Text preview for : Panasonic-SAPTX7P ht audio sys.pdf part of Panasonic SAPTX7P ht audio system
Back to : Panasonic-SAPTX7P ht audi | Home
ORDER NO. MD0704014CE A6
DVD Home Theater Sound System
SA-PTX7P
Colour (K).......................Black Type
Specifications
GENERAL Power Supply: Power Consumption: AC 120 V, 60 Hz 90 W FM TUNER SECTION Frequency range: 87.9-107.9 MHz (200-kHz step) 87.5-108.0 MHz (100-kHz step) Antenna terminals: AM TUNER SECTION: AM Frequency range: HDD SECTION: Internal HDD Capacity: Recording Format: 80 GB AAC/Linear PCM MP3/WMA (LAN-PC) Bit Rate (AAC): 300 W 50 W / Channel (8 ) 50 W / Channel (8 ) 100 W / Channel (4 ) 240 W 40 W / Channel (8 ) 40 W / Channel (8 ) Channel: Recording Time: AAC: Linear PCM: DIGITAL AUDIO OUTPUT: Optical Digital Output: DIGITAL AUDIO INPUT: Optical Digital Input: DISC SECTION Playable discs [8 cm (3") or 12 cm (5")]: Optical terminal (up to 48 kHz) Optical terminal (up to 96 kHz) Approx. 2460 hours (LP mode) Approx. 104 hours 128 kbps (XP)/96 kbps (SP)/ 64 kbps (LP) 2 channels (stereo) 520-1710 kHz (10-kHz step) 75 (unbalanced)
Power Consumption in Standby Mode: Power-Save Mode (Shipping Condition) Approx. 0.5 W Dimensions (W×H×D): 360×105.5×334 mm (14-3/16"×4-3/16"×13-5/32") Mass: Operating Temperature Range: Operating Humidity Range: AMPLIFIER SECTION RMS TTL Power Output: Approx. 4.7 kg (10.5 Ibs) +5°C to +40°C (+41°F to +104°F) 10% to 80% RH (no condensation)
At 1 kHz and total harmonic of 10% Front Ch: Center Ch:
At 100 Hz and total harmonic of 10% Subwoofer Ch: FTC TTL Power Output:
At 120 Hz - 20 kHz and total harmonic of 1% Front Ch: Center Ch:
At 45 Hz - 120 Hz and total harmonic of 1% Subwoofer Ch: 80 W / Channel (4)
© 2007 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.
SA-PTX7P
(1) DVD [DVD-Video, DVD-Audio] (2) DVD-RAM [DVD-VR, MP3 (*2, 5), JPEG (*4, 5)] (3) DVD-R [DVD-VR, DVD-Video, MP3 (*2, 5), JPEG (*4, 5)] (4) DVD-R DL [DVD-VR (*6), DVD-Video] (5) DVD-RW [DVD-VR, DVD-Video, MP3 (*2, 5), JPEG (*4, 5)] (6) +R/+RW (Video) (7) +R DL (Video) (8) CD, CD-R/RW [CD-DA, Video CD, SVCD (*1), MP3 (*2, 5), WMA (*3, 5), JPEG (*4, 5), HighMAT Level 2 (Audio and Image)] *1 Conforming to IEC62107 *2 MPEG-1 Layer 3, MPEG-2 Layer 3 *3 Windows Media Audio Ver.9.0 L3 Not compatible with Multiple Bit Rate (MBR) *4 Exif Ver 2.1 JPEG Baseline files Picture resolution: between 160 x 120 and 6144 x 4096 pixels (Sub sampling is 4:2:2 or 4:2:0). Extremely long and slender pictures may not be displayed. *5 The total combined maximum number of recognizable audio and picture contents and groups: 4000 audio and picture contents and 400 groups. *6 Discs recorded on DVD recorders or DVD cameras using Version 1.2 of the Video Recording Format (a unified video recording standard). Pick Up: Wavelength: CD: DVD: Laser power: CD / DVD: VIDEO SECTION Video System: Video Output: Output level: Output Connector: 1 Vp-p (75 ) Pin jack (1 system) 1 Vp-p (75 ) 0.7 Vp-p (75 ) 0.7 Vp-p (75 ) Pin jack (Y: green, PB: blue, PR: red) (1 system) HDMI 19 pin type A connector NTSC CLASS I / CLASS II 785 nm 662 nm Refer to the respective original service manuals for *1, *2.
Component Video Output (480p/480i): Y output level: PB output level: PR output level: Output Connector: HDMI AV Output:
This unit supports "HDAVI Control 2" function. Note: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. Solder: This model uses lead free solder (PbF). Mechanism: This model uses DL2S (Single tray) mechanism.
2
SA-PTX7P
CONTENTS
Page
1 Safety Precautions 1.1. GENERAL GUIDELINES 1.2. Before Repair and Adjustment 1.3. Protection Circuitry 1.4. Safety Parts Information 2 Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices 3 Precaution of Laser Diode 4 About Lead Free Solder (PbF) 4.1. Service caution based on legal restrictions 5 Handling Precautions for Traverse Unit 8 9 10 10 11 5 5 5 6 6
Page
11.6. Disassembly of Panel P.C.B., Tact-1 P.C.B. & Tact-2 P.C.B. 11.7. Dissassembly of Main P.C.B. 11.8. Disassembly of XM Module P.C.B. 11.9. Disassembly of Power P.C.B. 11.10. Replacement of Regulator IC (IC725) 11.11. Replacement of Regulator Diode (D725/D758) 11.12. Disassembly of Regulator P.C.B. 11.13. Disassembly of DVD Module P.C.B 11.14. Disassembly of Wireless Adapter P.C.B. 11.15. Disassembly of Audio P.C.B. 11.16. Replacement of Digital Amp IC (IC102) 11.17. Replacement of Regulator Transistor (Q113) 11.18. Disassembly of DVD Mechanism Unit 11.19. Disassembly of Relay P.C.B. 11.20. Disassembly of Rear Panel 11.21. Disassembly of D-Port P.C.B. 11.22. Disassembly of Digital P.C.B. 11.23. Disassembly of AC-Inlet P.C.B. 11.24. Disassembly of Hard Disk Drive (HDD) 12 Assembly and disassembly of DVD Mechanism Unit 12.1. Disassembly Procedure 13 Service Fixture and Tools 14 Service Positions 14.1. Checking & Repairing Main P.C.B. 14.2. Checking & Repairing XM Module P.C.B. 14.3. Checking & Repairing DVD Module P.C.B. 14.4. Checking & Repairing Audio P.C.B. 14.5. Checking & Repairing Regulator P.C.B. 14.6. Checking & Repairing Power P.C.B. 14.7. Checking & Repairing Panel P.C.B. 14.8. Checking & Repairing Digital P.C.B. 14.9. Checking & Repairing AC-Inlet P.C.B. 15 Measurements and Adjustments 15.1. Service Tools and Equipment 15.2. Important points in adjustment 15.3. Storing and handling of test discs 15.4. Optical adjustment 16 Abbreviations 17 Voltage and Waveform Chart 17.1. DVD Module P.C.B. 17.2. Digital P.C.B. 17.3. Tray Loading, XM Module, Panel, & Tact-2 P.C.B. 67 68 70 70 71 71 72 72 73 74 74 75 75 76 76 78 78 80 80 81 81 86 86 86 87 87 88 89 89 90 91 93 95 95 95 95 96 98 100 100 103 105
5.1. Cautions to Be Taken in Handling the Optical Pickup Unit 11 5.2. Grounding for electrostatic breakdown prevention 6 HDD (Hard Disk Drive) Handling Care 7 Accessories 8 Operation Procedures 8.1. Remote Control Key Buttons Operations 8.2. Main Unit Key Buttons Operations 8.3. Using the EZ Sync HDAVI Control 8.4. Using the XM® Satellite Radio 8.5. Using the Music Port 8.6. Using the iPod 8.7. Wireless Surround 8.8. Disc Information 9 New Features 9.1. As a Music Jukebox (Using HDD) 9.2. Easy Location of HDD Recording Contents 9.3. Network Connections (LAN) 9.4. Operating iPod with this Unit 10 Self-Diagnosis and Special Mode Setting 10.1. Service Mode Summary Table 10.2. Service Mode Table (Main Unit) 10.3. DVD Self Diagnostic Function-Error Code 10.4. Sales Demonstration Lock Function 10.5. Service Precautions 11 Assembling and Disassembling 11.1. Disassembly Flow Chart 11.2. Main Components and P.C.B. Locations 11.3. Disassembly of Top Cover Assembly 11.4. Disassembly of Top Shield 11.5. Disassembly of Front Panel 11 13 14 15 15 16 17 19 20 21 22 31 33 33 39 41 47 49 49 49 58 62 63 64 65 66 67 67 67
