zeiss Vario-Sonnar T
Power requirements 7.2 Wh (1 000 mAh)
10 × (Optical), 20 ×, 80 × (Digital)
DC 7.2 V (battery pack) Dimensions (approx.)
Focal length
DC 8.4 V (AC Adaptor) 31.8 × 33.3 × 45.0 mm
f=5.1 ~ 51 mm (7/32 ~ 2 1/8 in.)
Average power consumption (1 5/16 × 1 5/16 × 1 13/16 in.) (w/h/d)
When converted to a 35 mm still
During camera recording using the Mass (approx.)
camera
viewfinder with normal brightness: 80 g (2.9 oz)
In CAMERA-TAPE *2 : 41.3 ~ 485 mm
HDV recording 4.1 W Operating temperature
(1 11/16 ~ 19 1/8 in.) (16:9), 50.5 ~ 594
DV recording 3.9 W 0 °C to + 40 °C (32 °F to 104 °F)
mm (2 ~ 23 1/2 in.) (4:3)
During camera recording using the Type
In CAMERA-MEMORY: 37 ~ 370 mm
LCD with normal brightness: Lithium ion
(1 1/2 ~ 14 5/8 in.) (4:3), 40.4 ~ 404
HDV recording 4.4 W
mm (1 5/8 ~ 16 in.) (16:9) Design and specifications are subject to change
DV recording 4.2 W without notice.
F1.8 ~ 2.9
Filter diameter: 30 mm (1 3/16 in.)
HDR-HC3/HC3E/HC3K/HC3EK_L2
--2--
ENGLISH JAPANESE
AC AC-L200
2 A/V OUT 10 AC100 240V 50/60Hz
HDV 1 Vp-p 75 18W
2 Y 1Vp-p 75
C 0.286Vp-p 75 DC8.4V *
DV
Exif Ver.2.2* 1 0 +40
327mV 47 k
2.2 k 20 +60
D1/D3 48 29 81mm
HDV MPEG-1 Audio Layer2
16 48kHz Y 1Vp-p 75 170g
384kbps PB/PR. CB/CR 350mVp-p
HDMI OUT * AC
A 19
DV 12 32kHz
1 2
16 48kHz / NP-FP60
NTSC EIA
1080/60i LANC DC8.4V
ø 2.5
DV DC7.2V
USB mini-B
7.2Wh 1 000mAh
18.81mm/ HDV/DV i.LINK IEEE1394 4
S100 31.8 33.3 45.0mm
HDV
SP 18.81mm/
80g
DV LP 12.56mm/
6.9cm 2.7 0 +40
/ 60 DVM60
HDV 16:9 Li-ion
/ SP 60 DVM60 211 200
DV LP 90 DVM60 960 220
2 40 DVM60
AC 7.2V
1 45 DVM60 DC 8.4V
5.9mm 1/3 CMOS
210 HDV 4.1W
4 3 DV 3.9W
108
16 9 HDV 4.4W
143 DV 4.2W
4 3 0 +40
199
16 9 20 +60
149 82 78 139mm
T
500g
10 20 80
600g NP-FP60
f=5.1 51mm DVM60
35mm AC
*2
41.3 485mm 16:9
4:3 50.5 594mm
AV
37 370mm 4:3
D
16:9 40.4
404 USB
F1.8 2.9
30mm NP-FP60
3 200K
5 800K
11 lx F1.8
0 lx NightShot
*1 JEITA
*2
HDR-HC3/HC3E/HC3K/HC3EK_L2
--3--
Model information table
Model HDR-HC3 HDR-HC3E HDR-HC3K HDR-HC3EK
AEP, UK, NE, E, AUS,
Destination US, CND, E, KR, J JE JE
CH, HK
Color system NTSC PAL NTSC PAL
· Abbreviation
AR : Argentine model
AUS : Australian model
BR : Brazilian model
CH : Chinese model
CND : Canadian model
EE : East European model
HK : Hong Kong model
J : Japanese model
JE : Tourist model
KR : Korea model
NE : North European model
HDR-HC3/HC3E/HC3K/HC3EK_L2
--4--
ENGLISH JAPANESE
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered Unleaded solder
connections. Check the entire board surface for solder splashes Boards requiring use of unleaded solder are printed with the lead-
and bridges. free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
2. Check the interboard wiring to ensure that no wires are
the lead free mark due to their particular size.)
"pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly
: LEAD FREE MARK
transistors, that were installed during a previous repair. Point
Unleaded solder has the following characteristics.
them out to the customer and recommend their replacement. · Unleaded solder melts at a temperature about 40°C higher than
4. Look for parts which, through functioning, show obvious signs ordinary solder.
of deterioration. Point them out to the customer and Ordinary soldering irons can be used but the iron tip has to be
recommend their replacement. applied to the solder joint for a slightly longer time.
5. Check the B+ voltage to see it is at the values specified. Soldering irons using a temperature regulator should be set to
6. Flexible Circuit Board Repairing about 350°C.
· Keep the temperature of the soldering iron around 270°C Caution: The printed pattern (copper foil) may peel away if the
during repairing. heated tip is applied for too long, so be careful!
· Strong viscosity
· Do not touch the soldering iron on the same conductor of the
Unleaded solder is more viscous (sticky, less prone to flow) than
circuit board (within 3 times). ordinary solder so use caution not to let solder bridges occur such
· Be careful not to apply force on the conductor when soldering as on IC pins, etc.
or unsoldering. · Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
HDR-HC3/HC3E/HC3K/HC3EK_L2
--5--
ENGLISH JAPANESE
1. 6.
· 270
·
·
2. 7.
Lead
Free
0
3.
· 40
4. 350
·
5. IC
·
· ·
HDR-HC3/HC3E/HC3K/HC3EK_L2
--6--
TABLE OF CONTENTS
Section Title Page
1. SERVICE NOTE
1-1. Power Supply During Repairs ········································· 1-1
1-2. To Take Out a Cassette when not Eject (Force Eject) ····· 1-1
1-3. Setting the "Forced Power On" Mode ····························· 1-1
1-4. Using Service Jig ····························································· 1-2
1-5. Self-diagnosis Function ··················································· 1-2
1-6. Process After Fixing Flash Error ····································· 1-4
2. DISASSEMBLY
2-1. Disassembly ····································································· 2-2
3. BLOCK DIAGRAMS
3-1. Overall Block Diagram (1/7) ··········································· 3-1
3-2. Overall Block Diagram (2/7) ··········································· 3-2
3-3. Overall Block Diagram (3/7) ··········································· 3-3
3-4. Overall Block Diagram (4/7) ··········································· 3-4
3-5. Overall Block Diagram (5/7) ··········································· 3-5
3-6. Overall Block Diagram (6/7) ··········································· 3-6
3-7. Overall Block Diagram (7/7) ··········································· 3-7
3-8. Power Block Diagram (1/3) ············································· 3-8
3-9. Power Block Diagram (2/3) ············································· 3-9
3-10. Power Block Diagram (3/3) ··········································· 3-10
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1. Frame Schematic Diagrams ············································· 4-1
4-2. Schematic Diagrams ························································ 4-3
4-3. Printed Wiring Boards ··················································· 4-37
4-4. Mounted Parts Location ················································ 4-56
5. REPAIR PARTS LIST
5-1. Exploded Views ······························································· 5-2
5-2. Electrical Parts List ······················································· 5-16
HDR-HC3/HC3E/HC3K/HC3EK_L2
--7--
1. SERVICE NOTE ENGLISH JAPANESE
1-1. POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so
that the unit cannot operate.
These following method is available to prevent this.
Method:
Use the AC power adaptor (AC-L200).
1-2. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)
1 Refer to "2. DISASSEMBLY" to remove the mechanism deck block.
2 Supply +4.5V from the DC power supply to the loading motor and unload with a pressing the cassette compartment.
Loading motor
DC power supply
(+ 4.5Vdc)
1-3. SETTING THE "FORCED POWER ON" MODE
It is possible to turn on power by adjustment remote commander (RM-95 or NEW LANC JIG).
Operate the VTR function using the adjustment remote commander.
1-3-1. Setting the "Forced Camera Power ON" Mode
1) Select page: 0, address: 01, and set data:01.
2) Select page: A, address: 10, set data:01 and press the "PAUSE (Write) " button of the adjustment remote commander.
1-3-2. Setting the "Forced VTR Power ON" Mode
1) Select page: 0, address: 01, and set data:01.
2) Select page: A, address: 10, set data:02 and press the "PAUSE (Write) " button of the adjustment remote commander.
1-3-3. Exiting the "Forced Power ON" Mode
1) Select page: 0, address: 01, and set data:01.
