Text preview for : pioneer_cmx-3000,cu-v163_rrv2537_[ET].pdf part of Pioneer CMX-3000 Service manual
Back to : pioneer_cmx-3000,cu-v163_ | Home
CU-V163
ORDER NO.
CMX-3000
RRV2537
COMPACT DISC PLAYER
CMX-3000
REMOTE CONTROLLER
CU-V163
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Type
KUCXJ WYXJ RLBXJ
Model Power Requirement CMX-3000 CU-V163 Remarks
-
AC120V AC220- 240V AC110-120V/ 220-240V DC Power supply from other system
CONTENTS
1. SAFETY INFORMATION ....................................... 2 2. EXPLODED VIEWS AND PARTS LIST ................. 5 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM 12 4. PCB CONNECTION DIAGRAM ........................... 35 5. PCB PARTS LIST ................................................ 50 6. ADJUSTMENT ..................................................... 55
7. GENERAL INFORMATION .................................. 7.1 DIAGNOSIS ................................................... 7.1.1 SERVICE MODE ................................... 7.1.2 STARTING SEQUENCE ........................ 7.1.3 DISASSEMBLY ..................................... 7.2 PARTS .......................................................... 7.2.1 IC ........................................................... 8. PANEL FACILITIES AND SPECIFICATIONS .......
57 57 57 62 63 68 68 82
For details, refer to "Important symbols for good services" on "service information".
PIONEER CORPORATION
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2001
T ZZY NOV. 2001 Printed in Japan
CMX-3000, CU-V163
1. SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician.
WARNING This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. Health & Safety Cod e Section 25249.6 Proposition 65
NOTICE (FOR CANADIAN MODEL ONLY) Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement parts must be of identical designation. REMARQUE (POUR MODÈLE CANADIEN SEULEMENT) Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur CCI indiquent que les pièces de remplacement doivent avoir la même désignation.
(FOR USA MODEL ONLY) 1. SAFETY PRECAUTIONS
The following check should be performed for the continued protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Measure leakage current to a known earth ground (water pipe, conduit, etc.) by connecting a leakage current tester such as Simpson Model 229-2 or equivalent between the earth ground and all exposed metal parts of the appliance (input/output terminals, screwheads, metal overlays, control shaft, etc.). Plug the AC line cord of the appliance directly into a 120V AC 60 Hz outlet and turn the AC power switch on. Any current measured must not exceed 0.5 mA.
ANY MEASUREMENTS NOT WITHIN THE LIMITS OUTLINED ABOVE ARE INDICATIVE OF A POTENTIAL SHOCK HAZARD AND MUST BE CORRECTED BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER.
2. PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in the appliance have special safety related characteristics. These are often not evident from visual inspection nor the protection afforded by them necessarily can be obtained by using replacement components rated for voltage, wattage , etc. Replacement parts which have these special safety characteristics are identified in this Service Manual. Electrical components having such features are identified by marking with a on the schematics and on the parts list in this Service Manual. The use of a substitute replacement component which does not have the same safety characteristics as the PIONEER recommended replacement one, shown in the parts list in this Service Manual, may create shock, fire, or other hazards. Product Safety is continuously under review and new instructions are issued from time to time. For the latest information, always consult the current PIONEER Service Manual. A subscription to, or additional copies of, PIONEER Service Manual may be obtained at a nominal charge from PIONEER.
Device under test
Test all exposed metal surfaces
Leakage current tester
Reading should not be above 0.5 mA
Also test with plug reversed (Using AC adapter plug as required) Earth ground
AC Leakage Test
2
CMX-3000, CU-V163
IMPORTANT THIS PIONEER APPARATUS CONTAINS LASER OF CLASS 1. SERVICING OPERATION OF THE APPARATUS SHOULD BE DONE BY A SPECIALLY INSTRUCTED PERSON.
LASER DIODE CHARACTERISTICS MAXIMUM OUTPUT POWER: 5 mW WAVELENGTH: 780 785 nm
WARNING ! The AEL(accessible emission level) of the laser power output is less then CLASS 1 but the laser component is capable of emitting radiation exceeding the limit for CLASS 1. A specially instructed person should servicing operation of the apparatus.
LABEL CHECK
CMX-3000/ WYXJ type Only
CMX-3000/ RLBXJ type Only
Additional Laser Caution
1. Laser Interlock Mechanism The position of the switch (S801,S901) for detecting loading completion is detected by the system microprocessor, and the design prevents laser diode oscillation when the switch is not in LPS1 terminal side (when the mechanism is not clamped and LPS1 signal is high level.) Thus, the interlock will no longer function if the switch is deliberately set to LPS1 terminal side. ( if LPS1 signal is low level ). In the test mode the interlock mechanism will not function. Laser diode oscillation will continue, if pin 9 of TA2153FN (IC1010, IC1003) on the MAIN ASSY is connected to GND, or pin 10 of IC1010, IC1003 (LDON) is connected to low level (ON), or else the terminals of Q1003, Q1229 are shorted to each other (fault condition). Note: S801, IC1010 and Q1003 (Player A Side) S901, IC1003 and Q1229 (Player B side) 2. When the cover is opened, close viewing of the objective lens with the naked eye will cause exposure to a Class 1 laser beam. : Refer to page 55.
CMX-3000/ KUCXJ type Only
Printed on the Rear Panel.
3
CMX-3000, CU-V163
SERVICE INFORMATION
[ Important symbols for good services ]
In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely. When you find the procedures bearing any of the symbols, be sure to fulfill them:
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual.
2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable. In accordance with the procedures or instructions described in this manual, adjustments should be performed.
3. Cleaning
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning, proper cleaning should be performed to restore their performances.
4. Shipping mode and shipping screws
To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or the shipping screws should be installed before shipping out in accordance with this manual, if necessary.
5. Lubricants, glues, and replacement parts
Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed ones should be used.
[ NOTES ON SERVICING ]
7 CLEARNING
Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools: Position to be cleaned Pickup leneses Cleaning tools Cleaning liquid : GEM1004 Cleaning paper : GED-008
4
CMX-3000, CU-V163
2. EXPLODED VIEWS AND PARTS LIST
NOTES:
· Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. · The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. · Screws adjacent to mark on the product are used for disassembly. · For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.) 7 8 8 1 3
2.1 PACKING
6 4 7
(1) PACKING PARTS LIST
Mark No.
NSP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Description
Part No.
KUXJ type Only 2 5
9
AC Power Cord See Contrast table (2) Limited warranty See Contrast table (2) Specialized connection cable for the remote controller (L=3 m) DDE1122 Forced ejection pin DEX1013 Operating Instructions See Contrast table (2) Caution Tag Control cord (L=1 m) Audio cable (L=1.5 m) Polyethylene Bag Pad A Pad B Packing Case Sheet Caution 220V Label Label DRW1897 PDE1267 VDE1064 Z21-038 DHA1529 DHA1530 See Contrast table (2) RHX1006 See Contrast table (2) See Contrast table (2)
NSP
14 RLBXJ type Only 13 NSP
11
10
10
13 11 12
KUCXJ and WYXJ type Only 15
(2) CONTRAST TABLE
CMX-3000/KUXJ, WYXJ and RLBXJ are constructed the same except for the following:
Part No. Mark No.
1 2 5 5 5 12 14 15
Symbol and Description KUCXJ Type WYXJ Type
ADG1154 Not used Not used DRB1306 Not used DHG2158 Not used VRW1629
Remarks RLBXJ Type
ADG1154 Not used Not used Not used DRB1308 DHG2161 ARR1003 Not used ADG7022 ARY7043 DRB1307 Not used Not used DHG2160 Not used VRW1629
NSP
AC Power Cord Limited warranty Operating Instructions (English) Operating Instructions (English/ French/ German/ Italian/ Dutch/ Spanish) Operating Instructions (English/ Spanish/ Chinese) Packing Case Caution 220V Label Label
NSP
5
CMX-3000, CU-V163 2.2 EXTERIOR SECTION
32 49 44 50 42 42 41 6
C
17 26 18 14
I
8
17 41
41
J J
12
G
H G
E
9 41
E
13 26 41 18 12 9
L M
52 44 14
N
41
H
41
I B
55 29 41 40 48 41 45
48
F
11
37
A
41
K
45 39
Refer to "2.3 SLOT-IN MECHANISM ASSY"
48 40
57
1
22 41 45 41 45 41 23
47 28 45
B F E
24 20
41 28 2 41
E F
51 43 15 3 41
41
54 47 5 30 36 34
D A
B
B
45
53 28 C 20 41
F
10
41
4
H
D
41 47
C
35 38 27 41 55
G D
K L M N
7
21 19 39 19 56 31
46 56 33
A
41 55
29
58
46 41
25
Refer to "2.3 SLOT-IN MECHANISM ASSY"
6
CMX-3000, CU-V163
(1) EXTERIOR SECTION PARTS LIST
Mark No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Description
MAIN ASSY PWRB ASSY ACIN ASSY REGB ASSY FRSW ASSY SLM1 ASSY SLM2 ASSY JACB ASSY Leadcard 16p Power Transfomer Connector Ass'y Connect0r Ass'y (6p) Connector Assy Connector Ass'y Fuse (FU101) ····· Rubber Spacer Silicon Rubber D5 L Insulator Front Sheet B Chassis Rear Panel PCB Frame Panel Stay Bottom Plate Heat Sink Locking Card Spacer Sheet Earth Spring Eject Knob
Part No.
DWG1556 See Contrast table (2) See Contrast table (2) See Contrast table (2) DWS1314 DWS1315 DWS1316 See Contrast table (2) DDD1194 See Contrast table (2) PF05FE-D17 PF06PP-B47 PF09EE-D25 PG03KK-E15 See Contrast table (2) DEB1455 DEB1456 DEC2348 DEC2467 DNA1277 See Contrast table (2) DNH2502 DNH2503 DNH2505 DNH2508 VEC1596 DED1159 DBH1398 DEB1503
Mark No.
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 NSP 56 57 58
Description
Front Panel Bonnet Case Function Panel Power Knob Caver Power Knob Slide SW Knob 65 Label Label POM Bush (M3) Screw Screw Screw Screw Screw Screw Screw Rivet (Plastic) Cord Clamper (Steel) Caution Label HE Caution Label Trans Sheet Caution Label Screw Guard Binder Screw Caution Label Protect Sheet Spacer (PEE)
Part No.
