Text preview for : SONY HCD-H551 SERVICE MANUAL (9-960-534-11).pdf part of SONY HCD-H551 SONY HCD-H551
COMPACT DISC DECK RECEIVER.
SERVICE MANUAL
PART#(9-960-534-11)
Back to : SONY HCD-H551 SERVICE MAN | Home
HCD-H551
SERVICE MANUAL
AEP Model UK Model E Model Tourist Model
HCD-H551 is the tuner, deck, CD and amplifier section in MHC-G55/551.
Photo: E model
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double-D symbol a are trademarks of Dolby Laboratories Licensing Corporation.
Model Name Using Similar Mechanism CD SECTION TAPE DECK SECTION CD Mechanism Type Base Unit Type Optical Pick-up Type Model Name Using Similar Mechanism Tape Transport Mechanism Type
NEW CDM28-5BD19 BU-5BD19 KSS-213BA/F-NP HCD-H501 TCM-220WR2E
SPECIFICATIONS
CD player section System Compact disc and digital audio system Laser Semiconductor ( = 780nm) Emission duration: continuous Laser output Max 44.6 µW* *This output is the value measured at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. Wavelength 780 790 nm Frequency response 2 Hz 20 kHz (±0.5 dB) Signal-to-noise ratio More than 90 dB Dynamic range More than 90 dB Tuner section FM stereo, FM/AM superheterodyne tuner Tourist model: 76.0 108.0 MHz Other models: 87.5 108.0 MHz Aerial FM lead aerial Aerial terminals 75 ohm unbalanced Intermediate frequency 10.7 MHz
FM tuner section East European model: 65.0 78.0 MHz, 87.5 108.0 MHz
AM tuner section Tuning range German, Italian models: AM: 531 1,602 kHz (with the interval set at 9 kHz) AEP, UK, East European models: MW: 531 1,602 kHz (with the interval set at 9 kHz) LW: 153 279 kHz (with the interval set at 3 kHz) Other models: MW: 531 1,602 kHz (with the interval set at 9 kHz) 530 1,710 kHz (with the interval set at 10 kHz) SW: 5.95 17.90 MHz -- Continue on next page --
COMPACT DISC DECK RECEIVER
--1--
MICROFILM
Aerial
AM loop aerial, External aerial terminals Intermediate frequency 450 kHz Amplifier section AEP, UK, German, Italian, East European models: DIN power output 20 W + 20 W (6 ohms, at 1 kHz, DIN) Continuous RMS power output 30W+30W (6 ohms, at 1kHz, 10% THD) Music power output 40 W + 40 W (6 ohms, at 1 kHz, 10% THD) E, Saudi Arabia, Hong Kong, Singapore, Malaysia, Taiwan, Tourist, Thailand, Indonesian models: Peak music power output 400 W Continuous RMS power output 30 W + 30 W (6 ohms at 1 kHz, 10% THD)
General Power requirements AEP, UK, German, Italian, East European models: 220 230 V AC, 50/60 Hz Malaysia model: 220 240 V AC, 50/60 Hz Thailand model: 220 V AC, 50/60 Hz Other models: 110 120 V or 220 240 V AC, 50/60 Hz Adjustable with the voltage selector Power consumption 67 W Dimensions Approx. 280 x 325 x 360 mm (11 1/8 x 12 7/8 x 14 1/4 in) (w/h/d) incl. projecting parts and controls Mass Approx. 7.5 kg (16 lb 9 oz) Design and specifications are subject to change without notice.
Inputs VIDEO IN (phono jacks): Voltage 250 mV, impedance 47 kilohms MIX MIC (phone jacks): ensitivity 1 mV, impedance 10 kilohms Outputs PHONES (stereo phone jack): accepts headphones of 8 ohms or more. SPEAKER: accepts impedance of 6 to 16 ohms. E, Saudi Arabia, Hong Kong, Singapore, Malaysia, Taiwan, Tourist, Thailand, Indonesian models: SUPPER WOOFER: Voltage 1 V, impedance 1 kilohms Tape player section Recording system 4-track 2-channel stereo Frequency response (DOLBY NR OFF) 40 13,000 Hz (±3 dB), using Sony TYPE I cassette 40 14,000 Hz (±3 dB), using Sony TYPE II cassette Wow and flutter ±0.15% W.Peak (IEC) 0.1% W.RMS (NAB) ±0.2% W.Peak (DIN)
--2--
MODEL IDENTIFICATION -- BACK PANEL --
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Parts No.
Notes on chip component replacement · Never reuse a disconnected chip component. · Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing · Keep the temperature of soldering iron around 270°C during repairing. · Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). · Be careful not to apply force on the conductor when soldering or unsoldering. Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior.
MODEL AEP model UK model German model Italian model East European model E model Saudi Arabia, Taiwan model Malaysia model Singapore model Hong Kong model Tourist model Indonesian model Thailand model
PARTS No. 4-979-273-0 4-979-273-1 4-979-273-2 4-979-273-3 4-979-273-4 4-979-274-0 4-979-274-1 4-979-274-2 4-979-274-3 4-979-274-4 4-979-274-5 4-979-274-6 4-979-274-7
This caution label is located inside the unit.
SAFETY-RELATED COMPONENT WARNING !! COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
--3--
TABLE OF CONTENTS
Section Title Page Section Title Page
SECTION 1. SERVICING NOTE ................................ 5 SECTION 2. GENERAL ....................................................... 6 SECTION 3. DISASSEMBLY
3-1. 3-2. 3-3. 3-4. 3-5. Front Panel .......................................................................... 8 TC Mechanism Deck ........................................................... 8 HP Board, Jog Board and Panel Board ............................... 9 CD Block ........................................................................... 10 CD Mechanism Deck ........................................................ 10
SECTION 7. EXPLODED VIEWS
7-1. 7-2. 7-3. 7-4. 7-5. 7-6. 7-7. 7-8. Case Section ...................................................................... 71 Back Panel Section ............................................................ 72 Front Panel Section 1 ......................................................... 73 Front Panel Section 2 ......................................................... 74 CD Mechanism Section (CDM28-5BD19) ....................... 75 Base Unit Section (BU-5BD19) ........................................ 76 TC Mechanism Section 1 (TCM-220WR2E) .................... 77 TC Mechanism Section 2 (TCM-220WR2E) .................... 78
SECTION 8. ELECTRICAL PARTS LIST .................... 79 SECTION 4. MECHANICAL ADJUSTMENTS .......... 11 SECTION 5. ELECTRICAL ADJUSTMENTS
DECK Section ............................................................................. 11 TUNER Section ........................................................................... 14 CD Section ................................................................................... 16 · Abbreviation G: German model. IT: Italian model. EE: East European model. EA: Saudi Arabia model. SP: Singapore model. MY: Malaysia model. TW: Taiwan model. HK: Hong Kong model. IA: Indonesian model. TH: Thailand model. JE: Tourist model.
SECTION 6. DIAGRAMS
6-1. Circuit Boards Location .................................................... 18 6-2. Block Diagrams · Tuner Section (AEP, UK, G, IT, EE Model) .................. 19 · Tuner Section (E, EA, SP, MY, TW, HK, IA, JE Model) ...................... 21 · Tuner Section (TH Model) ............................................. 23 · Deck Section .................................................................. 25 · CD Section ..................................................................... 27 · Main Section .................................................................. 29 6-3. Printed Wiring Board -- Tuner Section -- (AEP, UK, G, IT, EE Model) ............................................. 31 6-4. Schematic Diagram -- Tuner Section -- (AEP, UK, G, IT, EE Model) ............................................. 32 6-5. Printed Wiring Board -- Tuner Section -- (E, EA, SP, MY, TW, HK, IA, JE Model) .......................... 34 6-6. Schematic Diagram -- Tuner Section -- (E, EA, SP, MY, TW, HK, IA, JE Model) .......................... 37 6-7. Printed Wiring Board -- Tuner Section -- (TH Model) ........................................................................ 37 6-8. Schematic Diagram -- Tuner Section -- (TH Model) ........................................................................ 38 6-9. Printed Wiring Board -- Main Section -- ........................ 42 6-10. Schematic Diagram -- Main Section -- ........................... 45 6-11. Schematic Diagram -- Deck Section -- ........................... 49 6-12. Printed Wiring Board -- Deck Section -- ........................ 53 6-13. Printed Wiring Board -- Panel Section -- ........................ 55 6-14. Schematic Diagram -- Panel Section -- ........................... 57 6-15. Schematic Diagram -- CD Section -- .............................. 61 6-16. Printed Wiring Board -- CD Section -- ........................... 63 6-17. IC Block Diagrams -- CD Section -- .............................. 65 6-18. IC Pin Functions · IC501 Graphic Control (ASD042) .................................. 67 · IC701 Master Control (TMP87CP64YF) ....................... 68
--4--
SECTION 1 SERVICING NOTE
NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH TURNS OFF NOTES ON LASER DIODE EMISSION CHECK The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick-up block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens. [Switching the channel step 9 KHz/10 KHz] Press ENTER/NEXT button and POWER button simultaneously to switch the AM channel step 9 KHz and 10 KHz. Be sure not to change with carelessness.
Insert a tapering driver into the aperture of the unit bottom, and turn in the direction of arrow. * To close the disc tray, turn the driver in the reverse direction.
[FL Display Tube, LED All Lit and Key Check mode] When the TUNER/BAND , DISPLAY/DEMO , and MENU 2 buttons are pressed simultaneously, the FL display tube and LEDs will all light up. Press any button to enter the key check mode. When the key check mode is entered, the FL display tube displays "K 1 J0 V0". Each time a button is pressed, the counter increases in the following order, K 2 n K 3 n K 4. If buttons already pressed once are pressed again, the counter will not increase. When the VOLUME knob is rotated in the + direction, the count increases in the following order. V1 n V2 n V3. When rotated in thedirection, it decreases in the following order. V0 n V9 n V8. When the AMS dial is rotated in the clockwise direction, the count increases in the following order. J1 n J2 n J3. When rotated in the counterclockwise direction, it decreases in the following order. J0 n J9 n J8. To exit form the test mode, press the TUNER/BAND , DISPLAY/ DEMO , MENU 2 buttons simultaneously again.
