Text preview for : SAMSUNG LE26R73 Ch.GLY26.pdf part of SAMSUNG LE 26R73BD service manual
Back to : SAMSUNG LE26R73 Ch.GLY | Home
TFT-LCD TV
Chassis GLY26KE
GLY32KE
GLY37KE
GLY40KE
Model LE26R73BD/LE26R74BD
LE32R73BD/LE32R74BD
LE37R74BD
LE40R73BD/LE40R74BD
SERVICE Manual
TFT-LCD TV Fashion Feature
- Luxurious Slim Design
- Supreme Picture Quality
- Supreme Sound Quality
- Supreme Convenience Quality
- Convenience for Users
- DVB-T, iDTV
- MHP (Only for R62F)
1 Precautions
1 Precautions
Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock.
1-1 Safety Precautions
1-1-1 Warnings
1. For continued safety, do not attempt to modify the
circuit board.
2. Disconnect the AC power and DC Power Jack before
servicing.
1-1-2 Servicing the LCD Monitor
1. When servicing the LCD Monitor Disconnect the AC
line cord from the AC outlet.
2. It is essential that service technicians have an accurate
voltage meter available at all times. Check the
calibration of this meter periodically.
1-1-3 Fire and Shock Hazard
Before returning the monitor to the user, perform the Figure 1-1. Leakage Current Test Circuit
following safety checks:
1. Inspect each lead dress to make certain that the leads
are not pinched or that hardware is not lodged between
1-1-4 Product Safety Notices
the chassis and other metal parts in the monitor. Some electrical and mechanical parts have special
2. Inspect all protective devices such as nonmetallic safety-related characteristics which are often not evident
control knobs, insulating materials, cabinet backs, from visual inspection. The protection they give may not
adjustment and compartment covers or shields, be obtained by replacing them with components rated for
isolation resistor-capacitor networks, mechanical higher voltage, wattage, etc. Parts that have special safety
insulators, etc. characteristics are identified by on schematics and parts
lists. A substitute replacement that does not have the same
3. Leakage Current Hot Check (Figure 1-1): safety characteristics as the recommended replacement part
WARNING: Do not use an isolation might create shock, fire and/or other hazards. Product
transformer during safety is under review continuously and new instructions
this test. are issued whenever appropriate.
Use a leakage current tester or a metering system that
complies with American National Standards Institute
(ANSI C101.1, Leakage Current for Appliances), and
Underwriters Laboratories (UL Publication UL1410,
59.7).
1-1
1 Precautions
1-2 Servicing Precautions
WARNING: An electrolytic capacitor installed with the wrong polarity might explode.
Caution: Before servicing units covered by this service manual, read and follow the Safety
Precautions section of this manual.
Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety
precautions, always follow the safety precautions.
1-2-1 General Servicing 4. Check the insulation between the blades of the AC
plug and accessible conductive parts (examples: metal
panels, input terminals and earphone jacks).
Precautions 5. Insulation Checking Procedure: Disconnect the power
1. Always unplug the unit s AC power cord from the AC cord from the AC source and turn the power switch
power source and disconnect the DC Power Jack ON. Connect an insulation resistance meter (500 V) to
before attempting to: the blades of the AC plug.
(a) remove or reinstall any component or assembly, (b) The insulation resistance between each blade of the
disconnect PCB plugs or connectors, (c) connect a test AC plug and accessible conductive parts (see above)
component in parallel with an electrolytic capacitor. should be greater than 1 megohm.
2. Some components are raised above the printed circuit 6. Always connect a test instrument s ground lead to the
board for safety. An insulation tube or tape is instrument chassis ground before connecting the
sometimes used. The internal wiring is sometimes positive lead; always remove the instrument s ground
clamped to prevent contact with thermally hot lead last.
components. Reinstall all such elements to their
original position.
3. After servicing, always check that the screws,
components and wiring have been correctly
reinstalled. Make sure that the area around the
serviced part has not been damaged.
1-3 Static Electricity Precautions
Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly called
Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some field-effect transistors.
The following techniques will reduce the incidence of component damage caused by static electricity.
6. Do not remove a replacement ESD from its protective
1. Immediately before handling any semiconductor package until you are ready to install it. Most
components or assemblies, drain the electrostatic replacement ESDs are packaged with leads that are
charge from your body by touching a known earth electrically shorted together by conductive foam,
ground. Alternatively, wear a discharging wrist-strap aluminum foil or other conductive materials.
device. To avoid a shock hazard, be sure to remove the 7. Immediately before removing the protective material
wrist strap before applying power to the monitor. from the leads of a replacement ESD, touch the
2. After removing an ESD-equipped assembly, place it protective material to the chassis or circuit assembly
on a conductive surface such as aluminum foil to into which the device will be installed.
prevent accumulation of an electrostatic charge. Caution: Be sure no power is applied to
3. Do not use freon-propelled chemicals. These can the chassis or circuit and
generate electrical charges sufficient to damage ESDs. observe all other safety
4. Use only a grounded-tip soldering iron to solder or precautions.
desolder ESDs.
8. Minimize body motions when handling unpackaged
5. Use only an anti-static solder removal device. Some
replacement ESDs. Motions such as brushing clothes
solder removal devices not classified as anti-static
together, or lifting your foot from a carpeted floor can
can generate electrical charges sufficient to damage
generate enough static electricity to damage an ESD.
ESDs.
