Text preview for : PS100RS.pdf part of PS100RS PS100RS thru PS1010RS fast switching plastic diodes
Back to : PS100RS.pdf | Home
PS100RS THRU PS1010RS
FAST SWITCHING PLASTIC DIODES VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
FEATURES l High current capability l Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound 1.0 ampere operation at TA=55 ¢J with no thermal runaway Fast switching for high efficiency Exceeds environmental standards of MIL-S-19500/228 Low leakage
A-405
l l l l
MECHANICAL DATA Case: Molded plastic, A-405 Terminals: Plated axial leads, solderable per MIL-STD-202, Method 208 Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.008 ounce, 0.22 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
PS100RS PS101RS PS102RS PS104RS PS106RS PS108RS PS1010RS UNITS V V V A A V £g A £g A
PF ¢J /W
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) lead length at TA=55 ¢J
Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load(JECEC method)
50 35 50
100 70 100
200 140 200
400 280 400 1.0 30 1.3 5.0 500
600 420 600
800 560 800
1000 700 1000
Maximum Forward Voltage at 1.0A DC Maximum Reverse Current TJ=25 ¢J at Rated DC Blocking Voltage TJ=100 ¢J Typical Junction capacitance (Note 1) CJ Typical Thermal Resistance (Note 3) R £KJA Maximum Reverse Recovery Time(Note 2)
Operating and Storage Temperature Range TJ,TSTG
150
150
150
12 67 150 250 -55 to +150
500
500
ns ¢J
NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 2. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A 3. Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B. mounted
RATING AND CHARACTERISTIC CURVES PS100RS THRU PS1010RS
trr
+0.5A 0 -0.25
NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF 2.Rise Time = 10ns max. Source Impedance = 50 Ohms
-1.0
SET TIME BASE FOR 50 ns/cm
1cm
Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
10
INSTANTANEOUS FORWARD CURRENT, AMPERES
1
AVERAGE FORWARD RECTIFIED CURRENT AMPERES
TJ = 25 ¢J
1.6 1.4 1.2 1.0 .8 .6 .4 .2 0 0 20 40 60 80 100 120 140 160 180 MAXIMUM AVERAGE CURRENT RATING SINGLE PHASE, HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD .375"(9.5mm) LEAD LENGTHS
0.1 PULSE WIDTH = 300£gs 1% DUTY CYCLE
0.01 0.2
0.4
0.6
0.8
1.0 1.2 1.4
1.6
AMBIENT TEMPERATURE, ¢J
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
Fig. 2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
100
Fig. 3-FORWARD CURRENT DERATING CURVE
30
FORWARD SURGE CURRENT, AMPERES pk (HALF-SINE WAVE)
CAPACITANCE, pF
24
TJ = 25 ¢J
10
18
12
6
1 1 4 10 100
1
2
4
6 8 10
20
40 60 80 100
REVERSE VOLTAGE, Vdc
NUMBER OF CYCLES AT 60Hz
Fig. 4-TYPICAL JUNCTION CAPACITANCE
Fig. 5-PEAK FORWARD SURGE CURRENT