Text preview for : 5_16.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual



Back to : Vdr-M50_M70.part1.rar | Home

(19) Fulcrum Cover-U, Fulcrum Cover-B and Fulcrum Unit
1) Remove two screws [P], and then remove the fulcrum cover-U (a) and fulcrum cover-B (b) from the fulcrum unit (c).
(a) Fulcrum cover-U (b) Fulcrum cover-B (c) Fulcrum unit

(c)

(b) (a)
1) [P]
[P] M1.6x3 (Black)

Fig. 5-3-23

(20) LCD Case-B and LCD Circuit Board
LCD Case-B (a) 1) Remove the LCD case-B in the direction of the arrow. LCD Circuit Board (b) 2) Disconnect the one flat cable. 3) Release the two tabs, and then remove the LCD circuit board. Be careful not to deform LCD frame (c) at this time.

(a) (c)
1)

2)

3) Tabs

(b)
(1)

(a) LCD case-B (b) LCD circuit board (c) LCD frame

(2) (1) Unlock (2) Pull (1)

Fig. 5-3-24 LCD Case-B and LCD Circuit Board Note: 1) Do not remove the mirror sheet (d), light guide plate (e), diffusion sheet (f), prism sheets (g) or LCD panel (h) from the LCD frame (c). 2) If the mirror sheet, light guide plate, diffusion sheet, prism sheets or LCD panel becomes detached from the LCD frame, assemble them as shown in Fig. 5-3-25.
(c) (d) (e) (f) (g) (h) (f) Silver surface (e) (g) (d) LCD frame Mirror sheet Light guide plate Diffusion sheet Prism sheets LCD panel

(c) (h)

A

B C

A>B>C

White surface

Fig. 5-3-25 Assembling parts inside LCD frame