1-2
1 Precautions
1-4 Installation Precautions
1. For safety reasons, more than two people are 6. Keep the antenna far away from any high-voltage
required for carrying the product. cables and install it firmly. Contact with the high-
voltage cable or the antenna falling over may
2. Keep the power cord away from any heat emitting cause fire or electric shock.
devices, as a melted covering may cause fire or
electric shock. 7. When installing the product, leave enough space
(10cm) between the product and the wall for
3. Do not place the product in areas with poor ventilation purposes.
ventilation such as a bookshelf or closet. The A rise in temperature within the product may
increased internal temperature may cause fire. cause fire.
4. Bend the external antenna cable when connecting
it to the product. This is a measure to protect it
from being exposed to moisture. Otherwise, it
may cause a fire or electric shock.
5. Make sure to turn the power off and unplug the
power cord from the outlet before repositioning
the product. Also check the antenna cable or the
external connectors if they are fully unplugged.
Damage to the cord may cause fire or electric
shock.
1-3
1 Precautions
Memo
1-4
3 Alignments and Adjustments
3 Alignments and Adjustments
3-1 Service Instruction
1. Usually, a color TV-VCR needs only slight touch-up adjustment upon installation.
Check the basic characteristics such as height, horizontal and vertical sync.
2. Use the specified test equipment or its equivalent.
3. Correct impedance matching is essential.
4. Avoid overload. Excessive signal from a sweep generator might overload the front-end
of the TV. When inserting signal markers, do not allow the marker generator to distort
test result.
5. Connect the TV only to an AC power source with voltage and frequency as specified on
the backcover nameplate.
6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure
that the power cord is disconnected before replacing any parts.
7. To protect aganist shock hazard, use an isolation transform.
3-1
3 Alignments and Adjustments
3-2 How to Access Service Mode
3-2-1 Entering Factory Mode
1. To enter "Service Mode" Press the remote -control keys in this sequence :
- If you do not have Factory remote - control
- If you have Factory remote - control
- The buttons are active in the service mode.
1. Remote - Control Key : Power, Arrow Up, Arrow Down, Arrow Left
Arrow Right, Menu, Enter, Number Key(0~9)
2. Function - Control Key : Power, CH +, CH -, VOL +, VOL -,
Menu, TV/VIDEO(Enter)
3-2-2 Panel Check
Specially for LE32R71B, You have to check Panel Maker Because of different adjustments as follows.
First of all, Check the label rating!
1) Label Rating File
* If not printed you could consider S(sec) panel mark.
2) If Panel Mark is "A", Set the factory mode indicating as follows.
* Option Byte
1. Inch Option 32"
2. Gamma 32"AUO
3. Panel Option AUO
Others are same shown below.
3-2
3 Alignments and Adjustments
3-3 Factory Data
1. Calibration
2. Option Table XXXX XXXX
3. White Balance
4. SVP-PX
5. Option Block
6. STV8257/STA323W
7. YC Delay
8. Adjust
9. I2C Check
10. W/B MOVIE
11. Checksum
12. Reset
13. Spread Spectrum
T-BRDMPEUD-0036 (Main Micom Ver)
T-CBGMPEUS-0004 (Sub Micom Ver)
Month / Day / Year / Hour / Min. / Sec.
1. Calibration
1) AV Calibration
2) COMP Calibration
3) PC Calibration
4) HDMI Calibration
2. Option Table XXXX XXXX
Inch Option 32" Carrier Mute ON TTX Group Auto
Gamma OFF Language English Auto Power ON
Panel Option AMLCD_INT Auto FM ON ---- OFF
2HDMI OFF High Deviation OFF ---- G
Brt.Sensor OFF TTX ON ---- OFF
EnergySave ON TTX List ON Debug OFF
LBE/FBE OFF ACR OFF Ch.Table SUWON
FRC(Micronas) OFF Dynamic CE ON iDTV_Cntry UK
FRC(Samsung) OFF Dynamic Dimming ON Dynamic Contrast OFF
LNA OFF Tuner TOP 10
3-3
3 Alignments and Adjustments
3-4
3 Alignments and Adjustments
3-5
3 Alignments and Adjustments
3-4 Service Adjustment
3-4-1 White Balance - Calibration
If picture color is wrong, do calibration first.
Equipment : CA210, Patten : chess pattern
Execute calibration in Factory Mode
Source AV : PAL composite, Component : 1280*720/60Hz
PC : 1024*768/60Hz
( chess patten )
3-4-2 White Balance - Adjustment
If picture color is wrong, check White Balance condition.
Equipment : CA210, Patten : Toshiba
Adjust W/B in Factory Mode
Sub brightness and R/G/B Offset controls low light region
Sub contrast and R/G/B Gain controls high light region
Source AV : PAL composite, Component : 1280*720/60Hz
HDMI[DVI] : 1280*720/60Hz
[ Test Pattern : MSPG-945 Series Pattern #16 ]
*Color temperature
1500K +/-500, -6 ~-20 MPCD
*Color coordinate
H/L : 267/263 +/- 2 35.0 Ft +/- 2.0Ft
L/L : 270/260 +/- 3 1.5 Ft +/- 0.2Ft
Toshiba Patten
3-6
3 Alignments and Adjustments
3-4-3 Conditions for Measurement
1. On the basis of toshiba ABL pattern : High Light level (57 IRE)
- INPUT SIGNAL GENERATOR : MSPG-925LTH
* Mode NO 2 : 744X484@60 Hz
NO 6 : 1280X720@60 Hz
NO 21 : 1024X768@60 Hz
* Pattern NO 36 : 16 Color Pattern
NO 16 : Toshiba ABL Pattern
2. Optical measuring device : CA210 (FL)
Please use the MSPG-925 LTH generator for model LE26M51B/LE32M51B/LE40M51B/LE46M51B.
