Text preview for : Alpine-TMEM710 car lcd moni.pdf part of Alpine TMEM710 car lcd monitor



Back to : Alpine-TMEM710 car lcd mo | Home

SERVICE MANUAL
6.5-INCH WIDE LCD MONITOR

* The model is component system unit of Monitor Unit and AV Interface Unit. Caution : The part marked with ! is generating a high voltage, so care will be necessary when working.

TO ALPINE Home Page

4 / 05-A 68E38530S01

TME-M710


The following cautions will prevent accidents in the workplace and will ensure safe products. *The symbols indicate caution is needed to prevent injuries and damage to property. The symbols and their meanings follow. If you ignore this symbol and handle the product incorrectly or unsafely, serious injury or death may result. If you ignore this symbol and handle the product incorrectly or unsafely, injury or only material damage may result.

Warning Caution

*The following symbols indicate two levels of cautions. When you see this symbol, you have to be very careful.

When you see this symbol, you have to follow the instructions there.

Warning
Do not look squarely into the laser light coming from the pickup.
You may loose you sight.

Fuse Caution
Always use a designated fuse. Use of an incorrect fuse may result in a fire.

Caution
Do not allow wiring to be caught in the screw/chassis.
If wiring is caught in the screw/chassis, it may cause a short circuit, resulting in a fire.

Battery Caution
Use the designated battery. Confirm the correct polarity and seat of the battery. An incorrect battery or an improperly connected or seated battery may result in a fire.

High Temperature Caution
Touching the heat sink may cause severe burns.

Designated Parts Caution
Look up the part list and ensure that only designated parts are used to prevent problems or accidents.

Reverse Power Supply Connections or Misconnections Caution
Reverse power supply connections or misconnections may cause ignition problems and smoke may result.

Wiring Caution
Ensure that the wiring is correct when rewiring to prevent problems with ignition/breakdown.

Soldering Caution
Hot solder from solder splash may cause severe burns.

Wear Gloves
Wear gloves to prevent electrical shocks or injury from the end face of the metal.

-2-

TME-M710

Contents Packing Assembly Parts List Packing Method View Specifications System Connections Adjustment Procedures Extension Cable < Monitor Unit > < AV Interface Unit >

4 4 5 6 to 9 10 to 14 15 16 to 25 26 to 36

NOTE : Due to continuing product improvement, specifications and designs are subject to change without notice.

-3-

TME-M710

Packing Assembly Parts List
Symbol No.
#1 $1 %1 &1 101 101 101 101 102

Part No.
01E38563S01 01E38578S01 01E38578S01 01E38578S01 01E38564S01 68-02278Z73 68-02278Z74

Description
ASS'Y,POWER WIRE ASS'Y,POWER WIRE ASS'Y,POWER WIRE ASS'Y,POWER WIRE ASS'Y,I/F CABLE 20P MANUAL,OWNER'S MANUAL,OWNER'S

Symbol No.
%1 103 &1 103 104 105 #1 106 $1 107

Part No.
68-02278Z74 68-04094Z09 03E38574S01 75E26094S01 01E38562S01

Description
MANUAL,OWNER'S O/M,AOCH M710 SCR,M4X14(WP)(BLK) TAPE,PAD-MAGIC PARKING,PIN WIRE

#1 103 $1 103

01E37298S01 ASS'Y,MONI STAND KIT

NOTE : #1:For North American Model Only, $1:For European Model Only, %1:For General Foreign Model Only, &1:For Chinese Model Only, Others:Common.

Packing Method View
103
TOP

NOTE : #1:For North American Model Only, $1:For European Model Only, Others:Common.

105

X2

104 X4

102

$1
107

101

#1
106

AV Interface Unit Monitor Unit

TO CONTENTS -4-

TME-M710

Specifications

Screen Size ......................................................................................................................................... Drive System Light Source 6.5-Type Wide Display System ........................................................... Low Reflection Rear Projection Type TN Liquid Crystal Panel ........................................................................................... Active Matrix Drive, Nomally White Display ...................................................................... 280,800 pcs. (H : 1,200 x V : 234 Dots) ........................................................ Internal Optical System (U-Type Cold Cathode Fluorescent Tube) Number of Picuture Elements