3
SA-PTX7P
17.4. Main P.C.B. 17.5. AC-Inlet, Power & Regulator P.C.B. 17.6. Audio (D-Amp) P.C.B. 17.7. Audio (DSP) P.C.B. 17.8. Waveform Chart 18 Illustration of IC's, Transistors and Diodes 19 Wiring Connection Diagram 20 Block Diagram 20.1. System Control 20.2. DVD (Servo) 20.3. DVD (Audio) 20.4. DVD (Video) 20.5. DVD (Interface) 20.6. AUDIO SELECTOR 20.7. AUDIO (DSP) 20.8. AUDIO DiGITAL AMP 20.9. DIGITAL 1 20.10. DIGITAL 2 20.11. POWER 21 Schematic Diagram Notes 22 Schematic Diagram 22.1. DVD Module (DV5/HDMI/FPGA/VIDEO DAC) Circuit 22.2. Digital & XM Module Circuit 22.3. Main, D-Port & Panel Circuit
106 108 109 110 112 115 117 119 119 120 121 122 123 124 125 126 127 128 129 131 133 133 141 148
23.2. Digital P.C.B. 23.3. XM, D-Port, Tact-1 & Tact -2 P.C.B. 23.4. Main P.C.B. 23.5. Panel & Wireless Adapter P.C.B. 23.6. Power P.C.B. 23.7. Audio (D-Amp/DSP) P.C.B. 23.8. AC-Inlet, Regulator, Relay & Tray Loading P.C.B. 24 Basic Troubleshooting Guide 24.1. Before Repairing 24.2. Precaution of Replacement of HDD (Hardisk) 24.3. Precaution of Repairing Digital P.C.B.
164 165 166 168 169 170 171 173 173 173 173
24.4. Troubleshooting Flowchart of HDD Unit, CD Drive Unit & Main Micron (IC1502) 25 Terminal Function of ICs 25.1. IC501 (RFKWERE006PA): IC System Control 25.2. IC800 (C0HBB0000057): IC FL Display Driver 174 175 175 176
25.3. IC1101 (C1CB00002054): IC LAN (Ethermet Controller) 176 25.4. IC1200 (C1DB00001549): IC Link/Transaction Controller 177 25.5. IC1502 (C2GBC0000300): IC Microcomputer 25.6. IC1800 (MN677382FV): IC Sub Microprocessor 25.7. IC3201 (C1AB00002259): IC Video Encoder 26 Exploded Views 26.1. Cabinet Parts Location 26.2. Packaging 27 Replacement Parts List 27.1. Component Parts List 28 Schematic Diagram for printing with letter size 178 180 181 183 185 189 190 191 214
22.4. Power, Audio (DSP/D-Amp), AC-Inlet & Regulator Circuit 153 22.5. Tact-1, Tact-2, Wireless Adapter, Relay, Tray Loading & Optical Pickup Unit Circuit 23 Printed Circuit Board 23.1. DVD Module P.C.B. 161 163 163
4
SA-PTX7P
1 Safety Precautions
1.1. GENERAL GUIDELINES
1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed. 3. After servicing, carry out the following leakage current checks to prevent the customer from being exposed to shock hazards.
1.1.1.
LEAKAGE CURRENT COLD CHECK
1. Unplug the AC cord and connect a jumper between the two prongs on the plug. 2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the chassis, the reading should be between 1M and 5.2M. When the exposed metal does not have a return path to the chassis, the reading must be
1.1.2.
LEAKAGE CURRENT HOT CHECK
1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check. 2. Connect a 1.5k, 10 watts resistor, in parallel with a 0.15µF capacitors, between each exposed metallic part on the set and a good earth ground such as a water pipe, as shown in Figure 1. 3. Use an AC voltmeter, with 1000 ohms/volt or more sensitivity, to measure the potential across the resistor. 4. Check each exposed metallic part, and measure the voltage at each point. 5. Reverse the AC plug in the AC outlet and repeat each of the above measurements. 6. The potential at any point should not exceed 0.75 volts RMS. A leakage current tester (Simpson Model 229 or equivalent) may be used to make the hot checks, leakage current must not exceed 1/2 milliamp. In case a measurement is outside of the limits specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to the customer.
Figure 1
1.2.
Before Repair and Adjustment
Disconnect AC power to discharge unit AC Capacitors as such C701, C702, C703, C704, C705, C706, C707, C748 through a 10 , 10 W resistor to ground. Caution: DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices. After repairs are completed, restore power gradually using a variac, to avoid overcurrent. Current consumption at AC 120 V, 60 Hz in NO SIGNAL mode volume minimal should be ~ 500 mA.
5
SA-PTX7P
1.2.1.
Caution for fuse replacement
1.3.
Protection Circuitry
The protection circuitry may have operated if either of the following conditions are noticed: · No sound is heard when the power is turned on. · Sound stops during a performance. The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are "shorted", or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used. If this occurs, follow the procedure outlines below: 1. Turn off the power. 2. Determine the cause of the problem and correct it. 3. Turn on the power once again after one minute. Note: When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.
1.4.
Safety Parts Information
Safety Parts List: There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams & Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer's specified parts to prevent shock, fire or other hazards. Do not modify the original design without permission of manufacturer.
Reference No. 340 PC701 PC721 TH701 TH721 L701 L702 LB102 LB103 LB507 LB509 LB510 LB8701 T701 T721 T722 Z701 RY701 F701 IP701 IP702 IP703 IP722 P701 A2 C701 Table 1 Part No. RAE2025Z-S B3PBA0000402 B3PBA0000402 D4CAA5R10001 D4CAA5R10001 ELF15N035AN ELF19H015A J0JKB0000020 J0JKB0000020 J0JBC0000015 J0JBC0000015 J0JBC0000015 J0JBC0000015 ETS19AB221AG ETS35BC2HGAD G4D1A0000117 ERZV10D471CS K6B1AEA00015 K5D402AQ0002 K5H302100004 K5H2022A0011 K5H302100004 K5H7512A0010 K2AB2B000007 K2CB2CB00018 F1BAF471A013 Part Name & Description TRAVERSE UNIT PHOTO COUPLER PHOTO COUPLER THERMISTOR THERMISTOR LINE FILTER CHOKE COIL EMI BEAD CORE EMI BEAD CORE CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR TRANSFORMER TRANSFORMER SWITCHING TRANSFORMER ZENER POWER RELAY FUSE 4A FUSE PROTECTOR FUSE PROTECTOR FUSE PROTECTOR FUSE PROTECTOR JACK AC INLET AC CORD 470P Remarks [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
6
SA-PTX7P
Reference No. C702 C703 C704 C705 C706 C707 C748
Part No. F1BAF471A013 ECQU2A104MLC ECQU2A104MLC F1BAF1020020 F1BAF1020020 F1BAF1020020 F1BAF471A013
Part Name & Description 470P 0.1µF 0.1µF 1000P 1000P 1000P 470P
Remarks [M] [M] [M] [M] [M] [M] [M]
7
SA-PTX7P
2 Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage caused by electro static discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test. 2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly. 3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static (ESD protected)" can generate electrical charge sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material). 7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. Caution: Be sure no power is applied to the chassis or circuit, and observe all other safety precautions. 8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device).
