Text preview for : SONY DSC-S85 SERVICE MANUAL LEVEL 2 VER 1.1 2001.08 DIFFERENCES MANUAL (9-929-905-32).pdf part of SONY DSC-S85 SONY DSC-S85
DIGITAL STILL CAMERA.
SERVICE MANUAL VERSION 1.1 2001.08 DIFFERENCES MANUAL.
PART# (9-929-905-32)
Back to : SONY DSC-S85 SERVICE MANU | Home
DSC-S85
SERVICE MANUAL
Level 2
Ver 1.1 2001. 08
US Model Canadian Model AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model
Differences Manual
This Service Manual covers only differences from DSC-S75 (Level 2). In performing repair, refer to DSC-S75 Service Manual (Level 2) (9-929-891-32) as well as this manual.
· Main differences: CCD imager changed (3.4 M pixels t 4.0 M pixels)
(SEE PAGE ss): Pages on the original service manual. : Pages on this service manual. : Points added parts. : Points deleted parts. : Points changed parts.
& ! -
DIGITAL STILL CAMERA
SPECIFICATIONS
System
Image device 8.98 mm (1/1.8 type) color CCD Lens 3× zoom lens f = 7 21 mm (9/32 27/32 inches) (34 102 mm (1 3/8 4 1/8 inches) when converted into a 35 mm still camera) F = 2.0 2.5 Exposure control Automatic exposure, Shutter speed priority, Aperture priority, Manual exposure White balance Automatic, Indoor, Outdoor, One-push Data system Movie: MPEG1 Still: JPEG, GIF (in TEXT mode, Clip Motion), TIFF Audio with still image: MPEG1 (Monaural) Recording medium "Memory Stick" Flash Recommended recording distance (ISO is set to AUTO): 0.3 m to 3.0 m (11 7/8 inches to 9 feet 10 1/8 inches)
Output connector
A/V OUT (Monaural) Minijack Video: 1 Vp-p, 75 unbalanced, sync negative Audio: 327 mV (at a 47 k load) Output impedance: 2.2 k USB jack mini-B External flash jack Minijack
General
Used battery pack NP-FM50 Power requirements 7.2 V Power consumption (during recording) 3.0 W Operation temperature 0°C to 40°C (32°F to 104°F) Storage temperature 20°C to +60°C (4°F to +140°F) Maximum dimensions 117×71×64 mm (4 5/8×2 7/8×2 5/8 inches) (w/h/d) Mass Approx. 462 g (1 lb) (including battery pack NPFM50, "Memory Stick," shoulder strap and lens cap etc.) Built-in microphone Electret condenser microphone Built-in speaker Dynamic speaker
AC-L10A/B/C AC power adaptor
Power requirements 100 to 240 V AC, 50/60 Hz Rated output voltage DC 8.4 V, 1.5 A in operating mode Operation temperature 0°C to 40°C (32°F to 104°F) Storage temperature 20°C to +60°C (4°F to +140°F ) Maximum dimensions 125×39×62 mm (5×1 9/16×2 1/2 inches) (w/h/d) Mass Approx. 280 g (10 oz)
NP-FM50 battery pack
Used battery Lithium ion ba ttery Maximum voltage DC 8.4 V Nominal voltage DC 7.2 V Capacity 8.5 Wh (1 180 mAh)
Accessories
A/V connecting cable (1) NP-FM50 battery pack (1) AC-L10A AC power adaptor (1) Power cord (1) USB cable (1) Lens cap (1) Lens cap strap (1) Shoulder strap (1) "Memory Stick" (16 MB) (1) CD-ROM (USB driver SPVD004) (1) Operating Instructions (1) Design and specifications are subject to change without notice.
LCD screen
Used LCD panel 4.6 cm (1.8 type) TFT (Thin Film Transistor active matrix) drive Total number of dots 123 200 (560×220) dots
2
Ver. 1.1 2001. 08
TABLE OF CONTENTS
Section
5. ADJUSTMENTS
4 4 4 4 4 4 4 6 7 8 9 10 11 11 12 12 13 14 15 16 17 18 19 20 21
Title
Page
5-1. Camera Section Adjustment ............................................ 1-2. Initialization of B, D, E, F, 7, 9 Page Data ........................ 1-2-1. Initialization of D Page Data ....................................... 1. Initializing D Page Data ............................................... 1-2-2. Initialization of B, E, F, 7, 9 Page Data ....................... 1. Initializing B, E, F, 7, 9 Page Data .............................. 5. F Page Table ................................................................ 1-4. Camera System Adjustments .......................................... 1. Flange Back Adjustment (Using the Minipattern Box) ..... 2. Flange Back Adjustment (Using the Flange Back Adjustment Chart) ..................... 3. Flange Back Check .......................................................... 4. Picture Frame Setting ....................................................... 5. F No. Standard Data Input ............................................... 6. Mechanical Shutter Adjustment ....................................... 7. Light Level Adjustment ..................................................... 8. Mixed Color Cancel Adjustment ....................................... 9. Auto White Balance Standard Data Input ........................ 10. Auto White Balance Adjustment ...................................... 11. Smear Compensation Adjustment ................................... 12. Color Reproduction Adjustment ....................................... 13. Color Reproduction Check ............................................... 14. Auto White Balance Check ............................................... 15. CCD White Defect Compensation ................................... 16. CCD Black Defect Compensation .................................... 17. Strobe White Balance Adjustment ...................................
6.
REPAIR PARTS LIST
22 22 22 22 22 23
6-1. Exploded Views ................................................................ 6-1-1. Main Section ................................................................ 6-1-2. Cabinet (Front) Block Assembly ................................. 6-1-3. Lens Block Assembly .................................................. 6-1-4. Cabinet (Rear) Block Assembly .................................. 6-2. Electrical Parts List ..........................................................
