Text preview for : Infinity-TSS-450-5.1 actspksystem.pdf part of Infinity TSS450-5.1 active speakers system
Back to : Infinity-TSS-450-5.1 acts | Home
ENGLISH
INFINITY Harman Consumer Group International
TOTAL SPEAKER SOLUTIONS
TSS-450
Owner's Guide
SERVICE MANUAL
(230V)
TSS450/230
INFINITY Harman Consumer Group International
k
a
l
b
c
m
d
h
n
e o
p
g q
r
f
k
o
p
q
c
r l
m
h
n
TSS450/230
INFINITY
Harman Consumer Group International
INTRODUCTION PLANNING YOUR SYSTEM
Infinity Total Solutions Before deciding where to best place your speakers, survey your room
Infinity Total Solutions continues Infinity's longstanding and study Figures 1 and 2.
commitment to accurate sound reproduction. Our high-quality
drivers, precision dividing networks and rigid, well-braced Subwoofer
enclosures combine to deliver uncompromised performance in any
multichannel home theater system. Left Right
In addition, these speakers, except for the powered subwoofer, are Front
Channel
Front
Channel
Center
magnetically shielded for safe placement adjacent to a television. Channel
Unpacking the System
Carefully unpack the system. If you suspect damage from
transit, report it immediately to your dealer and/or delivery
service. Keep the shipping carton and packing materials for future Couch
use. Open the package and verify the following contents:
Left Right
Surround Surround
Channel Channel
· Warranty statement · Wire package
Contains:
2 x 12m (2 x 40') Speaker wire
3 x 6m (3 x 15') Speaker wire Figure 1. In this overhead view of a typical installation, satellite
1 x 4.5m (1 x 15') Subwoofer cable speakers are used to reproduce sound for the front and surround
channels.The center channel reproduces sound and dialogue.The
powered subwoofer provides bass for effects and music.
Subwoofer
Right
Front
Channel
(1) Subwoofer
Center
Channel
Right
Surround
Left Channel
Front
Channel
h
uc
Co
(1) Center with base
Left
Surround
Channel
Figure 2.This figure shows an alternative layout, which may be
more suitable for some rooms.
(4) Satellite speakers
(4) Wall brackets for satellites
1 TSS-450 TSS450/230
ENGLISH
INFINITY Harman Consumer Group International
PLACEMENT WALL-MOUNTING THE SATELLITES
NOTE: The satellite speakers can be placed directly on a shelf, The TSS-450 satellites are designed to be mounted on the wall.
or mounted on a wall using the wall brackets included. There is a wall bracket for each satellite speaker.
Each speaker bracket will require (4) 1-1/2," #10 wood screws;
Left and Right Front Channels each screw should be fastened to a wall stud. If a wall stud is
unavailable, install an anchor appropriate for a 1-1/2," #10
For left and right front channels, place one satellite to the left and
screw.
another to the right of the television, as shown in Figure 1.
Since the speakers are magnetically shielded, you can place them
NOTE: The customer is responsible for the correct selection
very close to the TV without worrying about the magnetic field
and use of mounting hardware (available through hardware stores)
distorting the picture.
that will ensure the proper and safe wall-mounting of
the speakers.
Center Channel
For the center channel, place the speaker directly on top of, or Step 1.
below, your television. Use a shelf if the television does not provide Mark the positions on the wall where you would like to place the
a stable platform. mounting screws.
The center channel includes an adjustable rear foot. Simply turn
the foot to extend the length.This will allow you, if necessary, to aim Step 2.
the speaker downward slightly, toward the listening area. Place bracket against wall and fasten four 1-1/2," #10 wood
screws through the bracket's screw holes into the wall. If a wall
Surround Channels stud is not available, use an appropriate anchor.
For left and right surround channels, place one speaker on the left Step 3.
and another on the right, to the side of or slightly behind the Screw the post of the bracket into the 1/4"-20 threaded insert on
listening area.The surround speakers should be mounted at a the back of the satellite.Adjust the satellite to the desired angle
height of between 1.2 and 2 meters. and tighten the knob using the enclosed metal bar.
Subwoofer Figure 3.
