Text preview for : 5_10.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual



Back to : Vdr-M50_M70.part1.rar | Home

(10) USB Holder, USB-H/USB Circuit Board, Rear Cover, EVF Unit, and Hand Strap
Note: Before replacing the EVF unit, always perform "(1) BL DET Check" in "6-4-11 EVF". USB Holder (a) and USB-H/USB Circuit Board (b) 1) Remove one screw [F]. 2) Disconnect the USB-H/USB circuit board from MAN-H/MAN circuit board (h). 3) Remove the USB-H/USB circuit board from USB holder in the direction of the arrow. Rear Cover (c) and EVF Unit (d) 4) Remove the hand strap from side case-R (g). 5) Remove one screw [F] and one screw [A]. 6) Disconnect the three flat cables, and then remove the rear cover along with the EVF unit. 7) Remove one screw [A], and then remove the EVF unit. Hand Strap (e) 8) Remove screw [A], screw [D] and screw [M], and then remove the hand strap.

(d) 5) [F] (c) 7) [A] (e) (f) 6) 8) [M]

8) [D] 8) [A] (g) 5) [A]

6)

4)

[A] M1.7x4 (Black)

[D] M1.7x4 (Black)

[F] M1.6x2.5 (Black)

1) [F]
[M] M1.7x3 (Black)

(a) (b) (c) (d) (f) (g) (h)

USB holder USB-H/USB Circuit Board Rear cover EVF unit Hand strap plate Side case-R MAN-H/MAN circuit board

(h)

(a) 2) (b) 3)

Fig. 5-3-13