Text preview for : EF6C full unit assembly.pdf part of Optima Centoris G300 Series Optima Centoris G300 Series Service PDF
Back to : Centoris G300 Series Serv | Home
A S S E M B L Y
P R O C E D U R E
Chapter
Assembly Procedure
H D D M O D U L E
HDD Module
The below illustrations show how to install the HDD module onto the notebook.
H D D M O D U L E
Assembling HDD Module
A S S E M B L Y
1. Fasten 4 screws on both side of the HDD module. M3.0*3.5(K) B-NI. PN: MS30035I354 Twist force: 2.5+/-0.2KG/CM Number 1 cross screwdriver
H D D
M O D U L E
Installing HDD Module
I N S T A L L
1. Push the HDD module into front side of notebook.
3-1
A S S E M B L Y
P R O C E D U R E
2. Fasten 2 screws to fix bottom of notebook. M2.5*6.0 PN: MS25060IWJ4 Twist force: 2.5+/-0.2KG/CM Number 1 cross screwdriver
M E M O R Y M O D U L E
Memory Module
The below illustrations show how to install the Memory module onto the notebook.
Installing Memory module
M E M O R Y I N S T A L L
1.
Insert RAM at the same 45° angles and press down until it clicks into the latches
3-2
A S S E M B L Y
P R O C E D U R E
2.
Assemble RAM door and fasten screw to fix
C P U
CPU Module
Installing CPU
The illustrations below show how to install the CPU module onto the notebook. The module contains CPU, CPU thermal pad and CPU heatsink module.
C P U I N S T A L L
1.
Use the CPU vacuum to "suck up" the CPU and place on CPU socket properly.
2.
To lock CPU with minus screw driver and follow the arrow direction.
3-3
A S S E M B L Y
P R O C E D U R E
3.
Assemble thermal module, secure 4pcs screw to fix the whole CPU thermal module. M2.5*4.0 PN: MS25040WH1 Twist force: 2.5+/-0.2KG/CM Number 1 cross screwdriver
4
3
4.
Fasten 1pcs screw on the fan, Meantime, connect the CPU FAN cable. M2.5*6.0 PN: MS25060IWJ4 Twist force: 2.5+/-0.2KG/CM Number 1 cross screwdriver
3-4
A S S E M B L Y
P R O C E D U R E
R O M
D R I V E R
Installing ROM driver
I N S T A L L
Install ODD module into system and fasten total 3pcs screw 1:Fasten 2pcs screw M2.0*3.0 PN: MM20030ICI3 Twist force: 2.0+/-0.2KG/CM Number 1 cross screwdriver 1
3-5
A S S E M B L Y
P R O C E D U R E
2: Fasten 1pcs screw on the base. M2.5*6.0 PN: MS25060IWJ4 Twist force: 2.5+/-0.2KG/CM Number 1 cross screwdriver 2
W I R E L E S S M O D U L E I N S T A L L
Installing Wireless Module
1. Carefully to organize the antenna cable
2. Install wireless card onto MiniPCI slot, fasten antenna cable.
3-6
A S S E M B L Y
P R O C E D U R E
3.
Assemble MINIPCI door, then fasten screws
K / B
M O D U L E
Keyboard Module
The illustration below shows how to install the K/B cover and keyboard plate. Installing Keyboard Cable 1. Use a flexible connector tool to lock the cable connector on both ends.
C A B L E I N S T A L L
2. Cable out 1. Unlock
1. Unlock
3. Lock
3. Lock
3-7
A S S E M B L Y
P R O C E D U R E
K / B
C O V E R
Installing K/B cover
Install the K/B cover
I N S T A L L
B A T T E R Y I N S T A L L
Battery module
Install battery pack into battery slot properly.
3-8
A S S E M B L Y
P R O C E D U R E
3-9