Since the installation of a subwoofer can be somewhat more screwhead on the wa
complicated than installing full-range speakers, it is essential that properly, the speaker should slide down s
Metal bar
you read this section very carefully prior to connecting the secure.
subwoofer to your system. Should you have questions relating to
installation, it is advisable to call either your dealer or Infinity's
Customer Service Department for advice.
The performance of the subwoofer is directly related to its
placement in the listening room and how you align the subwoofer
with the satellite speakers. Setting the volume of the subwoofer
in relation to the left and right speakers is also of critical
importance because it is essential that the subwoofer integrate
smoothly with the entire system. Setting the subwoofer's volume
level too high will result in an overpowering, boomy bass. Setting
Bracket on wall.
the volume level too low will negate the benefits of the subwoofer.
Here are several additional facts on installation that may prove
useful. It is generally believed that low frequencies (below 125Hz)
are nondirectional and, therefore, placement of a subwoofer within
any listening room is not critical. While in theory it is true that the
larger wavelengths of extremely low frequencies are basically
nondirectional, the fact is that, when installing a subwoofer within
the limited confines of a room, reflections, standing waves and
absorptions generated within the room will strongly influence the
performance of any subwoofer system.As a result, specific
location of the subwoofer becomes important, and we strongly
recommend that you experiment with placement before choosing a
final location. Placement will depend upon your room (for example,
whether or not your room permits placement of the subwoofer near
either satellite) and the amount and quality of bass required.
TSS-450 2
TSS450/230
ENGLISH
INFINITY Harman Consumer Group International
SUBWOOFER CONTROLS
Rear Panel A Few Suggestions
We recommend that you do not operate your speakers or subwoofer
with the bass, treble and loudness controls set to full boost.
This will place undue strain on your electronics and speakers and
could damage them.
The volume control setting on your processor/preamp or receiver
is not a specific indication of the overall loudness level of the
speakers.The only important consideration is the loudness level
at which the system can be played, regardless of where the volume
control is set.
Always turn down the volume control setting on your processor/
preamp or receiver when changing a cassette or CD, or switching
inputs to AM or FM operation. Excessively loud transients (clicks or
popping sounds) can damage the satellite speakers and possibly the
subwoofer.
Important!
Whenever changing cables, pulling plugs, etc.,ALWAYS TURN OFF
ALL EQUIPMENT, including the subwoofer.
HIGH Level Inputs
LFE Input
Line-Level Inputs
AUTO/ON Switch
Subwoofer Level Control
Power Switch
TSS-450 4
TSS450/230
INFINITY Harman Consumer Group International
SUBWOOFER CONNECTIONS
If you have a Dolby* Digital or DTS® receiver/
processor with a low-frequency-effects (LFE)
or subwoofer output:
Set NORMAL/LFE switch to "LFE."
If your receiver/processor does not contain
a Dolby Digital or DTS processor but has a
subwoofer output:
Set NORMAL/LFE switch to "NORMAL."
NOTE: If your receiver/processor has only one sub out,
you may use either the L or R input.
If your receiver/processor does not have
subwoofer outputs for the left and right channels
or an LFE output:
Receiver/Amplifier
Front Speaker Output
5 TSS-450 TSS450/230
ENGLISH
INFINITY
Harman Consumer Group International
OPERATION
Surround Modes Final Positioning
When using the TSS-450 in a Dolby* Digital or DTS home theater After correctly connecting the TSS-450 system and verifying that
system, make sure all speakers are set to "Small".When using the both the subwoofer and all satellite speakers are playing, it is time
system in a Dolby Pro Logic* home theater system, make sure the to optimize the system for your particular listening room. Earlier,
receiver's center channel mode is set to "Normal." you placed the subwoofer in its general location. Finding the exact
location for optimum performance sometimes only involves moving
Some Dolby Digital-equipped receivers/processors offer different
the speakers up to a few centimeters in any direction. We urge you,
setup options for each source or surround mode, e.g., CD-stereo,
therefore, to experiment with placement, if possible, until your
videotape, Dolby, Pro Logic. In each case, follow your equipment's
speakers deliver their full potential.
instructions to ensure that the subwoofer output is turned on and
that the speakers are set to "Small"in each mode.
If your receiver has adjustable crossover settings, we recommend
the subwoofer crossover be set between 100Hz 120Hz.