--5--
SECTION 2 GENERAL
This section is extracted from instruction manual.
(AEP, UK, German, Italian, East European models)
(E, Saudi Arabia, Hong Kong, Malaysia, Singapore, Taiwan, Tourist, Thailand, Indonesian models)
1 VIDEO IN jacks (22) 2 SPEAKER L/R connectors (4) 3 SUPER WOOFER jack (22) 4 ANTENNA terminals (4) 5 Voltage selector (Except Malaysia, Thailand models) (5)
--6--
--7--
SECTION 3 DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
3-1. FRONT PANEL
4 Two screws (+BVTP2.6X8)
1 Remove the connectors (Main board: CN402, CN702) (HP board: CN513)
CN402
CN702
CN513
2 Two screws (+BVTT3X8)
5 Remove the claws (Three positions) 3 Two screws (+BVTT3X8)
3-2. TC MECHANISM DECK
6 TC mechanism deck 5 Three screws (+BVTP2.6X8)
3 Cassette holder assembly (A), (B)
2 Remove the claws (Four positions)
1 Push the EJECT button. (Two positions) 4 Torsion spring (L), (R)
--8--
3-3. HP BOARD, JOG BOARD AND PANEL BOARD
*Note: It will be easy to remove if you push lightly from the hole of the JOG board with some screwdrivers or etc.
Screw driver
3 Nut
4 Nut 1 Knob (VOL) * Note 2 Knob (JOG) * Note
.
5 Two screws (+BVTP2.6X8) 6 HP board 8 Six screws (+BVTP2.6X8) 7 Six screws (+BVTP2.6X8) !TM JOG board
!£ Panel board
9 Two claws
!” Claw 0 Three claws
--9--
3-4. CD BLOCK
1 Remove the connectors (Main board: CN201) (Loading board: CN291) 4 CD block (CD mechanism deck and CD chassis) 3 Two screws (+BVTP3X8)
2 PC board holder
CN291 CN201
3-5. CD MECHANISM DECK
1 Two screws (+BVTP3X8)
3 Remove the CD mechanism deck direction of arrow.
2 Two claws
-- 10 --
SECTION 4 MECHANICAL ADJUSTMENTS
Precaution 1. Clean the following parts with a denatured alcohol-moistened swab: record/playback heads pinch rollers erase head rubber belts capstan idlers 2. Demagnetize the record/playback head with a head demagnetizer. 3. Do not use a magnetized screwdriver for the adjustments. 4. After the adjustments, apply suitable locking compound to the parts adjusted. 5. The adjustments should be performed with the rated power supply voltage unless otherwise noted. Torque Measurement
Torque FWD FWD back tension REV REV back tension FF/REW FWD tension REV tension Torque meter CQ-102C CQ-102C CQ-102RC CQ-102RC CQ-201B CQ-403A CQ-403R Meter reading 36 to 61 g · cm (0.5 - 0.84 oz · inch) 2 to 6 g · cm (0.02 - 0.08 oz · inch) 36 to 61 g · cm (0.5 - 0.84 oz · inch) 2 to 6 g · cm (0.02 - 0.08 oz · inch) 61 to 143 g · cm (0.85 - 1.99 oz · inch) 100 g or more (3.53 oz or more) 100 g or more (3.53 oz or more)
SECTION 5 ELECTRICAL ADJUSTMENTS
DECK SECTION 0 dB=0.775V
1. Demagnetize the record/playback head with a head damagnetizer. 2. Do not use a magnetized screwdriver for the adjustments. 3. After the adjustments, apply suitable locking compound to the parts adjusted. 4. The adjustments should be performed with the rated power supply voltage unless otherwise noted. 5. The adjustments should be performed in the order given in this service manual. (As a general rule, playback circuit adjustment should be completed before performing recording circuit adjustment.) 6. The adjustments should be performed for both L-CH and R-CH. 7. Switches and controls should be set as follows unless otherwise specified. DOLBY NR switch: OFF
Tape P-4-A100 WS-48B P-4-L300 Signal 10 kHz, 10 dB 3 kHz, 0 dB 315 Hz, 0 dB Used for Azimuth Adjustment Tape Speed Adjustment Level Adjustment
Record/Playback Head Azimuth Adjustment (Deck A, Deck B) Note: Perform this adjustments for both decks. Procedure: 1. Mode : Playback
test tape P-4-A100 (10kHz, 10dB) main board CN403 Pin 3 (L-CH) level meter Pin 1 (R-CH) set main board CN403 Pin 2 (GND) +
-- 11 --
2. Turn the adjustment screw and check output peaks. If the peaks do not match for L-CH and R-CH, turn the adjustment screw so that outputs match within 1 dB of peak.
Tape Speed Adjustment (Deck A) Note: Start the Tape Speed adjustment as below after setting the test mode. The tape speed can be changed with the HIGH SPEED DUBBING button during the test mode. Method : 1. Turn the power switch on. 2. Press the DISPLAY/DEMO button, MENU 1 button and TUNER/BAND button simultaneously. Procedure : Mode: Playback
L-CH peak
output within level 1dB
within 1dB
screw position
R-CH peak L-CH peak R-CH peak screw position
test tape WS-48B (3kHz, 0dB) set
frequency counter
+
3. Mode: Playback
test tape P-4-A100 (10kHz, 10dB) main board CN403 Pin 3 (L-CH) L set R
main board CN403 Pin 3 (L-CH) Pin 1 (R-CH)
oscilloscope
Pin 2 (GND)
1. Insert the WS-48B into the deck A to playback. 2. Press the HIGH SPEED DUBBING button. Then at HIGH SPEED mode. 3. Adjust the RV652 on the MD board so that the frequency counter reading becomes 6,000 ± 30 Hz. 4. Press the HIGH SPEED DUBBING button again to be set the NORMAL SPEED mode. 5. Set to the playback mode. 6. Adjust the RV651 on the MD board so that the frequency counter reading becomes 3,000 ± 15 Hz. Frequency difference between deck A and deck B the beginning of the tape should be within ± 1.5%. Adjustment Location: MD board Playback Level Adjustment (Deck A, Deck B)
Pin 1 (R-CH) Waveform of oscilloscope
in phase
45° good
90°
135°
180°
wrong
Procedure: Mode: Playback
test tape P-4-L300 (315Hz, 0dB) set main board CN403 Pin 3 (L-CH) Pin 1 (R-CH)
4. After the adjustments, apply suitable locking compound to the parts adjusted. Adjustment Location: Playback Head (Deck A) Record/Playback/Erase Head (Deck B)
level meter
Deck A is RV311 (L-CH) and RV411 (R-CH), deck B is RV301 (L-CH) and RV401 (R-CH) so that adjustment within the following adjustment level. Adjustment level: CN403 playback level: 301.5 to 338.3 mV (8.2 to 7.2 dB) level difference between the channels: within ± 0.5 dB Adjustment Location: MD board
FWD side
REV side
Adjustment screw
-- 12 --
Record Bias Adjustment (Deck B) Procedure: 1. Press FUNCTION button to Select VIDEO. 2. Mode: record
VIDEO IN 1) 315Hz } 50 mV (23.8 dB) 2) 10kHz AF OSC 600 attenuator set blank tape CS-123
Record Level Adjustment (Deck B) Procedure: 1. Press FUNCTION button to Select VIDEO. 2. Mode: record
VIDEO IN 315kHz 50mV (23.8 dB) AF OSC 600 attenuator set blank tape CS-123
3. Mode: Playback
recorded position set level meter
3. Mode: Playback
recorded portion set level meter
main board CN403 Pin 3 (L-CH) Pin 1 (R-CH)
main board CN403 Pin 3 (L-CH) Pin 1 (R-CH)
4. Confirm playback the signal recorded in step 2 become adjustment level as follows. If these levels do not adjustment level, adjust the RV341 (L-CH) and RV441 (R-CH) on the MD board to repeat steps 2 and 3. Adjustment level: The playback output of 10 kHz level difference against 315 Hz reference should be ± 0.5 dB. Adjustment Location: MD board
4. Confirm playback the signal recorded in step 2 become adjustment level as follows. If these levels do not adjustment level, adjust the RV301 (L-CH) and RV351 (R-CH) on the main board to repeat steps 2 and 3. Adjustment level: CN403 PB level: 47.3 to 53.1 mV (24.3 to 23.3 dB) Adjustment Location: MAIN board
Adjustment Location: [MD BOARD] (Conductor Side)
RV341 (L CH), 441 (R CH) Record Bias Adjustment RV301 RV401 RV441 RV341 RV651 (Normal speed) RV652 (High speed) RV651 Tape Speed Adjustment RV311 RV411 RV311 (L CH), 411 (R CH) Playback Level Adjustment (Deck A) RV652
[MAIN BOARD] (Component Side)
1 3 CN403 RV351 Record Level Adjustment (R CH)
RV351 IC401 RV301
RV301 (L CH), 401(R CH) Playback Level Adjustment (Deck B)
RV301 Record Level Adjustment (L CH)
-- 13 --
TUNER SECTION
0dB=1µV
Note: As a front-end (FE1) is difficult to repair if faulty, replace it with new one. AM Tuned Level Adjustment Note: FM Tuned Level adjustment should be performed after this AM Tuned Level Adjustment. Setting: Band: AM or MW
loop antenna (Supplied accessories)
loop antenna
AM RF SSG set
30% amplitude modulation by 400Hz signal
60cm
AM antenna terminal (TM1)
Field strength dB (µV/m) = SSG output level dB (µV/m) 26dB.
