Text preview for : 4_22a.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual



Back to : Vdr-M50_M70.part1.rar | Home

There are two types of message displayed when the self-diagnosis function detects problems: messages for minor problems, and messages for serious problems. Information: The messages of self-diagnosis function will be displayed until the power switch is set to "POWER OFF" or the disc is removed, regardless of whether there is a minor or serious problem.

(1) Messages for minor problems
These messages appear when troubleshooting is likely possible for the problem detected when power was turned on, following the procedure below. Procedure when message shown in Fig. 4-5-1 appears: Set the power switch to "POWER OFF", reconnect the AC adapter/charger or battery, and then set the power switch to "VIDEO" or "PHOTO (disc)". Procedure when message shown in Fig. 4-5-2 appears: Set the power switch to "POWER OFF", press the DISC EJECT button, and then reinsert the disc. After that, set the power switch to "VIDEO" or "PHOTO (disc)". If the problem is handled by the procedure shown above, servicing is not necessary in almost all cases. However, if the VDR-M70PP/M50PP cannot be restored from the problem or the same problem recurs, appropriate servicing will be required. The information on minor problems will be stored in flash memory as error codes (4-digit alphanumeric characters), whether or not the VDR-M70PP/M50PP is restored from the problems. See "4-5-2 Error codes stored in flash memory" for how to display the stored error codes.

! Error has occurred.

Please restart.

Fig. 4-5-1 Message for Minor Problem (1/2)

!

Error has occurred. Please reinsert a disc.

Fig. 4-5-2 Message for Minor Problem (2/2)