2) Select page: A, address: 10, set data:00 and press the "PAUSE (Write) " button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
HDR-HC3/HC3E//HC3K/HC3EK_L2
1-1
ENGLISH JAPANESE
1-4. USING SERVICE JIG
Connect the CPC-15 jig connector (J-6082-564-A) and I/F unit for LANC control (J-6082-521 A) to the CN1009 on the VC-441 board.
CPC-15
(J-6082-564-A)
8
1
8 1
CN1009
VC-441 BOARD
(SIDE A) I/F unit for LANC control
(J-6082-521-A)
1-5. SELF-DIAGNOSIS FUNCTION
1-5-1. Self-diagnosis Function 1-5-2. Self-diagnosis Display
When problems occur while the unit is operating, the self-diagnosis When problems occur while the unit is operating, the counter of the
function starts working, and displays on the viewfinder or LCD viewfinder or LCD screen shows a 4-digit display consisting of an
screen what to do. This function consists of two display; self- alphabet and numbers, which blinks at 3.2 Hz. This 5-character
diagnosis display and service mode display. display indicates the "repaired by:", "block" in which the problem
Details of the self-diagnosis functions are provided in the Instruction occurred, and "detailed code" of the problem.
manual.
Viewfinder or LCD screen
C:31:11
Blinks at 3.2Hz
C 31 11
Repaired by: Block Detailed Code
C : Corrected by customer Indicates the appropriate Refer to "1-5-3. Self-diagnosis Code Table".
H : Corrected by dealer step to be taken.
E : Corrected by service E.g.
engineer 31 ....Reload the tape.
32 ....Turn on power again.
HDR-HC3/HC3E/HC3K/HC3EK_L2
1-2
ENGLISH JAPANESE
1-5-3. Self-diagnosis Code Table
Self-diagnosis Code
Repaired by:
Block Detailed Symptom/State Correction
Function Code
C 0 4 0 0 Non-standard battery is used. Use the InfoLITHIUM battery.
C 2 1 0 0 Condensation. Remove the cassette, and insert it again after one hour.
C 2 2 0 0 Video head is dirty. Clean with the optional cleaning cassette.
LOAD direction. Loading does not
C 3 1 1 0 Load the tape again, and perform operations from the beginning.
complete within specified time
UNLOAD direction. Loading does not
C 3 1 1 1 Load the tape again, and perform operations from the beginning.
complete within specified time
C 3 1 2 0 T reel side tape slacking when unloading. Load the tape again, and perform operations from the beginning.
C 3 1 2 1 S reel side tape slacking when unloading. Load the tape again, and perform operations from the beginning.
C 3 1 2 2 T reel fault. Load the tape again, and perform operations from the beginning.
C 3 1 2 3 S reel fault. Load the tape again, and perform operations from the beginning.
C 3 1 3 0 FG fault when starting capstan. Load the tape again, and perform operations from the beginning.
C 3 1 3 1 FG fault during normal capstan operations. Load the tape again, and perform operations from the beginning.
C 3 1 4 0 FG fault when starting drum. Load the tape again, and perform operations from the beginning.
C 3 1 4 1 PG fault when starting drum. Load the tape again, and perform operations from the beginning.
C 3 1 4 2 FG fault during normal drum operations. Load the tape again, and perform operations from the beginning.
C 3 1 4 3 PG fault during normal drum operations. Load the tape again, and perform operations from the beginning.
C 3 1 4 4 Phase fault during normal drum operations. Load the tape again, and perform operations from the beginning.
LOAD direction loading motor time- Remove the battery or power cable, connect, and perform
C 3 2 1 0
out. operations from the beginning.
UNLOAD direction loading motor Remove the battery or power cable, connect, and perform
C 3 2 1 1
time-out. operations from the beginning.
T reel side tape slacking when Remove the battery or power cable, connect, and perform
C 3 2 2 0
unloading. operations from the beginning.
S reel side tape slacking when Remove the battery or power cable, connect, and perform
C 3 2 2 1
unloading. operations from the beginning.
Remove the battery or power cable, connect, and perform
C 3 2 2 2 T reel fault. operations from the beginning.
Remove the battery or power cable, connect, and perform
C 3 2 2 3 S reel fault. operations from the beginning.
Remove the battery or power cable, connect, and perform
C 3 2 3 0 FG fault when starting capstan.
operations from the beginning.