3
DSC-S85 SECTION 5 ADJUSTMENTS
5-1. CAMERA SECTION ADJUSTMENT
1-2. INITIALIZATION OF B, D, E, F, 7, 9 PAGE DATA
5. F Page Table Note 1: Fixed data-1: Initialized data. (Refer to "1.Initializing of B, E, F, 7, 9 Page Data") Note 2: Fixed data-2: Modified data. (Refer to "2.Modification of B, E, F, 7, 9 Page Data") Address Initial value 10 to 13 Adjusting page Adjusting Address Initializing Method: Order Page Address Data 1 2 3 4 5 6 0 4 4 4 4 01 03 00 01 02 01 0A 2D 2D Press PAUSE button. Check the data changes to "01". Perform "Modification of D page Data". Procedure D 10 to EF 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1-2-2. Initialization of B, E, F, 7, 9 Page Data 1. Initializing B, E, F, 7, 9 Page Data Note: If the B, E, F, 7, 9 Page data has been initialized, "Modification of B, E, F, 7, 9 Page Data" and following adjustments need to be performed again. 1) Modification of B, E, F, 7, 9 page data 2) Video system adjustments 3) Camera system adjustments Adjusting page Adjusting Address Adjusting page Adjusting Address Adjusting page Adjusting Address Adjusting page Adjusting Address Adjusting page Adjusting Address Initializing Method: Order Page Address Data 1 2 3 4 5 6 0 6 6 6 6 01 03 00 01 02 01 0A 2D 2D Press PAUSE button. Check the data changes to "01". Perform "Modification of B, E, F, 7, 9 page Data". Procedure F 10 to FF E 00 to FF B 00 to FF 7 00 to FF 9 00 to FF 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E to 39 3A 3B 3C 3D 3E 3F 40 41 42 43 44 45 46 47 48 B5 43 03 E9 63 83 D5 FE 73 45 Color reproduction adj. 2F 37 40 D0 Fixed data-1 (Initialized data) Auto white balance adj. Auto white balance standard data input 33 48 DA DF 13 C0 00 00 00 00 00 00 20 20 BA 46 0A 00 85 B0 94 00 00 00 00 00 Fixed data-1 (Initialized data) F No. standard data input Light level adj. Flange back adj. Remark Fixed data-1 (Initialized data)
Ver. 1.1 2001. 08
1-2-1. Initialization of D Page Data 1. Initializing D Page Data Note: If the D page data has been initialized, the following adjustments need to be performed again. 1) Modification of D page data 2) LCD system adjustments
4
Ver. 1.1 2001. 08
Address Initial value 49 to 4C 4D 4E 4F to 58 59 5A 5B 5C 5D 5E 5F 60 to 63 64 65 to 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F 80 81 to 86 87 88 89 8A FF 00 00 00 02 79 F8 10 05 09 B5 07 C4 07 48 06 CB 01 01 01 01 01 2C 3A 2E 40 40 00 10 63 83 03 E9 00 14 28 6E
Remark Fixed data-1 (Initialized data) Strobe white balance adj. Fixed data-1 (Initialized data) Auto white balance standard data input Mechanical shutter adj. Fixed data-1 (Initialized data)
Address Initial value 8B 8C 8D 8E 8F 90 91 92 93 94 95 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Remark
Color reproduction adj.
Flange back adj.
Fixed data-1 (Initialized data) Strobe white balance adj. Fixed data-1 (Initialized data) Strobe white balance adj.
96 97 98 99 9A 9B 9C 9D 9E 9F A0 A1 A2 A3 A4 to A8
Fixed data-1 (Initialized data) 16 1C Fixed data-1 (Initialized data) 00 00 00 00 Fixed data-1 (Initialized data) 2C 06 Fixed data-1 (Initialized data) 80 9E 94 94 94 Fixed data-1 (Initialized data) Mechanical shutter adj. Auto white balance adj. Mixed color cancel adj. Smear compensation adj.
Mechanical shutter adj.
A9 AA AB to D3 D4 D5 D6 D7 D8 D9 to FF
Auto white balance adj. Fixed data-1 (Initialized data)
Flange back adj.
5
Ver. 1.1 2001. 08
1-4. CAMERA SYSTEM ADJUSTMENTS
Before perform the camera system adjustments, check that the specified values of "VIDEO SYSTEM ADJUSTMENTS" are satisfied. Note: For "CAMERA SYSTEM ADJUSTMENTS", perform in order of item numbers. Data setting during camera system adjustments Perform the following data setting before the camera system adjustments. Menu setting: 1) VIDEO OUT of SET UP menu................ NTSC (NTSC mode) (This adjustment must be performed in NTSC mode, so don't set the menu setting to "PAL") Data setting method: Order Page Address Data 1 2 3 4 5 5 6 7 8 9 B 75 00 0 D 2 D D 6 4 6 01 10 10 11 10 C1 06 6C 01 01 Wait for 1 second. Press PAUSE button. 40 81 01 80 Press PAUSE button. Check the bit values of bit3, bit4 and bit5 are "1". (Note 1, 2) Press PAUSE button. Press PAUSE button. Check the data changes to "02". Procedure
Note 1: For the bit values, refer to "5-2. SERVICE MODE", "2-3. 2. Bit value discrimination". Note 2: In case of wrong data, select page: 2, address: 0A and set data: 02. Set the adjusting remote commander to normal LANC, and the power will be turned off and on automatically. Wait for more than 0.167 second after the power on, and set the adjusting remote commander to the service LANC. Then, retry from the step 1. Note 3: Repeat the "Data setting method", if the power was turned off and on during the "CAMERA SYSTEM ADJUSTMENTS". After completing the camera system adjustments, release the data setting: Order Page Address Data 1 2 3 4 5 6 4 6 B D D 0 06 6C 75 11 10 01 00 00 10 00 00 00 Press PAUSE button. Press PAUSE button. Press PAUSE button. Procedure
6
1. Flange Back Adjustment (Using the minipattern box) The flange back of inner focus lens is adjusted automatically. If shifted, the auto focus is disordered. Mode Subject Measurement Point Measuring Instrument Adjustment Page Adjustment Address CAMERA Siemens star chart with ND filter for minipattern box (Note 1) Check operation on the LCD screen F 14 to 25, 87 to 9B
Specified voltage: The specified voltage varies according to the minipattern box, so adjustment the power supply output voltage to the specified voltage written on the sheet which is supplied with the minipattern box.