DNB1098 DNE1409 DNK3944 DNK3945 DNK3946 DNK3947 See Contrast table (2) VRW-548 DEC2397 BBZ26P060FMC BBZ30P060FMC BBZ30P060FZK BBZ40P060FMC BBZ40P060FZK BPZ30P080FZK CBZ30P080FZK RBM-003 RNH-184 See Contrast table (2) See Contrast table (2) DEC2280 See Contrast table (2) DEB1447 ZCA-SKB90BK BBZ30P080FMC See Contrast table (2) See Contrast table (2) DEC2470
NSP
NSP
NSP
(2) CONTRAST TABLE
CMX-3000/KUXJ, WYXJ and RLBXJ are constructed the same except for the following:
Mark No. Symbol and Description KUCXJ Type
2 3 4 8 10 10 10 15 15 22 37 49 50 52 56 57 PWRB ASSY ACIN ASSY REGB ASSY JACB ASSY Power Transfomer (AC120V) Power Transfomer (AC220-240V) Power Transfomer (AC110-120V/220-240V) Fuse (FU101: 1.6A) Fuse (FU101: 1.0A) Rear Panel 65 Label Caution Label HE Caution Label Caution Label Caution Label Protect Sheet DWR1345 DWR1349 DWR1357 DWX2214 DTT1161 Not used Not used REK1077 Not used DNC1586 ARW7050 Not used Not used Not used DRW1975 Not used
Part No. Remarks WYXJ Type
DWR1345 DWR1346 DWR1347 DWX2200 Not used DTT1160 Not used Not used REK1022 DNC1585 Not used PRW1233 VRW1094 Not used Not used DEC2466
RLBXJ Type
DWR1348 DWR1346 DWR1347 DWX2200 Not used Not used DTT1162 Not used REK1022 DNC1587 Not used Not used Not used DRW2102 Not used DEC2466
NSP
7
CMX-3000, CU-V163 2.3 SLOT-IN MECHANISM SECTION
Paint grease the inner surface of the wall. Grease (GYA1001) (ZLB-PN397B)
11
13
10 7
Paint on side of axle.
22 21 9 16
12
Grease (GYA1001) (ZLB-PN397B)
15 17 23
Paint grease the inner surface of the wall.
8
Dyefree (GEM1023) (ZLX-ME413A)
18
Grease (GYA1001) (ZLB-PN397B)
19 20 5 24 28 14 26
1
To MAIN Assy
25
26
Cleaning liquid (GEM1004) Cleaning paper (GED-008)
27 6 6 3 2 4 2
8
CMX-3000, CU-V163
· SLOT-IN MECHANISM SECTION PARTS LIST
Mark No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
Description
Connector Ass'y Float Fastener Float Spring F Float Spring R Spacer Por (T3) Float Rubber Clamp Spring Guide Spring Sw.Lever Spacer (Pet) Clamp Magnet Yoke Loading Lever Main Cam Disc Guide Clamp Arm Loading Base Assy-S Eject Lever Lever AP Lever BP Worm Gear Loading Gear Drive Gear Clamper Loading Motor Mecha Base Binder CD Mechanism Loading Motor Assy-S
Part No.
DKP3565 DBA1139 DBH1491 DBH1492 DEB1467 DEB1506 DBH1374 DBH1375 DEC2420 DMG1008 DNH2504 DNK3406 DNK3407 DNK3478 DNK3576 DEA1022 DNK3684 DNK3835 DNK3836 DNK3410 DNK3409 DNK3565 DNK3949 DXM1173 DNK3948 ZCA-SKB90BK DA11T3CNPIO DXX2510
NSP
NSP
9
CMX-3000, CU-V163 2.4 REMOTE CONTROLLER (CU-V163)
23
12 10 16 6
A hand driver fastens a screw. The screw tightening torque 0.098 ± 0.01% [N · m]
6
Super X (GYL1004)
19
14 24 29 8 29 25
Grease is applied to three places every two pieces. Grease (GYA1014)
29
29 30 13 4
A
22
J
13 30
B
9 5
L
15
20 1 26 A
I
21 20 B
K
28 27 28 28 3
2
M
7 18 28 27 28
28 27 28 11 28
17 27
7 28 27 28 18
10
CMX-3000, CU-V163
· REMOTE CONTROLLER (CU-V163) PARTS LIST
Mark No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Description
CNTA ASSY CNTB ASSY CNNB ASSY PHTA ASSY PHTB ASSY Screw CR Spacer Jog Sheet A Slide VR Packing J Magnet Rear Panel Magnet Stay Earth Plate Retainer Panel Base Jog Ring Screw (Steel) Foot (Rubber) Steel Ball Select Knob 1 Select Knob 2 Control Panel Jog Dial Display Plate Slide Knob 65 Label Screw Screw Screw Washer
Part No.
DWG1551 DWG1552 DWG1553 DWG1554 DWG1555 ABA7022 DEB1524 DEC2468 DED1157 DMG1006 DNC1590 DNF1668 DNH2506 DNK3952 DNK3953 DNK3954 PBA1096 REC1263 VNX1006 DEB1504 DEB1505 DNB1099 DNK3950 DNK3951 DNK3955 ARW7050 BBZ30P060FMC BPZ30P080FZK CBZ30P080FZK WH30FUC
11
1
2
3
4
CMX-3000, CU-V163
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM
3.1 BLOCK DIAGRAM
A
Slot Mecha (A)
Slot mecha
A MAIN ASSY
CN801
(DOB)
(DOA)
C
A SLM1 ASSY
OP/CL POSITION SW
3 2 1
J4
PL(A) Servo Circuit
FLASH ROM(8M)
IC1200
LOAD SW
DYW1701 SDRAM(128M)
IC1408
Lod M
INSIDE SW
2 1
CN2
sled M Spdl M
B
6 5 4 3 2 1 # @ ! ~
K4S281632C
BTL driver
IC1011 LA6562
INSIDE
CN1
Servo processor IC1005 TC9495F
MCK
RESET IC1022 M51957
PU
|
1
Slot mecha
Head AMP IC1010 TA2153FN
SBOK SUBQ SBSY SFSY
16
48.0MHz = DSS1132 12.0MHz Lod_Sw INSD LOD(A) COM(A) Lod_Sw INSD LOD(B) COM(B)
toFPGA
PL(B) Servo Circuit
Sw: RSA1001
1 2 3 4 5 6 7 8 9
CLK PRGM DONE RESET
4
B
COM
V+11B V+5D GNDD V+7A GNDD V+8B VLOD FLAC1 FLAC2
/ 4 / 4
Communication I/F
1 2
F
PWRB ASSY
SET MUTE
C
AC Power Cord
IC1204 Micro Computer
CN105
Connector pin name 1 GNDD 3 RXD 5 FLAC1 7 VLOD 8 FLAC2 2 GNDD 4 V+8B 6 TXD Remoto Controller Section
JA701 JA207
(MINIDIN8P)
M CNNB ASSY
Communication I/F
J
Function Key : A
PHTA ASSY
JOG/ENCODER GP1S94 x2
Control IC
IC301
Control IC
IC501
D
FL DEL1047
PD5764A Slider- 60mm
DCV1011
DSS1131 4MHz DSS1131 4MHz
I
CNTA ASSY
12
1 2 3
5
6
7
8
CMX-3000, CU-V163
(DOA)
(DOA)
CN1011 CN201 (DOA) - (DOB)
DIGITAL OUT A DIGITAL OUT B
A
(DOB)
(DOB)
Spartan
Divider
P L L (A) VCO 3 Signals Conversion P L L (B) VCO 3 Signals Conversion
IC1009 NJM2870F25
Reg2.5v
= =
S/P I/O S/P I/O P/S I/O P/S I/O P/S
IC1409
Comparator Divider Comparator
LPF
E
JACB ASSY
LPF Master Clock
DONE RESET
XC2S30-5TQ144C
AUDIO(B) AUDIO(A)
CLK PRGM
BCK/ LRC Gerenation
VSS1084 16.9344MHz
CN1011 ^ & ¢
^ CN201 & ¢
CONTROL A B CONTROL B
(DB)
(DA)
AUDIO (A) AUDIO (B)
MCK(A)
IC1208
MM1561 Reg1.8v
MCK(B)
CLK RESET Req DSP Valid XCA56367 COM IC1402
LRCK IN AUDIO(A)
(DA)
CN201
* * I I
IC204 NJM4558
(A) (A)
_ _
DAC PE8001
IC201
AUDIO OUT A
(DB)
AUDIO(B)
+ + I I
(B)
NJM2870F18 IC1406 Reg1.8v
DAC PE8001
IC202
(B)
AUDIO OUT B
4 /
£ £ 9 9
CN1011 0 0 4 3 2 CN1012
DIGITAL OUT On/off SW
4 3 2
SIGNAL ROUTE
(A)
B
FRSW ASSY
C
J161 EJECT sw A/B
: PB A AUDIO SIGNAL
(B)
: PB B AUDIO SIGNAL
(DA) (DB)
: DIGITAL DATA A SIGNAL : DIGITAL DATA B SIGNAL : DIGITAL AUDIO A SIGNAL : DIGITAL AUDIO B SIGNAL
L PHTB ASSY
JOG/ENCODER GP1S94 x2
(DOA) (DOB)
Function Key : B
FL DEL1047
Slider- 60mm
DCV1011
D
K CNTB ASSY
13
5 6 7 8
1
2
3
4
CMX-3000, CU-V163 3.2 OVERALL WIRING DIAGRAM
A
L
PHTB ASSY (DWG1555) J502
CN501 CN503 CN703
C
SLM1 ASSY (DWS1315)
CN2
B
K
CN1008 CN1006 CN1007
CN303 CN702
CNNB ASSY (DWG1553)
A
MAIN ASSY (DWG1556)
CN1010
C
M I
CNTA ASSY (DWG1551)
CN301
E JACB ASSY (KUCXJ: DWX2214)
CN201
(WYXJ: RLBXJ: DWX2200)
JA701
D
J
J302
PHTA ASSY (DWG1554)
14
1 2 3 4
JA207
CN1009
CNTB ASSY (DWG1552)
J4
CN504 CN704
CN801
CN1
5
6
7
8
CMX-3000, CU-V163
Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST".