FG fault during normal capstan Remove the battery or power cable, connect, and perform
C 3 2 3 1
operations. operations from the beginning.
Remove the battery or power cable, connect, and perform
C 3 2 4 0 FG fault when starting drum.
operations from the beginning.
Remove the battery or power cable, connect, and perform
C 3 2 4 1 PG fault when starting drum.
operations from the beginning.
FG fault during normal drum Remove the battery or power cable, connect, and perform
C 3 2 4 2
operations. operations from the beginning.
PG fault during normal drum Remove the battery or power cable, connect, and perform
C 3 2 4 3
operations. operations from the beginning.
Phase fault during normal drum Remove the battery or power cable, connect, and perform
C 3 2 4 4
operations. operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Difficult to adjust focus If it does not recover, inspect the focus MR sensor of lens block
C 3 2 6 0
(Cannot initialize focus.) (Pin ql, wa of CN7103 on the LD-202 board).
If not faulty, inspect the focus motor drive circuit
(IC7204 on the LD-202 board).
HDR-HC3/HC3E//HC3K/HC3EK_L2
1-3
ENGLISH JAPANESE
Self-diagnosis Code
Repaired by:
Block Detailed Symptom/State Correction
Function Code
Inspect the zoom MR sensor of lens block (Pin qh, qk of CN7103
Zoom operations fault on the LD-202 board) when zooming is performed when the zoom
E 6 1 1 0
(Cannot initialize zoom lens.) switch is operated and the zoom motor drive circuit (IC7204 on
the LD-202 board) when zooming is not performed.
Focus lens initializing failure and zoom
E 6 1 1 1 lens initializing failure occur simulta- Check both C: 32: 60 and E: 61: 10 of the self-diagnosis code.
neously.
Steadyshot function does not work well.
Inspect pitch angular velocity sensor (SE7702 on the CM-071
E 6 2 0 0 (With pitch angular velocity sensor output
board) peripheral circuits.
stopped.)
Steadyshot function does not work well.
Inspect yaw angular velocity sensor (SE7701 on the CM-071
E 6 2 0 1 (With yaw angular velocity sensor output
board) peripheral circuits.
stopped.)
E 9 1 0 1 Abnormality when flash is being charged. Checking of flash unit or replacement of flash unit. (Note)
Note: After repair, be sure to perform "1-6. PROCESS AFTER FIXING FLASH ERROR".
1-6. PROCESS AFTER FIXING FLASH ERROR
When "FLASH error" (Self-diagnosis Code E:91:**) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is
changed automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Connect the adjustment remote commander (RM-95 or NEW LANC JIG) and perform the
following process.
Order Page Address Data Procedure
1 7 01 75
2 7 00 01 Press PAUSE (Write) button.
3 7 02 Check the data changes to "01".
HDR-HC3/HC3E/HC3K/HC3EK_L2
1-4
1. SERVICE NOTE ENGLISH JAPANESE
1-1.
8.4Vdc10
DCACAC-L200
1-2.
1 2.
DISASSEMBLY
2 4.5V
+4.5Vdc
1-3. ON
RM-95NEW
LANC
JIG
VTR
1-3-1. ON
1) 00101
2) A1001PAUSEWrite
1-3-2. VTRON
1) 00101
2) A1002PAUSEWrite
1-3-3. ON
1) 00101
2) A1000PAUSEWrite
3) 00100
HDR-HC3/HC3E/HC3K/HC3EK_L2
1-5
ENGLISH JAPANESE
1-4.
CPC-15J-6082-564-ALANCI/FJ-6082-521-AVC-441CN1009
CPC-15
(J-6082-564-A)
8
1
8 1
CN1009
VC-441 BOARD
(SIDE A) I/F unit for LANC control
(J-6082-521-A)
1-5.
1-5-1. 1-5-2.
L C D LCD4
3.2Hz5
LCD
C:31:11
3.2Hz
C 31 11
C
1-5-3.
H
31
E
32
HDR-HC3/HC3E/HC3K/HC3EK_L2
1-6
ENGLISH JAPANESE
1-5-3.