MAINTENANCE AND SERVICE
The satellite and subwoofer enclosures may be cleaned using a
Power On soft cloth to remove fingerprints or to wipe off dust.
Plug your subwoofer's AC cord into a wall outlet. Do not use the outlets
on the back of the receiver. All wiring connections should be inspected and cleaned or remade
periodically.The frequency of maintenance depends on the metals
Initially set the Subwoofer Level Control to the"MIN"position. involved in the connections, atmospheric conditions, and other
Turn on the subwoofer by pressing the Power Switch on the factors, but once per year is the minimum.
rear panel.
If a problem occurs, make sure that all connections are properly
Turn on your entire audio system and start a CD or movie made and clean. If a problem exists in one loudspeaker, reverse the
sound-track at a moderate level. connection wires to the left and right system. If the problem
remains in the same speaker, then the fault is with the loud-
Auto On/Stand-By speaker. If the problem appears in the opposite speaker, the cause
With the Power Switch in the AUTO position, the LED on the rear is in another component or cable. In the event that your TSS-450
panel will remain lit in red or green to indicate the On/Stand-By ever needs service, contact your local Infinity dealer or Infinity
mode of the subwoofer. directly at www.infinitysystems.com for a service center near you.
RED = STAND-BY (No signal detected,Amp Off)
GREEN = ON (Signal detected,Amp On)
The subwoofer will automatically enter the Stand-By mode after
approximately 10 minutes when no signal is detected from your
system.The subwoofer will then power ON instantly when a signal
is detected. During periods of normal use, the Power Switch
can be left on.You may turn off the Power Switch for extended
periods of nonoperation, e.g., when you are away on vacation.
Adjust Level
Turn the Subwoofer Level Control up about half way. If no sound
emanates from the subwoofer, check the AC-line cord and input
cables.Are the connectors on the cables making proper contact? Is
the AC plug connected to a "live"receptacle? Has the Power Switch
been pressed to the "On"position? Once you have confirmed
that the subwoofer is active, proceed by playing a CD or DVD.
Use a selection that has ample bass information.
Set the overall volume control of the receiver/processor to a
comfortable level.Adjust the Subwoofer Level Control until
you obtain a pleasing blend of bass. Bass response should not
overpower the room but rather be adjusted so there is a harmonious
blend across the entire musical range. Many users have a tendency
to set the subwoofer volume too loud, adhering to the belief that a
subwoofer is there to produce lots of bass.This is not entirely true.A
subwoofer is there to enhance bass, extending the response of the
entire system so the bass can be felt as well as heard. However,
overall balance must be maintained or the music will not sound
natural.An experienced listener will set the volume of the subwoofer
so its impact on bass response is always there but never obtrusive.
TSS-450 6
TSS450/230
INFINITY
Harman Consumer Group International
SPECIFICATIONS
TSS-450
Satellites Center Channel
Frequency Range: 150Hz 20,000Hz (±3dB) 150Hz 20,000Hz (±3dB)
Recommended
Amplifier Power Range: 10 100 watts 10 125 watts
Sensitivity: 88dB 89dB
(2.83V @ 1 meter)
Nominal Impedance: 8 8
Crossover Frequency: 7000Hz 7000Hz
Midrange Driver(s): 63mm (2-1/2") MMD, Dual 63mm (2-1/2") MMD,
magnetically shielded magnetically shielded
High-Frequency Driver: 13mm (1/2") MMD, 13mm (1/2") MMD,
magnetically shielded magnetically shielded
Dimensions (H x W x D): 127mm x 88mm x 88mm 88mm x 203mm x 88mm
(5" x 3-1/2" x 3-1/2") (3-1/2" x 8" x 3-1/2")
Weight: 0.5kg (1.2 lb) 0.9kg (1.9 lb)
Powered Subwoofer
Frequency Range: 39Hz 150Hz (±3dB)
Amplifier Output: 100 watts RMS
Low-Frequency Driver: 200mm (8") MMD
Crossover Frequency: 120Hz, 24dB/octave (LFE/Normal switch in Normal position)
Dimensions (H x W x D): 413mm x 262mm x 394mm
(16-1/4" x 10-1/4" x 15-1/4")
Weight: 12.9kg (28.3 lb)
Infinity continually strives to update and improve existing products, as well as create new ones.The specifications and construction details in this and related Infinity publications are
therefore subject to change without notice.
