Fujitsu Main Digital IC352 PDP-0040-01.pdf part of Fujitsu 42 inch Plasma Fujitsu Main Digital IC352 PDP-0040-01.pdf, Fujitsu Service Bulletin PDP-0040-01. Checks to main digital board re picture shutdown - Continous flashing red led indicator front panel. text manual preview

Text preview for : Fujitsu Main Digital IC352 PDP-0040-01.pdf part of Fujitsu 42 inch Plasma Fujitsu Service Bulletin PDP-0040-01. Checks to main digital board re picture shutdown - Continous flashing red led indicator front panel.

Back to : Fujitsu Main Digital IC35 | Home

SERVICE BULLETIN
PRODUCT: Plasmavision MODEL: P42HHA10W SUBJECT: Electric components modification

ISSUED: REF.NO.:

19/JUN/2004 PDP-0040-01

PAGE 1/1

FUJITSU GENERAL AMERICA
353 ROUTE 46 WEST FAIRFIELD, NJ 07004 EM: [email protected] TEL: 973-575-0381 FAX: 973-836-0449

1. Symptom
No Power (RED LED 4 times blinking)

2. Reason
Trouble of IC352 of Main/Digital PCB. The wire bonding inside IC352 is disconnected and the voltage is not output.

3. Applicable Models

IC352 Lot No. P2 needs to be replaced Part# 015Y3H. Model Serial No. P42HHA10WS 3000001 3001509 Lot No.

1 Pin

5 Pin

4. Method of measures
Judgment of IC352. 1) LED blinks 4 times when IC352 has a trouble. 2) If 2.5V is input and 1.5V is not output, IC352 is defective. Input : 1 pin Output : 2 pin GND : 3 pin Note : Exchange IC352 with lot P2 at the same time when repairing other troubles.
- END -