3-4-4 Method of Adjustment
1. Adjust the white balance of AV, Component and DVI Modes.
(AV Component)
a) Set the input to the mode in which the adjustment will be made
(RF DTV PC DVI).
* Input signal - VIDEO Mode : Model #2 (744*484 Mode), Pattern #16
- DTV,DVI Mode : Model #6 (1280*720 Mode), Pattern #16
- HDMI Mode: Model #6(1280*720 Mode), Pattern #16
b) Enter factory color control, confirm the data.
c) Adjust the low light. (Refer to table 1, 2 in adjustment position by mode)
- Adjust sub - Brightness to set the 'Y' value.
- Adjust red offset ('x') and blue offset ('y') to the color coordinates.
Picture 4-2 Toshiba ABL Pattern
Low light
Measurement point
* Do not adjust green offset data.
d) Adjust the high light. (Refer to table 1, 2 in adjustment position by mode)
- Adjust red gain ('x') and blue gain ('y') to the color coordinates.
* Do not adjust the green gain and sub-contrast (Y) data.
3-7
3 Alignments and Adjustments
d) Adjust the high light. (Refer to table 1, 2 in adjustment position by mode)
- Adjust red gain ('x') and blue gain ('y') to the color coordinates.
* Do not adjust the green gain and sub-contrast (Y) data.
Picture 4-3 Toshiba ABL Pattern
High light
Measurement point
3-8
3 Alignments and Adjustments
3-5 Software Upgrade
3-5-1 How to Update Flash ROM
1. Installthe Flash Downloader
ConnectSet(Service Jack)and Jig Cable to execute Program Update.
2. Flash Downloader program update
-Before Turning on the set,Click "connect"which is under of OSD Screen!
-Turn on the Set.
3-9
3 Alignments and Adjustments
3-6 DTV Program Download & Generals
3-6-1 Software Version Check Method
Press the MENU key and select System.
Where you can find the Prodect Information menu in it.
When you press the Product Information you can find the Software Version.
3-6-2 Serial Download Method
1) Turn off LCD-TV.
2) Connect the RS-232 cable to the LCD-TV
3) Execute the sv2_fr.exe file.
4) Assign the path of samsung.tvz file (application image)
5) Execute the progress follow the screen until step 2.
6) Turn On the LCD-TV.
7) If the LCD-TV turn on during the sv2_fr.exe execution, it will automatically find the COM port and
execute the upgrade.
3-6-3 Hyper Terminal Setting
Set the hyper terminal to observe the progress of the TV via the RS-232 cable.
Set up hyper terminal.
1) When setting up a hyper terminal, set it in sub-program.
2) Enter a new name.
3) Select a modem port. (com 1 and direct connection.)
4) Set the bit/second to 115200.
5) Set the data bit to 8.
6) No parity bit.
7) Set stop bit to 1.
8) No flow control.
9) Save in memory.
10) At this point, the new hyper terminal is ready.
3-6-4 Resetting the System Parameters
1) Press the MENU button and select the Reset menu of System.
2) Press the secret number.
3) Press the RED, GREEN, YELLOW, BLUE button in order, after the Reset execute.
4) In a few minutes, DTV will booting again.
3-10
4 Troubleshooting
4 Troubleshooting
4-1 First Checklist for Troubleshooting
1. Check the various cable connections first.
- Check to see if there is a burnt or damaged cable.
- Check to see if there is a disconnected cable connection or a connection is too loose.
- Check to see if the cables are connected according to the connection diagram.
2. Check the power input to the Main Board.
3. Check the voltage in and out between the SMPS Main Board, between the SMPS
INVERTER Board, and between the Main LVDS Boards.
4-1
4 Troubleshooting
4-2 Checkpoints by Error Mode
4-2-1 No Power
LAMP off, power indicator No
Check a connection a power cable.
LED red color?
Yes
Does proper DC 12V No
Change a Assy PCB Power.
appear at CM801?
Yes
Does proper DC A3.3V, No Check a IC1008, Q1013.
A5V appear at
Change a main PCB ass'y.
C1059, C1167?
Yes
Does proper DC 5V, 3.3V, No
1.9V appear at C1015, C1130, Check a IC1005, IC1002, IC1014,
C1095? IC1011. Change a main PCB ass'y.
Yes
No Check a other function.
A power is supplied to set? (No picture part)
Replace a lcd panel.
4-2
4 Troubleshooting
4-2-2 No Video (Analog PC)
Power Indicator is off.
Lamp on, no video.
Yes
Check a PC source and check No Input a analog PC signal and
the connection of DSUB cable? connected cable(DPMS).
Yes
Does the signal appear at No PC cable. Change a PC
1 #30, 22, 38(R, G, B) of
IC4001? cable. Change a main PCB ass'y.
Yes
Does the digital data appear No Check a IC4001
at the output of
Change a main PCB ass'y.
LVDS (R41043~4113)?
Yes
Check a LVDS cable? No
Replace a lcd panel? Please, Call to Samsung Co. LTD.
4-3
4 Troubleshooting
WAVEFORMS
1 R,G,B Output Signal of IC500
4-4
4 Troubleshooting
4-2-3 No Video (Digital-HDMI)
Power Indicator is off.
Lamp on, no video.
Yes
Check the connection No
Input a HDMI cable.
of HDMI cable?
Yes
Does the digital data appear at No Check a a IC 500
3 R2106~R2113? Change a main PCB ass'y.
Yes
2 Does the digital data No
appear at output of IC4001 Check a IC500
LVDS(R4104~4113)? Change a main PCB ass'y.
Yes
Check a LVDS cable? No
Replace lcd panel? Please, Call to Samsung Co. LTD.