A
REGB ASSY (WYXJ, RLBXJ: DWR1347) (KUCXJ:DWR1357)
D
SLM2 ASSY (DWS1316)
B
J161 CN2 CN901 CN1
CN106
J151
H
FRSW ASSY (DWS1314)
J4
CN103
CN102 B
CN1004
CN1002
CN1218
CN104
F
ACIN ASSY (KUCXJ: DWR1349) (WYXJ: RLBXJ: DWR1346)
CN1012
CN1003
CN1005
C
CN202
CN105
PWRB ASSY (KUCXJ, WYXJ: DWR1345) (RLBXJ: DWR1348)
G
AN101
REK1022 REK1022 REK1077
POWER REQUIREMENT AC220- 240V 60Hz AC110- 120V/ 220-240V 50/ 60Hz AC120V 50/ 60Hz
D
15
5 6 7 8
1
2
3
4
CMX-3000, CU-V163 3.3 MAIN (1/3) ASSY
A
CN1010
(IC1204: 118pin) (IC1204: 119pin)
A 1/3 A 3/3 A 1/3 A 1/3 A 3/3
A 2/3
A 1/3
A 1/3 A 3/3 A 2/3 A 2/4 A 2/3
(L) (L) (L) (L)
MAIN ASSY (DWG1556)
(IC1204: 158pin) (IC1204: 157pin)
CN201
(IC1204: 164pin) (IC1204: 11pin)
(IC1204: 10pin)
E
A 2/3
(DB)
(DA)
A 2/3
B
A 1/3,2/3
A 2/3 A 1/3
A 1/3 A 3/3
(DOB)
(IC1204: 165pin)
A 1/3,2/3
A 2/3
(L) (L)
(DOA)
A 1/3 A 3/3
C
A 3/3 A 1/3
A 1/3
A 2/3,3/3
A 2/3
D
A 3/3
A 2/3
16
A 1/3
1
A 3/3
2
A 1/3
3 4
5
6
7
8
CMX-3000, CU-V163
A 3/3
A 1/3
A
: The power supply is shown with the marked box.
F
CN104
CN1218
B
(L) (L)
A 3/3 A 1/3
C
DYW1701
SIGNAL ROUTE
(DA)
: DIGITAL DATA A SIGNAL
(DB) (DOA) (DOB)
: DIGITAL DATA B SIGNAL : DIGITAL OUT A SIGNAL : DIGITAL OUT B SIGNAL
(L)
: LOADING MOTOR SIGNAL
A 1/3
D
A 2/3
A 2/3
A 2/3
5
6
7
A 1/3
8
17
1
2
3
4
CMX-3000, CU-V163 3.4 MAIN (2/3) and FRSW ASSYS
A
VCO Adjust -b
VCO Adjust -a
I
A 1/3
CN1012 B
A 1/3
A 1/3 A 1/3
A 1/3 A 1/3
A 1/3 A 1/3
C
A 1/3
A 1/3 A 1/3
A 1/3
(DB) (DA)
B
D
FRSW ASSY (DWS1314)
A 1/3, 3/3
A 1/3, 2/3
J161
A 3/3
A 1/3 A 3/3 A 1/3 A 1/3
18
A 2/3 B
1
2
3
4
5
6
7
8
CMX-3000, CU-V163
A 2/3
MAIN ASSY (DWG1556)
A
B
A 1/3
A 1/3
C
A 2/3
A 1/3 A 1/3 A 1/3
SIGNAL ROUTE
(DA) (DB)
D
: DIGITAL DATA A SIGNAL : DIGITAL DATA B SIGNAL
5
6
7
A 2/3
8
19
1
2
3
4
CMX-3000, CU-V163 3.5 MAIN (3/3), SLM1 and SLM2 ASSYS A 2/3
A
A 1/3
A 3/3 MAIN ASSY (DWG1556) C
CN801
SLM1 ASSY (DWS1315)
A 1/3
(DOA)
A 1/3 A 1/3
(DA) (DOA)
CN1006
B
A 2/3
A 1/3
A 1/3
(TS)
(RF)
(FS)
(FS) (TS) (RF)
Q1002 DTC114TK C
E B
(FS)
(TS) (FS)
(TS)
RF FE
C
(FS)
(TS) (FS) (RF) (FS) (FS) (TS)
3 4
1 2
(L) (L) (L)
(TS)
6 5
CN1007 CN1008
(L) (L)
(TS)
(TS)
D
E C
A 3/3
(L)
Q1003 2SA1036 (QR)
B
A 1/3
(L)
A 1/3
: The power supply is shown with the marked box.
20
A 3/3 C
1
To Slot Mecha (A) Pickup Assy
2
3
4
To Slot Mecha (A) Loading Motor
To Slot Mecha (A) Searvo Mecha
(TS) (FS) (TS) (TS) (FS)
5
6
7
8
CMX-3000, CU-V163
A 2/3 A 1/3
D
SLM2 ASSY CN901 (DWS1316)
A
A 1/3
(DOB)
A 1/3
(DB) (DOB)
CN1002
A 2/3
A 1/3
A 1/3 A 1/3
(RF) (L) (FS) (TS)
B
: RF SIGNAL ROUTE : LOADING MOTOR SIGNAL : FOCUS SERVO SIGNAL : TRACKING SERVO SIGNAL : DIGITAL DATA A SIGNAL : DIGITAL DATA B SIGNAL : DIGITAL OUT A SIGNAL : DIGITAL OUT B SIGNAL
(FS)
(DA)
(RF)
(DB) (DOA) (DOB)
(TS)
(FS)
(TS) (FS)
RF FE
(TS)
(TS)
Q1228 DTC114TK
C
E
(FS)
(RF)
B
(FS)
C
(TS) (FS)
(RF)
(FS) (FS) (TS)
3 4
1 2
(L) (L) (L)
(TS)
6 5
(L) (L) (TS)
A 3/3
E B C
A 1/3
To Slot Mecha (B) Loading Motor
CN1003 CN1004
To Slot Mecha (B) Searvo Mecha
(TS)
D
(L)
Q1229 2SA1036 (QR)
(L)
A 1/3
(FS) (TS) (TS) (FS)
To Slot Mecha (B) Pickup Assy
5
6
7
A 3/3 D
8
21
1
2
3
4
CMX-3000, CU-V163 3.6 JACB ASSY
: The power supply is shown with the marked box.
(1.5A)
A
(0.4A)
CN202
F
CN105
Q171 2SB1237
(315mA)
(A)
Q215 2SB1375
B
(500mA)
(DB)
(B)
JA208 AKN7003-
C DATA I/O
Q182 DTA143EUA
(DB)
CN201
(DB)
(DA)
(DA)
Q213 2SD2412K (RS)
A
CN1010
(DOB) (DOA)
(DOB)
(DOB)
DIGITAL OUT (B)
Q214 2SD2412K (RS)
(DOA)
DIGITAL OUT (A)
D
(DB) (DB)
(DOA)
(DA)
(DA)
22
E
1
2
3
4
5
6
7
8
CMX-3000, CU-V163
E
JA207
JACB ASSY (KUCXJ: DWX2214) (WYXJ: RLBXJ: DWX2200)
A
M JA701
TP2 TP1 2SD2114 K (VW)
(A) (A)
Q206
Q205 2SD2114 K (VW)
(A)
(A)
AUDIO OUT (B)
AUDIO OUT TP4 TP3
Q208 2SD2114 K (VW) Q207 2SD2114 K (VW)
TP6
B
Q201 DTA124EUA
Q202 DTC124EUA TP6 TP5 2SD2114 K (VW)
(B) (B)
Q210 Q209 2SD2114 K (VW)
(B)
(B)
AUDIO OUT (A)
TP7
TP8
Q212 2SD2114 K (VW) Q211 2SD2114 K (VW)
C
Q203 DTA124EUA Q204 DTC124EUA
CONTROL (B)
CONTROL (A)
SIGNAL ROUTE
(A) (B) (DA) (DB) (DOA) (DOB)
: PB A AUDIO SIGNAL : PB B AUDIO SIGNAL : DIGITAL DATA A SIGNAL : DIGITAL DATA B SIGNAL : DIGITAL OUT A SIGNAL : DIGITAL OUT B SIGNAL
D
5
6
7
E
8
23
1
2
3
4
CMX-3000, CU-V163 3.7 PWRB, REGB and ACIN ASSYS
F
A
PWRB ASSY (KUCXJ: DWR1345) (WYXJ: DWR1345) (RLBXJ: DWR1348)
(5A)
KUCXJ type
G
ACIN ASSY (DWR1349)
F
PWRB ASSY (DWR1345)
(4A)
(800mA)
CN102
CN103
AN101 B
AC CORD: ADG7022AC120V 60Hz
RLBXJ type
G
ACIN ASSY (DWR1346)
F
PWRB ASSY (DWR1348)
(800mA)
CN102
CN103
(1.5A)
AN101 C
AC CORD: ADG1154AC110-120V/ 220-240V 50/ 60Hz
WYXJ type
G
ACIN ASSY (DWR1346)
F
PWRB ASSY (DWR1345)
CN102
CN103
D
AN101
AC CORD: ADG1154AC220-240V 50/ 60Hz
24
F G
1
2
3
4
5
6
7
8
CMX-3000, CU-V163
A
CN106
J151
B
H
CN104
REGB ASSY (KUCXJ: DWR1357) (WYXJ, RLBXJ: DWR1347)
CN105
A CN1218
C
(315mA) (1.5A)
E
CN202
D
5
6
7
H
8
25
1
2
3
4
CMX-3000, CU-V163 3.8 CNTA and PHTA ASSYS
M
A
CN702
CN303
Q369 Q361 Q372 Q373 Q368
2SC4081 (R/S) 2SC4081 (R/S) 2SC4081 (R/S) 2SC4081 (R/S) 2SC4081 (R/S)
B
Q370 Q371 Q362 Q363 Q364
2SC4081 (R/S) 2SC4081 (R/S) 2SC4081 (R/S) 2SC4081 (R/S) 2SC4081 (R/S)
Q365 2SC4081 (R/S) Q366 2SC4081 (R/S) Q367 2SC4081 (R/S)
C
D
SWITCHES S301 : 1 S302 : ¡ S303 : 4 S304 : ¢ S305 : TIME MODE/ AUTO CUE S306 : CD TEXT/ WAVE S307 : PITCH BEND [ + ] S308 : PITCH BEND [ - ] S311 : MASTER TEMPO S312 : TEMPO RANGE S313 : 0 (EJECT) S341 : 6 S342 : CUE S343 : IN/REALTIME CUE S344 : OUT/ OUT ADJ S345 : JOG MODE S346 : EXIT/RELOOP S347 : EMERGENCY LOOP
26
I
1
2
3
4
5
6
7
8
CMX-3000, CU-V163
: The power supply is shown with the marked box.
