4_41a.pdf part of Panasonic VDR-M70 Vdr-M50_M70.part1.rar, Panasonic VDR-M50 and VDR-M70 Service manual text manual preview

Text preview for : 4_41a.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual

Back to : Vdr-M50_M70.part1.rar | Home

If the disc cannot be ejected after performing "4-8-1 Item to be checked", remove it using the procedure in this section. Information: Numbers in diagrams are step numbers of setting procedure, and letters in brackets [ ] show the types of screw. 1) Turn the hood in the direction of the arrow to remove it. 2) Remove three screws [A], and then remove the filter piece, being careful not to scratch the lens surface with screwdriver at this time. 3) Remove the lens cover in the direction of the arrow. 4) Remove the space sheet that covers the opening for operating lock arm. 5) Use a fine-tipped flat-bladed screwdriver, etc. to move the lock arm in the direction of the arrow, and then open the disc cover. Information: When reinstalling removed components, use the reverse procedure to removal.
FILTER PIECE

[A] M1.7x4 (Black)

LENS COVER

1) DISC COVER 2) [A] HOOD LOCK ARM 3)

Fig.4-8-1