Text preview for : 6_01.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual
Back to : Vdr-M50_M70.part1.rar | Home
The reference data is necessary for adjustment: The adjustment program will not operate normally without it. Before adjustment, be sure to create the reference data, using the same model (with normal camera block) as the one to be adjusted. See section 6-1-1 and subsequent sections for details. Information: 1) The reference data is used to reduce the difference between environments of servicing site and factory (color temperature of light box, etc.). Using the reference data will increase adjustment accuracy. 2) The reference data is usually created once for each model because it is recorded on hard disk drive (HDD) of PC with the adjustment program. However, creating reference data again is necessary in the following cases: a) When performing adjustment using a light box that is different from that used when the reference data was created. b) When performing maintenance of the light box used when creating the reference data (replacing light, etc.). c) When performing adjustment using a C12 light balancing filter that is different from that used when the reference data was created. d) When deleting the folder containing the adjustment program from HDD.