4-5
4 Troubleshooting
2 Digital Output Data of IC500 3 Signal of HDMI(Data)
4-6
4 Troubleshooting
4-2-4 No Picture (Tuner_CVBS)
Power Indicator is off. No Connect the RF cable and
Lamp on, no picure. check RF signal.
Yes
Dose the signal appear No Check a B+ voltage (#3 of Tuner) 5V,
4
at R5014? change a main PCB ass'y
Yes
Does the signal appear at No
4 Change a main PCB ass'y.
#8 of IC4001?
Yes
Does the digital data appear at No Check a IC4001.
3
output of R4104~R4113? Change a main PCB ass'y.
Yes
Check a LVDS cable? No
Replacea lcd panel? Please, Call to Samsung Co. LTD.
4-7
4 Troubleshooting
WAVEFORMS
3 CVBS Output Signal 4 Tuner_CVBS Output Signal
4-8
4 Troubleshooting
4-2-5 No Picture (Video_CVBS)
Power Indicator is off. No
Check a A/V cable and video signal.
Lamp on, no picture.
Yes
Dose the signal appear at No
4 Check a connection harness.
#10 of IC4001?
Yes
Does the signal appear at No Check a IC4001.
Out of IC4001 R4104~R4113? Change a main PCB ass'y
Yes
Check a LVDS cable? No
Replace lcd panel? Please, Call to Samsung Co. LTD.
4-9
4 Troubleshooting
WAVEFORMS
4 CVBS Output Signal
4-10
4 Troubleshooting
4-2-6 No Picture (S-VIDEO_Y,C)
Power Indicator is off. No Connect the s-video cable.
Lamp on, no picure. Operating a video player.
Yes
5 Dose the Y/C signal appear at No
#21, #31 of IC4001? Check a connection harness.
Yes
Does the digital data appear at No
2 Output of IC4001, Check a IC4001.
R4104~R4113? Change a main PCB ass'y.
Yes
Check a LVDS cable? No
Replacea lcd panel? Please, Call to Samsung Co. LTD.
4-11
4 Troubleshooting
WAVEFORMS
2 Digital Output Data of IC500 5 Analog Signal(Y,C) to IC500
4-12
4 Troubleshooting
4-2-7 No Sound
No
Picture is display, no sound. Connect a sound cable.
control a volume.
Yes
Does the signal appear at
Check a connection harness and
Pin #60, #61, #62, #63(I2S_CLK, No headphone jack./Side AV
6 I2S_SCLK,
Check Sound Processor
I2S_LRCLK, I2S_DATA)
IC1009(STV8257)
of IC1009 ?
Yes
Check the DC 12V No Check a B12V Line.
of IC1015? Change a main PCB ass'y.
Yes
Does the signal appear at
7
Pin #10 , #16(CH1_L, R
Sound) No
Change a main PCB ass'y.
And Pin #3, #9
(CH2_L, R Sound)
of IC1015 ?
Yes
Replace the speaker ass'y?
4-13
4 Troubleshooting
WAVEFORMS
6 The Signal are Inputed to IC603 7 DC +12V
4-14
5 Exploded View & Parts List
5 Exploded View and Parts List
- You can search for updated part codes through ITSELF web site.
URL : http://itself.sec.samsung.co.kr/
5-1 LE26R73BD Exploded View
M0014
M0013
T0175
T0159
T0447
M0215
T0175
M0013
T0003
5-1
5 Exploded View & Parts List
5-2 LE26R73BD Parts list
Location Code.No Item & Specification Q'ty SA/SNA Remark
T0003 BN96-03012C ASSY COVER P-FRONT;26R73,EO,ABS+PMMA,HB, 1 SA
T0175 BN96-03053A ASSY SPEAKER P;16ohm,Bordeuax 26,Left,5W 1 SA
T0175 BN96-03054A ASSY SPEAKER P;16ohm,Bordeuax 26,Right,5 1 SA
M0215 BN07-00254A LCD-PANEL;T260XW02,8bit,626.0*373.0*50.0 1 SA
T0447 BN96-03439B ASSY BRACKET P-PANEL;26,SECC,BUILT-IN,AU 1 SNA
M0014 BN94-01001A ASSY PCB MAIN-AMZ;LE26R74BDX/* 1 SNA
T0159 BN96-03058A ASSY PCB P-SMPS;Bordeaux 26 PFC,LE26R71B 1 SA
M0013 BN96-03245A ASSY COVER P-REAR;26R73,EO,ABS+PMMA,HB,B 1 SA
M0013 BN96-03017A ASSY STAND P-BASE;26R71,ABS+PMMA,HB,BK23 1 SA
5-2
5 Exploded View & Parts List
5-3 LE32R73BD Exploded View
M0014
M0013
T0175
T0447
M0215
T0175
T0003
M0013
5-3
5 Exploded View & Parts List
5-4 LE32R73BD Parts list
Location Code.No Item & Specification Q'ty SA/SNA Remark
T0003 BN96-02996E ASSY COVER P-FRONT;32R73,EO,ABS+PMMA,HB, 1 SA
T0175 BN96-03002A ASSY SPEAKER P;8ohm,Bordeuax 32"/37"/40" 1 SA
T0175 BN96-03003A ASSY SPEAKER P;8ohm,Bordeuax 32"/37"/40" 1 SA
M0215 BN07-00247A LCD-PANEL;LTA320WT-L14,-,8BIT,760*450*50 1 SA
T0447 BN96-03440A ASSY BRACKET P-PANEL;32,SECC,BUILT-IN 1 SNA
M0014 BN94-01001B ASSY PCB MAIN-AMZ;LE32R74BDX/* 1 SA
M0013 BN96-03244A ASSY COVER P-REAR;32R73,EO,ABS+PMMA,HB,B 1 SA
M0013 BN96-02998A ASSY STAND P-BASE;32R71,ABS+PMMA,HB,BK23 1 SA
5-4
5 Exploded View & Parts List
5-5 LE40R73BD Exploded View
M0014
M0013
T0101
T0175
T0447
M0215
T0175
T0003
M0013
5-5
5 Exploded View & Parts List
5-6 LE40R73BD Parts list
Location Code.No Item & Specification Q'ty SA/SNA Remark
T0003 BN96-03011E ASSY COVER P-FRONT;40R73,EO,ABS+PMMA,HB, 1 SA
T0175 BN96-03002A ASSY SPEAKER P;8ohm,Bordeuax 32"/37"/40" 1 SA
T0175 BN96-03003A ASSY SPEAKER P;8ohm,Bordeuax 32"/37"/40" 1 SA
M0215 BN07-00264A LCD-PANEL;LTA400WT-L01,8bit,952*551*51.0 1 SA
T0447 BN96-03442B ASSY BRACKET P-PANEL;CAMBRIDGE40,SECC,AM 1 SNA
M0014 BN94-01001B ASSY PCB MAIN-AMZ;LE32R74BDX/* 1 SA
T0101 BN61-02427A BRACKET-WALL;BORDEAUX 40,SECC,T1.2 1 SNA
M0013 BN96-03243A ASSY COVER P-REAR;40R73,EO,ABS+PMMA,HB,B 1 SA