7 TSS-450 TSS450/230
INFINITY Harman Consumer Group International
Model name: TSS-450PLT/230 (INFINITY PLATINUM HOME CINEMA)
No. Part number Description Q'ty
01 TSS-450PLT/230CA 4PCS/SAT+1PCS*CENTER 1PC
02 TSS-450PLT/230SUB 8" 4 OHM WOOFER+AMP BOX 1PC
03 406-000-05092 O/M TSS-450PLT/230&TSS-450CHR/230 1PC
04 402-000-01816 Gift box TSS-450(230V)SYSTEMPLATINUM 1PC
05 413-000-00670 label made in TSS-450 CHR;PLT 1PC
Model name: TSS-450PLT/230 CA
No. Part number Description Q'ty
01 TSS-450PLT/230SAT 2" WOOFER+TW 4 OHM BOX. 4PCS
02 TSS-450PLT/230CEN 2*2"WOOFER+TW 4 OHM BOX 1PC
03 431-000-01039 EPS Polyform TSS-450CHR/CA;PLT/CA 1PC
04 370-000-00276G PE+PVC+CU wire bag40 AWG#18-30 2PCS
05 370-000-00277G PE+PVC+CU wire bag 20AWG#18-30 3PCS
06 370-000-00273 PE+PVC+CU wire bag 1PCS RCA 1PC
07 398-ABS-00303S ABS ball bracket S15*43 silver 4PCS
08 399-FE-00630 FE iron bar4.5mm*100mm BLACK 1PC
09 398-ABS-00317-0LA ABS plastic assemble 65*35.5H silver 1PC
10 400-000-04714 master cartonTSS-450CHR/CA;PLT/CA 1PC
Model name: TSS-450PLT/230 SAT
No. Part number Description Q'ty
01 306-ABS-00719S ABS back cover plastic116.5*88*70.3H silver 1PC
02 303-ABS-00172S ABS top cover 88*88*11.8T silver 1PC
03 304-ABS-00177S ABS bottom 88*88*16.5T silver 1PC
04 215-000-00547 terminal 1PC
05 22PF48JA-DW07 2" 19MM 4OHM(1.9+1.3)OZ 1PC
06 013-7500-00794 X-over INFINITY TSS-450 SAT 1PC
07 11DM13NG-DT01 13MM DOME TWEETER 4OHM 1PC
08 328-SPG-00028 Absortion material white 76*76*20T 1PC
09 213-020-00516W ABS plastic 68*68*2.95T 1PC
10 352-BM04018D621 FE screw T4*18 6PCS
11 320-RUB-00053 Rubber foot 11 3PCS
12 329-020-00735S FE iron grille 113.5*74*12.5T silver 1PC
13 410-000-02687 PAP model label TSS-450PLT SAT 1PC
14 423-000-00364 PE bag TSS-SAT450CHR;PLT 1PC
15 411-000-01703 PAT serial label TSS450-PLT/230 SAT 1PC
16 352-AM03008D035 screw 3*8 2PCS
17 316-ABS-00547 ABS logo 26.38*6.1 1PC
18 375-000-00016 Black glue to iron grille 2.0*5mm 4PCS
TSS450/230
INFINITY Harman Consumer Group International
Model name: TSS-450PLT/230 CEN
No. Part number Description Q'ty
01 306-ABS-00720S ABS back cover 190*88*70.3H silver 1PC
02 303-ABS-00179S ABS top cover 88*88*11.8T silver 2PCS
03 215-000-00547 screw 1PC
04 22PF48JA-HW05 2" 19MM 8OHM (1.9+1.3)OZ 2PCS
05 19DM13NG-DT01 13MM DOME TWEETER 4OHM 1PC
06 013-7500-00793 x-over INFINITY TSS-450 CENTER 1PC
07 328-SPG-00028 Absortion material white 76*76*20T 1PC
08 213-020-00516W ABS glue ring 68*68*2.95T 2PCS
09 352-BM04018D621 FE screwT4*18 8PCS
10 320-RUB-00053 rubber foot 11 2PCS
11 351-GM04025A466 screw bracket black M4*22 RUBBER HEAD 1PC