8
SA-PTX7P
3 Precaution of Laser Diode
CAUTION: This unit utilizes a Class I (CD) / Class II (DVD) laser. Invisible laser radiation is emitted from the optical pickup lens. Wavelength: 662nm (DVD) / 785nm (CD). Maximum output radiation power from pickup: 100µW/VDE When the unit is turned on: 1. Do not look directly into the pick up lens. 2. Do not use optical instruments to look at the pick up lens. 3. Do not adjust the preset variable resistor on the pickup lens. 4. Do not disassemble the optical pick up unit. 5. If the optical pick up is replaced, use the manufacturer's specified replacement pick up only. 6. Use of control or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
9
SA-PTX7P
4 About Lead Free Solder (PbF)
4.1.
4.1.1.
Service caution based on legal restrictions
General description about Lead Free Solder (PbF)
The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin (Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86°F) more than that of the normal solder. Definition of PCB Lead Free Solder being used
The letter of "PbF" is printed either foil side or components side on the PCB using the lead free solder. (See right figure)
Service caution for repair work using Lead Free Solder (PbF) · The lead free solder has to be used when repairing the equipment for which the lead free solder is used. (Definition: The letter of "PbF" is printed on the PCB using the lead free solder.) · To put lead free solder, it should be well molten and mixed with the original lead free solder. · Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC. · Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt the lead free solder. · Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30 degrees C (662±86°F). Recommended Lead Free Solder (Service Parts Route.) · The following 3 types of lead free solder are available through the service parts route. RFKZ03D01K-----------(0.3mm 100g Reel) RFKZ06D01K-----------(0.6mm 100g Reel) RFKZ10D01K-----------(1.0mm 100g Reel) Note * Ingredient: tin (Sn), 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%
10
SA-PTX7P
5 Handling Precautions for Traverse Unit
The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode.
5.1.
Cautions to Be Taken in Handling the Optical Pickup Unit
The laser diode in the optical pickup unit may be damaged due to electrostatic discharge generating from clothes or human body. Special care must be taken avoid caution to electrostatic discharge damage when servicing the laser diode. 1. Do not give a considerable shock to the optical pickup unit as it has an extremely high-precise structure. 2. To prevent the laser diode from the electrostatic discharge damage, the flexible cable of the optical pickup unit removed should be short-circuited with a short pin or a clip. 3. The flexible cable may be cut off if an excessive force is applied to it. Use caution when handling the flexible cable. 4. The antistatic FPC is connected to the new optical pickup unit. After replacing the optical pickup unit and connecting the flexible cable, cut off the antistatic FPC.
5.2.
Grounding for electrostatic breakdown prevention
Some devices such as the DVD player use the optical pickup (laser diode) and the optical pickup will be damaged by static electricity in the working environment. Proceed servicing works under the working environment where grounding works is completed.
5.2.1. 5.2.2.
Worktable grounding Human body grounding
1. Put a conductive material (sheet) or iron sheet on the area where the optical pickup is placed, and ground the sheet.
1. Use the anti-static wrist strap to discharge the static electricity form your body.
11
SA-PTX7P
12
SA-PTX7P
6 HDD (Hard Disk Drive) Handling Care
The HDD is a high precision recording instrument and because of its long recording capability and high speed operation it is a very special device that is easily susceptible to damage.
The HDD is a device that is not built to withstand vibration/shock or dust
Depending on the setup environment and handling of the HDD some content may become damaged and play and recording may no longer be possible. Especially during operation, do not subject the unit to any vibration, shock, or remove the AC power plug from the household AC outlet. In the event of a power failure during recording or play, the content may be damaged.
Back up the HDD periodically
As a precaution for HDD failure, we recommend making a backup of the HDD periodically. However, in some cases where the HDD is heavily damaged, backups may not be restored.
Immediately request service as soon as you feel there may be a problem with the HDD
If there is an irregularity within the HDD, repetitive strange sounds or distortion ("broken up" audio) may result. Using the HDD in this condition may worsen the problem and in the worst case the HDD may no longer become usable. As soon as you notice this type of problem, request service. Recorded content (data) on an HDD that has become unusable is unrecoverable.
Setup precautions
Do not place in an enclosed area where the rear cooling fan is covered up. Place the unit on a surface that is flat and not subject to vibration or impact. Do not place on anything that generates heat like a video cassette recorder, etc. Do not place in an area often subject to temperature changes. Place in an area where condensation does not occur. Condensation is a phenomenon where moisture forms on a cold surface when there is an extreme change in temperature. Condensation may cause internal damage to the unit. Conditions where condensation may occur When there is an extreme change in temperature (moving from a very hot location to a very cold location, or vice versa, or when subjected to an air conditioner or when cooled air directly impacts the unit.) When the HDD (warms during operation) is subjected to cold air, condensation may form on the inside of the HDD and may cause damage to the HDD heads, etc. When there is high humidity or a lot of steam in the room. During the rainy season. In the above situation, wi thout turning t he un it on , let the unit adjust to the room temperature and wait 2 3 hours until condensation is gone.
While operating
Do not move the unit or subject to vibration or impact. (The HDD may become damaged.) Do not remove the AC power plug from the household AC outlet, or flip the power breaker switch. While the unit is on, the HDD is rotating at high speed. Sound or movement due to rotation is normal.
When moving the unit
1. Remove the CD. 2. Turn the unit off. 3. After "GOOD-BYE" is finished displaying, remove the plug from the wall within 2 minutes, or wait until conversion and analysis is complete to remove the AC power supply cord from the household AC outlet. 4. Once the HDD is no longer rotating and has come to a complete stop (after waiting about 2 minutes), move the unit carefully so as to avoid any vibration or shock. (After the power has been turned off, the HDD will briefly continue to rotate due to inertia.) After the power to the unit has been turned off, (unit enters "Standby Mode"), if there are recorded tracks that have not yet been converted or analyzed, the HDD will begin conversion and analysis of these recorded tracks after about 2 minutes. During conversion/analysis: Do not remove the AC power supply cord. If you are using an extension cord and/or power strip with a power switch, do not switch the power to off.
Cigarette smoke,etc. causes malfunction or breakdown
The unit may breakdown if cigarette smoke or bug spray/ vapor, etc. gets inside the unit.
Indemnity concerning recorded content
Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content (data), and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit (including any other non-HDD related component).
A warning about data management:
This unit records the history of y our operations (user information), and this history includes data such as track data recorded, user playlist information, and the various settings you made on this unit. Depending on where you place this unit, your personal information could be compromised and used by a third party. Use caution and discretion when considering where to use this unit. Also note that if this unit is sent for repair, user information may be checked as well. To prevent compromising your personal information, please delete or change all personal user information before sending in for repair.