A
I
CNTA ASSY (DWG1551)
J
PHTA ASSY (DWG1554)
CN301
J302
B
C
Q403 2SC4081 (R/S)
Q404 2SC4081 (R/S)
Q406 2SC4081 (R/S)
Q408 2SC4081 (R/S)
Q409 2SC4081 (R/S)
Q410 2SC4081 (R/S)
D
5
6
7
I J
8
27
1
2
3
4
CMX-3000, CU-V163 3.9 CNTB and PHTB ASSYS M
A
CN704
CN503
M
CN703
CN504
Q569 Q561 Q572 Q573 Q568
2SC4081 (R/S) 2SC4081 (R/S) 2SC4081 (R/S) 2SC4081 (R/S) 2SC4081 (R/S)
B
Q570 Q571 Q562 Q563 Q564 2SC4081 (R/S) 2SC4081 (R/S) 2SC4081 (R/S) 2SC4081 (R/S) 2SC4081 (R/S)
Q565 2SC4081 (R/S) Q566 2SC4081 (R/S) Q567 2SC4081 (R/S)
C
SWITCHES S501 : 1 S502 : ¡ S503 : 4 S504 : ¢ S505 : TIME MODE/ AUTO CUE S506 : CD TEXT/ WAVE S507 : PITCH BEND [ + ] S508 : PITCH BEND [ - ] S511 : MASTER TEMPO S512 : TEMPO RANGE S513 : 0 (EJECT) S514 : BPM S SYNC S515 : RELAY PLAY S521 : HOT CUE 1 - B S522 : HOT CUE 2 - B S523 : HOT CUE 3 - B S524 : HOT CUE REC - B S525 : AUTO - B S526 : TAB - B S531 : HOT CUE 1 - A S532 : HOT CUE 2 - A S533 : HOT CUE 3 - A S534 : HOT CUE REC - A S535 : AUTO - A S536 : TAB S541 : 6 S542 : CUE S543 : IN/ REALTIME CUE S544 : OUT/ OUT ADJ S545 : JOG MODE S546 : EXIT/ RELOOP S547 : EMERGENCY LOOP
D
28
K
1
2
3
4
Q601 2SC4081 (R/S)
K
Q602 2SC4081 (R/S)
5
5
Q603 2SC4081 (R/S)
CNTB ASSY (DWG1552)
Q604 2SC4081 (R/S)
Q606 2SC4081 (R/S)
Q608 2SC4081 (R/S)
: The power supply is shown with the marked box.
6 C B
6
Q609 2SC4081 (R/S)
Q610 2SC4081 (R/S)
Q611 2SC4081 (R/S)
Q612 2SC4081 (R/S)
Q613 2SC4081 (R/S)
7
7
Q614 2SC4081 (R/S)
CN501 J502
Q615 2SC4081 (R/S)
L
Q616 2SC4081 (R/S)
PHTB ASSY (DWG1555)
CMX-3000, CU-V163
K L
Q617 2SC4081 (R/S)
8
8
Q618 2SC4081 (R/S)
29
D
A
1
2
3
4
CMX-3000, CU-V163 3.10 CNNB ASSY
: The power supply is shown with the marked box.
A
M
CN704
CNNB ASSY (DWG1553)
K
CN703
B
K
CN702
C D
30
M
1
I
CN303
CN503
CN504
2
3
4
CMX-3000, CU-V163
Waveforms
A 3/3 MAIN ASSY
Mode: Focus IN Mode: RF (Play Mode x1) Mode: AGC RF (PLAY MODE x2)
1 2
IC1010- 16pin (FE) IC1003- 16pin (FE) V: 0.5V/div. H: 5mS/div. IC1010- 14pin (TE) IC1003- 14pin (TE) V: 1V/div. H: 5mS/div.
3
IC1010- 28pin (RFO) IC1003- 28pin (RFO) V: 500mV/div. H: 500nS/div.
4
IC1010- 25pin (RFGO) IC1003- 25pin (RFGO V: 500mV/div. H: 200nS/div.
1
3
4
2
Mode: Tracking Open
Mode: RF (Play Mode x2)
Mode: 1 Track = 16 Track Serch
2
IC1010- 14pin (TE) IC1003- 14pin (TE) V: 1V/div. H: 2mS/div.
3
IC1010- 28pin (RFO) IC1003- 28pin (RFO) V: 500mV/div. H: 200nS/div.
2 5
IC1010- 14pin (TE) IC1003- 14pin (TE) V: 1V/div. H: 0.2S/div. IC1011- 6pin (SL+) IC1004- 6pin (SL+) V: 2V/div. H: 0.2S/div. IC1011- 7pin (SL-) IC1004- 7pin (SL-) V: 2V/div. H: 0.2S/div.
2
3
6
2
Mode: 1 Track Jump Mode: AGC RF (Play Mode x1)
2
IC1010- 14pin (TE) IC1003- 14pin (TE) V: 0.5V/div. H: 2mS/div.
4
IC1010- 25pin (RFGO) IC1003- 25pin (RFGO) V: 500mV/div. H: 500nS/div.
5 6
2
4
31
CMX-3000, CU-V163
Voltage (1/3)
A 1/3 MAIN ASSY
IC1200 (DYW1701)
Pin No. Voltage (V)
IC1022 (M51957BFP)
Pin No. Voltage (V)
IC1204 (HD6417709AF100B)
Pin No. Voltage (V) Pin No. Voltage (V) Pin No. Voltage (V)
IC1408 (K4S281632)
Pin No. Voltage (V)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0.7 0.7 0 to 3.2 0.7 0.7 3.1 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 3.2 0 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 3.1 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 3.1 0 to 3.2
1 2 3 4 5 6 7 8
0 0 0 0 1.3 3.2 3.2 0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
3.2 0 1.8 1.6 0 0 0 0 0 3.3 3.2 3.3 0 to 3.3 0 0 0 3.3 3.3 0 0 3.3 0 0 0 0 0 0 0 1.8 0 0 0 0 0 to 3.3 3.2 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 0 to 3.3 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 0 to 3.3 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 0 to 3.3 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 0 1.8 0 to 3.3 0 0 to 3.3 3.3 0 to 3.3 3.2 0 to 3.3 0 to 3.3 0 to 3.3
91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180
3.2 3.2 0 to 3.3 3.2 0 3.3 3.3 0 to 3.3 0 to 3.3 0 to 3.3 3.2 3.2 3.2 3.2 3.2 0 to 3.3 0 to 3.3 0 to 3.3 0 0 3.2 0 0 0 to 3.3 0 to 3.3 3.2 3.2 0 0 3.3 3.2 3.2 3.2 3.2 3.2 3.1 3 3.2 2.8 0 0 0 3.2 1.8 3.2 3.0 3.0 3.0 3.0 3.1 0 3.0 0 0 1.8 0.7 0 0 0.7 1.8 1.9 0 0 1.8 1.6 1.1 3.2 3.2 3.2 0 to 3.2 0 0 to 3.2 3.2 0 3.2 3.2 0 to 3.2 0 to 3.2 0 0 3.2 3.2 0 0 to 3.2 1.8 3.0 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2
181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208
0 0 to 3.2 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 3.2 3.1 0 3.1 0 0 3.0 3.0 3.2 3.2 3.1 0 3.2 0.7 0.7 0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
3.2 0 to 3.3 3.2 0 to 3.3 0 to 3.3 0 0 to 3.3 0 to 3.3 3.2 0 to 3.3 0 to 3.3 0 0 to 3.3 3.2 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 3.2 0 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 to 3.3 0 3.2 0 to 3.3 0 to 3.3 0.7 0 0 to 3.3 3.2 0 to 3.3 0 to 3.3 0 0 to 3.3 0 to 3.3 3.2 0.7 0 to 3.3 0 0 to 3.3 0
32
CMX-3000, CU-V163
Voltage (2/3)
A 2/3 MAIN ASSY
IC1402 (XCA56367PV150)
Pin No. Voltage (V) Pin No. Voltage (V)
IC1409 (XC2S30-5TQ144C)
Pin No. Voltage (V) Pin No. Voltage (V)
IC1414 (BA7042)
Pin No. Voltage (V)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
1.1 0.7 0.6 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 3.2 0 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 0 to 3.2 0 to 3.2 0 to 3.2 1.8 0 3.3 0 to 3.2 0 to 3.2 0 to 3.2 0 3.2 0 0 0.7 0 3.2 3.2 0.8 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 3.2 0 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 3.2 1.8 0.9 0 0 to 3.2 3.2 0 to 3.2 0.9 0.7 3.2 0 to 3.2 0 0 to 3.4 1.8 0 0 to 3.2 0 to 3.2 0.7 0 3.2 3.1 3.2 0 0.7 0.7 0.7 0.7 0 0.7 0 3.2 0 0 0 0 0 3.2 0 0 0 0 0 3.2 0 0 0 0
91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144
1.8 0 0 0 3.2 0 0 0 0 0 0 0 3.2 0 0 0 0 0 0 0 3.2 0 0 0.6 0.6 0 0 0.6 0.7 0.7 0 0 0 0 0 0 0 0 3.2 0 0 0 0 2.6 0 0 0 1 to 3.2 0 0 0 0 0 0.6
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
3.2 2.4 3.1 0.4 to 2.1 0 to 3.1 0 to 3.1 0 to 3.1 0 0 0.4 to 2.9 0 to 3.1 0 to 3.1 0 to 3.1 2.5 0 to 3.1 0.7 0.6 0.6 0.6 0.6 3.2 0.6 0 to 4.9 2.5 0.6 0.6 0 0 to 4.9 0 to 4.9 11 to 3.8 0 to 4.9 2.4 0.6 0.6 3.2 0.6 3.2 0 0 0 to 3.0 0 to 3.2 0 0 to 3.2 0 to 3.2 0 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 3.2 0 to 3.2 2.5 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 0 0 to 3.0 0 0 to 3.0 0 to 3.1 2.9 2.9 3.2 3.2 3.2 3.2 0 0 to 3.1 0 to 3.1 0 to 3.1 0.6 0 to 3.1 0 to 3.1 0 to 3.1 0 2.5 0.6 0 0 3.2 0 0.7 to 2.6 0 0.6
91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144
0 2.5 0 3.2 0 0 to 3.2 2.5 0 0 to 3.2 3.2 0 3.2 0 to 3.2 0.6 0.6 0 3.2 3.2 2.5 0 2.5 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 0 to 3.2 0 to 3.2 0 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0 to 3.2 0.6 3.2 0 0.7 0.7 0 to 3.2 0 to 3.2 0 to 4.9 0.7 0 0 0 to 4.9 0 to 4.9 0 to 4.9 0 to 4.9 1 to 3.8 3.2 2.4 0 3.2
1 2 3 4 5 6 7 8
0 2.3 0 0 2.5 to 4.5 5.0 2.6 2.6
33
CMX-3000, CU-V163
Voltage (3/3)
A 3/3 MAIN ASSY
IC1005 (TC9495F)
Pin No. Voltage (V) Pin No. Voltage (V)
E
IC201 (PE8001)
Pin No. Voltage (V)
JACB ASSY
IC211 (NJM2360M)
Pin No. Voltage (V)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
4.4 0 5.0 0 0 to 4.9 0 0.3 to 4.4 0 to 4.9 0 0 0 5.0 0 to 4.2 5.0 0 0 to 4.9 0 to 4.9 0 to 4.9 0.3 to 4.2 0 to 4.7 0 to 4.9 0 to 4.5 4.9 0 4.2 2.1 0 to 4.9 5.0 0 4.2 2.1 2.0 2.1 2.1 1.3 0 2.1 1.6 to 2.6 5.0 3.0 3.1 2.5 to 2.9 2.5 to 2.9 2.5 2.1 1.4 to 2.9 0 to 4.1 0.7 to 2.2 1.4 to 3.4 2.1 0.4 to 2.1 2.1 0.4 to 2.1 2.1 0 to 4.2 4.2 2.1 0 to 5.0 5.0 5.0 0 5.0 0 5.0 0 0 0 to 5.0 4.9 4.9 4.9 0 0 0 0 5.0 5.0 0 1.0 to 3.0 0.5 to 4.5 5.0 0 0.4 0 0 0.4 0 4.8 4.8 4.8 0 to 5.0
91 92 93 94 95 96 97 98 99 100
0 to 5.0 0 to 5.0 0 to 5.0 5.0 0 5.0 0 to 5.0 4.7 4.7 5.0
IC1010 (TA2153FN)
Pin No. Voltage (V)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
4.9 1.8 2.1 2.1 2.1 2.0 2.1 0 4.3 0 2.1 4.1 2.1 2.1 1.2 2.1 2.1 0.0 2.1 1.1 1.8 1.1 0.5 2.0 2.1 0 2.2 1.0 to 2.1 0 2.1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
0 to 3.1 0 to 3.1 0 to 3.1 0.3 to 4.4 0.5 to 2.7 0.8 to 4.8 0 5.0 5.0 0 0 to 2.5 0 2.5 0 5.0 2.2 0.7 0 0 5.0 3.0 0 0 0 0 to 4.9 0 0.5 3.2
1 2 3 4 5 6 7 8
7.1 0 to 5.6 -7.5 -7.9 0.5 6.9 6.9 6.9
I
IC301 (PD5764A)
Pin No. Voltage (V)
CNTA ASSY
K
IC501 (PD5764A)
Pin No. Voltage (V)
CNTB ASSY
Pin No.
