Text preview for : 00front.pdf part of Nokia 9110 Nokia 9110 Service Manual
Back to : Nokia 9110 Service Manual | Home
Programs After Market Services (PAMS) Technical Documentation
SERVICE MANUAL
[NMP Part No.0275406]
RAE2 CELLULAR PHONE/ PERSONAL DIGITAL ASSISTANT
RAE2 ORIGINAL 02/99
Copyright E 1999. Nokia Mobile Phones. All Rights Reserved.
RAE2 Foreword
PAMS Technical Documentation
AMENDMENT RECORD SHEET
Amendment Number Date Inserted By Comments Original
02/99
Page 2
Original 02/99
PAMS Technical Documentation
RAE2 Foreword
RAE2 SERVICE MANUAL OVERALL CONTENTS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Overview of NOKIA communicator Baseband Module RF Modules UIF Modules PDA module Service Software Troubleshooting / Disassembly Service Tools List of Variants Schematic / Component Layout Diagrams Parts Lists Quick Guide Accessories Vehicle Installation Guide
Original 02/99
Page 3
RAE2 Foreword
PAMS Technical Documentation
IMPORTANT This document is intended for use by qualified service personnel only.
Company Policy
Our policy is of continuous development; details of all technical modifications will be included with service bulletins. While every endeavour has been made to ensure the accuracy of this document, some errors may exist. If any errors are found by the reader, NOKIA MOBILE PHONES Ltd should be notified in writing. Please state: Title of the Document + Issue Number/Date of publication Latest Amendment Number (if applicable) Page(s) and/or Figure(s) in error Please send to: Nokia Mobile Phones Ltd PAMS Technical Documentation PO Box 86 24101 SALO Finland
Page 4
Original 02/99
PAMS Technical Documentation
RAE2 Foreword
Warnings and Cautions
Please refer to the phone's user guide for instructions relating to operation, care and maintenance including important safety information. Note also the following:
Warnings:
CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTISKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION. IF NECESSARY, CONSULT THE VEHICLE DEALER/MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RF ENERGY THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE ATMOSPHERES EG PETROL STATIONS (SERVICE STATIONS), BLASTING AREAS ETC. OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLULAR TELEPHONES, MAY INTERFERE WITH THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT A PHYSICIAN OR THE MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS. OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO INTERFERENCE. CLASS 1 LASER PRODUCT. See IEC608251 specification: 8251; 5: Labelling, 5.1: General, 5.2: Class 1
Cautions:
1. 2. 3. 4. 5 Servicing and alignment must be undertaken by qualified personnel only. Ensure all work is carried out at an antistatic workstation and that an antistatic wrist strap is worn. Ensure solder, wire, or foreign matter does not enter the telephone as damage may result. Use only approved components as specified in the parts list. Ensure all components, modules screws and insulators are correctly refitted after servicing and alignment. Ensure all cables and wires are repositioned correctly. All PC's used with NMP Service Software for this produce must be bios and operating system "Year 2000 Compliant"
6
Original 02/99
Page 5
RAE2 Foreword
PAMS Technical Documentation
This page intentionally left blank.
Page 6
Original 02/99