12 329-020-00734S FE iron grille187*74*12.3T silver 1PC
13 410-000-02689 PAP model label TSS-450PLT CEN 1PC
14 423-000-00365 PE bag TSS-450PLT CEN;CHR CEN 1PC
15 411-000-01705 PAP serial label TSS450-PLT/230 CEN 1PC
16 352-AM03008D035 screw 3*8 2PCS
17 316-ABS-00547 ABS logo 26.38*6.1 1PC
18 375-000-00016 black glue to iron grille 2.0*5mm 4PCS
Model name: TSS-450PLT/230 SUB
No. Part number Description Q'ty
01 241-080-00601S WOD+ABS cabinet+ silver front baffle+LED+port+ab1PC
02 010-7510-00370 Amp INFINITY 100W TSS-450PLT 230V 1PC
03 20MF10DAG-DW01 8" 35MM 4OHM (17+12)OZ 1PC
04 329-080-00736S FE iron grille 215*18H silver 1PC
05 352-AM04020D210 screw t4*20 10PCS
06 320-RUB-00199 RUB Rubber foot 2.5T 7 70degree 4PCS
07 320-ABS-00195 ABS foot support 26*19.97 4PCS
08 352-CM04025D604 FE screw T4*25 4PCS
09 423-000-00366 PE bag TSS-450CHR SUB;PLT SUB 1PC
10 411-000-01704 PAP serial labelTSS450-PLT/230 SUB 1PC
11 431-000-01026 EPE polyform TSS-450CHR SUB;PLTSUB 1PC
12 352-FM04020D605 FE screw T4*20 8PCS
13 423-000-00007 plastic bag 8"*9"*0.02t 1PC
14 411-000-05318 PAP TSS-450PLT/230 SUB silver 1PC
TSS450/230
INFINITY Harman Consumer Group International
Model name: 010-7510-00370 (AMP INFINITY 100W TSS-450PLT/230)
No. Part number Description Referance Q'ty
01 051-A00368A PCB ASS'Y OF TSS-450 1PC
02 351-AM03008A079 Screw M3*8 black 6PCS
03 351-BM03012A088 Screw M3*12 1PC
04 351-HM04016A218 Screw M4*16 black 4PCS
05 354-GM04002 Screw with screw plate M4 4PCS
06 352-AM03008D040 Screw 3*8 type B black 8PCS
07 352-AM03010D065 Screw 3*10 type P black 4PCS
08 350-EM04012D024 Screw 4 *12 black 4PCS
09 150-e8604106 Transformer EI-86 230V/50Hz 1PC
10 152-v602026 Power code SP-021A 6FT VDE 1PC
11 154-v12506t0 Fuse TSD 1.25A 250V VDE 1PC
12 155-520020 Fuse holder R3-11 1PC
13 162-10082007 Wire red 18AWG 80mm 1PC
14 162-a040d001 Speaker wire #1015 400mm 1PC
15 163-11009 Transparent bind-up wire 100mm 2PCS
16 176-wjce1 Closing terminal CE-1 1PC
17 180-pbr12c11s Power switch PUSH BR12C11S 1PC
18 193-2m1813 Piezo TO-220 18*13mm 2PCS
19 302-AL-00226-0VE Alu. panel 215*270*2.5t 1PC
20 361-FE-00004 IC HOLDER 26.9*12*1.4T 1PC
21 323-AL-00108 HEAT SINK 117.5*60*25 1PC
22 311-ABS-00028 Plastic knob 46077-W P.V.C. 1PC
23 306-ABS-00714 Plastic rear cover 268*213*102 1PC
24 335-NYL-00002 Power wire fastening 4K-4 NO-BB 2PCS
25 333-EVA-00096 EVA caution 213*15*2.0mm 2PCS
26 333-EVA-00097 EVA caution 213*15*1.0t 2PCS
27 333-EVA-00132 EVA caution 238*15*2.0mm 2PCS
28 333-EVA-00133 EVA caution 238*15*1.0t 2PCS
29 333-EVA-00220 EVA caution 225*15*1t UL 1PC
30 320-RUB-00033 Rubber sheet 25*21*4t 4PCS