Cautions about disposal or transferring ownership of this unit
Before disposing or transferring ownership of this unit, delete all recorded data and user playlist information ( page 94 of operating instruction, Delete All Tracks in the Music Collection). Furthermore, change any settings as necessary. In the event that user information is changed, lost, misused, compromised, or any damage or loss occurs as a result, Panasonic will not accept any responsibility. Please be aware of this before using this unit.
13
SA-PTX7P
7 Accessories
AC cord
Remote control
Speaker cable (4M)
AM loop antenna
Speaker cord (4M/White)
FM antenna
Speaker cord (4M/Red)
Video Cable
iPod dock
14
SA-PTX7P
8 Operation Procedures
8.1. Remote Control Key Buttons Operations
1 2 3 1 16 4 5 6 7 17 8 9 18 10 11 4 19 5 12 13
2 3
6
14 15 16 17 18
7
20 21
Turn the unit on (OI page 14) Select the HDD drive (OI page 45) Select the DVD/CD drive Select channels and title numbers, etc./Enter numbers Cancel items Start XM direct tuning (OI page 65) Basic operations for playback (OI page 45, 50, 52) Show a disc menu or playlist (OI page 36, 51) Show a disc top menu or program list (OI page 50, 51) Show sub menu Start recording to HDD (OI page 34) Select speaker channels (OI page 82) Select play mode (OI page 54, 57) Change radio reception mode (OI page 62) Switch information on the main unit's display When the selector is set to "DVD/CD", elapsed time, track number information, etc. can be switched depending on what is being played. When the selector is set to "XM" (OI page 66) Show Setup menu (OI page 14, 91) Select the sound effect to set (OI page 82) Television operations Select the source FM/AM/XM Select the source Music Collection DVD/CD FM AM XM OPTION MUSIC PORT AUX TV Audio
19 8
22 23 20 21
9
24
22 23
25
24 25
10 11 12 13 14 15
31 29 27
26
26 27
28
28 29
30
30 31
Adjust the volume Show FUNCTIONS window Start up and play a disc automatically/control both the home theater system and the television (OI page 76) Show Start menu (OI page 30) Selection/enter, frame-by-frame (OI page 50) Return to previous screen Music shuffle (OI page 49) Show the menu for Multiroom function (OI page 81) Register the current track to Favorites (OI page 70) Turn Dolby Virtual Speaker on/off (OI page 83) Set SLEEP timer (OI page 86) Mute the sound (OI page 86) Set the sound effect (OI page 82)
Using the cursor
Select items on menu screens and set items. Press up, down, left, or right to select an item. You can also move frame-by-frame (backward/forward). While paused, press [ ] or [ ] (left/right).
ENTER
Press [ENTER] to confirm.
15
SA-PTX7P
8.2.
Main Unit Key Buttons Operations
When opening and closing the front cover, be careful not to touch the power button, especially during recording.
1
2
3
4
5
6
7
8
9
10
VOLUME
Adjust the volume of the main unit.
11 1
12 6 7 8 9 10 11 12 13 14
13
14
2
3 4 5
) (OI page 14) POWER button (POWER Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. Standby/on indicator When the unit is connected to the AC power supply, this indicator lights up in standby mode and goes out when the unit is turned on. Disc tray Open/close disc tray (OI page 29) Select the source Music Collection DVD/CD FM AM XM OPTION MUSIC PORT AUX TV Audio
Skip, Select preset radio stations/channels Stop playback (OI page 45, 50, 52) Start playback (OI page 45, 50, 52) Start recording to HDD (OI page 34) Adjust the volume Connector for headphones (OI page 86) Connector for external device (OI page 86) Display (OI page 29) Remote control signal sensor
Rear panel terminals (OI page 12 13, 17 20)
16
SA-PTX7P
8.3.
Using the EZ Sync HDAVI Control
Preparation 1 Confirm that the HDMI connection (OI page 17) has been made. 2 Set "EZ Sync" to "On" (OI page 93, HDMI menu). 3 To complete and activate the connection correctly, turn on all EZ Sync "HDAVI Control" compatible equipment and set the television to the corresponding HDMI input mode for this unit. Whenever the connection or settings are changed, reconfirm the points above. It is recommended that you use Panasonic s HDMI cable. Recommended part number: RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), etc. Non-HDMI-compliant cables cannot be utilized.
EZ Sync "HDAVI Control"
EZ Sync "HDAVI Control" is a convenient function that offers linked operation of this unit, and a Panasonic TV (VIERA) under "HDAVI Control". You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment for operational details. EZ Sync "HDAVI Control", based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers' equipment that supports HDMI CEC cannot be guaranteed. This unit supports "HDAVI Control 2" function. The TV with "HDAVI Control 2" function enables the following operation: EZ Sync Control only with TV s remote control (for "HDAVI Control 2") (OI page 77). "HDAVI Control 2" is the newest standard (current as of February, 2007) for Panasonic s HDAVI Control compatible equipment. This standard is compatible with Panasonic's conventional HDAVI equipment. EZ Sync "HDAVI Control" compatible television HDMI IN Audio cable (not included) AUDIO OUT
L R
L
TV IN
Functions made possible with EZ Sync "HDAVI Control" are...
One-touch theater playback
You can turn on this unit and television, and start playing the disc with a single press of a button. This operation is for "DVD/CD" only. Press [ONE TOUCH PLAY]. This function also works if you press [ ] (PLAY) on this unit's remote control when this unit is in standby mode. [Note] Playback may not be immediately displayed on the television. If you miss the beginning portion of playback, press [ ] or [ ] to go back to where playback started.
Power on link
The television automatically turns on and the corresponding display appears when the following operations are performed with the television in standby mode. Audio output is also automatically switched to this unit's speakers. When you start playback on this unit. When using the GUI (display screen) to perform an action. [e.g., Start menu screen (IO page 30)]
Power off link
When the television is turned off, this unit goes into standby mode automatically. This function works only when "Music Collection", "DVD/CD" or "TV Audio" is selected as the source on this unit. When the television is turned on, this unit does not turn on automatically. [Note] Only this unit turns off when you press [ ] for shutting it down. Other connected equipment compatible with EZ Sync "HDAVI Control" stays on.
AUDIO OUT
OPTICAL OUT * Optical digital audio cable (not included) OPTICAL IN (TV) *
R
TV IN
Main unit
HDMI AV OUT HDMI cable (not included)
* Connect this when you want to output TV audio from this
unit's speakers as digital audio.
17
SA-PTX7P
Auto input switching
When you switch the television input to TV tuner mode, this unit will automatically switch to "TV Audio* ". * If you want to output digital audio, connect the optical cable (OI page 76) and select "DIGITAL IN" in "TV Audio Input" menu (OI page 94). When you start playback on this unit, the television will automatically switch to the HDMI input mode for this unit. Also from the Start menu, the input mode will be switched.
EZ Sync Control only with TV's remote control (for "HDAVI Control 2")
You can control the disc menus of this unit with the TV's remote control when using the "Music Collection", "DVD/CD", "FM", "AM" and "XM" source. When operating the TV's remote control, refer to the illustration below for operation buttons. 1 Select the operation menu by using the television menu settings. (For details, refer to the operating instructions of your television.)