Modulation: 999 kHz (at 9 kHz step) 1,050 kHz (at 10 kHz step)
Procedure: 1. Set the output of SSG so that the input level of the set becomes 55 dB. 2. Tune the set to 999 kHz or 1,050 kHz. 3. Adjust RV41 (EXCEPT Thailand model), RV42 (Thailand model) to the point (moment) when the TUNED indicator will change from going off to going on. Adjustment Location: TCB board FM Tuned Level Adjustment Note: This adjustment should be after AM Tuned Level Adjustment. Setting: Band: FM
FM RF stereo signal generator 75 coaxial
Adjustment Location: EXCEPT Thailand model [TCB BOARD] (Component Side)
RV41 RV41 AM Tuned Level Adjustment
RV42
IC41
TM1
RV42 FM Tuned Level Adjustment FE1
Thailand model [TCB BOARD] (Component Side)
set RV42 RV42 AM Tuned Level Adjustment
Carrier frequency: 98MHz Modulation: AUDIO 1kHz, 75kHz deviation (100%) Output level: 25dB (at 75 open)
FM ANTENNA terminal (TM1)
Procedure: 1. Supply a 25 dB 98 MHz signal from the ANTENNA terminal. 2. Tune the set to 98 MHz. 3. Adjust RV42 (EXCEPT Thailand model), RV41 (Thailand model) to the point (moment) when the TUNED indicator will change from going off to going on. Adjustment Location: TCB board
RV41
IC2
TM1
RV41 FM Tuned Level Adjustment FE1
-- 14 --
SW OSC Voltage Adjustment (E, EA, MY, SP, HK, TW, IA model) Setting: Band: SW Procedure: 1. Connect digital Voltmeter to diode D1 center lead and ground. 2. Adjust for a following value reading on digital voltmeter.
Set frequency 5.95 MHz SW 17.9 MHz Adjustment part T2 CV2 Reading on digital voltmeter 1.2 ± 0.1 V 8.5 ± 0.2 V
Adjustment Location: [TCB BOARD] -- Component Side --
D1, CV2, T2 SW OSC Voltage Adjustment CV2 CV1 IC41 T2 D1 TM1 T1 CV1, T1 SW Tracking Adjustment
SW Tracking Adjustment (E, EA, MY, SP, HK, TW, IA model) Setting: Band: SW
AM RF SSG level meter
set 30% amplitude modulation by 400Hz signal SPEAKER terminal AM ANTENNA terminal
· Abbreviation EA: Saudi Arabia model. MY: Malaysia model. SP: Singapore model. HK: Hong Kong model. TW: Taiwan model. IA: Indonesian model.
Procedure: Adjust for maximum reading on level meter.
Set frequency 7 MHz SW 17 MHz Adjustment part T1 CV1
· Repeat the procedures is each adjustment several times, and the frequency coverage and tracking adjustment should be finally done by the trimmer capacitors.
-- 15 --
CD SECTION
Note: 1. CD Block is basically designed to operate without adjustment. Therefore, check each item in order given. 2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated. 3. Use an oscilloscope with more than 10M impedance. 4. Clean the object lens by an applicator with neutral detergent when the signal level is low than specified value with the following checks. 5. Adjust the focus bias adjustment when optical block is replaced. Focus Bias Adjustment
oscilloscope BD board TP (RF) TP (VC)
S Curve Check Procedure :
BD board TP (FE) TP (VC) oscilloscope
Connect oscilloscope to test point TP (FEO). Connect between test point TP (FOK) and Ground by lead wire. Turn Power switch on. Put disc (YEDS-18) in and turned Power switch on again and actuate the focus search. (actuate the focus search when disc table is moving in and out.) 5. Check the oscilloscope waveform (S-curve) is symmetrical between A and B. And confirm peak to peak level within 2.4 ± 0.7 Vp-p.
S-curve waveform
1. 2. 3. 4.
6. After check, remove the lead wire connected in step 2. Procedure: 1. Connect oscilloscope to test point TP (RF). (Ground terminal : TP (VC)) 2. Turned Power switch on. 3. Put disc (YEDS-18) in and playback. 4. Adjust RV101 so that the waveform is clear. (Clear RF signal waveform means that the shape " " can be clearly distinguished at the center of the waveform.) 5. After adjustment, check the RF signal level. · RF signal VOLT/DIV: 200 mV TIME/DIV: 500 nS
symmetry
A within 2.4 ± 0.7 Vp-p B
Note: · Try to measure several times to make sure than the ratio of A : B or B : A is more than 10 : 7. · Take sweep time as long as possible and light up the brightness to obtain best waveform. RF Level Check Procedure :
level: 1.3 ± 0.3 Vp-p BD board TP (RF) TP (VC)
oscilloscope
Connect oscilloscope to test point TP (RF) on BD board. Turned Power switch on. Put disc (YEDS-18) in and playback. Confirm that oscilloscope waveform is clear and check RF signal level is correct or not. Note: Clear RF signal waveform means that the shape " " can be clearly distinguished at the center of the waveform.
RF signal waveform VOLT/DIV: 200 mV TIME/DIV: 500 nS level: 1.3 ± 0.3 Vp-p
1. 2. 3. 4.
-- 16 --
E-F Balance Check
oscilloscope BD board
Adjustment Location: [BD BOARD] -- Component Side --
RF FOK
TP (TEO) TP (VC)
RV101 IC101 RV103 TEO VC FEO RV102 TEI FEI
Procedure: 1. Connect test point TP701 (ADJ) on Main board to Ground with a lead wire. 2. Connect oscilloscpe to test point TP (TEO). 3. Turned Power switch on. 4. Put disc (YEDS-18) in and playback. 5. Confirm that the oscilloscope waveform is symmetrical on the top and bottom in relation to 0Vdc, and check this level.
Traverse waveform A 0V B
IC104 PCK GND
level: 300 ± 100 mVp-p
[MAIN BOARD] -- Conductor Side --
A B x 100 = less than ± 7% Specified level: · 2 (A + B) · A + B = 300 ± 100 mVp-p 6. Remove the lead wire connected in step 1. Focus/Tracking Gain Adjustment (RV102, RV103) This gain has a margin, so even if it is slightly off. There is no problem. Therfore, do not perform this adjustment. Please note that it should be fixed to mechanical center position when you moved and do not know original position.
IC701 TP701 (ADJ)
-- 17 --
IC102
SECTION 6 DIAGRAMS
6-1. CIRCUIT BOARDS LOCATION
TRANSFORMER board TCB board
PANEL board
MAIN board
HP board
POWER AMP board JOG board Note: pA is including in MD board.
BD board
LOADING board
pA MOTOR board
LEAF SWITCH board
MD board (including p A)
-- 18 --
6-18. IC PIN FUNCTIONS
· IC501 GRAPHIC CONTROL (ASD042) Pin No. 1 to 7 8 9, 10 11 12 13 14 15 16 17 18 19 20 21 to 24 25 to 28 29 30 31 32 33 34 35 36 to 39 40, 41 42, 43 44 45 46 47 48 49, 50 51 52 53 to 70 71 72 to 75 76 to 80 VDD LED9, 10 KEY SELECT VOL IN B REQ GM CLK MG DATA GM DATA MG RESET PANEL SW LED SELECT AVSS SPEANA IN1-4 KEY IN1-4 AVDD AVREF JOG IN B XT2 VSS X1 X2 LED8-5 LED4,3 LED2,1 VOL IN A JOG IN A RDY MG SIRCS IN IC (VPP) LED12, 13 LED11 VDD SEG22-5 V. LOAD SEG4-1 GR12-8 Pin Name GR7-1 I/O O O O I I/O I O I I I O I I I I I O O O O I I I I O O O O O Function Fluorescent indicator tube grid signal output. +5V LED drive signal output Not used. (Open) Volume encoder signal input. Request signal from/to master control. Serial clock input. Serial data output to master control. Serial data input from master control. Reset signal input. CD door open detection input. (Not used) (Open) LED select signal output. Ground Spectram analizer signal input. (Connected to ground) Key matrix input. +5V Jog dial encoder signal input. Not used. (open) Ground X'tal (5 MHz). LED drive signal output. (Not used) (open) LED drive signal output. Volume encoder signal input. Jog dial encoder signal input. Ready signal from master contorl. SIRCS signal input. Ground LED drive signal output. +5V Fluorescent indicator tube segment signal output. 25V for Fluorescent indicator tube. Fluorescent indicator tube segment signal output. Fluorescent indicator tube grid signal output.
-- 67 --
· IC701 MASTER CONTROL (TMP87CP64YF) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 VSS XOUT XIN RESET XOUT XIN GND (test) AC CUT SUPER WOOFER ON ST-MUTE ON 180-A-PLAY 180-B-PLAY 180-B-REC CLK CHK UP-SW IN-SW ENCODER-0 ENCODER-1 ENCODER-2 OUT SW OPEN LOAD IN LOAD OUT TBL-L TBL-R SCOR TBL-SENS RDS INT RDS DATA DF LAT SENS XRST MG-RDY ADJ GM-REQ MG-CLK GM-DATA MG-DATA CD-CLK ADJ-2 CD-DATA Pin Name I/O O I I O I I O O I I I I I I I I I I O O O O I I I I O I O O I I O I O O I O Loading motor control signal output. Table motor control signal output. (Not used) (Open) Sub-code sync signal input. CD Table sensor signal input. (Not used) (Connected to ground) RDS data start input. (Not used) (Connected to ground) RDS data start output. (Not used) (Connected to ground) Latch signal for digital filter. Table sence signal input. Reset signal output for CD. Ready signal to graphic control. Test mode input. Request signal from graphic control. Clock signal to graphic control. Data input from graphic control. Data output to graphic control. Clock output. Serial bus line. Test mode input. Data output. Serial bus line. Loading out detection signal input. Disctray address detect encoder input. (Not used) (Connected to ground) Not used. (pull up) Disc table up detect. (Not used) (Connected to ground) Loading in detection signal input. Tape detection signal input. (Not used) (Connected to ground) X'tal for clock (32.768 MHz). Ground Back up signal input. Not used. (Connected to ground) Mute signal output for tuner. X'tal (10 MHz). Reset signal input. Function Ground
-- 68 --
Pin No. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
Pin Name AUB IN AUB OUT FOCUS SW SQ-CLK SQ-DATA X-LAT TEST VAREF VASS VSS VDD SPEC DESTINATION DISC SENS TC RELAY A-SHUT B-SHUT B-HALF A-HALF 220-A-PLAY 220-B-PLAY 62427 LAT K-CON-LAT VOL LAT (AV) REAR SP RELAY B FRONT SP RELAY C POWER ON CD POWER PROLOG LAT MUTE COM CLK COM DIN COM DATA K CON ON LIDDED LED PROLOG ON DBFB-HIGH URG STB STDBY URG STB ON TC A
I/O I O O O I O I I I I I O I I I I I I O O O O O O O O O O I O O O O O I O O PLL latch output. Not used. (Open) Control signal input from deck. Audio bus in/output. (Not used) (Open) Focus switching signal output. Subcode Q data read clock output. Subcode Q data input. Latch signal digital signal processor. Test land. Analog reference voltage input. Ground +5V Destination detection setting input. Not used. (Connected to ground) REC/PB select signal output.
