Text preview for : 6_44.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual
Back to : Vdr-M50_M70.part1.rar | Home
7) Connect the oscilloscope CH1 to "EVF-B (pin 6)" of Skylark Connection jig. 8) Use the same procedure as in step 3) to equalize levels a and b of the waveform. 9) After step 8) is complete, be sure to click the NEXT button, and then proceed with the SUB BRIGHT BLUE ADJUSTMENT screen. 10) Use the same procedure as in step 3) to equalize levels c and d of the waveform. 11) After step 10) is complete, be sure to click the SAVE button and then proceed with the BL DET screen. Note that clicking the RETURN button will restore the EVF ADJUSTMENT MENU screen to the status before the adjustment was performed. 12) Click either button on the BL DET screen according to the voltage checked in "(1) EVF BL DET Check": "High" button when the check value is 5 V, or "Low" button when it is 0 V. 13) When BL DET is complete, the ADJUSTMENT FINISHED dialog will appear: Click the OK button in dialog to restore the EVF ADJUSTMENT MENU screen. 14) Click the RETURN button in EVF ADJUSTMENT MENU to restore the ADJUST MENU screen.
SUB CONTRAST BLUE ADJUSTMENT screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
SUB CONTRAST BLUE ADJUSTMENT
UP
DOWN
8
9
SAVE
RETURN
CONNECTION
SUB BRIGHT BLUE ADJUSTMENT screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
SUB BRIGHT BLUE ADJUSTMENT
UP
DOWN
10
c
11
NEXT
RETURN
a
CONNECTION
BL DET screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
BL DET
High
Low
d
12
b
CONNECTION
ADJUSTMENT FINISHED dialog
FINISHED ADJUSTMENT FINISHED. OK
13
Fig. 6-4-16 Waveform of White Balance Adjustment