Below 3 cm Minipattern box Camera Camera table Regulated power supply Output voltage : Specified voltage ± 0.01 Vdc Output current : more than 3.5 A
Note 1: Dark Siemens star chart. Note 2: Check that the data of page: 6, address: 02 is "00". If not, turn the power of unit OFF/ON. Preparations before adjustments: 1) The minipattern box is installed as shown in the following figure. Note 3: The attachment lenses are not used. Note 4: Take care not to hit the mini-pattern box when extending the lens. 2) Install the minipattern box so that the distance between it and the front of lens of camera is less than 3 cm. 3) Make the height of minipattern box and the camera equal. 4) Check the output voltage of the regulated power supply is the specified voltage ± 0.01 Vdc. 5) Check that the center of Siemens star chart meets the center of shot image screen with the zoom lens at TELE end and WIDE end respectively. 6) Check that the data on page: F, address: 14 to 25 and 87 to 9B are initial value (See table below). Address 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 Data 33 48 DA DF 13 C0 00 00 00 00 00 00 20 Address 21 22 23 24 25 87 88 89 8A 8B 8C 8D 8E Data 20 BA 46 0A 00 FF 00 00 00 00 00 00 00 Address 8F 90 91 92 93 94 95 96 97 98 99 9A 9B Data 00 00 00 00 00 00 00 00 00 00 00 00 00 3 4 0 2 3 4 5 6 6 6 6 F
Red (+) Black () Yellow (SENS +) White (SENS ) Black (GND) Need not connected
Fig. 5-1-13
Adjusting method: Order Page Address Data 1 2 01 01 02 87 13 27 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Press PAUSE button. Press PAUSE button. (Note 5) Check the data changes to "01". Check the data changes to "00". Procedure
Note 5: The adjustment data will be automatically input to page: F, address: 14 to 25 and 87 to 9B. Processing after Completing Adjustment: Order Page Address Data 1 6 01 00 Procedure Press PAUSE button. Release the data setting performed at step 2. (Refer to page 5-14) 01 00 Perform"Flange Back Check".
7
Flange Back Adjustment (Using the flange back adjustment chart) The flange back of inner focus lens is adjusted automatically. If shifted, the auto focus is disordered. Mode Subject CAMERA Flange back adjustment chart (2.0 m from the front of the lens) (Luminance: 300 to 400 lux) Check operation on the LCD screen F 14 to 25, 87 to 9B
2.
Adjusting method: Order Page Address Data 1 2 3 4 5 6 6 6 6 F 01 01 02 87 13 15 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Press PAUSE button. Press PAUSE button. (Note 2) Check the data changes to "01". Check the data changes to "00". Procedure
Measurement Point Measuring Instrument Adjustment Page Adjustment Address
Note 2: The adjustment data will be automatically input to page: F, address: 14 to 25 and 87 to 9B. Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 0 01 00 Perform"Flange Back Check". 6 01 00 Procedure Press PAUSE button. Release the data setting performed at step 2. (Refer to page 5-14)
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of unit OFF/ON. Preparations before adjustments: 1) Place the Flange back adjustment chart 2.0 m from the front of the lens. 2) Check that the center of Flange back adjustment chart meets the center of shot image screen with the zoom lens at TELE end and WIDE end respectively. 3) Check that the data on page: F, address: 14 to 25 and 87 to 9B are initial value (See table below). Address 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 Data 33 48 DA DF 13 C0 00 00 00 00 00 00 20 Address 21 22 23 24 25 87 88 89 8A 8B 8C 8D 8E Data 20 BA 46 0A 00 FF 00 00 00 00 00 00 00 Address 8F 90 91 92 93 94 95 96 97 98 99 9A 9B Data 00 00 00 00 00 00 00 00 00 00 00 00 00
8
3.
Flange Back Check CAMERA Siemens star chart (1.0 m from the front of the lens) (Luminance: 200 to 400 lux) Check operation on the LCD screen Focused at the TELE end and WIDE end
Mode Subject
Measurement Point Measuring Instrument Specified value
Checking method: Order Page Address Data Procedure Place the Siemens star 1.0 m from the front of the lens. To open the IRIS , decrease the luminous intensity to the Siemens star up to a point before noise appear on the image. 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Shoot the Siemens star chart with the zoom TELE end. At this time, the center of Siemens star chart should be in the center of the LCD screen. Check that the lens is focused. 6 2C 01 While observe the LCD screen, change the zoom to the WIDE end and check that the lens is focused.
1
2 3
4
5 6 7
Processing after Completing Adjustment: Order Page Address Data 1 2 3 0 01 00 6 2C 00 Release the data setting performed at step 3. (Refer to page 5-14) Procedure
9
4.