Function
Latch signal for electrical volume. (Not used) (Open) Not used. (Open) Power on signal output. CD power control signal output. Not used. (Open) Mute signal for AMP. PLL clock output. PLL data input. PLL data output. Not used. (Open) Disc No. LED drive signal output. (Not used) (Open) PRO LOGIC control output. (Not used) (Open) DBFB switching signal output. Not used. (Pull-down) Not used (Open) Deck A, B select output.
-- 69 --
Pin No. 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
Pin Name NORM BIAS OFF REC MUTE NR OFF PB PASS. AMP/DOLBY LINE MUTE ON CAP. M-HIGH A-TRG B-TRG TRG LOW CAP M ON STEREO TUNED ST-CE DELAY SEL MIC DELAY ON DELAY LEVEL A DELAY LEVEL B VDD
I/O O O O O O O O O O O O O I I O O O O O +5V Not used. (Connected to ground) NORMAL/HIGH control signal output. Bias oscillation output. Mute output. Dolby ON/OFF signal output. REC/PB control signal output. Dolby switching signal output. Mute signal output for deck. Capstan motor control signal output. Trigger motor control signal output.
Function
Trigger motor high/low contorol signal output. Capstan motor ON/OFF control signal output. Stereo dection signal from tuner. Tuned detection signal from tuner. Latch signal output for tuner.
-- 70 --
NOTE: · Items marked "*" are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. · The mechanical parts with no reference number in the exploded views are not supplied. · Hardware (# mark) list and accessories and packing materials are given in the last of this parts list.
· Abbreviation G: German model IT: Italian model EE: East European model EA: Saudi Arabia model HK: Hong Kong model SP: Singapore model MY: Malaysia model TW: Taiwan model JE: Tourist model TH: Thailand model IA: Indonesian model
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
7-1. CASE SECTION
#1
2
1
CDM28-5BD19 #1
11 3 10
not supplied
4 8 3 5 6 7 9
#1 #1
FRONT PANEL
#2 #2
Ref. No. 1 2 2 3 4 4 5 5 5 5
Part No. 4-978-836-01 4-978-748-21 4-983-000-01 3-363-099-01 1-751-086-11 1-773-012-11 A-4303-506-A A-4303-514-A A-4303-515-A A-4303-516-A
Description PANEL, LOADING CASE (EXCEPT IA) CASE (IA) SCREW (CASE 3 TP2) WIRE (FLAT TYPE)(13 CORE)(TH)
Remark
Ref. No. * 5 * 5 * 5 6 7 8 9 * 10 * 11
Part No. A-4303-518-A A-4303-520-A A-4303-537-A 1-769-946-11 1-769-940-11 1-773-158-11 1-776-166-11 4-978-853-01 4-951-620-01
Description TCB BOARD (E,EA,HK,MY,SP,TW) TCB BOARD (JE) TCB BOARD (TH) WIRE (FLAT TYPE)(11 CORE) WIRE (FLAT TYPE)(11 CORE) WIRE (FLAT TYPE)(21 CORE) WIRE (FLAT TYPE)(19 CORE) CHASSIS, CDM SCREW (2.6X8), +BVTP
Remark
* * * *
WIRE (FLAT TYPE)(15 CORE)(EXCEPT TH) TCB BOARD (IA) TCB BOARD (AEP,UK) TCB BOARD (G,IT) TCB BOARD (EE)
-- 71 --
7-2. BACK PANEL SECTION
(EXCEPT UK, E, JE, TH Model)
CNP1601 (UK Model)
58 (HK Model) 58 (EA, SP,
TW, IA Model) CNP1601
58
(E, JE, TH Model) CNP1601 (E, JE, TH Model)
51
F1603
56 59
60
#2
#2 #1 (p) F1602 #3 #1 #1
T1601
57
#1
F1601 #1
#1
53
#1
54
55 (including p)
not supplied
Ref. No. * 51 52 53 * 54 * 54 * * * * * 54 54 54 54 54 Part No. 1-659-332-11 1-537-770-21 4-965-822-01 A-4389-425-A A-4389-426-A A-4389-427-A A-4389-428-A A-4389-429-A A-4390-120-A A-4390-506-A Description TRANSFORMER BOARD TERMINAL BOARD, GROUND FOOT MAIN BOARD, COMPLETE (AEP,UK) MAIN BOARD, COMPLETE (G,IT) MAIN BOARD, COMPLETE (EE) MAIN BOARD, COMPLETE (E,EA,HK,MY,SP,TW) MAIN BOARD, COMPLETE (JE) MAIN BOARD, COMPLETE (TH) MAIN BOARD, COMPLETE (IA)
53
Remark
52
Ref. No. * 59 * 59 * 59 * * * * * * * * * 59 59 59 59 59 Part No. Description
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Remark
4-979-273-11 PANEL, BACK (UK) 4-979-273-21 PANEL, BACK (G) 4-979-273-31 PANEL, BACK (IT) 4-979-273-41 4-979-274-01 4-979-274-11 4-979-274-21 4-979-274-31 PANEL, BACK (EE) PANEL, BACK (E) PANEL, BACK (EA,TW) PANEL, BACK (MY) PANEL, BACK (SP) PANEL, BACK (HK) PANEL, BACK (JE) PANEL, BACK (IA) PANEL, BACK (TH) BAND, PLUG FIXED (UK, HK) CORD, POWER (EXCEPT UK,E,JE,TH) CORD, POWER (E,JE) CORD, POWER (TH) CORD, POWER (UK) FUSE, TIME LAG (4.0A 250V) FUSE, TIME LAG (4.0A 250V) FUSE, TIME LAG (1.6A 250V) (E,JE,EA,HK,SP,TW,IA)
* 55 * 55 * 55 * 55 * 56 56 56 * 57 ! 58 ! 58 ! 58 * 59
A-4389-444-A POWER AMP BOARD, COMPLETE (AEP,UK,G,IT,EE) A-4389-445-A POWER AMP BOARD, COMPLETE (E,JE,EA,HK,MY,SP,TW,IA) A-4390-127-A POWER AMP BOARD, COMPLETE (TH) A-4390-513-A POWER AMP BOARD, COMPLETE (IA) 3-703-244-00 BUSHING (2104), CORD (EXCEPT E,JE,TH,IA) 3-703-571-11 4-966-266-01 4-979-520-01 1-569-007-11 1-569-008-11 BUSHING (S)(4516), CORD (E,JE,TH) BUSHING (S)(FBS002), CORD (IA) HEAT SINK ADAPTER, CONVERSION 2P (E,JE) ADAPTER, CONVERSION 2P (EA,SP,TW,IA)
59 4-979-274-41 59 4-979-274-51 59 4-979-274-61 59 4-979-274-71 60 4-956-370-12 ! CNP1601 1-575-651-11 ! CNP1601 1-575-653-11 ! CNP1601 1-751-326-31 ! CNP1601 1-751-520-21 ! F1601 1-532-504-31 ! F1602 1-532-504-31 ! F1603 1-532-503-31
1-770-019-11 ADAPTOR, CONVERSION PLUG 3P (HK) 4-979-273-01 PANEL, BACK (AEP)
! T1601 ! T1601
1-429-438-11 TRANSFORMER, POWER (AEP,UK,G,IT,EE) 1-429-465-11 TRANSFORMER, POWER (E,JE,EA,HK,MY,SP,TW,IA,TH)
-- 72 --
7-3. FRONT PANEL SECTION 1 113
not supplied Supplied with J501, J601
116 114
113 115 119 108
FL501
113 119
112 101
Supplied with S562
111 109 113
107
117 108
Supplied with S561
110 111
106 102
#11
104 103
118
#11
TCM-220WR2E
117
Ref. No. 101 101 102 103 104 104 106 106 107 107 108 * 109 * 110
Part No. X-4946-727-1 X-4947-193-1 4-959-231-11 4-959-232-11 X-4946-728-1 X-4947-194-1 4-978-733-01 4-978-733-11 4-978-732-01 4-978-732-11
Description
Remark
Ref. No. 111 * 112 113 114 115 116 116
Part No.