C 0 4 0 0
C 2 1 0 0
C 2 2 0 0
C 3 1 1 0 LOAD
C 3 1 1 1 UNLOAD
C 3 1 2 0 UNLOADT
C 3 1 2 1 UNLOADS
C 3 1 2 2 T
C 3 1 2 3 S
C 3 1 3 0 FG
C 3 1 3 1 FG
C 3 1 4 0 FG
C 3 1 4 1 PG
C 3 1 4 2 FG
C 3 1 4 3 PG
C 3 1 4 4
C 3 2 1 0 LOAD
C 3 2 1 1 UNLOAD
C 3 2 2 0 UNLOADT
C 3 2 2 1 UNLOADS
C 3 2 2 2 T
C 3 2 2 3 S
C 3 2 3 0 FG
C 3 2 3 1 FG
C 3 2 4 0 FG
C 3 2 4 1 PG
C 3 2 4 2 FG
C 3 2 4 3 PG
C 3 2 4 4
MRLD-202
C 3 2 6 0
CN7103
ql,
wa
LD-202IC7204
HDR-HC3/HC3E/HC3K/HC3EK_L2
1-7
ENGLISH JAPANESE
MRLD-202CN7103
qh,
qk
E 6 1 1 0
LD-202IC7204
E 6 1 1 1 C:
32:
60E:
61:
10
E 6 2 0 0 PITCHCM-071SE7702
PITCH
E 6 2 0 1 YAWCM-071SE7701
YAW
E 9 1 0 1
1-6.
1-6.
E91**
RM-95NEW
LANC
JIG
1 7 01 75
2 7 00 01 PAUSEWrite
3 7 02 "01"
HDR-HC3/HC3E/HC3K/HC3EK_L2
1-8E
2. DISASSEMBLY
NOTE FOR REPAIR
· Make sure that the flat cable and flexible board are not cracked of bent at the terminal. Cut and remove the part of gilt
Do not insert the cable insufficiently nor crookedly. which comes off at the point.
(Be careful or some
· When remove a connector, dont' pull at wire of connector. It is possible that a wire is snapped. pieces of gilt may be left inside)
· When installing a connector, dont' press down at wire of connector.
It is possible that a wire is snapped.
DISCHARGING OF THE ST-139 BOARD'S CHARGING CAPACITOR (C901)
The charging capacitor (C901) of the ST-139 board is charged
up to the maximum 330 V potential.
There is a danger of electric shock by this high voltage when the Note: High-voltage cautions
capacitor is handled by hand. The electric shock is caused by
the charged voltage which is kept without discharging when the Discharging the Capacitor
main power of the unit is simply turned off. Therefore, the Short-circuit between the two points
with the short jig about 10 seconds.
remaining voltage must be discharged as described below.
Preparing the Short Jig
To preparing the short jig, a small clip is attached to each end of
a resistor of 1 k /1 W (1-215-869-11).
Wrap insulating tape fully around the leads of the resistor to
Top cabinet
prevent electrical shock.
1 k/1 W
ST-139 board
R:1 k/1 W
Wrap insulating tape.
(Part code: 1-215-869-11)
Slide the cover.
NOTE FOR DISCONNECTING THE HARNESS (COAXIAL CABLE)
When disconnecting the harness (coaxial cable), do not pull the
harness part but pull off the connector body with tweezers etc.
Harness (coaxial cable)
Tweezers etc.
HDR-HC3/HC3E/HC3K/HC3EK_L2
2-1
HELP
2-1. DISASSEMBLY
EXPLODED VIEW HARDWARE LIST
2-1-1. OVERALL ASSEMBLY-1
Follow the disassembly in the numerical order given.
1 Grip cover assy (1-1 to 1-2)
2 Top cabinet block (2-1 to 2-8)
Note: High-voltage cautions
Discharging the Capacitor
Short-circuit between the two points
with the short jig about 10 seconds.
Top cabinet 1 Grip Cover Assy
1-1 (#2/#10)
ST-139 board
2-3 (#10)
R:1 k/1 W
(Part code: 1-215-869-11) 2-4 (#3)
Slide the cover. 2 Top Cabinet Block
2-2
2-8 2-7
2-1 (#2/#10)
1-2 (Open the cassette lid)
2-6 (#2/#10)
2-5 (#1/#14)
HDR-HC3/HC3E/HC3K/HC3EK_L2
2-2
2-1-2. OVERALL ASSEMBLY-2
Follow the disassembly in the numerical order given. EXPLODED VIEW HARDWARE LIST
1 EVF block (1-1 to 1-2)
2 Cabinet (R) block (2-1 to 2-9)
3 Front panel Block (3-1 to 3-3)
1 EVF Block
2-3 1-1 1-2 (#9)
(Open the jack cover)
2-4 (#9/#12)
2-2 2-1
2-5
2-7 (#2/#10)
(#1/#14) 3-4
2-6
(#2/#10)
2-9
3-3 (#3)
2 Cabinet (R) Block
3-1
Refer to page 2-1 Note
2-8
for disconnecting the
(#2/#10)
harness (coaxial cable) .