Picture Frame Setting CAMERA Color bar chart (Color reproduction adjustment frame with the zoom lens at WIDE end) Video terminal of A/V OUT jack (75 terminated) Oscilloscope and TV monitor A=B, C=D, E=F
How to reset the zoom and focus when they deviated: Order Page Address Data 1 2 3 4 5 6 7 8 6 6 6 6 6 6 6 6 2C 90 91 92 93 01 07 01 00 01 00 00 YL YH 79 (Note 2) (Note 2) Press PAUSE button. Check the data changes to "01". Press PAUSE button. Procedure
Mode Subject
Measurement Point Measuring Instrument Specified Value
Note 1: Displayed data of the page 1 of adjusting remote commander. 1:XX:XX YL data YH data Switch setting: 1) FOCUS ............................................... AF (AUTO FOCUS) Setting method: Order Page Address Data 1 2 3 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Shoot the color bar chart with the zoom WIDE end. Enter the output of VIDEO OUT to the TV monitor, and move to the position as shown in Fig. 5-1-16. Horizontal width of one color (B, C) and that of black (A, D) on the color bar chart should be same. (See Fig. 51-14) With vertical width of black (E, F) set in same, the color bar chart should come to the center of TV monitor. (See Fig. 5-1-15) Check that the color bar on the TV monitor is focused. 0 1 03 22 Note down the YH and YL data. (Note 1) Procedure
Note 2: The data noted down at step 9 of "Setting method". Check on the oscilloscope 1. Horizontal period
A=B B A C=D C D
4
5
Fig. 5-1-14
2. Vertical period
E E=F F
6
7 8 9
V
Fig. 5-1-15
Check on the TV monitor
Processing after Completing Adjustment: Order Page Address Data 1 2 3 0 01 00 0 03 00 Release the data setting performed at step 2 . (Refer to page 5-14) Procedure
Color bar chart picture frame
TV monitor picture frame
Fig. 5-1-16
10
5. F No. Standard Data Input Compensate the unevenness of the iris meter sensitivity. Mode Subject CAMERA Clear chart (Color reproduction adjustment frame with the zoom lens at WIDE end) F 29 to 2D
6. Mechanical Shutter Adjustment Adjust the period which the mechanical shutter is closed, and compensate the exposure. Mode Subject CAMERA Clear chart (Color reproduction adjustment frame with the zoom lens at WIDE end) F 5A, 6C to 7F, D4 to D8
Adjustment Page Adjustment Address
Adjustment Page Adjustment Address
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of unit OFF/ON. Note 2: Refer to "Picture Frame Setting" for YH and YL. Adjusting method: Order Page Address Data 1 2 3 4 5 6 7 8 9 10 11 12 6 6 6 6 6 6 6 6 6 6 2C 90 91 92 93 01 07 01 01 02 00 BB 01 00 00 YL YH 79 (Note 2) (Note 2) Press PAUSE button. Check the data changes to "01". Press PAUSE button. Press PAUSE button. (Note 3) Check the data changes to "01". 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Procedure
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of unit OFF/ON. Note 2: Refer to "Picture Frame Setting" for YH and YL. Adjusting method: Order Page Address Data 1 2 3 4 5 6 7 8 9 10 11 12 13 6 6 6 6 6 6 6 6 6 6 6 2C 90 91 92 93 01 07 01 01 02 AB 00 AD 01 00 00 YL YH 79 (Note 2) (Note 2) Press PAUSE button. Check the data changes to "01". Press PAUSE button. Press PAUSE button. (Note 3) Check the data changes to "01". Check the data changes to "00". 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Procedure
Note 3: The adjustment data will be automatically input to page: F, address: 29 to 2D. Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 5 6 0 01 00 6 6 6 6 01 2C 92 93 00 00 00 00 Release the data setting performed at step 2 . (Refer to page 5-14) Procedure Press PAUSE button.
Note 3: The adjustment data will be automatically input to page: F, address: 5A, 6C to 7F and D4 to D8. Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 5 6 0 01 00 6 6 6 6 01 2C 92 93 00 00 00 00 Release the data setting performed at step 2 . (Refer to page 5-14) Procedure Press PAUSE button.
11
Ver. 1.1 2001. 08
7. Light Level Adjustment Adjust the standard LV value. Mode Subject CAMERA Clear chart (Color reproduction adjustment frame with the zoom lens at WIDE end) Displayed data of page: 1 (Note 3) Adjusting remote commander F 26 to 28 AE level: 0FC0 to 1040 Adjustment Page Adjustment Address Mode Subject CAMERA Color bar chart (Color reproduction adjustment frame with the zoom lens at WIDE end) F A0 to A3 8. Mixed Color Cancel Adjustment To perform mixed color cancel adjustment based on data of each color in color bar.
Measurement Point Measuring Instrument Adjustment Page Adjustment Address Specified Value
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of the unit OFF/ON. Note 2: Refer to "Picture Frame Setting" for YH and YL. Adjusting method: Order Page Address Data 1 2 3 6 6 6 6 6 6 6 6 6 6 6 2C 90 91 92 93 01 07 01 01 01 02 00 D7 D5 01 00 00 YL YH 79 (Note 2) (Note 2) Press PAUSE button. Check the data changes to "01". Press PAUSE button. Press PAUSE button. Press PAUSE button. (Note 3) Check the data changes to "01". 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Procedure
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of the unit OFF/ON. Note 2: Refer to "Picture Frame Setting" for YH and YL. Note 3: The right 4 digits of the page: 1 displayed data of the adjusting remote commander. 1:XX:XX Displayed data Adjusting method: Order Page Address Data 1 2 3 4 5 6 7 8 9 10 11 12 13 14 6 6 6 6 6 6 6 6 6 6 0 1 2C 90 91 92 93 01 07 01 01 02 03 06 Check that the displayed data (Note 3) satisfies the AE level specified value. 00 0D 01 00 00 YL YH 79 (Note 2) (Note 2) Press PAUSE button. Check the data changes to "01". Press PAUSE button. Press PAUSE button. (Note 4) Check the data changes to "01". 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Procedure
4 5 6 7 8 9 10 11 12 13
Note 3: The adjustment data will be automatically input to page: F, address: A0 to A3. Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 5 6 0 01 00 6 6 6 6 01 2C 92 93 00 00 00 00 Release the data setting performed at step 2 . (Refer to page 5-14) Procedure Press PAUSE button.