M0013 BN96-03016A ASSY STAND P-BASE;40R71,ABS+PMMA,HB,BK23 1 SA
5-6
5 Exploded View & Parts List
5-7 LE26R74BD Exploded View
T0603
M0146
T0422
M0014
M0013
T0159
T0175
M0146
M0215
T0175
T0003
M0013
5-7
5 Exploded View & Parts List
5-8 LE26R74BD Parts list
Location Code.No Item & Specification Q'ty SA/SNA Remark
T0003 BN96-03260B ASSY COVER P-FRONT;26R74,EO,ABS+PMMA,HB, 1 SA
T0175 BN96-03264A ASSY SPEAKER P;16ohm,Bordeuax2, 26,Left, 1 SA
T0175 BN96-03265A ASSY SPEAKER P;16ohm,Bordeuax2, 26,Right 1 SA
M0215 BN07-00254A LCD-PANEL;T260XW02,8bit,626.0*373.0*50.0 1 SA
M0146 BN61-02205B BRACKET-PANEL TOP;Bordeaux 26,SECC,T1.2 1 SNA
T0159 BN96-03058A ASSY PCB P-SMPS;Bordeaux 26 PFC,LE26R71B 1 SA
M0014 BN94-00866A ASSY PCB MAIN;LE26R73BDX/XEU,CAMBRIDGE 1 SA
T0422 BN94-00887B ASSY PCB MISC-DTV MODULE;LE26R73BD/LE26R 1 SNA
M0146 BN63-02460A SHIELD CASE;CAMBRIDGE 26,SECC,T0.8,ITALY 1 SA
T0603 BN63-02458A SHIELD-PCB MAIN;CAMBRIDGE 32,SECC,T0.5,U 1 SA
M0013 BN96-03245A ASSY COVER P-REAR;26R73,EO,ABS+PMMA,HB,B 1 SA
M0013 BN96-03017A ASSY STAND P-BASE;26R71,ABS+PMMA,HB,BK23 1 SA
5-8
5 Exploded View & Parts List
5-9 LE32R74BD Exploded View
T0603
M0146
T0422
M0014 M0013
T0159
T0175
T0514
M0215
T0175
T0003
M0013
5-9
5 Exploded View & Parts List
5-10 LE32R74BD Parts list
Location Code.No Item & Specification Q'ty SA/SNA Remark
T0003 BN96-03259B ASSY COVER P-FRONT;32R74,EO,ABS+PMMA,HB, 1 SA
T0175 BN96-03266A ASSY SPEAKER P;8ohm,Bordeuax2, 32,Left,1 1 SA
T0175 BN96-03267A ASSY SPEAKER P;8ohm,Bordeuax2, 32,Right, 1 SA
M0215 BN07-00247A LCD-PANEL;LTA320WT-L14,-,8BIT,760*450*50 1 SA
T0514 BN61-02393A BRACKET-SUPPORT;CAMBRIDGE 32,SECC,T1.2 1 SA
T0159 BN96-03057A ASSY PCB P-SMPS;Bordeaux 32 PFC,LE32R71B 1 SA
M0014 BN94-00865A ASSY PCB MAIN;LE32R73BDX/XEU,CAMBRIDGE 1 SA
T0422 BN94-00887A ASSY PCB MISC-DTV MODULE;DTV MODULE,XEF 1 SNA
M0146 BN63-02462A SHIELD CASE;CAMBRIDGE 32,SECC,T0.8,UK 1 SA
T0603 BN63-02458A SHIELD-PCB MAIN;CAMBRIDGE 32,SECC,T0.5,U 1 SA
M0013 BN96-03244A ASSY COVER P-REAR;32R73,EO,ABS+PMMA,HB,B 1 SA
M0013 BN96-02998A ASSY STAND P-BASE;32R71,ABS+PMMA,HB,BK23 1 SA
5-10
5 Exploded View & Parts List
5-11 LE37R74BD Exploded View
T0603
M0146
T0422
M0013
M0014
T0101
T0514
T0159
T0175
M0215
T0175
T0003
M0013
5-11
5 Exploded View & Parts List
5-12 LE37R74BD Parts list
Location Code.No Item & Specification Q'ty SA/SNA Remark
T0003 BN96-03254B ASSY COVER P-FRONT;37R74,EO,ABS+PMMA,HB, 1 SA
T0175 BN96-03266A ASSY SPEAKER P;8ohm,Bordeuax2, 32,Left,1 1 SA
T0175 BN96-03267A ASSY SPEAKER P;8ohm,Bordeuax2, 32,Right, 1 SA
M0215 BN07-00255A LCD-PANEL;T370XW01,8bit,877.0*514.6*54.7 1 SA
T0514 BN61-02393A BRACKET-SUPPORT;CAMBRIDGE 32,SECC,T1.2 1 SA
T0101 BN61-02427A BRACKET-WALL;BORDEAUX 40,SECC,T1.2 1 SA
T0159 BN96-03050A ASSY PCB P-SMPS;Bordeaux 37 PFC,LE37R71B 1 SNA
M0014 BN94-00865A ASSY PCB MAIN;LE32R73BDX/XEU,CAMBRIDGE 1 SA
T0422 BN94-00887A ASSY PCB MISC-DTV MODULE;DTV MODULE,XEF 1 SNA
M0146 BN63-02462A SHIELD CASE;CAMBRIDGE 32,SECC,T0.8,UK 1 SA
T0603 BN63-02458A SHIELD-PCB MAIN;CAMBRIDGE 32,SECC,T0.5,U 1 SA
M0013 BN96-03292A ASSY COVER P-REAR;37R74,EO,ABS+PMMA,HB,B 1 SA
M0013 BN96-03016A ASSY STAND P-BASE;40R71,ABS+PMMA,HB,BK23 1 SA
5-12
5 Exploded View & Parts List
5-13 LE40R74BD Exploded View
T0603
M0146
T0422
M0013
M0014
T0101
T0514
M0174
T0175
M0215
T0175
T0003
M0013
5-13
5 Exploded View & Parts List
5-14 LE40R74BD Parts list
Location Code.No Item & Specification Q'ty SA/SNA Remark
T0003 BN96-03258B ASSY COVER P-FRONT;40R74,EO,ABS+PMMA,HB, 1 SA
T0175 BN96-03266A ASSY SPEAKER P;8ohm,Bordeuax2, 32,Left,1 1 SA
T0175 BN96-03267A ASSY SPEAKER P;8ohm,Bordeuax2, 32,Right, 1 SA
M0215 BN07-00264A LCD-PANEL;LTA400WT-L01,8bit,952*551*51.0 1 SA
T0514 BN61-02393A BRACKET-SUPPORT;CAMBRIDGE 32,SECC,T1.2 1 SA
T0101 BN61-02427A BRACKET-WALL;BORDEAUX 40,SECC,T1.2 1 SA
M0174 BN44-00134A IP BOARD;SIP40,LE40R71B,2.0~3.0mA,6.0~7. 1 SA
M0014 BN94-00865A ASSY PCB MAIN;LE32R73BDX/XEU,CAMBRIDGE 1 SA
T0422 BN94-00887A ASSY PCB MISC-DTV MODULE;DTV MODULE,XEF 1 SNA
M0146 BN63-02462A SHIELD CASE;CAMBRIDGE 32,SECC,T0.8,UK 1 SA
T0603 BN63-02458A SHIELD-PCB MAIN;CAMBRIDGE 32,SECC,T0.5,U 1 SA
M0013 BN96-03243A ASSY COVER P-REAR;40R73,EO,ABS+PMMA,HB,B 1 SA
M0013 BN96-03016A ASSY STAND P-BASE;40R71,ABS+PMMA,HB,BK23 1 SA
5-14
6 Electrical Parts List
6 Electrical Parts List
-You can search for updated part codes through ITSELF web site.
URL : http://itself.sec.samsung.co.kr/
6-1 LE26R73BDX/XEE Parts List
Level Loc. No. Code No. Description & Specification Q'ty SA/SNA
0 LE26R73BDX/XE LE26R73BD,R62D/26R70-GSH,26,LCD-TV,SWEDE 0
1 M0001 BN90-00844C ASSY COVER FRONT;26R73,EO,CAMBRIDGE 1 SNA
..2 T0003 BN96-03012C ASSY COVER P-FRONT;26R73,EO,ABS+PMMA,HB, 1 SA
