4_13.pdf part of Panasonic VDR-M70 Vdr-M50_M70.part1.rar, Panasonic VDR-M50 and VDR-M70 Service manual text manual preview

Text preview for : 4_13.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual

Back to : Vdr-M50_M70.part1.rar | Home

Message
Cannot replace thumbnail on PHOTO scenes.

Cause/condition for message to appear
Appears when a photo thumbnail was selected for change in scene editing menu: The specifications stipulate that the thumbnail of photo cannot be changed. Appears when the number of scenes selected on card has exceeded the upper limit of 999 scenes. Appears when the remaining recordable number of photos is less than 10 during recording. Appears when a card initialized on PC, etc., or a card whose initialization was interrupted before, is loaded. Appears when a damaged card is initialized.

Troubleshooting
Select a video to change the thumbnail.

Cannot select any more scenes CARD ALMOST FULL

Release the selection of unnecessary scenes. Prepare another card, or delete unnecessary photos. Choose "YES" and designate it to initialize the card (deleting all recorded data). Replace the card.

Card error has occurred. Format the card now? Card error has occurred. Formatting is not complete. Card error has occurred. Keep card inside & restart.

Card error.

Card full.

Card full. Cannot execute. Card is not formatted. Format the card now. YES NO

Appears when no photo could be recorded Set the power switch to "POWER on card normally. OFF", and after several seconds, set it to "[CARD]PHOTO". Initialize the card (deleting all recorded data). Appears when the card cannot be Use a dry cloth to clean the card recognized because its terminals are terminals. dirty. Also appears when data other than Replace the card. photos is recorded on card. Appears when the recording capacity of Replace the card, or delete card has reached the limit during unnecessary photos recording. . Appears when a card whose remaining Replace the card, or delete recording capacity is small, and on which unnecessary photos. no photo can be recorded, is loaded. Appears when the remaining capacity of Replace the card, or delete card has reached the recordable limit. unnecessary photos. Appears when an unformatted card or a Choose "YES" and designate it when card formatted on PC was loaded. formatting card (deleting all recorded data).