Description
Remark
HOLDER (A) ASSY, CASSETTE (EXCEPT IA) HOLDER (A) ASSY, CASSETTE (IA) SPRING (L), TORSION SPRING (R), TORSION HOLDER (B) ASSY, CASSETTE (EXCEPT IA) HOLDER (B) ASSY, CASSETTE (IA) KNOB, VOL (EXCEPT IA) KNOB, VOL (IA) KNOB, JOG (EXCEPT IA) KNOB, JOG (IA)
3-354-957-01 JOINT (LOCK LEVER) 1-659-333-11 JOG BOARD 4-951-620-01 1-659-331-11 4-978-168-01 A-4389-446-A A-4389-447-A A-4390-128-A A-4390-514-A 3-354-963-01 4-980-439-01 4-932-810-11 SCREW (2.6X8), +BVTP HP BOARD HOLDER, FL TUBE PANEL BOARD, COMPLETE (AEP,UK,G,IT,EE) PANEL BOARD, COMPLETE (E,JE,EA,HK,MY,SP,TW) PANEL BOARD, COMPLETE (TH) PANEL BOARD, COMPLETE (IA) DAMPER FULCRUM, HOLDER CUSHION (FL)
* * * *
4-980-219-01 BUTTON (EJECT)(E5) 3-354-953-01 LEVER (LOCK LEVER L) 3-354-954-01 LEVER (LOCK LEVER R)
* 116 * 116 117 * 118 * 119 FL501
1-517-489-11 INDICATOR TUBE, FLUORESCENT
-- 73 --
7-4. FRONT PANEL SECTION 2 151
160 159 158 152
161 163 154 164 157
not supplied
162 153 155 156
Ref. No. 151 151 151 152 153 154 155 156
Part No. X-4946-712-1 X-4946-714-1 X-4947-189-1 X-4946-706-1 4-978-716-01
Description
Remark
Ref. No. 157 158 159 160 161 162 163 164
Part No.
Description
Remark
PANEL ASSY, FRONT (AEP,UK,G,IT,EE) PANEL ASSY, FRONT (E,JE,EA,HK,MY,SP,TW,TH) PANEL ASSY, FRONT (IA) BUTTON (T/B) ASSY WINDOW, FL
X-4946-707-1 BUTTON (TC-PLAY) ASSY 4-978-744-31 PLATE, ORNAMENTAL, MULTI 4-978-742-01 4-978-839-01 4-978-837-01 4-978-851-01 X-4946-713-1 HOLDER, MULTI LED BUTTON, MULTI BUTTON, POWER INDICATOR, REC BUTTON (CD-PLAY) ASSY
4-962-708-11 EMBLEM (4-A), SONY 4-978-745-11 PLATE, ORNAMENTAL, JOG 4-930-336-61 FOOT (FELT)
X-4946-801-1 BUTTON (ENTER/NEXT)(E5) ASSY
-- 74 --
7-5. CD MECHANISM SECTION (CDM28-5BD19)
206 204 203
(including rB)
205
207
#1
208 209
202
not supplied
M903
rB
210
BU-5BD19
213
#1
211
201 212
Ref. No. 201 202 203 204 205 206
Part No. 4-960-836-01 4-960-835-01 1-452-719-11 4-960-842-01 4-960-841-01
Description TABLE, DISC HOLDER (M) MAGNET ASSY GEAR (P) PULLEY (S)
Remark
Ref. No. * 207 208 209 210 211 212 * 213 M903
Part No. 4-960-839-01 4-960-838-03 4-917-583-21 4-933-134-01 4-959-996-01 4-960-834-01 1-650-836-11 A-4604-363-A
Description CAM BASE (MD) BRACKET, YOKE SCREW (+PTPWH M2.6X6) SPRING (932), COMPRESSION HOLDER (BU) LOADING BOARD MOTOR (L) ASSY (LOADING)
Remark
4-927-649-01 BELT
-- 75 --
7-6. BASE UNIT SECTION (BU-5BD19)
301
302
rA
303
#5
305
M101 (including rA) M102
304
304
S101
306
307
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Remark
308
Ref. No. ! 301 302 303 304 305 Part No. 8-848-367-11 1-769-069-11 4-917-567-01 4-951-940-01 4-917-565-01 Description OPTICAL PICK-UP KSS-213BA/F-NP WIRE (FLAT TYPE)(16 CORE) GEAR (M) INSULATOR (BU) SHAFT, SLED Remark Ref. No. 306 * 307 308 M101 M102 S101 Part No. 4-917-564-01 A-4673-402-A 4-951-620-01 X-4917-523-4 X-4917-504-1 Description GEAR (P), FLATNESS BD BOARD, COMPLETE SCREW (2.6X8), +BVTP MOTOR ASSY (SPINDLE) MOTOR ASSY (SLED)
1-572-085-11 SWITCH, LEAF (LIMIT)
-- 76 --
7-7. TC MECHANISM SECTION 1 (TCM-220WR2E)
#6
369 371 (including pA)
#6
372 365 364
not supplied
366 362
HP101
373
357 358 359 360 361 363 369 365 364 367
not supplied
356
373 366 357 362 363 361 369
355
not supplied
354
not supplied
HRPE101
368
353 356
not supplied
359 358
355 352 351
not supplied #10
360 354 352 351
not supplied #10
353
Ref. No. 351 352 * 353 354 355 356 * 357 358 359 360 361
Part No. 3-908-560-01 3-919-684-01 X-3367-584-2 3-908-556-01 3-908-558-02 3-908-557-02 3-908-559-01 3-908-555-01 3-917-143-11 3-388-848-01
Description SPRING, AZIMUTH ADJUSTMENT SCREW, AZIMUTH ADJUSTMENT SLIDER (HEAD) ASSY SPRING, HEAD TOGGLE FITTING BLOCK, HEAD ROTARY BLOCK, HEAD STOPPER, AZIMUTH SLIDER (REV SLIDER) SPRING, TENSION SCREW (P2X6)(B TIGHT)
Remark
Ref. No. 362 363 364 365 366 367 368 369 * 371
Part No. X-3370-643-1 X-3367-588-1 3-908-613-01 3-917-141-01 X-3371-305-1 3-669-465-01 X-3370-173-1 3-911-116-21 A-2007-435-A
Description PINCH LEVER (REV) ASSY PINCH LEVER (FWD) ASSY GEAR (S), REEL SPRING, COMPRESSION REEL (T) ASSY WASHER (1.5), STOPPER TU ASSY RIVET, PUSH MD BOARD, COMPLETE DETENT, HALF SPRING, COMPRESSION HEAD, MAGNETIC (PLAYBACK) HEAD, MAGNETIC (REC/PB/ERASE)
Remark
3-911-113-01 SPRING, TENSION
372 3-930-972-01 373 3-917-142-01 HP101 1-500-093-11 HRPE101 1-500-094-11
-- 77 --
7-8. TC MECHANISM SECTION 2 (TCM-220WR2E)
pA: MOTOR board (Supplied with MD board)
425
pA
M2
418
419 421
#9 #8
417
420
410 421 411
#8
402
409 413 422
416
#10
410 424 415 407 408 405 412 406 419
414
407 413
423
#4
404 403
#7 #7 M1
Ref. No. 401 402 403 404 405 406 407 408 409 410 411 412 413 Part No. 3-908-597-01 3-908-608-11 X-3367-590-2 X-3370-169-1 3-928-047-01 3-908-599-01 3-908-601-01 3-908-603-01 X-3370-170-1 3-908-605-01 Description CAM (A) SCREW, STEP ARM (A) ASSY, FR FLYWHEEL (AR) ASSY PULLEY, TENSION LEVER (REV-A) SPRING (REV LEVER), TORSION LEVER (TRIGGER A) FLYWHEEL (BF) ASSY SPRING (TRIGGER), TORSION
402
not supplied
Remark Ref. No. 414 415 * 416 417 418 419 420 421 422 423 424 * 425 M1 M2 Part No. Description
401
Remark
X-3370-171-1 FLYWHEEL (BR) ASSY 3-908-600-01 LEVER (REV-B) 1-650-669-11 3-908-598-01 X-3369-849-2 3-914-111-01 3-908-604-01 3-911-115-01 3-917-176-11 X-3370-172-1 X-3371-441-1 A-2007-435-A LEAF SWITCH BOARD CAM (B) ARM (B) ASSY, FR SPRING (FR), TORSION LEVER (TRIGGER B) WASHER, STOPPER BELT (B) FLYWHEEL (AF) ASSY CHASSIS ASSY, MECHANICAL MD BOARD, COMPLETE
3-908-609-01 GEAR, TRIGGER 3-913-845-11 BELT (A) 3-913-846-11 BELT (FR)
X-3371-223-1 MOTOR ASSY (CAPSTAN) A-2004-410-A MOTOR ASSY (TRIGGER)
-- 78 --
SECTION 8 ELECTRICAL PARTS LIST
Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. When indicating parts by reference number, please include the board name. · Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. · Items marked "*" are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. · RESISTORS All resistors are in ohms METAL: Metal-film resistor METAL OXIDE: Metal Oxide-film resistor F : nonflammable · SEMICONDUCTORS In each case, u: µ , for example: uA...: µ A..., uPA...: µ PA..., uPB...: µ PB..., uPC...: µ PC..., uPD...: µ PD... · CAPACITORS uF : µ F · COILS uH : µ H · Abbreviation G: German model IT: Italian model EE: East European model EA: Saudi Arabia model HK: Hong Kong model SP: Singapore model MY: Malaysia model TW: Taiwan model JE: Tourist model TH: Thailand model IA: Indonesian model
BD
Ref. No. *
Part No.