Note 4: The adjustment data will be automatically input to page: F, address: 26 to 28. Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 5 6 7 0 01 00 0 6 6 6 6 03 01 2C 92 93 00 00 00 00 00 Release the data setting performed atstep 2 . (Refer to page 5-14) Press PAUSE button. Procedure
12
9. Auto White Balance Standard Data Input Adjust the white balance standard data at 3200K. Mode Subject CAMERA Clear chart (Color reproduction adjustment frame with the zoom lens at WIDE end) F 3A to 3D, 59
Adjustment Page Adjustment Address
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of unit OFF/ON. Note 2: Refer to "Picture Frame Setting" for YH and YL. Note 3: "Auto White Balance Standard Data Input" is available only once after the power is turned on. Turn the power off, then on again if the adjustment is retried. Adjusting method: Order Page Address Data 1 2 3 4 5 6 7 8 9 10 11 12 13 6 6 6 6 6 6 6 6 6 6 6 2C 90 91 92 93 01 07 01 01 01 02 00 11 0B 01 00 00 YL YH 79 (Note 2) (Note 2) Press PAUSE button. Check the data changes to "01". Press PAUSE button. Press PAUSE button. Press PAUSE button. (Note 4) Check the data changes to "01". 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Procedure
Note 4: The adjustment data will be automatically input to page: F, address: 3A to 3D and 59. Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 5 6 0 01 00 6 6 6 6 01 2C 92 93 00 00 00 00 Release the data setting performed at step 2 . (Refer to page 5-14) Procedure Press PAUSE button.
13
Ver. 1.1 2001. 08
10. Auto White Balance Adjustment Adjust to the proper auto white balance output data. If it is not correct, auto white balance and color reproducibility will be poor. Mode Subject CAMERA Clear chart (Color reproduction adjustment frame with the zoom lens at WIDE end) Filter C14 for color temperature correction Displayed data of page: 1 (Note 3) Adjusting remote commander F 3F, 40, 80, A9, AA R ratio: 28E0 to 2A20 B ratio: 5D60 to 5EA0 22 23 24 25 26 6 6 6 6 6 01 01 13 01 02 00 11 AE D3 20 21 0 1 03 05 Check that the displayed data (Note 3) satisfies the B ratio specified value. Press PAUSE button. Press PAUSE button. Press PAUSE button. Press PAUSE button. Check the data changes to "01". Order Page Address Data 19 1 Procedure Check that the displayed data (Note 3) satisfies the R ratio specified value.
Filter Measurement Point Measuring Instrument Adjustment Page Adjustment Address Specified Value
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of unit OFF/ON. Note 2: Refer to "Picture Frame Setting" for YH and YL. Note 3: The right 4 digits of the page: 1 displayed data of the adjusting remote commander. 1:XX:XX Displayed data Note 4: "Auto White Balance Adjustment" is available only once after the power is turned on. Turn the power off, then on again if the adjustment is retried. Adjusting method: Order Page Address Data 1 2 3 4 5 6 7 8 9 10 11 12 13 6 6 6 6 6 6 6 6 6 F 2C 90 91 92 93 01 07 01 01 49 4A 4B 4C 49 4A 4B 4C 01 02 01 03 3F 04 29 80 5E 00 A5 00 A7 01 00 00 YL YH 79 (Note 2) (Note 2) Press PAUSE button. Check the data changes to "01". Press PAUSE button. Press PAUSE button. Note down the data. 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Procedure Place the C14 filter on the lens.
Note 5: The adjustment data will be automatically input to page: F, address: 3F, 40, 80, A9 and AA. Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 5 6 7 0 6 6 6 6 6 F 03 01 13 2C 92 93 49 4A 4B 4C 00 00 00 00 00 00 Set the data noted down at step 13, and press PAUSE button. Release the data setting performed at step 3 . (Refer to page 5-14) 0 01 00 Remove the C14 filter on the lens. Press PAUSE button. Press PAUSE button. Procedure
8 9 10
14
F
Press PAUSE button.
15 16 17 18
6 6 6 0
Press PAUSE button. (Note 5) Check the data changes to "01". Press PAUSE button.
14
11. Smear Compensation Adjustment Adjust the smear compensation data from white balance standard data at 3200K. Mode Subject CAMERA Clear chart (Color reproduction adjustment frame with the zoom lens at WIDE end) F 9D, 9E
Adjustment Page Adjustment Address
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of unit OFF/ON. Note 2: Refer to "Picture Frame Setting" for YH and YL. Note 3: "Smear Compensation Adjustment" is available only once after the power is turned on. Turn the power off, then on again if the adjustment is retried. Adjusting method: Order Page Address Data 1 2 3 4 5 6 7 8 9 10 11 12 13 14 6 6 6 6 6 6 6 6 6 6 6 6 2C 90 91 92 93 01 07 01 01 13 01 02 00 11 AE D1 01 00 00 YL YH 79 (Note 2) (Note 2) Press PAUSE button. Check the data changes to "01". Press PAUSE button. Press PAUSE button. Press PAUSE button. Press PAUSE button. (Note 4) Check the data changes to "01". 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Procedure
Note 4: The adjustment data will be automatically input to page: F, address: 9D and 9E. Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 5 6 7 0 01 00 6 6 6 6 6 01 13 2C 92 93 00 00 00 00 00 Release the data setting performed at step 2. (Refer to page 5-14) Procedure Press PAUSE button. Press PAUSE button.