...3 M0081 6003-001003 SCREW-TAPTITE;BH,+,B,M4,L12,ZPC(BLK),SWR 2 SNA
...3 M0081 6003-001003 SCREW-TAPTITE;BH,+,B,M4,L12,ZPC(BLK),SWR 2 SNA
...3 T0060 BN61-01655A SPRING ETC;STS-304 SUS,D8,L12,T0.5 1 SA
...3 BN63-02183F COVER-SHEET;Rhcm,PE Vinyl,T0.05,900mm,20 1.118 SNA
...3 M0112 BN63-02331E COVER-FRONT;26R73,EO,ABS+PMMA,HB,BK23,S/ 1 SNA
...3 T0056 BN63-02333A COVER-DECORATION;26R71,HIPS,HB,GR503,BLM 1 SNA
...3 T0023 BN64-00342A KNOB POWER;ROME,40,PC,VIOLET 1 SNA
...3 T0059 BN64-00366A INDICATOR LED;ROME-I,PC,CLEAR,ALL MODEL 1 SNA
...3 T0054 BN64-00443A KNOB-DECORATION;32R71,ABS,HB,GR503,VACUU 1 SNA
...3 T0061 BN64-00453A WINDOW-REMOCON;32R71,PC,V0,VIOLET,DIFFUS 1 SNA
...3 BN96-03404A ASSY BOARD P-FUNCTION&KNOB;Bordeaux,CT50 1 SNA
....4 T0022 BN64-00442A KNOB CONTROL;26,32,40R71,PC,BLK,ACRYL CL 1 SNA
....4 M0145 BN96-03045A ASSY BOARD P-FUNCTION;BORDEAUX,FUNCTION 1 SA
...3 M0146 BN96-03405A ASSY BOARD P-POWER;BORDEAUX1,CT5000-4140 1 SA
..2 T0175 BN96-03053A ASSY SPEAKER P;16ohm,Bordeuax 26,Left,5W 1 SA
..2 T0175 BN96-03054A ASSY SPEAKER P;16ohm,Bordeuax 26,Right,5 1 SA
1 M0216 BN90-00848A ASSY STAND;26R71,BORDEAUX 1 SNA
..2 M0013 BN96-03017A ASSY STAND P-BASE;26R71,ABS+PMMA,HB,BK23 1 SA
...3 T0081 6002-001294 SCREW-TAPPING;BH,+,,M4,L16,ZPC(BLK) 4 SA
...3 M0081 6003-001239 SCREW-TAPTITE;FH,+,B,M4,L10,ZPC(YEL),SWR 4 SA
...3 BN61-02192A GUIDE-STAND;26,32R71,ABS,V0,BLK 1 SNA
...3 BN61-02202A BRACKET-STAND BOTTOM;BORDEAUX 26,SECC,T2 1 SNA
...3 BN61-02204A HOLDER-SWIVEL RING;26,32R71,ACETAL,BLK 1 SNA
...3 BN61-02232A HOLDER-SWIVEL RING;32R71,ACETAL NATUAL,T 1 SNA
...3 BN61-02233A HOLDER-SWIVEL RING;32R71,ACETAL NATUAL,B 1 SNA
...3 BN61-02236A BRACKET-HINGE SWIVEL;BORDEAUX 32,SECC,T1 1 SNA
...3 BN63-02322A COVER-STAND SUB;32R71,ABS+PMMA,HB,BK23,H 1 SNA
...3 T0004 BN63-02335A COVER-STAND BASE;26R71,ABS+PMMA,HB,BK23, 1 SNA
...3 T0132 BN73-00052A RUBBER FOOT;ARES 17,SILICON,DIA 17 * T1. 4 SNA
...3 BN63-02183D COVER-SHEET;Rhcm,PE Vinyl,T0.05,680mm,20 0.4 SNA
...3 T0514 BN61-02367A BRACKET-SUPPORT;BORDEAUX 32,SECC,T2.0 1 SNA
..2 T0524 6902-000241 BAG PE;NITRON/HDPE,T0.5/T0.012,W600,L600 1 SNA
1 M0002 BN90-00874A ASSY COVER REAR;26R73,EO,CAMBRIDGE 1 SNA
..2 T0081 6002-001294 SCREW-TAPPING;BH,+,,M4,L16,ZPC(BLK) 2 SA
..2 T0081 6002-001294 SCREW-TAPPING;BH,+,,M4,L16,ZPC(BLK) 13 SA
..2 M0013 BN96-03245A ASSY COVER P-REAR;26R73,EO,ABS+PMMA,HB,B 1 SA
...3 T0101 BN61-02058A BRACKET-WALL;23,27,MGM,SECC,T1.6 2 SNA
...3 M0006 BN63-02453A COVER-REAR;26R73,EO,ABS+PMMA,HB,BK23,H/G 1 SNA
...3 T0071 BN64-00444E INLAY-TERMINAL;CAMBRIDGE,26,PS SHEET,T0. 1 SNA
...3 BN63-02183F COVER-SHEET;Rhcm,PE Vinyl,T0.05,900mm,20 0.6 SNA
...3 T0064 BN65-00002A CLAMPER CORE;BORDEAUX,PP,V0,BLK 1 SNA
1 M0017 BN91-01006D ASSY CHASSIS;LE26R73BDX/XEE 1 SNA
..2 T0422 BN94-00868B ASSY PCB MISC-DTV MODULE;LE26R73BD/LE26R 1 SNA
...3 T0245 0202-001522 SOLDER-WIRE FLUX;LFA3-107,-,D1.2,96.5Sn/ 0.003 SNA
...3 CN902 3703-001124 CONNECTOR-BACK PANEL;32P,2R,MALE,ANGLE,A 1 SA
...3 CN902 3703-001124 CONNECTOR-BACK PANEL;32P,2R,MALE,ANGLE,A 1 SA
...3 DJ301 3709-001346 CONNECTOR-CARD SLOT;68P,0.27mm,ANGLE,AU1 1 SA
6-1
6 Electrical Parts List
Level Loc. No. Code No. Description & Specification Q'ty SA/SNA
...3 DJ402 3722-001055 JACK-PHONE;5P/2C,AG,BLK,ANGLE 1 SA
...3 T0510 BN97-00842A ASSY SMD-MAIN;DTV MODULE,XEE 1 SNA
....4 CIS05 0202-001477 SOLDER-CREAM;LST309-M,-,D20~45§-,96.5Sn/ 0.465 SNA
....4 DQ701 0501-000434 TR-SMALL SIGNAL;KTC3875S-GR,NPN,150mW,SO 1 SA
....4 DQ401 0501-000669 TR-SMALL SIGNAL;KTA1505Y,PNP,150mW,SOT-2 1 SA
....4 DQ402 0501-000669 TR-SMALL SIGNAL;KTA1505Y,PNP,150mW,SOT-2 1 SA
....4 DQ703 0501-000669 TR-SMALL SIGNAL;KTA1505Y,PNP,150mW,SOT-2 1 SA
....4 DQ704 0501-000669 TR-SMALL SIGNAL;KTA1505Y,PNP,150mW,SOT-2 1 SA
....4 IC104 0801-002095 IC-CMOS LOGIC;74LCX245,TRANSCEIVER,TSSOP 1 SA
....4 IC104 0801-002237 IC-CMOS LOGIC;74V(A)HC1G04,INVERTER,SC70 1 SA
....4 IC104 0801-002394 IC-CMOS LOGIC;74LCX32,OR GATE,SOIC,14P,1 1 SA
....4 IC104 0801-002407 IC-CMOS LOGIC;74LCX08,AND GATE,SOIC,14P, 1 SA
....4 IC104 0801-002683 IC-CMOS LOGIC;74HCT245,TRANSCEIVER,TSSOP 1 SA
....4 IC104 0801-002709 IC-CMOS LOGIC;74HC373,D FLIP-FLOP,TSSOP, 1 SA
....4 IC104 0801-002709 IC-CMOS LOGIC;74HC373,D FLIP-FLOP,TSSOP, 1 SA
....4 IC107 1002-001227 IC-D/A CONVERTER;CS4340-KSR,24BIT,SOP,16 1 SA
....4 DU402 1006-001165 IC-LINE TRANSCEIVER;MAX3243CDBR,SSOP,28P 1 SA
....4 IC113 1105-001305 IC-DRAM;4S641632,-,64MBIT,1MX16X4BIT,TSO 1 SA
....4 IC113 1105-001308 IC-DRAM;K4S281632,128Mbit,8Mx16,TSOP,54P 1 SA
....4 DU701 1203-001824 IC-VOL. DETECTOR;7042,SOT-89,3P,-,PLASTI 1 SA
....4 T0087 1203-002842 IC-POSI.FIXED REG.;AP1117D-33A,TO-252,3P 1 SA
