Text preview for : 6_23.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual



Back to : Vdr-M50_M70.part1.rar | Home

ADJUST MENU screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION

Preparations: 1) Connect the oscilloscope CH1 to video out. 2) Switch the oscilloscope V-MODE to "CH1" and TRIGGER SOURCE to "CH1". Procedure: 1) Choose VIDEO LEVEL on the ADJUST MENU screen. 2) Click the EXECUTE button on ADJUST MENU screen to proceed with the VIDEO LEVEL ADJUSTMENT screen. 3) Click the UP or DOWN button so that level of waveform is 1.0 ± 0.05 Vp-p. Click the button at approx. 2-second intervals while checking any increase or decrease in level of waveform. 4) After step 3) is complete, be sure to click the SAVE button. Note that clicking the RETURN button will restore the ADJUST MENU screen to the status before the adjustment was performed. 5) When save is complete, the ADJUSTMENT FINISHED dialog will appear: Click the OK button in dialog to restore the ADJUST MENU screen.

MODEL NAME: ××××
ADJUST MENU

DATA INITIALIZE VIDEO LEVEL BURST LEVEL SAMPLING PULSE AUTO FUCUS AUTO IRIS CONTROL MATRIX CHROMA GAIN SPOT NOISE LCD EVF

1

2
CONNECTION

EXECUTE

RETURN

VIDEO LEVEL ADJUSTMENT screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION

VIDEO LEVEL ADJUSTMENT

UP

DOWN

3

4

SAVE

RETURN

1.0V ± 0.05Vp-p
CONNECTION

ADJUSTMENT FINISHED dialog
FINISHED

Fig. 6-4-1

ADJUSTMENT FINISHED. OK

5