Description
Remark
Ref. No. C137 C139 C140 C141 C142
Part No. 1-164-232-11 1-163-235-11 1-163-235-11 1-163-038-91 1-163-038-91 1-135-201-11 1-135-201-11 1-163-275-11 1-163-275-11 1-164-346-11
Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 22PF 22PF 0.1uF 0.1uF 10uF 10uF 0.001uF 0.001uF 1uF 10uF 22PF 5% 5%
Remark 50V 50V 50V 25V 25V 4V 4V 50V 50V 16V 6.3V 50V
A-4673-402-A BD BOARD, COMPLETE ****************** < CAPACITOR > C101 C102 C103 C105 C106 C107 C108 C109 C110 C111 C112 C113 C114 C115 C116 C117 C118 C119 C120 C121 C122 C123 C124 C125 C126 C127 C128 C129 C130 C131 C132 C133 C134 C135 C136 1-126-607-11 1-163-275-11 1-164-346-11 1-163-038-91 1-164-695-11 1-164-695-11 1-164-232-11 1-164-232-11 1-163-989-11 1-163-038-91 1-163-038-91 1-164-695-11 1-164-005-11 1-126-607-11 1-163-016-00 1-164-005-11 1-107-823-11 1-163-038-91 1-135-201-11 1-163-038-91 1-164-232-11 1-163-038-91 1-126-607-11 1-164-232-11 1-163-038-91 1-164-695-11 1-163-135-00 1-163-038-91 1-164-336-11 1-163-038-91 1-163-037-11 1-163-145-00 1-164-346-11 1-163-251-11 1-164-005-11 ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 47uF 0.001uF 1uF 0.1uF 0.0022uF 0.0022uF 0.01uF 0.01uF 0.033uF 0.1uF 0.1uF 0.0022uF 0.47uF 47uF 0.0039uF 0.47uF 0.47uF 0.1uF 10uF 0.1uF 0.01uF 0.1uF 47uF 0.01uF 0.1uF 0.0022uF 560PF 0.1uF 0.33uF 0.1uF 0.022uF 0.0015uF 1uF 100PF 0.47uF 20% 5% 4V 50V 16V 25V 50V 50V 50V 50V 25V 25V 25V 50V 25V 4V 50V 25V 16V 25V 4V 25V 50V 25V 4V 50V 25V 50V 50V 25V 25V 25V 25V 50V 16V 50V 25V
5% 5%
C145 C146 C147 C148 C149 C153 C154
20% 20% 5% 5%
1-135-259-11 TANTAL. CHIP 1-163-235-11 CERAMIC CHIP < CONNECTOR >
20% 5%
10%
5% 20% 10%
CNU101 1-770-014-11 CONNECTOR, FFC/FPC 16P CNU102 1-770-013-11 CONNECTOR, FFC/FPC 19P < IC > IC101 IC102 IC103 IC104 8-752-069-56 8-759-291-06 8-752-372-94 8-759-185-29 IC CXA1782BQ IC BA6397FP IC CXD2507AQ IC PCM1710U-B < TRANSISTOR > Q101 Q102 Q103 8-729-010-08 TRANSISTOR MSB710-R 8-729-424-08 TRANSISTOR UN2111 8-729-421-22 TRANSISTOR UN2211 < RESISTOR > R102 R103 R104 R105 R106 R107 R108 R109 R112 R113 1-216-001-00 1-216-049-91 1-216-097-91 1-216-093-00 1-216-093-00 1-216-093-00 1-216-093-00 1-216-097-91 1-216-083-00 1-216-083-00 METAL CHIP METAL GLAZE METAL GLAZE METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL GLAZE METAL CHIP METAL CHIP 10 1K 100K 68K 68K 68K 68K 100K 27K 27K 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W
10% 20%
20%
5% 5%
10% 5% 5%
-- 79 --
BD
Ref. No. R114 R115 R116 R117 R118 R119 R120 R121 R122 R123 R124 R125 R126 R127 R128 R129 R130 R131 R132 R133 R134 R135 R136 R137 R138 R139 R140 R141 R142 R143 R144 R145 R146 R147 R148 R149 R150 R151 R152 R153 R154 R156 R157 R158
HP
Part No. 1-216-101-00 1-216-101-00 1-216-061-00 1-216-069-00 1-216-049-91 1-216-089-91 1-216-089-91 1-216-114-00 1-216-097-91 1-216-099-00 1-216-091-00 1-216-069-00 1-216-063-91 1-216-089-91 1-216-105-91 1-216-049-91 1-216-079-00 1-216-079-00 1-216-061-00 1-216-061-00 1-216-065-00 1-216-065-00 1-216-073-00 1-216-065-00 1-216-049-91 1-216-033-00 1-216-081-00 1-216-061-00 1-216-061-00 1-216-121-91 1-216-073-00 1-216-097-91 1-216-097-91 1-216-049-91 1-216-049-91 1-216-049-91 1-216-037-00 1-216-037-00 1-216-037-00 1-216-082-00 1-216-065-00 1-216-085-00 1-216-069-00 1-216-001-00 Description METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL GLAZE METAL GLAZE METAL GLAZE METAL GLAZE METAL GLAZE METAL CHIP METAL CHIP METAL CHIP METAL GLAZE METAL GLAZE METAL GLAZE METAL GLAZE METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL GLAZE METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL GLAZE METAL CHIP METAL GLAZE METAL GLAZE METAL GLAZE METAL GLAZE METAL GLAZE METAL CHIP METAL CHIP METAL CHIP METAL GLAZE METAL CHIP METAL CHIP METAL CHIP METAL CHIP 150K 150K 3.3K 6.8K 1K 47K 47K 510K 100K 120K 56K 6.8K 3.9K 47K 220K 1K 18K 18K 3.3K 3.3K 4.7K 4.7K 10K 4.7K 1K 220 22K 3.3K 3.3K 1M 10K 100K 100K 1K 1K 1K 330 330 330 24K 4.7K 33K 6.8K 10 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Remark 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W Ref. No. Part No. Description < SWITCH > S101 1-572-085-11 SWITCH, LEAF (LIMIT) < VIBRATOR > X101 1-579-280-11 VIBRATOR, CRYSTAL (16.9344MHz) Remark
************************************************************** * 1-659-331-11 HP BOARD ******** < CAPACITOR > C520 C521 C640 C641 C642 C643 C644 C645 C646 C647 C648 C649 C650 C651 C652 1-162-306-11 1-162-306-11 1-162-306-11 1-124-257-00 1-162-294-31 1-162-282-31 1-162-290-31 1-124-465-00 1-162-282-31 1-162-282-31 1-124-257-00 1-124-589-11 1-124-589-11 1-162-306-11 1-162-306-11 CERAMIC CERAMIC CERAMIC ELECT CERAMIC CERAMIC CERAMIC ELECT CERAMIC CERAMIC ELECT ELECT ELECT CERAMIC CERAMIC < CONNECTOR > * CN513 1-568-935-11 PIN, CONNECTOR 8P < IC > IC601 8-759-634-51 IC M5218AP < JACK > J501 J601 1-770-226-11 JACK (LARGE TYPE)(PHONES) 1-770-226-11 JACK (LARGE TYPE)(MIX MIC) < RESISTOR > R640 R641 R642 R643 R644 R645 R646 R647 1-249-429-11 1-249-441-11 1-249-417-11 1-249-417-11 1-249-435-11 CARBON CARBON CARBON CARBON CARBON 10K 100K 1K 1K 33K 10K 120K 100 5% 5% 5% 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 0.01uF 0.01uF 0.01uF 2.2uF 0.001uF 100PF 470PF 0.47uF 100PF 100PF 2.2uF 47uF 47uF 0.01uF 0.01uF 30% 30% 30% 20% 10% 10% 10% 20% 10% 10% 20% 20% 20% 30% 30% 16V 16V 16V 50V 50V 50V 50V 50V 50V 50V 50V 16V 16V 16V 16V
F F
< VARIABLE RESISTOR > RV101 RV102 RV103 1-241-396-11 RES, ADJ, METAL GLAZE 22K 1-241-396-11 RES, ADJ, METAL GLAZE 22K 1-241-396-11 RES, ADJ, METAL GLAZE 22K 1-249-429-11 CARBON 1-247-881-00 CARBON 1-247-807-31 CARBON
**************************************************************
-- 80 --
JOG
Ref. No. * Part No. Description Remark Ref. No. S1002 S1003 S1004 S1005 S1006 0.01uF 0.01uF 0.01uF 0.01uF 30% 30% 30% 30% 16V 16V 16V 16V S1008 S1009
LEAF SWITCH
Part No. 1-692-832-11 1-572-248-11 1-571-281-21 1-571-281-21 1-572-248-11 Description
LOADING
MAIN
Remark
1-659-333-11 JOG BOARD ********* < CAPACITOR > C524 C525 C526 C527 1-162-306-11 1-162-306-11 1-162-306-11 1-162-306-11 CERAMIC CERAMIC CERAMIC CERAMIC < DIODE > * D582 8-719-812-44 DIODE TLO124 (ENTER/NEXT) < RESISTOR > R511 R512 R513 R514 R560 R582 1-249-409-11 1-249-411-11 1-249-413-11 1-249-415-11 1-249-417-11 CARBON CARBON CARBON CARBON CARBON 220 330 470 680 1K 150 5% 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W F F F F F
SWITCH, PUSH (1 KEY)(B PLAY) SWITCH, LEAF (A HALF) SWITCH, LEAF (A CrO2) SWITCH, LEAF (REC A) SWITCH, LEAF (B HALF)
1-571-281-21 SWITCH, LEAF (B CrO2) 1-571-281-21 SWITCH, LEAF (REC B)
************************************************************** 1-650-836-11 LOADING BOARD ************* < CONNECTOR > * CN291 1-568-943-11 PIN, CONNECTOR 5P < SWITCH > S291 S292 1-572-086-11 SWITCH, LEAF (LOAD OUT) 1-572-086-11 SWITCH, LEAF (LOAD IN)
1-249-407-11 CARBON < SWITCH >
