Text preview for : 4_17.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual
Back to : Vdr-M50_M70.part1.rar | Home
Message
Disc is not formatted. If it formats, it becomes possible to use for camera. However, when you record from PC connection terminal, please do not format. Format the disc now? YES NO Disc overheat. Please retry later.
Cause/condition for message to appear
Appears when a brand-new DVD-R disc was loaded.
Troubleshooting
When recording on VDR-M70PP/ M50PP, choose "YES" and designate it. When recording video edited on PC connected via the PC connection terminal, choose "NO" and designate it.*4
Appears when the temperature inside VDR-M70PP/M50PP, or the temperature of disc, is too high, and normal operation cannot be executed.
DPOF is not set to scene
Appears if "Slide Show: DPOF" is specified when a card for which DPOF has not been set is loaded. DPOF scenes over limit. Appears when the number of settable Cannot set DPOF scenes. scenes for DPOF has exceeded 999. DVD-R Disc, Video mode Appears if an attempt is made to change cannot be changed. the Video recording mode of a recorded DVD-R disc. Once even one scene is recorded on a DVD-R disc which has been initialized, the originally designated Video recording mode is specified to be maintained until the final recording on the disc. Also appears after the DVD-R disc has been initialized. END OF DISC Appears if the disc recordable capacity has reached the limit during recording. End scene cannot be divided. Appears when the last image of scene was selected to divide the scene: The specifications state that dividing a scene at its end is not possible. Error has occurred. Appears if the self-diagnosis function of Error code No. ×××× VDR-M70PP/M50PP has detected a Please read the manual. serious problem when power was turned (4-digit alpha-numerals on, or the same trouble occurred three showing the code of trouble consecutive times in modes other than will appear in ××××.) recording.
Set the power switch to "POWER OFF" with the disc loaded, and then leave the VDR-M70PP/M50PP in a well-ventilated place until the inside temperature decreases. Specify "Slide Show: All", or do not try slide show. Release unnecessary DOPF setting on photos when newly setting DPOF. Stop trying to change the Video recording mode, or replace the disc.
Operate VDR-M70PP/M50PP after the message disappears. Replace the disc. Stop trying to divide a scene.
Take note of the 4-digit alphanumerals in ××××, and refer to "4-5 Self-Diagnosis Function and Remedy".
*4: The purpose of formatting DVD-R disc on VDR-M70PP/M50PP is to write to disc a program exclusively for camera recording that is necessary to record images shot by camera in real time (increasing the response from disc). When recording images that were edited using PC on DVD-R disc via the PC connection terminal, do not format the disc: The program used exclusively for camera recording will disable normal recording.