ENTER/ PLAY
Speaker control
You can select whether audio is output from this unit or the television speakers by using the television menu settings. For details, refer to the operating instructions of your television. Home theater Theater speakers are active. When this unit is in standby mode, changing the television speakers to theater speakers in the television menu will automatically turn this unit on and select TV Audio* as the source. * If you want to output digital audio, connect the optical cable (OI page 76) and select "DIGITAL IN" in "TV Audio Input" menu (OI page 94). The television speakers are automatically muted. You can control the volume setting using the volume or mute button on the TV s remote control. (The volume level is displayed on this unit's FL display.) To cancel muting, you can also use this unit's remote control (OI page 22). If you turn off this unit, television speakers will be automatically activated. TV Television speakers are active. The volume of this unit is set to "0". This function works only when "DVD/CD" or "TV Audio" is selected as the source on this unit. Audio output is 2-channel audio. Audio from the CD is not output from the television speakers while recording to the HDD. However, if "Listening while Recording" is selected, audio will be output from this unit's speakers. In this case, operate the volume settings with this unit s remote control. [Note] Depending on the type of TV, the TV settings, or operations performed on the TV, Speaker Control may be automatically set to "Home theater".
RETURN
2 Select the desired item on the Start menu (OI page 30).
If you select "Disc" in "Listen" or "Watch" on the Start menu "EZ Sync" menu is displayed. Select the desired item.
"TOP MENU":
Shows a disc top menu (OI page 50) or program list (OI page 51). "MENU": Shows a disc menu (OI page 52) or playlist (OI page 51). "Control Panel": The basic operations for playback discs are available. e.g., "DVD/CD"
[Note] Depending on the menu, some button operations cannot be performed from the TV's remote control. "Control Panel" can be selected directly by using a button on the TV's remote control (e.g. [SUB MENU]). Depending on the situation, not only the EZ Sync menu, but this unit's Start menu may be displayed as well. At this point, select "Disc" by pressing [ ] (TV's remote control) and selecting "Listen" or "Watch". After that, you can operate the EZ Sync menu by operating the TV remote control. You cannot input numbers with the numbered buttons on the remote control ([0] to [10]). Use this unit's remote control to input the IP Address, etc.
18
SA-PTX7P
8.4.
Using the XM® Satellite Radio
Preparation
The XM Satellite Radio ID
Please confirm your XM Satellite Radio ID necessary for activating XM Satellite Radio as follows.
1 2 3
Press [TUNER/BAND] *1 to select "XM". Ensure the antenna is connected (OI page 19). Press [XM DIRECT TUNING] and press [0] to select "XM 0" (XM channel 0). "RADIO ID" is indicated in the display briefly, followed by an 8-digit alphanumeric ID. Note your XM Satellite Radio ID. To avoid ambiguity, the letters I, O, S and F are not used in the ID.
SELECTOR
TUNING
To exit, press [
,
] to select another channel.
Optimizing the XM signal reception
The main unit has a signal strength indicator function that allows you to optimize the XM signal reception. Radio operations are described mainly with the remote control. You can alternatively use the corresponding button on the main unit. SELECTOR] *1 [ *2 [ TUNING ] XM Satellite Radio XM Satellite Radio is the provider of satellite radio. XM offers more than 170 digital radio channels with music, talk, news, sports, comedy, traffic and weather reports. To enjoy XM Satellite Radio, subscription is required. For more information, visit XM on the Web at www.xmradio.com for U.S. customers, or www.xmradio.ca for Canada customers. How to Subscribe XM monthly service subscription sold separately. XM Connect & Play antenna, or XM Mini-Tuner and Home Dock (includes home antenna) required to receive XM service (sold separately). Channels with frequent explicit language are indicated with an XL. Channel blocking is available for XM radio receivers by calling 1-800-XMRADIO (U.S. residents) or 1-877-GET-XMSR (Canada residents). Subscriptions subject to Customer Agreement available at xmradio.com (U.S. residents) and xmradio.ca (Canada residents). Only available in the 48 contiguous United States and Canada. C 2006 XM Satellite Radio Inc. All rights reserved. All other trademarks are the property of their respective owners. To subscribe in the U.S., visit XM on the Web at www.xmradio.com or call XM s Listener Care at 1-800XMRADIO (1-800-967-2346). To subscribe in Canada, visit XM on the Web at www.xmradio.ca or call XM s Listener Care at 1-877-GETXMSR (1-877-438-9677). You should have your Radio ID ready ( right).
1 2
Press [TUNER/BAND] *1 to select "XM ". Ensure the antenna is connected (OI page 19). Press and hold [FL DISPLAY] until the XM signal status is displayed.
3
Position the antenna for the best possible satellite signal reception. The display changes depending on the signal strength. If the satellite signal is weak or not available, you can optimize for the terrestrial signal (where available).
4
Press [FL DISPLAY] to return to the previous display.
Tips for optimizing reception
To prevent interference with wireless equipment, place the antenna away from this unit, Panasonic wireless sound system SH-FX80/SH-FX85, Panasonic wireless system SHFX50/SH-FX60/SH-FX65, and other equipment that emits radio waves (such as radio equipment and microwave ovens). Place the antenna near a south-facing window with an unobstructed view of the sky for the best satellite signal reception. Refer also to the operating instructions of your XM antenna.
19
SA-PTX7P
8.5.
Using the Music Port
Using the Music Port
The Music Port allows you to connect and enjoy music from an external device (e.g. MP3 player) through this unit. Preparation To avoid distorted sound, make sure that any equalizer function of your external device is turned off.
1
Reduce the volume and connect the external device (not included). Plug type: 3.5 mm (1/8") stereo mini plug
VOLUME
External device Reduce the volume before connecting.
2
Press [ PORT".
SELECT
] to switch the selector to "MUSIC
3
Adjust the external device volume to a normal listening level, and then adjust the volume of the main unit with [ VOLUME].
20
SA-PTX7P
8.6.
Using the iPod
Recording tracks from iPod to the HDD
You can record tracks from iPod to the HDD. Press [ HDD REC]. below) and
Recording starts in the set recording mode ( playing of iPod also starts automatically. To change the recording mode 1 Press [SUB MENU] while stopped.
2 Select "Recording Mode" (OI page 33) with [ ] and make changes. In addition to the recording mode, you can also change "Auto Track Divide" (OI page 38), or "Auto Synchro Level" (OI page 38). By inserting the Universal Dock for iPod into the OPTION port and connecting iPod, you can play tracks (audio) through this unit s speakers. Additionally, you can use the remote control for this unit to perform operations such as play, stop, and record * operations on iPod. * Only audio tracks can be recorded from iPod. Preparation 1 Connect the Universal Dock for iPod and iPod as shown on OI page 78. 2 Press [ SELECT ] to switch the selector to "OPTION". To stop partway through Press [ ]. To return to the previous screen Press [RETURN]. [Note] If "No compatible equipment is connected" is displayed, then no OPTION-compatible equipment is connected to the OPTION port. [Tips] To select a track you want to record In "Playing tracks of iPod with the remote control for this unit" ( left), operate the iPod, and press [ HDD REC] after pausing at the beginning of the track you want to record. Compatible iPod Name iPod nano 2nd generation (aluminum) iPod 5th generation (video) iPod 5th generation (video) iPod nano 1st generation iPod 4th generation (color display) iPod 4th generation (color display) iPod 4th generation iPod 4th generation iPod mini
Playing tracks of iPod with the remote control for this unit
By performing the following operations on the remote control, you can play tracks from iPod. PLAY
Memory size 2GB, 4GB, 8GB 60GB, 80GB 30GB 1GB, 2GB, 4GB 40GB, 60GB 20GB, 30GB 40GB 20GB 4GB, 6GB
,
PAUSE SKIP SEARCH
[
VOLUME]
Volume adjust
Play will continue from the last track you were listening to before connecting the Universal Dock for iPod and iPod. [Note] Do not take off your iPod from this universal dock when you play your iPod back with this unit.