....4 DU101 1204-002400 IC-DECODER;STI5517SUA,PBGA,416P,27x27mm, 1 SA
....4 DR155 2007-000052 R-CHIP;10Kohm,1%,1/10W,TP,1608 1 SA
....4 DR156 2007-000052 R-CHIP;10Kohm,1%,1/10W,TP,1608 1 SA
....4 DR140 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA
....4 DR154 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA
....4 DR158 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA
....4 DR159 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA
....4 DR811 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA
....4 DR812 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA
....4 DR907 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA
....4 OR112 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA
....4 OR113 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA
....4 DR1102 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR111 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR116 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR169 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR170 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR174 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR176 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR182 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR183 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR184 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR185 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR186 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR187 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR195 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR196 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR197 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR198 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR199 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR202 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR203 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR204 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR501 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR902 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR905 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR906 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR916 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR917 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
6-2
6 Electrical Parts List
Level Loc. No. Code No. Description & Specification Q'ty SA/SNA
....4 DR923 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA
....4 DR104 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR105 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR1101 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR112 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR113 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR118 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR119 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR120 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR121 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR122 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR123 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR124 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR125 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR126 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR127 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR128 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR129 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR130 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR131 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR137 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR138 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR145 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR146 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR147 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR148 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR149 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR150 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR151 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR152 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR160 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR161 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR166 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR171 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR172 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR175 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR180 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR181 