3-2 (#2/#10)
3 Front Panel Block
HDR-HC3/HC3E/HC3K/HC3EK_L2
2-3
2-1-3. FRONT PANEL BLOCK
Follow the disassembly in the numerical order given. EXPLODED VIEW HARDWARE LIST
1 Lens block (1-1 to 1-10)
2 Mic unit (2-1 to 2-2)
3 Motor Unit (3-1 to 3-6)
3-4
3-1
3-2 (#5) 3 Motor Unit (Lens Barrier)
3-6 (#5)
2-2 2-1 (#5)
3-5
3-3 A
B
1-7 C 1-5
1-6 2 Mic Unit
1-1 1-4
1-2 (#3)
1-10
1-3 (Claw)
A
C
B 1-8 (#5)
1-9 (#5)
1 Lens Block
HDR-HC3/HC3E/HC3K/HC3EK_L2
2-4
Ver 1.1 2006.07
2-1-4. LCD PANEL BLOCK
Follow the disassembly in the numerical order given. EXPLODED VIEW HARDWARE LIST
1 PD-276 board (1-1 to 1-19)
2 TP block assy (2-1 to 2-4)
3 Hinge block (3-1 to 3-8)
3-2 (#3)
3-3 (#5) 3-6
3 Hinge Block
3-7 (#2) HELP
3-4
3-5 (#3)
3-1
1-7
2-4
2-1
3-8
2 TP Block Assy
1-15
1-10
1-18(Claw)
1-19 1-5 (#12)
2-3
1 PD-276 Board
2-2
1-11 (#5) 1-12
1-6
PD
-27
6
1-9
1-8
1-16
1-17
1-13
(#5)
1-14
1-1 1-3
(Turn the LCD panel) (Turn the LCD panel)
1-2 (#2)
1-4 (#2)
HDR-HC3/HC3E/HC3K/HC3EK_L2
2-5
2-1-5. CABINET (L) BLOCK-1
Follow the disassembly in the numerical order given. EXPLODED VIEW HARDWARE LIST
1 FP-405 flexible board (1-1 to 1-10)
2 FP-417 flexible board (2-1 to 2-2)
3 DM-111 board (3-1 to 3-4)
3-4
3 DM-111 Board
1
-11
DM
3-3 (#5)
3-2 3-1 (#3)
1-5 (#1/#14)
1-4 2-2
(Open the jack cover.) 1-6 (#3)
1-10 (#3)
1-1
1-9
SI-
04
6 1-2
2-1 (Claw)
1-3
1-7 2 FP-417 Flexible Board
1-8 (#3)
1 FP-405 Flexible Board
HDR-HC3/HC3E/HC3K/HC3EK_L2
2-6
2-1-6. CABINET (L) BLOCK-2
Follow the disassembly in the numerical order given. EXPLODED VIEW HARDWARE LIST
1 Cabinet (G) assy (1-1 to 1-7)
2 Control switch block (2-1 to 2-4)
3 Cabinet (L) assy (3-1 to 3-5)
3 Cabinet (L) Assy
3-1 (#1/#14) 2 Control Switch Block
2-2 (#3)
1-6 (#9)
1-7
2-1 3-4 (#5)
2-4 (Claw)
1-3
(Open the cassette lid.)
3-2 (#1/#14)
2-3 (#9)
1-1 (#1/#14)
1-4 (#2/#10)
3-5
(Remove in the
3-3 (#5) direction of the
1-5 (#1/#14) arrow.)
1-2 (#2/#10)
1 Cabinet (G) Assy
HDR-HC3/HC3E/HC3K/HC3EK_L2
2-7
2-1-7. MD FRAME BLOCK
Follow the disassembly in the numerical order given. EXPLODED VIEW HARDWARE LIST
1 FP-418 flexible board (1-1 to 1-3)
2 VC-441 board (2-1 to 2-8)
3 Mechanism deck (3-1 to 3-4)
3 Mechanism Deck