15
Ver. 1.1 2001. 08
12. Color Reproduction Adjustment Adjust the color separation matrix coefficient so that proper color reproduction is produced. Mode Subject CAMERA Color bar chart (Color reproduction adjustment frame with the zoom lens at WIDE end) F 41 to 48, 5C to 5F Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 5 6 7 0 01 00 Perform "Color Reproduction Check". 6 6 6 6 01 2C 92 93 00 00 00 00 Release the data setting performed at step 2 . (Refer to page 5-14) Procedure
Press PAUSE button.
Adjustment Page Adjustment Address
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of the unit OFF/ON. Note 2: Refer to "Picture Frame Setting" for YH and YL. Note 3: "Color Reproduction Adjustment" is available only once after the power is turned on. Turn the power off, then on again if the adjustment is retried. Adjusting method: Order Page Address Data 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 6 6 01 02 A9 6 12 00 Wait for 2 seconds. Press PAUSE button. (Note 4) Check the data changes to "01". 6 6 6 6 6 6 6 6 6 6 2C 90 91 92 93 01 07 01 01 12 00 AB 80 Wait for 1 second. 01 00 00 YL YH 79 (Note 2) (Note 2) Press PAUSE button. Check the data changes to "01". Press PAUSE button. Press PAUSE button. 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Procedure
Note 4: The adjustment data will be automatically input to page: F, address: 41 to 48 and 5C to 5F.
16
Ver. 1.1 2001. 08
13. Color Reproduction Check Mode Subject CAMERA Color bar chart (Color reproduction adjustment frame with the zoom lens at WIDE end) Video terminal of A/V OUT jack (75 terminated) Vectorscope All color luminance points should settle within each color reproduction frame. Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 5 6 6 6 6 6 6 E 01 10 2C 92 93 52 00 00 00 00 00 Set the data noted down at step 12, and press PAUSE button. Release the data setting performed at step 2 . (Refer to page 5-14) 0 01 00 Procedure Press PAUSE button.
Measurement Point Measuring Instrument Specified Value
7 8
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of the unit OFF/ON. Note 2: Refer to "Picture Frame Setting" for YH and YL. Adjusting method: Order Page Address Data 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 6 12 00 Wait for 2 seconds. Check the each color luminance point is in each color reproduction frame. 6 6 6 6 6 6 6 6 6 E E 6 6 2C 90 91 92 93 01 07 01 10 52 52 01 12 09 0F 80 Wait for 1 second. 00 01 Note down the data. Press PAUSE button. Press PAUSE button. 01 00 00 YL YH 79 (Note 2) (Note 2) Press PAUSE button. Check the data changes to "01". Press PAUSE button. 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Procedure
R-Y
R
MG
YE B-Y B
CY G
Burst position
Fig. 5-1-17
17
Ver. 1.1 2001. 08
14. Auto White Balance Check Mode Subject CAMERA Clear chart (Color reproduction adjustment frame with the zoom lens at WIDE end) Displayed data of Video terminal of Page: 1 A/V OUT jack (Note 3) (75 terminated) Adjusting remote Vectorscope commander R ratio: 3E00 to 4200 B ratio: 3E00 to 4200 Fig. 5-1-18 (A) and (B) OUTDOOR luminance check 20 21 22 23 24 E E 6 4B 4B 01 20 3F Place the C14 filter on the lens. Note down the data. Press PAUSE button. Press PAUSE button. Check that the center of the white luminance point settles in the circle shown Fig. 5-1-18 (B).
Measurement Point
Measuring Instrument Specified Value
Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 5 6 0 6 6 6 6 E 03 01 2C 92 93 4B 00 00 00 00 00 Set the data noted down at step 21, and press PAUSE button. Set the data noted down at step 12, and press PAUSE button. Release the data setting performed at step 3 . (Refer to page 5-14) 0 01 00 Remove the C14 filter on the lens.
R-Y
Procedure Press PAUSE button.
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of unit OFF/ON. Note 2: Refer to "Picture Frame Setting" for YH and YL. Note 3: The right 4 digits of the page: 1 displayed data of the adjusting remote commander. 1:XX:XX Displayed data Checking method: Order Page Address Data 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 6 6 6 6 6 6 6 6 E E 6 0 1 0 1 03 05 Check that the displayed data (Note 3) satisfied the B ratio specified value. Check that the center of the white luminance point within the circle shown Fig. 5-1-18 (A). 2C 90 91 92 93 01 07 01 52 52 01 03 0E 0F 04 Check that the displayed data (Note 3) satisfied the R ratio specified value. 00 01 00 00 YL YH 79 (Note 2) (Note 2) Press PAUSE button. Check the data changes to "01". Press PAUSE button. Note down the data. Press PAUSE button. Press PAUSE button. 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Procedure Check that the lens is not covered with either filter.
