Text preview for : Crest-XR20suplement mix.pdf part of Crest XR20suplement mixer (suplement)
Back to : Crest-XR20suplement mix.p | Home
Crest Audio XR-20 mono input module user options 12-18-01
Direct out mod
Aux Pre Signal Mod
Easy to read instructions located right on the board here....
Cut and remove 0 ohm jumpers R159 and R106 on the mono input main PCB. Add solder blobs to SB4 and SB5 to join the 2 solder pad halves. Now your direct out for this channel is Post-EQ and Pre-fader. If you require a easy pre fader/pre EQ dir out it is possible to utilize the insert send and modify your 1/4" connector for this accordingly so as not to interrupt signal flow to the rest of the module (IE: short tip/ring together).
XR-20/24 block diagram
XR-20 / XR-24 owner's manual
p. 4
JIMI