Text preview for : 6_17.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual
Back to : Vdr-M50_M70.part1.rar | Home
Information: When communications between the PC and DVD video camera/recorder are normal during adjustment, the word "CONNECTION" in status bar (bottom left) of each screen will flash. 6) Choose the radio button of corresponding model name in MODEL SELECT screen. 7) Click the ENTER button in MODEL SELECT screen, and then proceed with the ADJUST MENU screen. Start of the adjustment program is now complete. Refer to "6-3 Adjustment Procedure" for subsequent operations. If there is an error in model selection, the FILE HANDLE ERROR dialog will appear. Click the OK button, and then choose the correct model. Note: If the FILE HANDLE ERROR dialog appears when the correct model has been chosen, obtain (download) the newest adjustment program, and then start over again.
MODEL SELECT screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL SELECT
××××
××××
××××
××××
6
7
ENTER
EXIT
CONNECTION
ADJUST MENU screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL NAME: ××××
ADJUST MENU
DATA INITIALIZE VIDEO LEVEL BURST LEVEL SAMPLING PULSE AUTO FUCUS AUTO IRIS CONTROL MATRIX CHROMA GAIN SPOT NOISE LCD EVF
(2) Termination
1) Click the RETURN button on MENU screen of adjustment program to return to the MODEL SELECT screen. 2) Click the EXIT button on the MODEL SELECT screen. Information: If the PC does not accept any operation during work, or the reference data creating program does not work, perform the following procedure: 1) Set the power switch of reference data creating device to "OFF". 2) Turn off the DC power supply of DSP-R interface jig. 3) Simultaneously press the Ctrl, Alt and Delete keys on PC keyboard to restart the PC. 4) After the PC restarts, set the power switch of reference data creating device to "VIDEO" and turn on the DC power supply of DSP-R interface jig again. 5) Restart the reference data creating program.
EXECUTE
RETURN
CONNECTION
FILE HANDLE ERROR dialog
ERROR
!
File hundle error. [SYMBOL FILE] OK