31 362-FE-00013 PCB holder L TYPE t=1.6mmS.P.C.C 2PCS
32 333-EVA-00188 EVA caution 170x5x1t 1PC
33 413-000-00188 Speaker lable 4 OHM 45*8mm 1PC
34 413-000-00540 Label of MADE IN CHINA 1PC
TSS450/230
INFINITY Harman Consumer Group International
Model name: 051-A00368A PCB ASS'Y OF TSS-450
No. Part number Description Referance Q'ty
01 052-A00368A AI PCB ASS'Y OF TSS-450 1PC
04 110-10821jk2 Resistor 820 1W ±5% 1PC
05 110-122r2j15 Resistor 2.2 1/2W ±5% R127 1PC
06 113-500r1j10 Resistor 0.1 5W ±5% R121,122 2PCS
07 114-03302m0 Resistor 3K 0.3W ±20% R138 1PC
08 115-h503a101 Resistor D16 50K/1 A VR201 1PC
09 135-4478m35 Capacitor 4700uF 35V ±20% C121,122 2PCS
10 135-4478m50 Capacitor 4700uF 50V ±20% C133,134 2PCS
12 162-10202001 Wire 26AWG 1007 200mm RED 1PC
13 162-50332003 2PIN 330mm RED D209 1PC
14 171-udhss124d Relay 5A 24V UDH-SS124D RY101 1PC
15 174-0rcb202v RCA JACK RCB-202V JK202 1PC
16 174-0rca108nb RCA JACK RCA108NB 1P 1PC
17 174-2rsp108v 8 PIN speaker terminal RSP-108V JK201 1PC
18 175-1c07v01 Connector 7PIN PITCH=2.5mm P101 1PC
19 175-1d02v01 Connector 2PIN PITCH=3.96mm P102 1PC
20 175-1d05v01 Connector 5PIN 3.96mm P103 1PC
21 180-tms7210v SWITCH SLIDE 6PIN MS7210V SW201 1PC
22 190-06m4558d I.C. OPA 4558D U101,203 2PCS
23 190-16tl074cn I.C TL074CN ST U201,202 2PCS
24 192-027c1815gr Transistor 2SC1815GR TAP Q101,115 2PCS
25 192-991d669a Transistor HI-SINCERITY HSD669A Q106 1PC
26 192-021tip35c Transistor TIP35C Q107 1PC
27 192-992b649t Transistor HSB649T Q105 1PC
28 192-022tip36c Transistor TIP36C Q108 1PC
29 192-161tip41c Transistor TIP41C NPN SGS Q124 1PC
30 192-162tip42c Transistor TIP42C PNP SGS Q120 1PC
31 192-201d882y Transistor KSD882Y Q117 1PC
32 192-202b772y Transistor KSB772Y Q119 1PC
33 193-3m2520 Piezo TO-3P 25x20mm Q107,108 2PCS
34 197-00kbl405 Bridge recitifier 4A 500V KBL405 D110,115 2PCS
35 197-101n4002 Diode 1N4002 D104 1PC
36 197-101n5402 Diode 1N5402 D111,112 1PC
37 361-FE-00051 Transistor holder 14.2*8.0*5.2t=1.6mm 1PC
39 361-NYL-00054 Diode insulated sheet (SW06002) 2PCS
40 051-A00014B PCB ASS'Y OF SCS135 LIMITER 1PC
TSS450/230
INFINITY Harman Consumer Group International
Model name: 052-A00368A AI PCB ASS'Y OF TSS-450
No. Part number Description Referance Q'ty
02 110-14122j26 Resistor 1.2K 1/4W ±5% CF R265 1PC
03 110-14472j26 Resistor 4.7K 1/4W ±5% CF 26mmTAP R201,202 2PCS
04 110-14560j26 Resistor 56 1/4W ±5% CF 26mmTAP R117 1PC
05 110-16101j26 Resistor 100 1/6W ±5% CF 26mmTAP R120,213,214,215 4PCS
06 110-16102j26 Resistor 1K 1/6W ±5% CF 26mm TAP R124,166,254,264 4PCS
07 110-16103j26 Resistor 10K 1/6W ±5% CF 26mm TAP R133,134,209,212,21618PCS