Compatibility depends on the software version of your iPod.
21
SA-PTX7P
8.7.
8.7.1.
Wireless Surround
Multiroom
· You can enjoy a Multiroom wireless sound system when you use the optional Panasonic wireless accessory SH-FX85. For details, please refer to the operating instructions for the optional Panasonic wireless accessory.
SH-FX85
Digital transmitter (included with SH-FX85)
About Multiroom You can enjoy the same track (audio) that is playing in the Main room (room where the main unit is placed). You can enjoy tracks (audio) from an audio source separate from the Main room. You can be in another room (a separate room) and perform basic controls such as play, stop, and skip, etc.
Multiroom usage diagram
Main room
Main unit
8.7.2.
Digital Transmitter Connection (SH-FX65T)
Multiroom connection (How to insert the digital transmitter)
[Note] Do not insert or remove the digital transmitter while the main unit is on.
1 2
Press in on the tabs marked "PUSH" to remove the lid. Insert the digital transmitter included with SH-FX85 into the card slot on the back of the u nit. Digital transmitter (Insert fully until you hear a click.)
22
SA-PTX7P
8.7.3.
Using the Multiroom
Operating this unit from another room
HDD
BAND
SELECT
VOLUME CANCEL
By operating the SH-FX85, you can control this unit and enjoy tracks from another room. For more information, refer to the operating instructions for SH-FX85. . Source Button on the SH-FX85 Play HDD, DVD/CD FM, AM, XM Stop Skip Select a channel (Preset Tuning)
STOP
MENU PLAYLIST
PAUSE
PLAY
FUNCTIONS
TOP MENU IGATOR
TOUCH PLAY ONE
RT STA
ENERGETIC MELLOW RELAXING EMOTIONAL HDDREC CH SELECT FAVORITE REG PLAYMODE FL DISPLAY SLEEP SETUP SOUND
DIRECT N AV
2ND SELECT
VS
SELECT MUTING
Note When "Main Room Source" is selected, if you operate (stop, play or skip) from another room, audio of the main unit will stop, play or skip as well.
VOLUME
OPEN/CLOSE
SELECTOR
TUNING
MUSIC PORT
Setting the IDs for a second (or third) SH-FX85 If you want to add another SH-FX85, setting an ID with that SH-FX85 is also necessary. Operate following the steps below. 1 While pressing [ ] (main unit), press [3] on this unit s remote control. "P" is displayed (for approximately 60 seconds). 2 While "P" is displayed, operate the ID setting with SHFX85. Depending on the settings of the selector for this unit and the unit in "ANOTHER ROOM", audio may not be heard. If the selector for "ANOTHER ROOM" is set to "DVD/CD" when "TV Audio" is set to "DIGITAL IN", audio will not be output. Change the settings of Multiroom. When the selector for "ANOTHER ROOM" is set to "FM" or "AM", and if the selector for "MAIN ROOM" is set to "FM" or "AM", audio in "ANOTHER ROOM" will be muted automatically and operations can no longer be performed. Change the settings of Multiroom. When "High-speed Recording" starts, audio is not output in "ANOTHER ROOM". However, if the selector for "ANOTHER ROOM" is set to "Main Room Source", then you can listen to the radio station that is currently selected in "MAIN ROOM".
Preparation 1 To display the picture turn on the television and select the appropriate video input to suit the connections to this unit. 2 Create a Multiroom connection ( OI page 80). 3 Turn on the power for SH-FX85. 4 Press [ ].
Selecting the source in another room
You can select the audio source in another room.
1
Press [2ND SELECT].
Multir oom Listen MAIN ROOM DVD/CD ANOTHER ROOM Main Room Sour ce Music Collection DVD/CD FM AM XM
ENTER RETURN
2
Press [
] to select the item and press [ENTER].
Main Room Source: The same source as in the main room is selected. Music Collection : Tracks recorded to the HDD DVD/CD: CD tracks FM: FM Radio AM: AM Radio XM: XM Radio Audio from the chosen selector will be output through the speakers in another room. If the selector for "ANOTHER ROOM" is set to "Music Collection", you need to select the playlist ( OI page 46). To return to the previous screen Press [RETURN].
8.7.4.
Function Overview
Year 2007 PT models support wireless which includes FX65/FX66, wireless subwoofer and FX85 as described below:-
23
SA-PTX7P
8.7.4.1.
FX65/FX66
· The FX65/FX66 supports one-way wireless transmission only, that is, it will only transmit wireless audio signal to the rear surround speakers. The FX65/FX66 receiver module includes a D-AMP and SMPS. The transmitter interfaces with the main unit using serial communications to communicate information such as mute command request, link detection and ID setting request. Maximum range attainable is 15 meters.
8.7.4.2.
Wireless Subwoofer (For PT1050 Only)
· The wireless subwoofer receiver module is similar in operation with FX65/FX66 in such a way that it only supports one-way wireless transmission. It also includes a D-AMP and SMPS. The difference in the wireless subwoofer receiver module is the way its hardware interprets the audio it receives from the transmitter since it is the same audio received by the FX65/FX66 receiver. Maximum range attainable is 30 meters.
8.7.4.3.
FX85
· The FX85 supports the multi-room function wherein it operates as a second room wireless receiver (up to a maximum of two). Maximum range attainable is 30 meters. It can send commands to the main unit to control functions such as Play, Stop, Forward Skip/Channel Up, Reverse Skip/Channel Down. It also has a built-in DAP pocket for stand-alone operation by inserting a DAP device (e.g. iPod) in the DAP pocket to play the device only via the device's own control buttons, FX85 cannot control the device using its own buttons. The transmitter interfaces with the main unit using serial communications to communicate information such as mute command request, link detection, ID setting request and button commands from the FX85 buttons (Play, Stop, Forward Skip/Channel Up, Reverse Skip/Channel Down). The FX85 receiver module has the following functions/terminals/buttons:
FX85 BUTTONS FX 85 Power Button Selector Button Play Button Stop Button Forward Skip/Channel Up Reverse Skip/Channel Down Volume Control FX85 FUNCTIONS D-Amp SMPS D-Port Connector ID Set Switch MPort
8.7.5.
Block Diagram
· There are two types of transmitter cards, Type A and Type B, and two types of receiver modules, Type 1 and Type 2 for the wireless configuration. The block diagrams below describe the differences of each of the types.
24
SA-PTX7P
8.7.5.1.
TX-TYPE A / RX-TYPE 1
Note:
EEPROM
EEPROM
RF
RF
- One way only - FX65/FX66 signal flow - FX65/FX66 only
MCU
ADC
DAC
CH2 IN
TX Type A
CH2 OUT
RX Type 1
· Type A transmitter uses one ADC (Analog to Digital Converter) and transmits audio through Channel 2. Type 1 receiver (Rx) uses one DAC and output audio through Channel 2. The firmware (that is downloaded to EEPROM IC) multiplexes which channel to listen to (in this case Channel 2 since type A is transmitting from channel 2 In) by setting the baseband accordingly.
8.7.5.2.
