Text preview for : 13acce.pdf part of Nokia 9110 Nokia 9110 Service Manual
Back to : Nokia 9110 Service Manual | Home
PAMS Technical Documentation RAE2 Series PDA
Chapter 13
Accessories
Original 02/99
Copyright E 1999 Nokia Mobile Phones. All rights reserved.
RAE2 Accessories
PAMS Technical Documentation
AMENDMENT RECORD SHEET
Amendment Number Date Inserted By Comments Original
02/99
Page 13 2
Original 02/99
PAMS Technical Documentation
RAE2 Accessories
CONTENTS Page No
Units and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Headset HDC-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . List of Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Desktop Charger DCH7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Connector View Desk Stand . . . . . . . . . . . . . . . . . . . . Interconnection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handset HSU1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use of Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Memory Card MMC DTS4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fast Travel Charger ACP9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RS232 Adapter Cable DLR2 (073077) . . . . . . . . . . . . . . . . . Cigarette Lighter Charger LCH9 (0675005) . . . . . . . . . . . . . 13 4 13 5 13 5 13 5 13 6 13 6 13 7 13 8 13 9 13 9 13 9 13 10 13 11 13 11 13 11 13 12 13 13
Original 02/99
Page 13 3
RAE2 Accessories
PAMS Technical Documentation
Units and Accessories
All RAE2N accessories are nonserviceable.
Table 1. List of Units and Accessories Name of unit or accessory Battery Performanace Travel Charger Headset Advanced Deskstop Stand RS232 Adapter Cable Carrying Case Memory Card Advanced HF Car Kit Privacy Handset Mobile Charger Upgrade HF Car Kit Type code BLN3 ACP9 HDC8 DCH7 DLR2 CBR4 DTS4 CARK99 HSU1 LCH9 CARK102 Removable memory card. MMC Includes synchronization button for PC connection Notes 1030 mAh, LiIon
Page 13 4
Original 02/99
PAMS Technical Documentation
RAE2 Accessories
Headset HDC-8
Connect the HDC8 to the bottom connector of phone, and it is ready to use. The push button at microphone part can be used for answering and ending the call.
Figure 1.
HDC8
Technical Summary
HDC8 headset contains a microphone, a speaker, EMIcomponents and CONTROL button . Headset will be connected straight to the bottom connector of the phone. Headset can be used also with the car kit.
List of Modules
Headset HDC8
Original 02/99
Page 13 5
RAE2 Accessories
PAMS Technical Documentation
Desktop Charger DCH7
Desktop charger DCH7 is designed for the charging of the RAE2 PDA and a spare battery.
Figure 2.
DCH7 Desk Stand
Technical Summary
The desktop charger DCH7 is a twoslot stand designed to be placed on a desktop. The front slot holds and charges the phone, and the rear slot holds and charges a spare battery. The desk stand includes red and green LEDs to show the status of the spare battery charging in the rear slot. The desk stand supports charging of 4.1V and 4.2V lithiumion batteries. The desk stand is powered by an external ACP9A/E/U/X performance travel charger. When a RAE2 is placed in the front slot it is charged at the same rate as if the external charger was connected directly to the phone. When a spare battery is placed in the rear slot, it is charged at a slower rate. Charging of the spare battery is delayed until the phone has finished charging. The front slot provides data connection between the deskstand connected PC and the RAE2. The host PC is connected by Nokia data cable to the Original 02/99
Page 13 6
PAMS Technical Documentation
RAE2 Accessories
rear of the desk stand. The PC must have the Nokia "Share" software running for the data transfer to the PC to be successful.
Rear Connector View Desk Stand
The rear connector allows for the Nokia PC data cable to be connected to the Spock whilst in the desk stand. The cable is connected to the rear of the desk stand and the desk stand provides routing of the signals to the Spock phone. The rear connector provides for connection of the charger to the desk stand.
Figure 3.
DCH7 Deskstand
The desk stand provides a convenient push button, called a "Share" button to initiated the phone to PC data synchronization. The data transfer from the phone to the PC is then achieved via the phone serial data link [Fbus]. The Nokia Data cable is required for connection of the desk stand to the PC.