08 110-16104j26 Resistor 100K 1/6W ±5% CF 26mmTAP R163,164,231 3PCS
09 110-16105j26 Resistor 1M 1/6W ±5% CF 26mm TAP R143,259 2PCS
10 110-16123j26 Resistor 12K 1/6W ±5% CF 26mm TAP R135,139,165 3PCS
11 110-16124j26 Resistor 120K 1/6W ±5% CF 26mmTAP R233 1PC
12 110-16151j26 Resistor 150 1/6W ±5% CF 26mmTAP R253 1PC
13 110-16152j26 Resistor 1.5K 1/6W ±5% CF 26mmTAP R103,123,136,137,1417PCS
14 110-16153j26 Resistor 15K 1/6W ±5% CF 26mm TAP R118,145,152,154,2345PCS
15 110-16154j26 Resistor 150K 1/6W ±5% CF 26mmTAP R131,252 2PCS
16 110-16181j26 Resistor 180 1/6W ±5% CF 26mmTAP R111,114 2PCS
17 110-16183j26 Resistor 18K 1/6W ±5% CF 26mm TAP R227 1PC
18 110-16223j26 Resistor 22K 1/6W ±5% CF 26mmTAP R128,129,155,156,15812PCS
19 110-16273j26 Resistor 27K 1/6W ±5% CF 26mmTAP R223 1PC
20 110-16205j26 Resistor 2M 1/6W ±5% CF 26mm TAP R257 1PC
21 110-16332j26 Resistor 3.3K 1/6W ±5% CF 26mmTAP R106,107,144,236,2585PCS
22 110-16392j26 Resistor 3.9K 1/6W ±5% CF 26mmTAP R105,108 2PCS
23 110-16393j26 Resistor 39K 1/6W ±5% CF 26mm TAP R126 1PC
24 110-16470j26 Resistor 47 1/6W ±5% CF 26mmTAP R112,113,115,116 4PCS
25 110-16471j26 Resistor 470 1/6W ±5% CF 26mmTAP R140,161,162 3PCS
26 110-16472j26 Resistor 4.7K 1/6W ±5% CF 26mmTAP R110,125,130,147,1509PCS
27 110-16473j26 Resistor 47K 1/6W ±5% CF 26mm TAP R101,219,249,250,2515PCS
28 110-16512j26 Resistor 5.1K 1/6W ±5% CF 26mmTAP R210,221 2PCS
29 110-16513j26 Resistor 51K 1/6W ±5% CF 26mm TAP R224 1PC
30 110-16563j26 Resistor 56K 1/6W ±5% CF 26mm TAP R104 1PC
31 110-16681j26 Resistor 680 1/6W ±5% CF 26mmTAP R148,151 2PCS
32 110-16682j26 Resistor 6.8K 1/6W ±5% CF 26mmTAP R109 1PC
33 110-16913j26 Resistor 91K 1/6W ±5% CF 26mm TAP R203-206 4PCS
34 130-sl101k503 Capacitor 100P 50V SL ±10% TAP C139,140,207,214,2205PCS
35 130-2b102k503 Capacitor 1000P 50V ±10% TAP C116,141,203 3PCS
36 130-2b221k503 Capacitor 220P 50V ±10% TAP C204,205,210,211,2126PCS
37 130-2b681k503 Capacitor 680P 50V ±10% TAP C208 1PC
38 130-3f104z503 Capacitor 0.1U 50V +80/-20% TAP C108,113,115,119,13713PCS
39 130-3f473m503 Capacitor 0.047U 50V ±20% TAP C106,209 2PCS
40 130-sl470k503 Capacitor 47P 50V ±10% TAP C229 1PC
41 32-103j503 Capacitor 0.01U 50V ±5% TAP C223,224 2PCS
TSS450/230
INFINITY Harman Consumer Group International
Model name: 052-A00368A AI PCB ASS'Y OF TSS-450
No. Part number Description Referance Q'ty
42 132-104j503 Capacitor 0.1U 50V ±5% TAP C107,218,221,222 4PCS
43 132-223ja03 Capacitor 0.022uF 100V ±5% TAP C123-128,131,132,2159PCS
44 132-473j503 Capacitor 0.047U 50V ±5% TAP C216,217 2PCS
45 135-3105m50 Capacitor1U 50V ±20% TAP C105,112,228 3PCS