TX-TYPE B / RX-TYPE 2
EEPROM
EEPROM
MCU
Note: - FX65/FX66 SIGNAL FLOW - FX85 SIGNAL FLOW - ONE WAY AND SIMULTANEOUS - FX65/FX66 + FX85 - FX65/FX66 TRANSMITTER NOT USED, NEED TO IDSET FX65/FX66 - TX TYPE B BUT RX CHANGED FROM TYPE 2 TO TYPE 1, CH1 SIGNAL REDIRECTED TO DAC
BB
BB
RF
RF
MCU
ADC
ADC
DAC
CH2 IN
TX
CH1 IN
CH2 OUT
RX Type 2
Type B
25
MCU
BB
BB
SA-PTX7P
· Type B transmitter uses two ADC (Analog to Digital Converter) to send audio streams from Channel 1 and Channel 2 for the FX65/FX66 surround sound and FX85 second room audio, respectively. Type 2 receiver outputs audio through Channel 2. The software multiplexes which channel to listen to by setting the baseband accordingly. For example, if the receiver is configured as an FX85 receiver (Type 2), the baseband is configured to accept Channel 1 audio transmission and redirect it to Channel 2 Out. If the receiver is set as an FX65/FX66 or wireless subwoofer, the baseband is configured to accept channel 2 audio transmission and redirect it to the same Channel 2 Out.
8.7.6.
Activation
· FX65/FX66 can be activated in the main unit by using either transmitter Type A or Type B and enabling surround sound by selecting Surround Music, DPL or Super Surround (Music/Movie). · FX85 Wireless feature is enabled by default when the user uses transmitter type B.
8.7.7.
LED Indication
· For FX65/FX66, there will be two-color LED that will be used to indicate Power On and Link. If link, the two-color LED will be green, else, it will be red. For FX85, the front panel will have LED indicators for Standby,, Wireless Link, Charge, Option and Music Port. During Power On, Standby LED will be OFF. Only during power OFF will this LED be ON (Red). Wireless Link indicator will be ON (Green) when link is established between TX and RX and OFF when link is lost. Pressing the selector button will toggle from any of the selector modes Wireless, Option and Music port. Only the currently selected mode will be ON (Green), the other two will be OFF. Charge LED will be ON (Red) once iPod charging is initiated.
8.7.8.
Key Operation (FX85)
· Selector Button This button will be used to select Wireless, Option or M.Port and enabling the corresponding LED indicators for each mode. During Power On, by default, selector mode is set to Wireless when power is initially supplied to the system. But during Power On/OFF button, it will remember the last selector mode setting. · Play Button This button will send command to the main unit to play CD/DVD as well as the iPod. This function is therefore meaningful only if the second room selector is in Main Source (with the first room user in CD/DVD or iPod) and iPod. · Stop Button This button will send command to the main unit to stop CD/DVD as well as the iPod. This function is therefore meaningful only if the second room selector is in Main Source (if the first room user is in CD/DVD mode or iPod) and iPod. · Forward Skip/Channel Up This button depends on the second room source currently selected. It will be interpreted as a Forward Skip by the main unit if the second room source is in Main Source (with the first room user is in CD/DVD or iPod mode) and iPod. It will be interpreted as a Channel Up (preset channels only) if the second room source is in FM, AM, or XM. · Reverse Skip/Channel Down This button depends on the second room source currently selected. It will be interpreted as a Reverse Skip by the main unit if the second room source is in Main Source (if the first room user is in CD/DVD or mode) and iPod. It will be interpreted as a Channel Down (preset channels only) if the second room source is in FM, AM, or XM. · Volume Control Volume control will be local to the FX85 module only. Default volume (TBD) will be set every time power is first supplied to the system or during exit from stand by mode. · ID-setting Operation ID setting operation can be invoked by pressing fast-forward key in the main unit and three [3] key in the remocon. Once IDsetting is triggered, the receiver must press its ID-setting button within 60 seconds. During this period, the transmitter will be in open connect mechanism whereby any receiver can pair with the transmitter. After this period elapsed, the transmitter will revert back to using close connect code whereby only those receivers which have the same ID as the transmitter will be able to link. The user also has the option to exit the ID setting operation by pressing the same keys.
26
SA-PTX7P
· iPod Detection and Charging iPod is detected once inserted on the FX85 and battery charging automatically starts. - The iPod Charging in Standby Mode: Upon iPod insertion detection and FX85 is in Power OFF (stand by), FX85 set will enter iPod charging Standby Mode. The FX85's CHARGE LED will light up whenever the iPod is charging. FX85 will charge the battery up to five hours. After this period, FX85 will not try to recharge the iPod. After battery full condition, even if the iPod is operated such as play, FX85 will not retry to recharge the iPod (timer will start immediately once iPod is inserted). Re - charging of the battery in iPod Charging Standby Mode can be done only by removing and reinserting the iPod to the dock. - The iPod charging in Power On Mode: The iPod automatically charges its battery whenever it is connected during Power ON. The FX85's CHARGE LED will light up whenever the iPod is charging. FX85 will continue charging the iPod as long as it is inserted (no charging time limit of five hours).
8.7.9.
FX Configurations
There are four types of configurations for the FX series. This is explained by the following illustrations below: Case 1: FX65/FX66 · This is the basic configuration of FX65/FX66 whereby it is only receiving wireless surround audio signal from the main set. This uses a Type A transmitter which is only able to send audio in one direction. Audio is sent using streams AB through Ch 2.
TX
A
CH2/AB
RX
1
FX65/FX66
Case 2 A: FX65/FX66 + FX85 · In this configuration, a second receiver, an FX85, in another room is listening to another audio source from the main set. The FX85 also is able to send command to the main set such as Play, Stop, Skip, and Preset Tuner Channel Up/Down. This configuration uses Type B transmitter which is an upgrade of the Type A and can be used on Type 1 (FX65/FX66). This transmitter is able to send audio signal for second room via Ch 1 and first room via Ch 2. In this configuration, streams AB is used to transmit the audio from main unit to the first room Type 1 receiver (FX65/FX66) via Ch 2. While the second room audio is transmitted through stream CD via Ch 1.
27
SA-PTX7P
TX
B
Multi-room + Multi source
CH2/AB
RX
CH1/CD
1
FX65/FX66
RX
1
FX85
Case 3 A: Wireless Subwoofer · This configuration, Type A transmitter send signals to subwoofer and Type 1 receiver (FX65/FX66) via channel 2, which is the same audio signals sent to FX65/FX66 as well. The subwoofer only decodes the low frequency signal.
RX TX
1
A
CH2/AB
CH2/AB
RX
1
Case 3 B: FX65/FX66 + FX85 + Wireless Subwoofer (for PTX7, PT1050) · In this configuration, all audio source for the Type 1 subwoofer and Type 1 first room receiver (FX65/FX66) through streams AB via Ch 2 and Type 2 second room receiver (FX85) comes from transmitter B through streams CD via Ch 1. For this configuration, the user must perform ID setting for FX85 if it is sold as an accessory, but for bundled type, it already is paired with the transmitter.
28
SA-PTX7P
B
RX CH2/AB
RX
1
Multi-room + Multi source
CH1-CD CH2/AB
RX RX
1 1
29
SA-PTX7P
8.7.10. User Operation Flow
START
Is Tx card inserted? N
Y
Insert Tx card
POWER ON MAINSET
Is there audio source playing? N Play music
Y
Is music heard on wireless surround speaker? Y DONE
N
Is wireless link led blinking? Y A
CHECK FOR SPEAKER WIRE CONNECTIONS
TX-RX probably not paired. Do ID setting process
Press FF Key in Mainset and 3 key on remocon until "P" led displays Press ID set button on receiver
Is wireless link led blinking? N
Y
Is wireless receiver on?
