4_25.pdf part of Panasonic VDR-M70 Vdr-M50_M70.part1.rar, Panasonic VDR-M50 and VDR-M70 Service manual text manual preview

Text preview for : 4_25.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual

Back to : Vdr-M50_M70.part1.rar | Home

Table 4-5-1 shows the error codes that are likely to frequently appear, and troubleshooting when they appear. If error codes other than those listed in Table 4-5-1 appear, check with the factory for troubleshooting. Error code
0400 1100

Table 4-5-1 Major Error Codes and Troubleshooting (1/2) Contents of problem Troubleshooting
Recognition of disc failed. Reading of data from disc failed. 1) Set the power switch to "POWER OFF", reattach the battery or AC adapter/charger, and then set the power switch to "VIDEO" or "PHOTO" (disc). Take care not to subject VDR-M70PP/M50PP to impact or vibrations at this time. 2) Set the power switch to "POWER OFF", remove the disc and check whether or not it is dirty, scratched or distorted. If it is dirty, clean it referring to the next page, and then reload it. If it is scratched or distorted, use another disc. Then set the power switch to "VIDEO" or "PHOTO" (disc). 3) Replace the disc without regard as to whether it is dirty, scratched or distorted. Replace the disc. 1) Check the ambient temperature. 2) Set the power switch to "POWER OFF", remove the disc and check whether or not it is dirty, scratched or distorted. If it is dirty, clean it, and then reload it. If it is scratched or distorted, replace the disc. Then set the power switch to "VIDEO" or "PHOTO" (disc).
Disc cleaning method:
Use soft cloth to clean from inner to outer circumference in axial direction. [Never use solvent.]

10AE 10AF 0280 2881

Disc physically damaged, i.g., scratched or distorted. The optical pickup in disc drive unit failed to move. Recognition of disc failed. [This message is likely to appear frequently when the ambient temperature is too low (0°C or less)].

3) Check to see whether or not condensation has occurred. If condensation has occurred, set the power switch to "POWER OFF" with the disc loaded, and then leave the VDR-M70PP/M50PP in a dry place for 1-2 hours. 4) Replace the disc.