Voltage (V)
Pin No.
Voltage (V)
IC1011(LA6562)
Pin No. Voltage (V)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
4.3 4.3 7.3 3.3 3.3 3.4 3.2 2.5 3.5 0 3.7 3.4 3.8 3.7 7.3 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.0 0.6 1.0 2.0 0 2.0 2.0 2.0 2.0 2.5 2.5 2.0 0 3.2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
0 0 0 0 5.0 5.0 0 0 0 0 to 5.0 0 to 5.0 0 to 5.0 0 to 5.0 0 to 5.0 0 to 5.0 0 to 5.0 0 5.0 0 to 5.0 0 to 5.0 0 0 to 4.3 0 to 5.0 5.0 0 0 0 0 0 to 5.0 0 to 5.0 0 to 5.0 0 to 5.0 5.0 5.0 5.0 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
-31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 -31 -31 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 0 to 5.0 0 to 5.0 0 to 5.0 1.3 0 to 5.0 0 to 5.0 0 0 5.0 2.5 0 to 5.0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
5.0 5.0 5.0 5.0 5.0 5.0 0 to 5.0 0 to 5.0 0 0 to 5.0 0 to 5.0 0 to 5.0 0 to 5.0 0 to 5.0 0 0 0 5.0 0 0 0 0 to 4.0 0 to 5.0 0 to 5.0 5.0 0 to 5.0 0 to 5.0 0 to 5.0 0 to 5.0 0 to 5.0 0 to 5.0 0 to 5.0 5.0 5.0 0 to 5.0 0 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
-31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 -31 -31 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 to 5.0 -31 0 to 5.0 0 to 5.0 0 to 5.0 5.0 0 to 5.0 0 to 5.0 5.0 0 5.0 2.5 0 to 5.0
34
CMX-3000, CU-V163
4. PCB CONNECTION DIAGRAM
NOTE FOR PCB DIAGRAMS :
1. Part numbers in PCB diagrams match those in the schematic diagrams. 2. A comparison between the main parts of PCB and schematic diagrams is shown below.
Symbol In PCB Diagrams Symbol In Schematic Diagrams B C E B C E Part Name
3. The parts mounted on this PCB include all necessary parts for several destinations. For further information for respective destinations, be sure to check with the schematic diagram. 4. View point of PCB diagrams.
Connector
Transistor
Capacitor
B C E B B C E D D G S G S D G S C E B C E
SIDE A
Transistor with resistor
Field effect transistor
P.C.Board
Chip Part
SIDE B
Resistor array
3-terminal regulator
35
1
2
3
4
CMX-3000, CU-V163
4.1 MAIN, FRSW, SLM1 and SLM2 ASSYS
A
B FRSW ASSY C SLM1 ASSY
SIDE A
(DNP2002-C)
To Slot Mecha (A) Loading Motor (J4)
To Slot Mecha (A) pick up Assy (CN1)
(DNP2002-C)
A CN1012
B
A
MAIN ASSY
E CN201
C
D
To Slot Mecha (A) Servo Mecha
(DNP2003-B) IC1011 IC1445 IC1447 IC1010 IC1448 IC1005 IC1428 Q1002 IC1013 IC1408 IC1406 IC1015
Q1003
IC1006 IC1409
B J161
IC1008 IC1430 IC1431 IC1415 IC1414 IC1012
IC1007
36
A B C
1
2
3
4
5
6
7
8
CMX-3000, CU-V163
A
D SLM2 ASSY
To Slot Mecha (B) Servo Mecha
(DNP2002-C)
SIDE A
To Slot Mecha (B) Loading Motor (J4)
N201
To Slot Mecha (B) pick up Assy (CN1)
B
C
D IC1440 IC1408 7 IC1200 IC1009 IC1001 IC1204 IC1208 IC1004 IC1437 IC1014 IC1017 IC1022 IC1016 IC1427 IC1444 IC1443 Q1229 IC1003 IC1450 IC1002 Q1228
F CN104
5
6
7
A D
8
37
1
2
3
4
CMX-3000, CU-V163
A
SIDE B
A MAIN ASSY A MAIN ASSY
B
C
D
38
A
1
2
3
4
5
6
7
8
CMX-3000, CU-V163
A
SIDE B
B
C
(DNP2003)
D
5
6
7
A
8
39
1
2
3
4
CMX-3000, CU-V163 4.2 PWRB, REGB and ACIN ASSYS
A
A CN1218
H REGB ASSY
(DNP2002-C)
SIDE A
B
F PWRB ASSY
IC103
IC104 IC101 IC106
C
G ACIN ASSY
D (DNP2002-C) (DNP2002-C)
ACIN
40
F G H
1
2
3
4
1
2
3
4
CMX-3000, CU-V163
E
JACB ASSY
A
M JA701
SIDE A
IC207 IC213 Q171 IC209
Q215 B
IC212
IC210
C
D
(DNP2002-C) 1 2 3
E
4
41
1
2
3
4
CMX-3000, CU-V163
E JACB ASSY
A
IC172
SIDE B
B
Q213
Q214
Q201 Q202
Q208
C
Q207
IC204
IC201
Q205 Q206
Q212 Q211
D
IC205
IC202 Q203 Q204
Q209 Q210
(DNP2002-C)
42
E
1
2
3
4
1
2
3
4
CMX-3000, CU-V163
H REGB ASSY
A
(DNP2002-C)
SIDE B
F
PWRB ASSY
B
C
D
(DNP2002-C)
1
2
3
F H
4
43
1
2
3
4
CMX-3000, CU-V163 4.3 CNTA and PHTA ASSYS
I
A
CNTA ASSY
SIDE A
B
J
PHTA ASSY
C (DNP2004-B)
M CN702
D (DNP2004-B)
SWITCHES FUNCTION S301 : 1 S302 : ¡ S303 : 4 S304 : ¢ S305 : AUTO CUE/ TIME MODE S306 : TEXT/ WAVE S307 S308 S311 S312 S313 S341 : PITCH BEND [ + ] : PITCH BEND [ - ] : MASTER TEMPO : TEMPO : 0 (EJECT) :6 S342 S343 S344 S345 S346 S347 : CUE : IN/REALTIME CUE : OUT/ OUT ADJ : JOG MODE : RELOOP/ EXIT : EMERGENCY LOOP
44
I J
1
2
3
4
1
2
3
4
CMX-3000, CU-V163
I
CNTA ASSY
A
SIDE B
J
PHTA ASSY
B
(DNP2004-B)
C
D Q369 Q361 Q372 Q373 IC304 IC303 Q368 Q370 Q371 Q362 Q406 Q363 Q364 Q365 Q366 Q367 IC301 Q403 Q404
Q408 Q409 Q410 IC305
(DNP2004-B)
1
2
3
I J
4
45
1
2
3
4
CMX-3000, CU-V163 4.4 CNTB and PHTB ASSYS
A
L
SIDE A
PH
K CNTB ASSY
(DNP2002-B)
B
C
SWITCHES FINCTION S501 : 1 S502 : ¡ S503 : 4 S504 : ¢ S505 : AUTO CUE/ TIME MODE S506 : TEXT/ WAVE S507 : PITCH BEND [ + ] S508 : PITCH BEND [ - ]
S511 S512 S513 S514 S515 S521 S522 S523
: MASTER TEMPO : TEMPO RANGE : 0 (EJECT) : BPM SYNC : RELAY PLAY : HOT CUE 1 - B : HOT CUE 2 - B : HOT CUE 3 - B
S524 S525 S526 S531 S532 S533 S534 S535
: HOT CUE REC - B : BPM AUTO - B : BPM TAP - B : HOT CUE 1 - A : HOT CUE 2 - A : HOT CUE 3 - A : HOT CUE REC - A : BPM AUTO - A
S536 S541 S542 S543 S544 S545 S546 S547
: BPM TAP - A :6 : CUE : IN/ REALTIME CUE : OUT/ OUT ADJ : JOG MODE : RELOOP/ EXIT : EMERGENCY LOOP
D
46
K
1
2
3
4
5
6
7
8
CMX-3000, CU-V163
A
L
PHTB ASSY
SIDE A
P2002-B)
B
C
IC502
(DNP2002-B)
D
5
6
7
K L
8
47
1
2
3
4
CMX-3000, CU-V163 4.5 CNTB, PHTB and CNNB ASSYS
A
M CNNB ASSY
SIDE A
L
SIDE B
B
PHTB ASSY
K CNTB ASSY
(DNP2004-B)
C
D (DNP2004-B) IC501 Q609 Q573 Q572 Q561 Q569 Q562 Q571 Q570 Q568 Q567 Q566 Q565 Q564 Q563 Q608 IC503 Q60
48
K L M
1
2
3
4
5
6
7
8
CMX-3000, CU-V163
E JA207
A
(DNP2004-B) IC701
SIDE A
I CN303
B
SIDE B
C
D Q606 Q602 Q601 Q615 Q616 Q603 Q604 Q618 Q617 Q614 Q611 Q612 Q613
5
6
7
K M
8
49
CMX-3000, CU-V163
5. PCB PARTS LIST
NOTES:
· Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. · The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. · When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%, and K=10%). 561 ........................................................ RD1/4PU 5 6 1 J 560 56 × 101 473 ........................................................ RD1/4PU 4 7 3 J 47k 47 × 103 0.5 R50 ..................................................................................... RN2H R 5 0 K 1 1R0 ..................................................................................... RS1P 1 R 0 K Ex.2 When there are 3 effective digits (such as in high precision metal film resistors). 5621 ...................................................... RN1/4PC 5 6 2 1 F 5.62k 562 × 101
· LIST OF WHOLE PCB ASSEMBLIES (FOR CMX-3000)
Part No. Mark Symbol and Description CMX-3000/ KUCXJ
DWG1556 DWM2130 DWR1345 DWR1349 DWR1357 DWS1314 DWS1315 DWS1316 DWX2214
CMX-3000/ WYXJ
DWG1556 DWM2127 DWR1345 DWR1346 DWR1347 DWS1314 DWS1315 DWS1316 DWX2200
CMX-3000/ RLBXJ
DWG1556 DWM2131 DWR1348 DWR1346 DWR1347 DWS1314 DWS1315 DWS1316 DWX2200
Remarks
NSP
MAIN ASSY POWB ASSY PWRB ASSY ACIN ASSY REGB ASSY FRSW ASSY SLM1 ASSY SLM2 ASSY JACB ASSY
*1 *2
and DWR 1347 are different in part number, they consist of the same components. *1: Although DWR1357 and DWX2200 are different in part number, they consist of the same components. 2: Although DWX2214 *
· LIST OF PCB ASSEMBLIES (FOR CU-V163)
NSP CONT ASSY CNTA ASSY CNTB ASSY CNNB ASSY PHTA ASSY PHTB ASSY DWM2129 DWG1551 DWG1552 DWG1553 DWG1554 DWG1555
· CONTRAST OF PCB ASSEMBLIES
F
PWRB ASSY
Part No. DWR1345
S105 (Voltage Selector) Not used
DWR1345 and DWR1348 are constructed the same except for the following:
Mark Symbol and Description Remarks
DWR1348
DSA1026
H ACIN ASSY
DWR1349 and DWR1346 are constructed the same except for the following:
Mark Symbol and Description DWR1349
AN101 (Power Socket) AN101 (1P AC Inlet) AKP7032 Not used
Part No. DWR1346
Not used BKP1046
Remarks
50
CMX-3000, CU-V163
· PARTS LIST FOR CMX-3000/ KUCXJ
Mark No. Description Part No. Mark No. Description Part No.
CEJQ220M25 CKSRYB102K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB104K25 CKSRYB104K25 CKSRYB104K25 CKSRYB104K25 CKSRYB104K25 CKSRYB104K25 CKSRYB104K25 CKSRYB104K25 CKSRYB104K25 CKSRYB104K25 CKSRYB153K50 CKSRYB222K50 CKSRYB224K16 CKSRYB332K50 CKSRYB333K16 CKSRYB471K50 CKSRYB473K50 CKSRYB473K50 CKSRYB562K50 VCM1010
A MAIN ASSY
SEMICONDUCTORS
IC1012, IC1013 (315 mA) IC1014 (500 mA) IC1015, IC1016 (1.5 A) IC1414, IC1415 IC1200 IC1204 IC1408 IC1004, IC1011 IC1022 IC1208 IC1444, IC1445, IC1448, IC1450 IC1406 IC1009 IC1443, IC1447 IC1003, IC1010 IC1440 IC1437 IC1427, IC1428 IC1001 IC1430, IC1431 IC1017 IC1007, IC1008 IC1006 IC1002, IC1005 IC1409 IC1402 Q 1003, Q 1229 Q 1002, Q 1228 D1202, D1203 AEK7059 AEK7060 AEK7065 BA7042 DYW1701
HD6417709AF100B K4S281632C-TC1H
C1508, C1511 C1013, C1014, C1017 C1010, C1015, C1019, C1020, C1023 C1025, C1026, C1029, C1032 C1044-C1046, C1048, C1055, C1065 C1071, C1094, C1095, C1098 C1108-C1111, C1118, C1127, C1136 C1139, C1142-C1144, C1150, C1151 C1154, C1162, C1163, C1175, C1185 C1193, C1196, C1401-C1403 C1405-C1408, C1417, C1422, C1423 C1426-C1428, C1431-C1434, C1436 C1486, C1512, C1533, C1534 C1536, C1537, C1539, C1554 C1561-C1564, C1577, C1578 C1583-C1585, C1589, C1590 C1594-C1596, C1598, C1601, C1603 C1606, C1608-C1615, C1619, C1620 C1001, C1003, C1007, C1008, C1018 C1022, C1037-C1042, C1050, C1051 C1056, C1061, C1069, C1070, C1081 C1085-C1091, C1113, C1114, C1129 C1133, C1138, C1140, C1170, C1171 C1183, C1190, C1195, C1197 C1202, C1203, C1207-C1209 C1212-C1214, C1217-C1224, C1226 C1228-C1234, C1236-C1239, C1245 C1509, C1618 C1066, C1152 C1072, C1155 C1115, C1116, C1172, C1173 C1429 C1078, C1157 C1210, C1211, C1246 C1080, C1083, C1158, C1159, C1247 C1487 C1119, C1176 VC1001, VC1002 (40P)
LA6562 M51957BFP MM1561JF NJM2100M NJM2870F18 NJM2870F25 NJM2903M TA2153FN TC74VHC02FT TC74VHC04FT TC74VHCT245AFT TC74VHCT541AFT TC7SU04FU TC7W08FU TC7WT241FU TC7WU04FU TC9495F XC2S30-5TQ144C XCA56367PV150 2SA1036K DTC114TK UDZ2.0B
COILS AND FILTERS
L1004, L1006, L1007, L1009 F1001, F1002 L1021, L1022 DTL1024 DTL1090 LCYAR68J2520
CAPACITORS
C1117, C1174, C1579, C1582, C1593 C1104, C1106, C1166, C1168, C1404 C1421, C1424, C1430, C1435 C1033, C1034 C1581, C1592 C1587, C1588, C1597, C1599 C1121, C1178 C1099, C1100, C1164, C1165 C1064, C1128, C1149, C1186 C1074, C1156, C1616, C1617 C1107, C1169 C1004, C1006, C1009, C1024 C1035, C1036, C1093, C1105, C1124 C1135, C1137, C1161, C1167, C1181 C1192, C1194, C1206, C1215, C1216 C1227, C1410, C1413, C1453, C1531 C1552 C1132, C1189 C1012, C1047, C1559, C1560 C1507, C1510 CCSRCH100D50 CCSRCH101J50 CCSRCH101J50 CCSRCH120J50 CCSRCH121J50 CCSRCH180J50 CCSRCH270J50 CCSRCH330J50 CCSRCH470J50 CCSRCH471J50 CCSRCK2R0C50 CEAT101M10 CEAT101M10 CEAT101M10 CEAT101M10 CEAT101M10 CEAT101M10 CEAT221M10 CEJQ101M6R3 CEJQ1R0M50
RESISTORS
R1202-R1204, R1221, R1223 R 1401,R 1402,R 1409,R 1413,R 1418 R 1425,R 1426,R 1584,R 1585,R 1594 R1086 R1085 R1711, R1715 R1703, R1704, R1721, R1723 R1706, R1707, R1719, R1720 R1710, R1716 R1705, R1722 R1708, R1709, R1717, R1718 Other Resistors RAB4C223J RAB4C223J RAB4C223J RN1/16SE3301D RN1/16SE4701D RS1/16S1502F RS1/16S3301F RS1/16S3902F RS1/16S4701F RS1/16S5600F RS1/16S8202F RS1/16S&&& J
OTHERS
CN1005, CN1009 FPC CONNECTOR CN1012 7P JUMPER CONNECTOR CN1004, CN1008 CONNECTOR POST CN1002, CN1006 CONNECTOR POST CN1218 5P TOP POST 16FMZ-ST 52147-0710 B2B-PH-K-S B3B-PH-K-S B5B-EH
51
CMX-3000, CU-V163
Mark No. Description Part No.
B6B-PH-K-S DSS1132 VKN1626 VSS1084
Mark No.
Description
Part No.