************************************************************** * S511 S512 S513 S514 S560 S561 S562 1-554-303-21 1-554-303-21 1-554-303-21 1-554-303-21 1-554-303-21 SWITCH, TACTILE (FREQUENCY -) SWITCH, TACTILE (FREQUENCY +) SWITCH, TACTILE (ENTER/NEXT) SWITCH, TACTILE (DBFB) SWITCH, TACTILE (KARAOKE PON/MPX) A-4389-425-A MAIN BOARD, COMPLETE (AEP,UK) ***************************** A-4389-426-A MAIN BOARD, COMPLETE (G,IT) ************************* A-4389-427-A MAIN BOARD, COMPLETE (EE) ************************* A-4389-428-A MAIN BOARD, COMPLETE (E,EA,HK,MY,SP,TW) *************************************** A-4389-429-A MAIN BOARD, COMPLETE (JE) ************************* A-4390-120-A MAIN BOARD, COMPLETE (TH) ************************* A-4390-506-A MAIN BOARD, COMPLETE (IA) ************************ 1-537-770-21 TERMINAL BOARD, GROUND 7-685-646-79 SCREW +BVTP 3X8 TYPE2 N-S < CAPACITOR > 390 390 560 1.3K 300 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W F F F C201 C202 C203 C204 C205 C206 C207 C208 1-126-961-11 1-162-600-11 1-124-472-11 1-162-282-31 1-162-282-31 ELECT CERAMIC ELECT CERAMIC CERAMIC 2.2uF 0.0047uF 470uF 100PF 100PF 0.01uF 0.01uF 0.01uF 20% 30% 20% 10% 10% 30% 30% 30% 50V 16V 10V 50V 50V 16V 16V 16V
*
* 1-467-869-11 ENCODER, ROTARY (VOLUME) 1-467-968-11 ENCODER, ROTARY (MULTI FUNCTION CONTROL) * ************************************************************** * 1-650-669-11 LEAF SWITCH BOARD ***************** < CONNECTOR > * CN1001 1-568-854-11 SOCKET, CONNECTOR 11P * < TRANSISTOR > Q1001 Q1002 8-749-010-90 TRANSISTOR PHOTO REFLECTOR NJL5165KA-H 8-749-010-90 TRANSISTOR PHOTO REFLECTOR NJL5165KA-H < RESISTOR > R1001 R1002 R1003 R1004 R1005 1-249-412-11 1-249-412-11 1-249-414-11 1-247-834-11 1-247-818-11 CARBON CARBON CARBON CARBON CARBON < SWITCH > S1001 1-692-832-11 SWITCH, PUSH (1 KEY)(A PLAY) *
*
1-162-306-11 CERAMIC 1-162-306-11 CERAMIC 1-162-306-11 CERAMIC
-- 81 --
MAIN
Ref. No. C209 C251 C252 C301 C302 C303 C305 C306 C307 C308 C309 C310 C351 C352 C353 C355 C356 C357 C358 C359 C360 C401 C402 C403 C404 C405 C701 C702 C703 C704 C705 C706 C707 C708 C710 C713 C720 C789 C810 C811 C821 C825 C871 C901 C902 C903 C904 C905 C906 C907 Part No. Description 1000uF 2.2uF 0.0047uF 0.0047uF 470PF 0.1uF 1uF 0.47uF 10uF 10uF 1uF 100uF 0.0047uF 470PF 0.1uF 1uF 0.47uF 10uF 10uF 1uF 100uF 0.1uF 0.1uF 0.1uF 100uF 1000uF 0.01uF 1000uF 10uF 0.1uF 0.1uF 22uF 20PF 20PF 0.01uF 0.01uF 0.1uF 220uF 0.01uF 0.01uF 220PF 1uF 220PF 0.22uF 0.22uF 0.068uF 0.068uF 0.018uF 0.018uF 0.0056uF 20% 20% 30% 5% 10% 20% 20% 20% 20% 20% 20% 5% 10% 20% 20% 20% 20% 20% 20% Remark 16V 50V 16V 50V 50V 50V 50V 50V 50V 50V 50V 10V 50V 50V 50V 50V 50V 50V 50V 50V 10V 50V 50V 50V 16V 35V 16V 10V 50V 50V 50V 50V 50V 50V 16V 16V 50V 10V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V Ref. No. C908 C909 C910 C911 C912 C913 C914 C915 C930 C931 C933 C935 C936 C938 C939 C940 C951 C952 C953 C954 C955 C956 C957 C958 C959 C960 C961 C962 C963 C964 C965 C1001 C1002 C1003 C1005 C1006 C1007 C1008 C1009 C1010 C1011 C1012 C1013 C1014 C1015 C1016 C1017 C1018 C1019 C1020 C1021 Part No. 1-130-479-00 1-130-474-00 1-126-964-11 1-126-964-11 1-136-165-00 1-136-165-00 1-126-964-11 1-162-600-11 1-164-159-11 1-136-153-00 1-124-902-00 1-164-159-11 1-126-964-11 1-162-290-31 1-126-967-11 1-126-967-11 1-136-169-00 1-136-169-00 1-136-495-11 1-136-495-11 1-136-156-00 1-136-156-00 1-130-480-00 1-130-479-00 1-130-474-00 1-126-964-11 1-126-964-11 1-136-165-00 1-136-165-00 1-126-964-11 1-162-600-11 1-126-768-11 1-126-768-11 1-126-964-11 1-126-964-11 1-126-933-11 1-126-933-11 1-126-933-11 1-162-306-11 1-136-165-00 1-136-165-00 1-126-964-11 1-126-916-11 1-126-964-11 1-126-964-11 1-126-952-11 1-126-925-11 1-126-943-11 1-126-934-11 1-126-947-11 Description MYLAR MYLAR ELECT ELECT FILM FILM ELECT CERAMIC CERAMIC FILM ELECT CERAMIC ELECT CERAMIC ELECT ELECT FILM FILM FILM FILM FILM FILM MYLAR MYLAR MYLAR ELECT ELECT FILM FILM ELECT CERAMIC ELECT ELECT ELECT ELECT ELECT ELECT ELECT CERAMIC FILM FILM ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT 0.0047uF 0.0018uF 10uF 10uF 0.1uF 0.1uF 10uF 0.0047uF 0.1uF 0.01uF 0.47uF 0.1uF 10uF 470PF 47uF 47uF 0.22uF 0.22uF 0.068uF 0.068uF 0.018uF 0.018uF 0.0056uF 0.0047uF 0.0018uF 10uF 10uF 0.1uF 0.1uF 10uF 0.0047uF 2200uF 2200uF 10uF 10uF 100uF 100uF 100uF 0.01uF 0.1uF 0.1uF 10uF 1000uF 10uF 10uF 1000uF 470uF 2200uF 220uF 47uF 10uF 5% 5% 20% 20% 5% 5% 20% 30% 5% 20% 20% 10% 20% 20% 5% 5% 5% 5% 5% 5% 5% 5% 5% 20% 20% 5% 5% 20% 30% 20% 20% 20% 20% 20% 20% 20% 30% 5% 5% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Remark 50V 50V 50V 50V 50V 50V 50V 16V 50V 50V 50V 50V 50V 50V 10V 10V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 16V 16V 16V 50V 50V 10V 16V 16V 16V 50V 50V 50V 6.3V 50V 50V 16V 10V 25V 16V 35V 50V
1-126-952-11 ELECT 1-126-961-11 ELECT 1-162-600-11 1-130-479-00 1-162-290-31 1-164-159-11 1-124-903-11 1-124-902-00 1-126-964-11 1-126-964-11 1-124-903-11 1-126-933-11 1-130-479-00 1-162-290-31 1-164-159-11 1-124-903-11 1-124-902-00 1-126-964-11 1-126-964-11 1-124-903-11 1-126-933-11 1-164-159-11 1-164-159-11 1-164-159-11 1-126-933-11 1-126-952-11 1-162-306-11 1-126-926-11 1-126-964-11 1-164-159-11 1-136-165-00 1-126-965-11 CERAMIC MYLAR CERAMIC CERAMIC ELECT ELECT ELECT ELECT ELECT ELECT MYLAR CERAMIC CERAMIC ELECT ELECT ELECT ELECT ELECT ELECT CERAMIC CERAMIC CERAMIC ELECT ELECT CERAMIC ELECT ELECT CERAMIC FILM ELECT
20% 20% 30% 20% 20% 5% 20% 5% 5% 30% 30% 20% 5% 5% 10% 20% 10% 5% 5% 5% 5% 5% 5% 5%
1-162-206-31 CERAMIC 1-162-206-31 CERAMIC 1-162-306-11 CERAMIC 1-162-306-11 1-164-159-11 1-126-923-11 1-136-153-00 1-136-153-00 1-162-286-31 1-109-889-11 1-162-286-31 1-136-169-00 1-136-169-00 1-136-495-11 1-136-495-11 1-136-156-00 1-136-156-00 1-130-480-00 CERAMIC CERAMIC ELECT FILM FILM CERAMIC ELECT CERAMIC FILM FILM FILM FILM FILM FILM MYLAR
1-126-964-11 ELECT
-- 82 --
MAIN
Ref. No. C1022 C1023 C1025 C1026 C1221 C1222 C1223 C1224 C1230 C1235 C1248 C1249 C1250 C1270 C1271 C1272 C1298 C1299 C1300 Part No. 1-126-968-11 1-126-968-11 1-126-925-11 1-126-925-11 1-126-933-11 1-126-923-11 1-126-923-11 1-124-925-11 1-126-974-11 Description ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT 100uF 100uF 470uF 470uF 100uF 220uF 220uF 2.2uF 3300uF 3300uF 0.068uF 0.068uF 0.01uF 0.22uF 0.22uF 0.1uF 0.068uF 0.068uF 0.01uF 20% 20% 20% 20% 20% 20% 20% 20% 20% Remark 50V 50V 10V 10V 10V 10V 10V 100V 50V Ref. No. D1001 D1002 D1002 D1003 D1003 D1004 D1004 D1005 D1005 D1006 D1006 D1007 D1008 D1008 D1009 D1010 D1011 D1013 D1013 D1014 D1014 D1016 D1016 D1017 D1017 D1018 D1018 D1021 D1021 D1022 D1022 D1023 D1059 D1069 D1095 D1096 D1097 D1097 D1098 D1098 D1099 D1099 D1204 D1205 D1230 D1250 D1309 D1310 Part No. Description Remark