Original 02/99
Page 13 7
RAE2 Accessories
PAMS Technical Documentation
Interconnection Diagram
PC
serial cable Fbus to Rs232 DESKSTAND Fbus CHARGER Front slot
PHONE
SPARE BATTERY 3wire AC supply
Figure 4.
DCjack Rear slot
Interconnection Diagram
Page 13 8
Original 02/99
PAMS Technical Documentation
RAE2 Accessories
Handset HSU1
The main function of the HSU1 Audio Handset is to form an electroacoustic interface between the user and the phone environment.
HSU1
Technical Summary
The HSU1 Audio Handset consists of handset with coil cord and of cradle. In the handset there is earphone and microphone with corresponding amplifiers. There is also a simply interface for controlling these functions. Electronics consist of DG1 handset module. Mechanical dimensions are small and mechanics consists of Acover, B cover and coil cord with the cradle. The HSU1 Audio Handset has a volume potentiometer.
Use of Handset
The HSU1 Audio Handset is designed to be a dummy handset with no display and no keyboard. Its use is to form an electroacouistical connection between the user and DCT environment. When not in use the handset is on the cradle. During the use the handset is lifted from the cradle and audio paths are opened.
Original 02/99
Page 13 9
RAE2 Accessories
PAMS Technical Documentation
Memory Card MMC DTS4
The PDA includes a synchronous serial interface that is compatible with the Multimedia Card Bus (MMC) Protocol. The MMC is a changeable Flash or ROM memory card with variable memory size. The MMC connector is located on the BS8 Module..
1 2 3 4 5 6 7
32mm
24mm
1.5mm
Figure 5. DTS4 Dimensions
Page 13 10
Original 02/99
PAMS Technical Documentation
RAE2 Accessories
Fast Travel Charger ACP9
Operating within the voltage range 90 V...264 V AC (50 Hz...60 Hz), the Fast Travel Charger is practically current independent in normal office and household use. Like the standard charger, it is compatible with all battery options and is available for different wall sockets. The Fast Travel Charger can also be used with basic stand and desktop stand.
ACP9E
ACP9U ACP9X ACP9A
Product Codes
Fast Travel Charger (Euro plug) 90264 Vac Fast Travel Charger (US plug) 90264 Vac Fast Travel Charger (UK plug) 90264 Vac Fast Travel Charger (Australia) 90264 Vac Output cable PCC1 (supplied with ACP9): ACP9E ACP9U ACP9X ACP9A 0675149 0675151 0675150 0675152
0730076
Specification
Output connectors: 3.5 mm DC plug, 3pole (+, , control) Protection:
output current limiting, max. 850 mA output voltage limiting, max. 9.3 V (unloaded) 8.4 V / 800 mA
Output voltage/current (typ):
Original 02/99
Page 13 11
RAE2 Accessories
PAMS Technical Documentation
RS232 Adapter Cable DLR2 (073077)
Purpose Cable length D connector Stereo connector Connects an external computer with RAE1N (via PAR1) see below 950mm "25 mm (3 wire, 3.5 mm) D9 connector female Stereo plug (2.5 mm) with 3.5 mm strain relief
Page 13 12
Original 02/99
PAMS Technical Documentation
RAE2 Accessories
Cigarette Lighter Charger LCH9 (0675005)
Purpose Charger type Operation Protection Connectors Weight Cable
charging adapter for car environment; input voltage 9...32 V Switching mode power supply quick charge (< 0.52.5 h), trickle charge input fused, output current limit output: 3.8 mm standard DC plug; input: D 21 / 23 mm <120 g 2 m curly cable
NOTE! The current version of LCH2 does not indicate (led illumination) in a correct way what is the status of the charging with Li batteries. For quick car installation, the user can utilise the Cigarette Lighter Charger LCH2, Power Adapter PAR1, and RS232 serial cable DLR1 Mobile Holder MBR1 cannot be used in this context.
Original 02/99
Page 13 13
RAE2 Accessories
PAMS Technical Documentation
This page intentionally left blank.
Page 13 14
Original 02/99