DTC124EUA 1SS355 EC10QS04 UDZ33B UDZS10B UDZS5.1B UDZS8.2B
CN1003, CN1007 CONNECTOR X1002 CRYSTAL RESONATOR(12MHz) CN1010 CONNECTOR X1001 CRYSTAL RESONATOR(16.9MHz)
Q 202 ,Q 204 D181, D201D204 D211 D212 D 205 ,D 207 ,D 208 ,D 210 D214 D171
B FRSW ASSY
SEMICONDUCTORS
D 161 ,D 162 D163 SLR-343MC(NPQ) SLR-343VC(NPQ)
COILS AND FILTERS
L215 L213, L214 L201, L202 L208, L212, L217L221 DTL1083 LCTA470J2520 LRCA4R7J VTL1084
SWITCHES
S161, S162 S163 ASG7013 DSH1049
CAPACITORS
C273 C274 C202, C208, C220, C268 C270, C271 C171 C275 C207, C214, C219, C226, C262 C205, C213, C217, C225 C172 C201, C261, C272 C230, C233, C237, C240 C266, C267 C248, C250 C173, C204, C206, C211, C212 C216, C218, C223, C224, C229 C231, C239, C241, C244C247 C249, C251, C269 C276 C228, C232, C234C236, C238 C242, C243 CCSRCH181J50 CCSRCH220J50 CEAT101M10 CEAT101M10 CEAT1R0M50 CEAT330M50 CEAT470M16 CEAT470M25 CEAT470M50 CEHAR330M10 CEJQNP220M16 CKCYF103Z50 CKSRYB103K50 CKSRYB104K25 CKSRYB104K25 CKSRYB104K25 CKSRYB104K25 CKSRYB473K50 CQMA152J50 CQMA152J50
CAPACITORS
C161 CKSRYB103K50
RESISTORS
Other Resistors RS1/16S&&& J
OTHERS
161 J 161 7P CABLE HOLDER JUMPER WIRE 51048-0700 D20PDY0720E
C SLM1 ASSY
SWITCHES AND RELAYS
S801, S802 DSG1017
OTHERS
CN801 CONNECTOR POST S3B-PH-K-S
D SLM2 ASSY
SWITCHES AND RELAYS
S901, S902 DSG1017
RESISTORS
R221 R171, R172 R231, R240, R250, R258 R201 R202 Other Resistors RD1/2VM222J RD1/2VM560J RN1/16SE2202D RS1/16S2202F RS1/16S4701F RS1/16S&&& J
OTHERS
CN901 CONNECTOR POST S3B-PH-K-S
E JACB ASSY
SEMICONDUCTORS
IC209 IC212 IC207 IC210 IC211 (315 mA) (500 mA) (1.5 A) (0.4 A) AEK7059 AEK7060 AEK7065 ICP-N10 NJM2360M NJM4558MD NJM78L05A PE8001A TC74ACT04F 2SB1237X 2SB1375 2SC2412K 2SD2114K DTA124EUA DTA143EUA
OTHERS
208 JA201, JA202 JA205, JA206 JA203, JA204 207 JACK 2P JACK JACK BOARD JACK/12V I/O JACK AKN7003 DKB1053 PKB1033 PKN1004 VKN1070
IC204, IC205 IC181 IC201, IC202 IC172 Q171 Q215 Q213, Q214 Q205Q212 Q 201 ,Q 203 Q182
CN201 B TO B CONNECTOR 30P VKN1627 0 SCREW PLATE VNE1948 PCB BINDER VEF1040
52
CMX-3000, CU-V163
Mark No. Description Part No. Mark No. Description Part No.
F
PWRB ASSY
IC104 IC107 IC101 IC103 IC108 (800 mA) (1.5 A) (4 A) (5 A) (315 mA) AEK7008 AEK7011 AEK7018 AEK7019 AEK7059 ICP-N38 1SR154-400 D3SBA20(B) RB060L-40 RB160L-40
SEMICONDUCTORS
H REGB ASSY
SEMICONDUCTORS
IC153 IC152 IC151 BA033T BA05T PQ15RW21
CAPACITORS
C155, C156 C154 C151C153 CEHAT101M10 CEHAT470M16 CKSRYB103K50
IC106 (1.5 A) D 103 -D 106 D102 D111D114 D107D110
RESISTORS
R152 R151 RN1/16SE2201D RN1/16SE3901D
COILS AND FILTERS
L101 VTL-004
OTHERS CAPACITORS
C103 (0.01 µF/ AC275V ) C 125 -C 127 C123 C124 C121 C122 C104C108, C110C113 C128C136 ACE7027 CEAT101M10 CEHAT221M2A CEHAT472M16 CEHAT472M25 CEHAT682M16 CKSRYB473K50 CKSRYB473K50 151 9P CABLE HOLDER J 151 JUMPER WIRE 0 REGURATOR PLATE SCREW 51048-0900 D20PDY0910E DNH2507 BBZ30P060FMC
RESISTORS
Other Resistors RS1/16S&&& J
OTHERS
CN106 CN103 CN104 CN105 0 9P JUMPER CONNECTOR SOCKET 4P 5P TOP POST 9P TOP POST SCREW PLATE 52147-0910 AKP7132 B5B-EH B9B-EH VNE1948
G ACIN ASSY
SWITCHES AND RELAYS
S101 RSA1001
CAPACITORS
C102 (0.01µF/ AC275V C101 (10000PF/AC250V) ACE7027 ACG7033
OTHERS
CN102 AN101 H101, H102 PLUG 4P POWER SOCKET FUSE CLIP AKM7055 AKP7032 AKR1004
53
CMX-3000, CU-V163
Mark No. Description Part No. Mark No. Description Part No.
SLI-343YCW(RST) TLGE68TG(NP) UDZS5.1B
I
CNTA ASSY
IC301 IC305 IC303, IC304 Q361Q373, Q403, Q404 ,Q406 Q408Q410 D301, D302, D396D399 D411, D412 D415D420 D407D410 PD5764A TC74HC14AF TC7S86F 2SC4081 2SC4081 1SS355 SLI-343URCW(RST) SLI-343YCW(RST) TLGE68TG(NP)
D623D628, D631D636 D607D610 D590
SEMICONDUCTORS
SWITCHES
S501S508, S511S515 S521S526, S531S536 S541S547 ASG7013 ASG7013 ASG7013
CAPACITORS
C651 C658 C659 C501, C511, C521, C531, C541 C596C599, C656 C652C655, C657 C683C700 CEAT101M10 CEAT1R0M50 CEAT220M50 CKSRYB102K50 CKSRYB102K50 CKSRYB103K50 CKSRYB221K50
SWITCHES
S301S308, S311S313 S341S347 ASG7013 ASG7013
CAPACITORS
C451 C458 C459 C301, C311, C396C399 C452C455, C457 C483C500 C461, C462 CEAT101M10 CEAT1R0M50 CEAT220M50 CKSRYB102K50 CKSRYB103K50 CKSRYB221K50 CKSRYB471K50
RESISTORS
R596, R597 VR501 (50k-B x2) Other Resistors RS1/16S2201F DCV1011 RS1/16S&&& J
OTHERS
CN504 CONNECTOR CN503 CONNECTOR CN501 4P JUMPER CONNECTOR V501 VACUUM FL DISPLAY X501 CERAMIC RESONATOR (4MHz) FL HOLDER 52084-0810 52084-0910 52147-0410 DEL1047 DSS1131 DNK3956
RESISTORS
R396, R397 VR301 (50k-B x2) Other Resistors RS1/16S2201F DCV1011 RS1/16S&&& J
OTHERS
CN303 CN301 V301 X301 CONNECTOR 4P JUMPER CONNECTOR VACUUM FL DISPLAY CERAMIC RESONATOR FL HOLDER 52084-1510 52147-0410 DEL1047 DSS1131 DNK3956
L
PHTB ASSY
D591, D592 GP1S94
SEMICONDUCTORS CAPACITORS
C591 CKSRYB103K50
J
PHTA ASSY
RESISTORS
GP1S94 Other Resistors RS1/16S&&& J D391, D392
SEMICONDUCTORS CAPACITORS
C391 CKSRYB103K50
OTHERS
J 502 JUMPER WIRE D20PWY0415E
RESISTORS
Other Resistors RS1/16S&&& J
M CNNB ASSY
SEMICONDUCTORS
IC701 JUMPER WIRE D20PWY0415E BA05T
OTHERS
J 302
CAPACITORS
C703 C701 C702, C704 CEAT101M10 CEAT101M16 CKSRYB103K50
K CNTB ASSY
SEMICONDUCTORS
IC501 IC502 IC503 Q561Q573, Q601Q604, Q606 Q608Q618 D501, D596D599 D611, D612, D621, D 622 D629, D 630 D601D604, D615D620 PD5764A PST994D TC74AC04F 2SC4081 2SC4081 1SS355 SLI-343URCW(RST) SLI-343URCW(RST) SLI-343YCW(RST)
OTHERS
CN704 CN703 CN702 0 0 CONNECTOR 8P CONNECTOR 9P CONNECTOR 15P I/O JACK SCREW PLATE 53095-0810 53095-0910 53095-1510 VKN1070 VNE1948
54
CMX-3000, CU-V163
6. ADJUSTMENT
6.1 ADJUSTMENT ITEMS AND LOCATION
Adjustment Points (PCB Part)
A MAIN ASSY
SIDE A
PLAYER A IC1415 VCO-TP
PLAYER B IC1414 VCO-TP
VC1001 PLAYER A
VC1002 VC1001 PLAYER B
Adjustment Items
[Electrical Part]
1 VCO Free-running Adjustment
6.2 JIGS AND MEASURING INSTRUMENTS
CH1 (X) CH2 (Y)
6.3 NECESSARY ADJUSTMENT POINTS
When
Exchange
Adjustment Points 1 = Page 56
MAIN ASSY
Screwdriver (small) Dual-trace oscilloscope (10:1 probe)
Exchange
CD MECHANISM ASSY (DA11T3CNPIO)
55
CMX-3000, CU-V163
6.4 ELECTRICAL ADJUSTMENT
1
VCO Free-running Adjustment
Objective : To optimize the VCO free-running frequency When not properly adjusted : · Master Tempo does not function normally · The output does not appear in indication and occasion when turned a Tempo adjustment into + side.
· Power ON · None disc
MAIN ASSY
VC1001 (PLAYER A) VC1002 (PLAYER B)
DC voltage 2.5±0.2V
Player
CH1 (X)
CH2 (Y)
START
MAIN ASSY Probe (10:1)
Oscilloscope
V: 50mV/div. H: 10msec/div. DC mode
IC1415 - pin 1 (PLAYER A) IC1414 - pin 1 (PLAYER B) GND
56
CMX-3000, CU-V163
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 SERVICE MODE Outline of the Service Mode
This unit prepares the test mode in the controller and player sections. 1 Confirmation mode of the controller button and display function There are following two ways in the mode confirming the controller button and display function. Mode 1: When connect the Controller section to the Player, and confirm it. Mode 2: When connect the power supply to Controller section being simple, and confirm it. Basic operation is the same with both modes, but FL does not light. 2 The mode which confirms the operation with the player being simple (Use the remote control unit.) Connect the Remote control unit (RU-V101) to a DATA IN/OUT terminal of the Player and confirms the operation. 3 State confirmation mode with the system operation Confirm the software version of each microcomputer and active state with the display.