Power on receiver
A Repeat ID set process
8.7.11. Baseband Settings Update from EEPROM IC
· The software will read from an external EEPROM IC to get the selected baseband IC settings. Not all baseband register settings (a total of 512 bytes) will be read from the EEPROM IC, though. Aside from getting the baseband settings from the EEPROM IC, it is also used to enable FCC testing, select the application type and entering into doctor mode (this can be enabled also by sending a command via the main unit).
8.7.12. Doctor Mode
· For normal operation but automatic frequency selection is disabled, it can enter into Doctor Mode. This feature is hidden from normal user and will be used by the service center to fix to a particular RF Channel. With doctor mode, the user can disable frequency automatic allocation and sniffer and be able to select a fix RF Channel (Channels 1, 2 or 3) by a combination or remote control keys. Refer to Section 9.4 for Wireless Doctor Mode.
30
SA-PTX7P
8.8.
8.8.1.
Disc Information
Disc Playability (Media)
Discs that can be recorded to this unit's HDD ( HDD )
CD
Music discs This unit is not compatible with HDCD. Operation and sound quality of CDs that do not conform to CD-DA specifications (copy control CDs, etc.) cannot be guaranteed. By recording in CD-DA, WMA, or MP3 format, and closing the session or finalizing*2 the CD-R/CD-RW disc when recording is complete, you can record tracks from the disc to this unit s HDD. *2 A process that allows play on other equipment.
*1See
CD / WMA *1 / MP3 *1 also "File Extension Type Support (WMA/ MP3/JPEG)" (Section 7.8.2.)
MP3
This unit can record only MP3 files on these recordable DVDs. DVD-R/RW discs need to be finalized.
DVD content cannot be recorded to this unit's HDD (except for MP3 files in recordable DVD).
Discs that can be played
Commercial discs
High quality movie and music discs DVD-V High fidelity music discs* * Some DVD-Audio discs contain DVD-Video content. To play DVD-Video content, select "Play as DVD-Video" (OI page 61, Other Menu). Music discs with video Including SVCD (Conforming to IEC62107) Music discs This unit is not compatible with HDCD. Operation and sound quality of CDs that do not conform to CD-DA specifications (copy control CDs, etc.) cannot be guaranteed.
DVD-A
VCD
CD
Recorded discs (Yes: Can be used, No: Cannot be used)
*6
DVD-VR *2 Yes
DVD-V *4
WMA No
MP3 Yes
JPEG Yes
Not necessary
Yes
Yes
No
Yes
Yes
Necessary
Yes*3 No +R No
Yes (Yes) *5 (Yes) *5
No No No Yes
No No No Yes
No No No Yes
Necessary Necessary Necessary Necessary *7
*1
It may not be possible to play the discs in all cases due to the type of discs, the condition of the recording, the recording method and how the files were created [Refer to Section 8.8.2 File Extension Type Support (WMA/MP3/JPEG)] *1 This unit can play CD-R/RW recorded with CD-DA or Video CD format. WMA MP3 JPEG This unit also plays HighMAT discs.
*3 Discs recorded on DVD recorders or DVD video cameras
using Version 1.2 of the Video Recording Format (a unified video recording standard). Discs recorded on DVD recorders or DVD video cameras using DVD-Video Format. Recorded using a format different from DVD-Video Format, therefore some functions cannot be used. A process that allows play on compatible equipment. To play a disc that is displayed as "Necessary", the disc must first be finalized on the device it was recorded on. Closing the session will also work.
*4 *5 *6
*2 Discs recorded on DVD recorders or DVD video cameras,
etc. using Version 1.1 of the Video Recording Format (a unified video recording standard).
* You
*7
can play DVD-Audio; however, still pictures may be displayed enlarged.
31
SA-PTX7P
8.8.2.
File Extension Type Support (WMA/MP3/JPEG)
Format WMA Disc CD-R/RW Extension ".WMA" ".wma" Reference Compatible compression rate: between 48 kbps and 320 kbps You cannot play WMA files that are copy protected. This unit is not compatible with Multiple Bit Rate (MBR: a file that contains the same content encoded at several different bit rates). Sampling frequency and compatible compression rate DVD-RAM, DVD-R/RW : 11.02, 12, 22.05, 24 kHz (8 160 kbps) 44.1, 48 kHz (32 320 kbps ) CD-R/RW : 8, 11.02, 12, 16, 22.05, 24 kHz (8 160 kbps) 32, 44.1, 48 kHz (32 320 kbps) JPEG files taken on a digital camera that conforms to DCF Standard Version 1.0 are displayed. Files that have been altered, edited or saved with picture editing software may not be displayed. This unit cannot display moving pictures, MOTION JPEG and other such formats, still pictures other than JPEG (e.g., TIFF) or play pictures with attached audio. Note about using a DualDisc The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so play may not be possible. Regarding DVD-Audio Some multi-channel DVD-Audio will prevent down-mixing (OI page 108, Glossary) of all or part of their contents if this is the manufacturer's intention. When playing such discs, or such parts of the disc, unless the number of connected speakers is the same as the disc s channel specification, audio will not be output properly (e.g., part of the audio is missing, multi-channel audio cannot be selected and audio is played in two channels). Refer to the disc's jacket for more information.
MP3
DVD-RAM DVD-R/RW CD-R/RW
".MP3" ".mp3"
JPEG
DVD-RAM DVD-R/RW CD-R/RW
".JPG" ".jpg" " JPEG" ".jpeg"
If groups were created away from the root like "002 group" in the illustration below, the eighth one onwards is displayed on the same vertical line in the menu screen. There may be differences in the display order on the menu screen and PC screen. This unit cannot play files recorded using packet write. This unit is not compatible with ID3 tags. Naming folders and files (Files are treated as contents and folders are treated as groups on this unit.) At the time of recording, prefix folder and file names. This should be with numbers that have an equal number of digits, and should be done in the order you want to play them (this may not work at times). DVD-RAM Discs must conform to UDF 2.0. DVD-R/RW Discs must conform to UDF bridge (UDF 1.02/ISO9660). This unit is not compatible with multi-session. The default session only is played. CD-R/RW Discs must conform to ISO9660 level 1 or 2 (except for extended formats). This unit is compatible with multi-session but if there are a lot of sessions it takes more time for play to start. Keep the number of sessions to a minimum to avoid this. e.g., MP3 root
Discs that cannot be played
Blu-ray, HD DVD, AVCHD discs, Version 1.0 of DVD-RW, DVDROM, CD-ROM, CDV, CD-G, SACD, DivX Video Discs, Photo CD, DVD-RAM that cannot be removed from their cartridges, 2.6-GB and 5.2-GB DVD-RAM, PAL discs * and "Chaoji VCD" available on the market including CVD, DVCD and SVCD that do not conform to IEC62107. * You can play DVD-Audio; however, still pictures may be displayed enlarged.
32
SA-PTX7P
9 New Features
9.1. As a Music Jukebox (Using HDD)
Recording This unit can record audio to the internal HDD from a variety of sources including commerical CDs, radio, music files (WMA/ MP3), and audio from externally connected devices (portable digital audio players, etc.). This unit can also access the Gracenote database to obtain title information for music CDs, radio broadcasts, or other analog recordings made with externally connected devices. (For recording details, see page 32 of operating instruction.) Importing from a PC You can import WMA/MP3 files from your PC to this unit. This differs from recording because the files are saved in the HDD in the same format as they are saved on your PC. (LPCM and AAC conversion is not performed.)
Various audio sources
CD Automatically connects to the Gracenote database and track title information, etc. is obtained ( below).
Music Jukebox
MP3 WMA
You can record up to 39,000§ songs in the Music Jukebox. RECORD All