4_14.pdf part of Panasonic VDR-M70 Vdr-M50_M70.part1.rar, Panasonic VDR-M50 and VDR-M70 Service manual text manual preview

Text preview for : 4_14.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual

Back to : Vdr-M50_M70.part1.rar | Home

Message
Control Information Error.

Cause/condition for message to appear
Appears if mismatch has occurred between the recorded video and the scene information because editing was performed near the limit of disc storage capacity on a device other than VDRM70PP/M50PP; it also appears if the control information file was operated. Also appears when reading or writing from/to recorded file cannot be performed because the disc is dirty.

Troubleshooting
Update the control information. (Start Disc Navigation, press the MENU button, and then execute "Update Control Info." in the "Disc" menu.

Clean the disc, or replace it.
Disc cleaning method:
Use soft cloth to clean from inner to outer circumference in axial direction. [Never use solvent.]

Appears if an attempt is made to record copy-guarded image. The specifications state that copy-guarded image cannot be recorded on VDR-M70PP/M50PP. Data error in a part of image Appears if writing to file cannot be completed normally because power was file. turned off by mistake during video Repair disc now? recording or editing, and an abnormality YES NO in part of the file is recognized. Also appears when condensation occurs on lens or drive of VDR-M70PP/M50PP. Condensation will occur when the VDRM70PP/M50PP is moved from a cold place to a warm place. *3: a) b) c)

COPY PROTECT

Stop trying to record.

Choose "YES" and designate partial repair (automatic repair) of video file. Choosing "NO" will display a message for verifying initialization.*3 Do not execute repair, but set the power switch to "POWER OFF" with the disc loaded, and then leave the VDR-M70PP/M50PP in a dry place until condensation disappears (usually 1-2 hours).

Take care with the following when repairing video file: If the disc is removed while it is being recognized, the repair function of video file will be invalid. If the timing when power is turned off is inappropriate, normal repair may be impossible. If the disc has data that was recorded on a device other than VDR-M70PP/M50PP, normal repair may be impossible. d) The repaired data may be different from the original recorded content because of partial deletion of a defective portion. e) The repaired data (only corrected portion in case of partial repair) will lose the original date/time information because the information for date/time when repair was executed will be added. f) If "all repair" is executed, repair will be made in the order of all videos and all photos, and the timesequential relationship of recorded contents may be lost.