4_20.pdf part of Panasonic VDR-M70 Vdr-M50_M70.part1.rar, Panasonic VDR-M50 and VDR-M70 Service manual text manual preview

Text preview for : 4_20.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual

Back to : Vdr-M50_M70.part1.rar | Home

Message
Scenes over limit. Cannot move scenes.

Cause/condition for message to appear
Appears if an attempt is made to move a scene at the upper limit of 999 scenes registered, or the number of scenes will exceed 999 by moving a scene. [Refer to *1 page 4-12] This message appears during operation process. It will appear when user interrupted any process by pressing the stop/cancel button when processing multiple scenes, etc. Appears when only multiple locked scenes were selected using the Disc Navigation function, and deleting them was attempted. Appears when a card other than SD memory card or MultiMediaCard was loaded. Appears when a type of disc that cannot be used on VDR-M70PP/M50PP was loaded. Appears when a disc recorded in the PAL system was loaded: The VDR-M70PP/ M50PP is exclusively for the NTSC system and does not comply with the PAL system. Appears when the first image of scene was selected to divide the scene: The specifications state that dividing a scene at its top is not possible. Appears when an unformatted or logically damaged disc was loaded. Also appears when a dirty disc was loaded. If the message appears when a normal, formatted disc has been loaded, condensation might have occurred on the lens or drive of VDR-M70PP/M50PP. Condensation will occur when the VDRM70PP/M50PP is moved from a cold place to a warm place.

Troubleshooting
Delete unnecessary scenes before moving scenes.

Stop processing.

Operate VDR-M70PP/M50PP after the message disappears.

There was no scene which can be deleted.

Use the Disc Navigation function to unlock the scenes, and then restart operation. Insert an SD memory card or MultiMediaCard. Check the type of disc and insert a disc usable on VDR-M70PP/M50PP. Use a disc recorded in the NTSC system.

This card cannot be used. Please replace card. This disc cannot be used. Please replace disc. This disc is recorded by the PAL system. Please replace disc.

Top scenes cannot be divided.

Stop trying to divide a scene.

UNFORMAT DISC

Format the disc (deleting all recorded data), or replace the disc. Clean the disc, or replace it. [Refer to page 4-14] Set the power switch to "POWER OFF" with the disc loaded, and then leave the VDR-M70PP/M50PP in a dry place until condensation disappears (usually 1-2 hours).