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR200 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR201 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR221 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR400 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR401 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR402 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR403 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR404 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR405 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR406 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR407 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR419 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR704 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 DR162 2007-000076 R-CHIP;330ohm,5%,1/10W,TP,1608 1 SA
....4 DR163 2007-000076 R-CHIP;330ohm,5%,1/10W,TP,1608 1 SA
....4 DR164 2007-000076 R-CHIP;330ohm,5%,1/10W,TP,1608 1 SA
....4 DR165 2007-000076 R-CHIP;330ohm,5%,1/10W,TP,1608 1 SA
....4 DR502 2007-000078 R-CHIP;1Kohm,5%,1/10W,TP,1608 1 SA
....4 DR503 2007-000078 R-CHIP;1Kohm,5%,1/10W,TP,1608 1 SA
....4 DR505 2007-000078 R-CHIP;1Kohm,5%,1/10W,TP,1608 1 SA
....4 DR702 2007-000078 R-CHIP;1Kohm,5%,1/10W,TP,1608 1 SA
....4 DR114 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
6-3
6 Electrical Parts List
Level Loc. No. Code No. Description & Specification Q'ty SA/SNA
....4 DR139 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
....4 DR141 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
....4 DR142 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
....4 DR143 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
....4 DR144 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
....4 DR153 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
....4 DR417 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
....4 DR418 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
....4 DR701 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
....4 DR703 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
....4 DR705 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
....4 DR707 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 SA
....4 DR117 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR177 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR178 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR179 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR188 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR189 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR190 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR191 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR192 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR193 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR194 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR416 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR423 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR424 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR632 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR633 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR901 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR903 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR904 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR918 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR919 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR920 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR921 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR922 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 1 SA
....4 DR700 2007-000097 R-CHIP;47Kohm,5%,1/10W,TP,1608 1 SA
....4 DR706 2007-000097 R-CHIP;47Kohm,5%,1/10W,TP,1608 1 SA
....4 DR102 2007-000102 R-CHIP;100Kohm,5%,1/10W,TP,1608 1 SA
....4 DR408 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR409 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR410 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR411 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR412 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR413 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR414 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR415 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR601 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR908 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR909 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR910 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR911 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA
....4 DR912 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608