Confirmation Mode of the Controller Button and Display Function
· Mode 1 Enter this mode when turns the power on while pressing the AUTO button of each player simultaneously. Mode 1 can confirm the state of each other button with FL other than the operation of mode 2. · Mode 2 Enter this mode when connects a screw terminal to GND and +8V from the external DC power supply to V+8B by controller section being simple. Further, it is not necessary to press buttons in the power-up.
GND +8V
GNDD CNNB Assy V+8B
Fig.1 External DC Power Supply Connection Position Note : Mode 1 and mode 2 are the same operations basically. But a power supply of FL system is not supplied in case of mode 2. Therefore cannot confirm it with FL. Explain the operation about mode 1 here. (Mode 2 is the same except that FL of mode 1 does not light.)
PLAYER A PLAYER B
G9
G10
FL Display Section and the Grid Division.
G11 G1 G2 G3 G4 G5 G6 G7 G8 G13
G12
37seg × 13grid
Fig. 2 Controller Button and FL Display Section
57
CMX-3000, CU-V163
· Confirm the FL display operation In mode 1, display the demonstration display of fixed pattern and display 1/2 light, all lighting and all lights out repeatedly. In addition, display the button name in dot matrix of Grid 1 to Grid 8 while a button is pressed. · Confirm the each button operation Corresponding two LED lights when pressed the button of each player. Relation of LED corresponding to each button is the following matrix, and vertical scale of each button and button LED corresponding to horizontal scale light it. For example, "CUE" button LED of player B and "HOT CUE 1" button LED of player A light it when pressed "EJECT" button of player B. When "BPM SYNC" and "RELAY PLAY" button were pressed, "CUE" button LED of player B and "HOT CUE (REC)" button LED of player A and "HOT CUE 3" button LED of player B light it. PLAY/PAUSE (6) Button LED of Each Player
HOT CUE 3_a Button LED HOT CUE 2_a Button LED HOT CUE 1_a Button LED HOT CUE (REC)_a Button LED HOT CUE 3_b Button LED HOT CUE 2_b Button LED HOT CUE 1_b Button LED HOT CUE (REC)_b Button LED SERCH (1) SERCH (¡) TRACK SERCH (4) TRACK SERCH (¢) CD TEXT / WAVE PITCH BEND (+) PITCH BEND (-)
CUE Button LED of Each Player
MASTER TEMPO TEMPO RANGE EJECT BPM SYNC (Player B)
IN/REALTIME CUE Button LED of Each Player
HOT CUE 1 HOT CUE 2 HOT CUE 3 HOT CUE (REC) AUTO TAP
OUT/OUT ADJ Button LED of Each Player
PLAY/PAUSE (6) CUE IN/REALTIME CUE OUT/OUT ADJ JOG MODE EXIT/RELOOP EMERGENCY LOOP
TIME MODE / AUTO CUE RELAY PLAY (Player B)
In the mode 1, display the button name to correspond in dot matrix in the FL. Button
SEARCH (1) Button SEARCH (¡) Button TRACK SEARCH (4) Button TRACK SEARCH (¢) Button TIME MODE / AUTO CUE Button CD TEXT / WAVE Button PITCH BEND (+) Button PITCH BEND (-) Button MASTER TEMPO Button TEMPO RANGE Button EJECT (0) Button BPM SYNC Button RELAY PLAY Button
FL Display
SERCH 1 SERCH ¡ TRACK 4 TRACK ¢ TIME/CUE TEXTWAVE PITCH + PITCH - M.T (Note 1) TEMPO (Note 1) EJECT BPM SYNC 2 RELAY PL 2
Button
HOT CUE 1 Button HOT CUE 2 Button HOT CUE 3 Button HOT CUE (REC) Button AUTO Button TAP Button PLAY/PAUSE (6) Button CUE Button IN/REALTIME CUE Button OUT/OUT ADJ Button JOG MODE Button EXIT/RELOOP Button EMERGENCY LOOP Button
FL Display
HOTCUE 1 HOTCUE 2 HOTCUE 3 HOT REC AUTO TAP PLAY CUE LOOP IN LOOP OUT JOG MODE RELOOP EM. LOOP
Note 1 : Reading value of the TEMPO slider (+10 to 0 to -10) displays in . 2 : Display in FL of the player B side. · Confirm the JOG operation Button LED corresponding to each JOG blinks when turned JOG. When JOG of player A side moves: RELAY PLAY button LED light or turn off the light in the state of the JOG address that read in. When JOG of player B side moves: BPM SYNC button LED light or turn off the light in the state of the JOG address that read in. · Confirm the each button LED In this unit, all button LED light fixed time at the power-up. In addition, it can confirm the lighting state by performing the "Confirm the each button operation", "Confirm the JOG operation" and "Confirm the TEMPO slider".
58
CMX-3000, CU-V163
· Confirm the TEMPO slider In the position which read-in from the TEMPO slider, MT button LED lights at + side, and MT button LED turns off the light at - side. However, there is a case that lights or turns off the light for unevenness of parts of TEMPO slider at the center tap periphery. In addition, when TEMPO button and MT button were pressed in mode 1, match with button name in dot matrix in the FL, and display reading value of TEMPO slider by a value of +10 to 0 to -10.
Confirmation Mode of Operation with the Player Being Simple
Connect the remote control unit (RU-V101) to DATA IN/OUT terminal of the Rear panel of the player section, and confirm the operation. When use the remote control unit, remove a connection cable with the control section before power-up, then connect the remote control unit.
DATA IN/OUT
REJECT PAUSE PLAY STILL/STEP MULTI-SPEED + SCAN
CLEAR 7 AUDIO 4 VIDEO 1 DISPLAY 0 FRAME A 8 SPEED 5 STOP.M 2 STILL CR TIME B
FUNC 9 OPEN 6 START 3 C-MODE SEARCH CHAPTER C
[ Rear view ] Remote control unit for service (RU-V101)
Fig. 3 Connection of the Remote Control Unit for Service · Function of the remote control unit (RU-V101) for service
Button Corresponding Digital SW OFF Digital SW ON to RU-V101 in CDJ Mode in Digital Mode ? ? STOP. M (FUNC + 5) ? TIME ? ? CHAPTER ? FRAME ? ? PLAY 3 ? REJECT 0 ? ? PAUSE 8 Track Search ? SEARCH ? SCAN ¡ ? SCAN 1 ? ? STILL / STEP E ? ? STILL / STEP e ? ? OPEN (FUNC + 9) ? SPEED (FUNC + 8) ? A (FUNC + FRAME) ? C-MODE (FUNC + 3) ? 0 + TIME ? 1 + TIME ? 2 + TIME ? 3 + TIME ? 4 + TIME ? 5 + TIME ? 6 + TIME
REJECT
PAUSE
PLAY STILL/STEP MULTI-SPEED + SCAN
CLEAR 7 AUDIO 4 VIDEO 1 DISPLAY 0 FRAME A 8 SPEED 5 STOP.M 2 STILL CR TIME B
FUNC 9 OPEN 6 START 3 C-MODE SEARCH CHAPTER C
Player Select A Time Mode Set Track Mode Set Frame Mode Set Play (Reject) (Pause) (Search) (Scan Forward) (Scan Reverse) (1 Track Search Forward) (1 Track Search Reverse) (Eject) (Speed) (X Speed) (Test / Normal Mode Change) (Servo All OFF) (Focus ON) (Spindle Kick, Tracking ON / OFF) (Tracking OFF) (Slide FWD) (Slide REV) (Search TR No. 2)
· Specification method of the player issuing the command One remote control unit is prepared for two players in this unit. It is necessary to specify the player beforehand when issues the command to each player. Specification method of player A (left side from the front): Press buttons of "1", "STOP.M" ("FUNC" and "5") in order. Specification method of player B (right side from the front): Press buttons of "2", "STOP.M" ("FUNC" and "5") in order. Command is published by the specified player till the next Player Select command is issued after this command issue.
59
CMX-3000, CU-V163
· Specification method of addressing modes in the search There are three ways of search methods of time search, track search and frame search in this unit. It is necessary to specify each mode when performs each search. · Time search (A Time mode set) Set absolute time (minute, second, frame) in the address mode. [Examples] When search for 2 minutes 34 seconds 56 frame: Press buttons of "TIME", "0", "2", "3", "4", "5", "6" and "SEARCH" in order. · Track search (Track mode set) Set track number in the address mode. [Examples] When search for track 5: Press buttons of "CHAPTER", "5" and "SEARCH" in order. · Frame search (Frame mode set) Set frame in the address mode. [Examples] When search for 1200 frame: Press buttons of "1", "2", "0", "0" and "SEARCH" in order. · Player operation command (Play) : Playback (Reject) : Stop (Pause) : Pause. Also stop the scan operation during scan, and become pause. Become the sound output pause in the CDJ mode. (Scan Forward) : Perform the scan opearation in the forward direction. Press the PAUSE button when completes the scan operation. (Scan Reverse) : Perform the scan opearation in the reverse direction. Press the PAUSE button when completes the scan operation. (1 Track Search Forward) : Perform the track search in the forward direction. (1 Track Search Reverse) : Perform the track search in the reverse direction. (Eject) : Perform the disc eject either Playback state or Stop state. (Speed) : In the CDJ mode, set the playback speed (tempo) that specified with the argument. An argument is three columns of figure and specify 0: - (minus) or 1: + (plus) with 100-place. And specify (from 0 to 16) a tempo (%) by two places of remainders. Example: It becomes the +1% setting by pressing buttons of "1", "0", "1", "SPEED" ("FUNC" and "8") in order. It becomes the -10% setting by pressing buttons of "0", "1", "0", "SPEED" ("FUNC" and "8") in order. It becomes the +16% setting by pressing buttons of "1", "1", "6", "SPEED" ("FUNC" and "8") in order.
60
CMX-3000, CU-V163
· Test operation command As for the following command, an operation becomes possible in the digital mode (digital mode switch of front panel is ON). Because there is a case to damage the player when test operation command mistakes usage, be careful. (X Speed) : In the digital mode, switch the rotation speed of the player to normal speed and double speed . Further, sound cannot output in the double speed. Example: It becomes the normal speed playback setting by pressing buttons of "1" and "A" ("FUNC" and "FRAME") in order. It becomes the double speed playback setting by pressing buttons of "2" and "A" ("FUNC" and "FRAME") in order. This command issues a command