8-719-024-99 DIODE 11ES2-NTA2B (EXCEPT IA) 8-719-200-82 8-719-024-99 8-719-200-82 8-719-024-99 8-719-200-82 8-719-024-99 8-719-200-82 8-719-024-99 8-719-200-82 8-719-024-99 8-719-987-63 8-719-001-43 8-719-001-42 8-719-987-63 8-719-987-63 8-719-010-43 8-719-200-82 8-719-024-99 8-719-200-82 8-719-024-99 8-719-200-82 8-719-024-99 8-719-200-82 8-719-024-99 8-719-200-82 8-719-024-99 8-719-200-82 8-719-024-99 8-719-200-82 8-719-024-99 8-719-011-05 8-719-987-63 8-719-987-63 8-719-987-63 8-719-987-63 8-719-200-82 8-719-024-99 8-719-200-82 8-719-024-99 8-719-200-82 8-719-024-99 8-719-987-63 8-719-987-63 8-719-987-63 8-719-028-23 DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 1N4148M DIODE UZL-11M1-TA (IA,TH) DIODE UZL-11M1 (EXCEPT IA,TH) DIODE 1N4148M DIODE 1N4148M DIODE UZ-5.6BSC DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE UZ-27BS DIODE 1N4148M DIODE 1N4148M DIODE 1N4148M DIODE 1N4148M DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 1N4148M DIODE 1N4148M DIODE 1N4148M DIODE D3SBA20-4101
1-126-974-11 ELECT 1-136-495-11 FILM 1-136-495-11 FILM 1-162-306-11 CERAMIC 1-130-781-00 FILM 1-130-781-00 FILM 1-164-159-11 CERAMIC 1-136-495-11 FILM 1-136-495-11 FILM 1-162-306-11 CERAMIC
20% 50V 5% 50V (AEP,UK,G,IT,EE) 5% 50V (AEP,UK,G,IT,EE) 20% 50V (AEP,UK,G,IT,EE) 10% 100V 100V 50V (AEP,UK,G,IT,EE) 5% 50V (AEP,UK,G,IT,EE) 5% 50V (AEP,UK,G,IT,EE) 20% 50V (AEP,UK,G,IT,EE) 10%
< CONNECTOR > CN201 CN401 * CN402 * CN403 * CN404 * CN702 * CN703 * CN703 1-770-067-11 1-568-838-11 1-568-830-11 1-568-449-11 1-568-449-11 CONNECTOR, FFC/FPC 19P SOCKET, CONNECTOR 21P SOCKET, CONNECTOR 11P HOUSING, CONNECTOR(PC BOARD)3P HOUSING, CONNECTOR(PC BOARD)3P
1-568-830-11 SOCKET, CONNECTOR 11P 1-568-832-11 SOCKET, CONNECTOR 13P (TH) 1-568-834-11 SOCKET, CONNECTOR 15P (EXCEPT TH) < DIODE >
D201 D202 D205 D401 D701 D702 D703 D704 D705 D706 D706 D707 D708 D1001
8-719-987-63 8-719-987-63 8-719-010-33 8-719-933-54 8-719-987-63 8-719-987-63 8-719-987-63 8-719-987-63 8-719-987-63 8-719-200-82 8-719-024-99 8-719-987-63 8-719-987-63 8-719-200-82
DIODE 1N4148M DIODE 1N4148M DIODE UZ-4.7BSB DIODE HZS9A2L DIODE 1N4148M DIODE 1N4148M DIODE 1N4148M DIODE 1N4148M DIODE 1N4148M DIODE 11ES2 (IA) DIODE 11ES2-NTA2B (EXCEPT IA) DIODE 1N4148M DIODE 1N4148M DIODE 11ES2 (IA)
8-719-987-63 DIODE 1N4148M 8-719-987-63 DIODE 1N4148M
-- 83 --
MAIN
Ref. No. Part No. Description < FUSE > ! F1601 ! F1602 1-532-504-31 FUSE,TIME-LAG (4.0A 250V) 1-532-504-31 FUSE,TIME-LAG (4.0A 250V) < FUSE HOLDER > FH1001 FH1002 FH1003 FH1004 1-533-217-31 1-533-217-31 1-533-217-31 1-533-217-31 HOLDER, FUSE HOLDER, FUSE HOLDER, FUSE HOLDER, FUSE < IC > IC201 IC401 IC402 IC701 IC702 IC802 IC901 IC1001 IC1002 IC1003 IC1004 IC1202 8-759-822-09 8-759-289-38 8-759-822-09 8-759-392-42 8-759-165-80 8-759-000-48 8-759-331-39 8-759-231-53 8-759-604-86 8-759-604-86 IC LB1641 IC HA12195NT IC LB1641 IC TMP87CS64YF-6397 IC PST600C-T IC MC14052BCP IC M62427FP IC TA7805S IC M5F7807 IC M5F7807 Q1001 Q1002 Q1003 Q1006 Q1204 Q1205 Q1206 Q1207 Q1208 8-729-118-01 8-729-900-36 8-729-030-18 8-729-030-19 8-729-900-63 8-729-900-36 8-729-900-80 8-729-119-76 8-729-119-76 TRANSISTOR 2SB1116 TRANSISTOR DTC124ES TRANSISTOR 2SD2525 TRANSISTOR 2SB1640 TRANSISTOR DTA124ES TRANSISTOR DTC124ES TRANSISTOR DTC114ES TRANSISTOR 2SA1175-HFE TRANSISTOR 2SA1175-HFE < RESISTOR > R201 R202 R203 R206 R207 R208 R209 R210 R251 R252 R301 R302 R303 R304 R305 R306 R307 R308 R309 R310 R351 R352 R354 R355 R356 R357 R358 R359 R360 R401 R402 R403 R404 R405 R406 1-249-415-11 1-249-435-11 1-249-425-11 1-249-425-11 1-249-425-11 1-249-425-11 1-249-413-11 1-249-413-11 1-249-415-11 1-249-435-11 1-249-430-11 1-249-431-11 1-249-432-11 1-249-428-11 1-249-425-11 1-247-840-00 1-249-433-11 1-249-421-11 1-249-428-11 1-249-417-11 1-249-430-11 1-249-431-11 1-249-428-11 1-249-425-11 1-247-840-00 1-249-433-11 1-249-421-11 1-249-428-11 1-249-417-11 1-249-425-11 1-249-425-11 1-249-425-11 1-249-417-11 1-249-437-11 1-249-437-11 CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON 680 33K 4.7K 4.7K 4.7K 4.7K 470 470 680 33K 12K 15K 18K 8.2K 4.7K 2.4K 22K 2.2K 8.2K 1K 12K 15K 8.2K 4.7K 2.4K 22K 2.2K 8.2K 1K 4.7K 4.7K 4.7K 1K 47K 47K 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W F F F F F F F F Remark Ref. No. Q902 Q951 Q952 Q953 Q954 Part No. 8-729-119-78 8-729-119-78 8-729-119-78 8-729-141-26 8-729-141-26 Description TRANSISTOR 2SC403SP-51 TRANSISTOR 2SC403SP-51 TRANSISTOR 2SC403SP-51 TRANSISTOR 2SC3622A-LK TRANSISTOR 2SC3622A-LK Remark
8-759-604-90 IC M5F7907L 8-759-111-68 IC UPC1237HA < JACK >
J801 J1201
1-774-725-11 JACK, PIN 2P (VIDEO (AUDIO)) 1-774-785-11 JACK, PIN 1P (SUPER WOOFER) (E,EA,HK,MY,SP,TW,IA,TH) < COIL >
F F
L1201 L1251
1-420-872-00 COIL, AIR-CORE (AEP,UK,G,IT,EE) 1-420-872-00 COIL, AIR-CORE (AEP,UK,G,IT,EE) < TRANSISTOR >
F F F
Q301 Q351 Q401 Q402 Q403 Q406 Q407 Q408 Q409 Q410 Q411 Q412 Q701 Q820 Q901
8-729-119-78 8-729-119-78 8-729-119-78 8-729-900-65 8-729-801-93 8-729-900-80 8-729-422-57 8-729-119-76 8-729-900-80 8-729-900-65 8-729-900-65 8-729-900-65 8-729-119-78 8-729-422-57 8-729-119-78
TRANSISTOR 2SC403SP-51 TRANSISTOR 2SC403SP-51 TRANSISTOR 2SC403SP-51 TRANSISTOR DTA144ES TRANSISTOR 2SD1387 TRANSISTOR DTC114ES TRANSISTOR UN4111 TRANSISTOR 2SA1175-HFE TRANSISTOR DTC114ES TRANSISTOR DTA144ES TRANSISTOR DTA144ES TRANSISTOR DTA144ES TRANSISTOR 2SC403SP-51 TRANSISTOR UN4111 TRANSISTOR 2SC403SP-51
F F
F F F F F F F
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
-- 84 --
MAIN
Ref. No. R407 R408 R409 R410 R411 R412 R413 R414 R415 R416 R417 R418 R419 R420 R421 R454 R455 R456 R457 R458 R461 R701 R702 R703 R704 R705 R708 R709 R711 R715 R716 R717 R720 R724 R725 R726 R727 R728 R729 R730 R731 R732 R733 R734 R735 R736 R737 R738 R739 R740 Part No. 1-249-437-11 1-249-437-11 1-249-429-11 1-247-882-11 1-247-866-11 1-249-429-11 1-247-864-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-425-11 1-249-425-11 1-249-411-11 1-249-427-11 1-249-429-11 1-249-417-11 1-249-429-11 1-249-437-11 1-249-437-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-429-11 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-249-427-11 1-249-435-11 1-249-415-11 Description CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON 47K 47K 10K 130K 30K 10K 24K 10K 10K 10K 10K 10K 10K 10K 10K 4.7K 4.7K 330 6.8K 10K 1K 10K 47K 47K 10K 10K 10K 10K 10K 10K 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 6.8K 33K 680 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Remark 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W F F F Ref. No. R740 R740 R740 R741 R741 R741 Part No. Description 6.8K 33K 10K 10K 15K 6.8K 5% 5% 5% 5% 5% 5% Remark 1/4W 1/4W (EE) 1/4W (AEP,UK) 1/4W (TH) 1/4W (JE) 1/4W F (EE) 1/4W F (AEP,UK,G,IT) 1/4W F 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W F F (G,IT)
1-249-427-11 CARBON 1-249-435-11 CARBON 1-249-429-11 CARBON 1-249-429-11 CARBON 1-249-431-11 CARBON 1-249-427-11 CARBON
R741 R743 R744 R745 R746 R747 R748 R749 R751 R752 R753 R756 R757 R758 R759 R760 R761 R762 R763 R764 R821 R822 R825 R826 R830 R871 R872 R901 R902 R905 R906 R907