Text preview for : 6_16.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual
Back to : Vdr-M50_M70.part1.rar | Home
Make sure that the connections are correct, the power switch on DVD video camera/recorder is set to "VIDEO", and the DC power supply for DSP-R jig is turned on. The adjustment program will not start unless the connections for adjustment are correct, and the DVD video camera/recorder or DSPR jig is powered. Information: 1) Display ×××× on subsequent PC screen shows the model name. 2) The numbers on PC screens show the operational procedure.
(1) Start
1) Start the PC. If the PC has already started, terminate all other applications. 2) Start Explorer, and double-click the "MAP2004W.EXE" file in map04w folder to start the adjustment program. 3) Once the adjustment program has started, the COMMUNICATION PORT SETTING screen will appear. 4) Check the communication port to which the RS-232C cable is connected, and then choose the radio button of corresponding port on COMMUNICATION PORT SETTING screen. 5) Click the OK button on the COMMUNICATION PORT SETTING screen, and then proceed with the MODEL SELECT screen. Note: If the dialogs on right appear, perform the following troubleshooting: When the power or connection error dialog appears: A connection is incorrect or power is not turned on. Make sure that all connections are correct and that power is supplied to the reference data creating device or DSP-R interface jig. Clicking the OK button will finish the program: After solving the problem, restart the program. When the communication port error dialog appears: There was a mistake in selecting communication port. Check the communication port. Clicking the OK button will finish the program: Select the communication port again after restart.
COMMUNICATION PORT SETTING screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MANUAL ADJUSTMENT PROGRAM
for SERVICE STATION
COM PORT SETTING
PORT PORT 1 PORT 4 PORT 5 PORT 6
4
PORT 2 PORT 3
5
OK
EXIT
Copyright (C) HITACHI, Ltd 2003
POWER OR CONNECTION ERROR dialog
ERROR
!
MAY OCCURE ON CABLE OR JIG OR CAMCORDER. POWER FAILURE OR CONNECTION ERROR!
OK
COM PORT ERROR dialog
ERROR
!
COM PORT ERROR
OK