7
E
52
8 9 10
4 mm
B-Y
4 mm
INDOOR data check (without ND filter)
Fig. 5-1-18 (A)
R-Y 1 mm B-Y 1.5 mm 6 mm
INDOOR luminance point check 19
6 mm
Fig. 5-1-18 (B)
18
Ver. 1.1 2001. 08
15. CCD White Defect Compensation Mode Subject Measurement Point Measuring Instrument Adjustment Page Adjustment Address CAMERA Not required Displayed data of page: 6, address: 55 Adjusting remote commander 7 88 to A3
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of unit OFF/ON. Adjusting method: Order Page Address Data 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 F F F F 6 6 6 6 F F 6 6 6 DE DE E3 E3 01 02 55 01 DE E3 01 02 55 00 0F 60 87 0E 8B 1E 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Note down the data. Press PAUSE button. Note down the data. Press PAUSE button. Press PAUSE button. (Note 2) Check the data changes to "01". Check the data. 00 to 7F: Normal 80 to FF: Defective Press PAUSE button. Press PAUSE button. Press PAUSE button. Press PAUSE button. Check the data changes to "01". Check the data changes to "00". Procedure
Note 2: The adjustment data will be automatically input to page: 7, address: 88 to A3. Processing after Completing Adjustment: Order Page Address Data 1 2 6 F 01 E3 00 Procedure Press PAUSE button. Set the data noted down at step 5, and press PAUSE button. Set the data noted down at step 3, and press PAUSE button. Release the data setting performed at step 2 . (Refer to page 5-14) 0 01 00
3
F
DE
4 5
19
16. CCD Black Defect Compensation Mode Subject CAMERA Clear chart (Color reproduction adjustment frame) Displayed data of page: 6, address: 55 Adjusting remote commander 7 60 to 87
Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 5 6 6 6 6 F 01 2C 30 91 DF 00 00 00 00 Set the data noted down at step 3, and press PAUSE button. Release the data setting performed at step 2 . (Refer to page 5-14) 0 01 00 Procedure Press PAUSE button.
Measurement Point Measuring Instrument Adjustment Page Adjustment Address
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of unit OFF/ON. Note 2: Check that there are no dust, no dirt and reflection of the clear chart. Note 3: Any subject other than the clear chart should be in the screen. Adjusting method: Order Page Address Data 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 F F 6 6 6 6 6 6 6 6 6 6 6 6 F 6 6 6 DF DF 2C 90 91 92 93 01 30 07 01 02 55 01 DF 01 02 55 00 5A 89 8D 4C 01 00 03 00 00 79 01 Check the data changes to "01". Press PAUSE button. (Note 4) Check the data changes to "01". Check the data. 00 to 0A: Normal 0B to FF: Defective Press PAUSE button. Press PAUSE button. Press PAUSE button. Check the data changes to "01". Check the data changes to "00". Press PAUSE button. 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Note down the data. Press PAUSE button. Procedure
6 7
Note 4: The adjustment data will be automatically input to page: 7, address: 60 to 87.
20
17. Strobe White Balance Adjustment Adjust the white balance when the strobe light flashed. Mode Subject Adjustment Page Adjustment Address Specified Value CAMERA Flash adjustment box (Note 3) (1.0 m from the front of the lens) F 4D, 4E, 64, 69 to 6B Y level data: 60 to 94 (Note 4) R-Y level data: FA to FF or 00 to 06 (Note 5) B-Y level data: FA to FF or 00 to 06 (Note 5)
Adjusting method: Order Page Address Data 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 6 6 7 6 02 01 03 01 00 05 B9 6 6 6 02 01 01 00 67 6 6 6 6 6 6 6 6 90 91 92 93 2C 01 07 01 67 00 00 FF FF 01 79 Press PAUSE button. Check the data changes to "01". Press PAUSE button. Check the flashing of strobe light. Check the data changes to "01". Press PAUSE button. Press PAUSE button. Check the flashing of strobe light. Check the data changes to "01". Press PAUSE button. Press PAUSE button. Press PAUSE button. (Note 7) Check the flashing of strobe light. 6 6 7 6 02 01 03 01 00 04 67 Check the data changes to "01". Press PAUSE button. Press PAUSE button. Press PAUSE button. Check the flashing of strobe light. 6 F 0 1 02 64 03 02 Check the R-Y and B-Y level data (Note 5) satisfies the specified value. Check the data changes to "01". Check that the data satisfies the Y level data satisfied value. (Note 4) 0 01 01 Perform "Data setting during camera system adjustments". (Refer to page 5-14) Procedure
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the power of unit OFF/ON. Note 2: Perform this adjustment in the Flash adjustment box. Note 3: Refer to "4. Preparing the Flash adjustment box". (See page 5-7) Note 4: Displayed data of page: F, address: 64, of the adjusting remote commander. F:XX:64 Y level data Note 5: The right four digits of the page: 1 displayed data of the adjusting remote commander. 1:XX:XX B-Y level data R-Y level data Note 6: "Strobe White Balance Adjustment" is available only once after the power is turned on. Turn the power off, then on again if the adjustment is retried. Switch setting: 1) FLASH ........................ ON
21 22 23 24 25 26 27 28 29
Note 7: The adjustment data will be automatically input to page: F, address: 4D, 4E, 64 and 69 to 6B. Processing after Completing Adjustment: Order Page Address Data 1 2 3 4 5 6 7 0 01 00 0 6 6 6 6 03 01 2C 92 93 00 00 00 00 00 Release the data setting performed at step 2 . (Refer to page 5-14) Press PAUSE button. Procedure
21
DSC-S85 SECTION 6 REPAIR PARTS LIST
6-1. EXPLODED VIEWS
6-1-1. MAIN SECTION (Service manual page 6-1)
DSC-S75
Ref. No. 1 2 3 4 Part No. 3-069-158-01 3-069-159-01 X-3951-668-1 3-068-640-01 Description PROCESS, (M2) INTERIOR LOCK PROCESS, (M2) INTERIOR LOCK HOLDER ASSY, BATTERY LID, BATTERY Remark Ref. No. 1 2 3 4 Part No. 3-719-381-01 3-069-159-11 X-3951-783-1 3-068-640-11
DSC-S85
Description SCREW (M2X4) PROCESS, (M2) INTERIOR LOCK HOLDER ASSY, BATTERY LID, BATTERY Remark
6-1-2. CABINET (FRONT) BLOCK ASSEMBLY (Service manual page 6-2) : Points deleted portion. 77 75
!