46 135-3106m50 Capacitor10uF 50V ±20% TAP C201,202,206,213,2196PCS
47 135-3107m16 Capacitor100uF 16V ±20% TAP C109,110,117,120,2347PCS
48 135-3107m50 Capacitor100U 50V ±20% TAP C135,136 2PCS
49 135-3226m50 Capacitor 22U 50V ±20% TAP C114,118,225 3PCS
50 135-3227m10 Capacitor220U 10V ±20% TAP C129,130, 2PCS
51 135-3227m16 Capacitor 220U 16V ±20% TAP C111,233 2PCS
52 135-3476m25 Capacitor 47U 25V ±20% TAP C103 1PC
53 192-027c1815gr Transistor 2SC1815GR TAP Q102,111,112,113,11810PCS
54 192-027c2235y Transistor 2SC2235Y TAP Q121 1PC
55 192-028a1015gr Transistor 2SA1015GR TAP Q114,116,122,127 4PCS
56 192-028a965y Transistor 2SA965Y TAP Q125 1PC
57 192-1572n5551 Transistor FSC 2N5551 TAP Q103,109 2PCS
58 192-1582n5401 Transistor FSC 2N5401 AI-PNP Q104,110 2PCS
59 197-031n4148 Diode 100mA 75V SIGNAL D101,103,105,108,11319PCS
60 199-15000335 Diode 3.3V 1/2W 52mm TAP D102,205 2PCS
61 199-15000625 Diode 6.2V 1/2W 52mm TAP D106,107 2PCS
62 199-15001605 Diode 6V 1/2W 52mm TAP D109 1PC
Model name: 051-A00014B PCB ASS'Y OF SCS135 LIMITER
No. Part number Description Referance Q'ty
01 052-A00014B AI ASS'Y OF LIMITER 1PC
02 162-50129001 CABLE ASS'Y 120mm AWG28WHT 1PC
03 175-9f40hr2 Connector 40PIN PITCH=2.54mmHR2*40 0.15PC
04 190-16tl074cn I.C TL074CN ST U301,FS101 1PC
05 162-10059001 Wire 50mm WHITE UL1007 AWG266:6 SW101 1PC
Model name: 052-A00014B AI ASS'Y OF LIMITER
No. Part number Description Referance Q'ty
02 110-16103j26 Resistor 10K 1/6W ±5% CF 26mm TAP R301,R303,R304,R30 6PCS
03 110-16223j26 Resistor 22K 1/6W ±5% CF 26mmTAP R310,312 2PCS
04 110-16333j26 Resistor 33K 1/6W ±5% CF 26mmTAP R305 1PC
05 110-16474j26 Resistor 470K 1/6W ±5% CF 26mmTAP R307 1PC
06 110-16751j26 Resistor 750 1/6W ±5% CF 26mmTAP R311,313 2PCS
07 110-16755j26 Resistor 7.5M 1/6W ±5% CF 26mmTAP R306 1PC
08 130-3f104z503 Capacitor 0.1U 50V +80/-20% TAP C305,306 2PCS
09 132-103j503 Capacitor 0.01U 50V ±5% TAP C302,303 2PCS
10 135-3226m50 Capacitor22U 50V ±20% TAP C301 1PC
11 135-3476m25 Capacitor 47U 25V ±20% TAP C304 1PC
12 192-027c1815gr Transistor 2SC1815GR TAP Q301,302 2PCS
13 197-031n4148 Diode 100mA 75V SIGNAL D301,302 2PCS
15 110-16153j26 Resistor 15K 1/6W ±5% CF 26mm TAP R302 1PC
TSS450/230
INFINITY Harman Consumer Group International
TSS450/230
INFINITY Harman Consumer Group International
TSS450/230
Harman Consumer Group International
INFINITY
TSS450/230
INFINITY Harman Consumer Group International
TSS450/230
INFINITY Harman Consumer Group International
TSS450/230
INFINITY Harman Consumer Group International
TSS450/230
INFINITY Harman Consumer Group International
TSS450/230