79 78 79
85
^
SP901
73
#
61 76 79 61
not supplied
61 79 80
DSC-S75
Ref. No. 51 54 55 56 57 58 63 64 65 68 70 85 Part No. 3-068-605-01 3-068-608-01 3-068-603-01 X-3951-665-1 3-068-688-01 3-068-611-01 3-069-158-11 1-476-666-11 X-3951-667-1 X-3951-670-1 Description SCREW, FILTER GRIP COVER, CABINET (FRONT) CABINET (FRONT) ASSY RETAINER, COVER SHAFT COVER, JACK PROCESS, (M2) INTERIOR LOCK SWITCH BLOCK, CONTROL (MODE) CABINET ASSY, UPPER GRILLE ASSY, MICROPHONE Remark Ref. No. 51 54 55 56 57 58 63 64 65 68 70 Part No. 3-068-605-11 3-068-608-11 3-068-603-11 X-3951-781-1 3-068-688-11 3-068-611-11 3-719-381-01 1-476-666-21 X-3951-782-1 X-3951-784-1
DSC-S85
Description SCREW, FILTER GRIP COVER, CABINET (FRONT) CABINET (FRONT) ASSY RETAINER, COVER SHAFT COVER, JACK SCREW (M2X4) SWITCH BLOCK, CONTROL (MODE) CABINET ASSY, UPPER GRILLE ASSY, MICROPHONE Remark
3-069-159-01 PROCESS, (M2) INTERIOR LOCK 3-069-404-01 SPACER, SP
3-069-159-11 PROCESS, (M2) INTERIOR LOCK
6-1-3. LENS BLOCK ASSEMBLY (Service manual page 6-3)
DSC-S75
Ref. No. 104 106 IC151 Part No. Description Remark Ref. No. 104 106 IC151 Part No.
DSC-S85
Description Remark
1-758-437-11 FILTER BLOCK, OPTICAL A-7074-888-A SY-68 BOARD, COMPLETE (SERVICE) A-7031-268-A CCD BLOCK ASSY (CCD IMAGER)(Note)
1-758-618-11 FILTER BLOCK, OPTICAL A-7096-838-A SY-68 BOARD, COMPLETE (SERVICE) A-7031-289-A CCD BLOCK ASSY (CCD IMAGER)(Note)
6-1-4. CABINET (REAR) BLOCK ASSEMBLY (Service manual page 6-4)
DSC-S75
Ref. No. 157 160 Part No. Description Remark Ref. No. 157 160 Part No.
DSC-S85
Description Remark
X-3951-671-1 CABINET (REAR) ASSY 3-068-654-01 COVER, DC (IN)
X-3951-785-1 CABINET (REAR) ASSY 3-068-654-11 COVER, DC (IN)
22
6-2.
Page
ELECTRICAL PARTS LIST
DSC-S75
Ref. No. Part No. Description ACCESSORIES ************ 3-068-187-01 MANUAL, INSTRUCTION (JAPANESE) (J) 3-068-187-11 MANUAL, INSTRUCTION (ENGLISH) (US, CND, AEP, UK, E, AUS, CN, HK, JE) 3-068-187-21 MANUAL, INSTRUCTION (FRENCH, GERMAN) (CND, AEP, JE) 3-068-187-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (AEP, E, JE) 3-068-187-41 MANUAL, INSTRUCTION (DUTCH, ITALIAN) (AEP) 3-068-187-51 MANUAL, INSTRUCTION (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, CN, HK, JE) 3-068-187-61 MANUAL, INSTRUCTION (SWEDISH, RUSSIAN) (AEP, JE) 3-068-187-71 MANUAL, INSTRUCTION (ARABIC) (E) 3-068-187-81 MANUAL, INSTRUCTION (KOREAN) (KR, JE) Remark Ref. No. Part No.
DSC-S85
Description ACCESSORIES ************ 3-068-188-01 MANUAL, INSTRUCTION (JAPANESE) (J) 3-068-188-11 MANUAL, INSTRUCTION (ENGLISH) (US, CND, AEP, UK, E, AUS, CN, HK, JE) 3-068-188-21 MANUAL, INSTRUCTION (FRENCH, GERMAN) (CND, AEP, JE) 3-068-188-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (AEP, E, JE) 3-068-188-41 MANUAL, INSTRUCTION (DUTCH, ITALIAN) (AEP) 3-068-188-51 MANUAL, INSTRUCTION (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, CN, HK, JE) 3-068-188-61 MANUAL, INSTRUCTION (SWEDISH, RUSSIAN) (AEP, JE) 3-068-188-71 MANUAL, INSTRUCTION (ARABIC) (E) 3-068-188-81 MANUAL, INSTRUCTION (KOREAN) (KR, JE) Remark
6-14
23
DSC-S85
9-929-905-32
Sony EMCS Co. Kohda TEC
24
2001H0500-1 © 2001. 8 Published by PV Customer Center
Reverse
992990532.pdf
Revision History
Ver. 1.0 Date 2001.06 History Official Release Correction (C1 PV01-014) Contents -- S. M. correction: Page 3, Page 4, Page 5, Page 6, Page 12, Page 14, Page 16, Page 17, Page 18, Page 19 S.M. Rev. issued --
1.1
2001.08
Yes