Text preview for : TEA7610.pdf part of SGS Thomson TEA7610 Low drop voltage regulator
Back to : TEA7610.pdf | Home
TEA7610
LOW-DROP VOLTAGE REGULATOR
s s s s s
VO = 10V ± 4 % (IO = 5mA) IO = 5 TO 500mA VI VO = 0.6 V (IO = 500mA) VI (surge) = ± 80V THERMAL AND SHORT-CIRCUIT PROTECTION
TO220 (Plastic Package) ORDER CODE : TEA7610SP
PIN CONNECTIONS
GND 1 = VI 2 = VO 3 = GND
DESCRIPTION TEA7610 is a low-drop regulator well suited to supplying stabilized voltage to µPs in harsh industrial environment. Special care was taken to keep : - Lowest possible output capacitor (1µF). BLOCK DIAGRAM
1
2
3
2
VI N
1
BALLAST
V OU T
START-UP BLOCK
REGULATION
CURRENT LIMIT
THERMAL PROTECTION
3
7610-02.EPS
GND
June 1992
1/4
7610-01.EPS
TEA7610
ABSOLUTE MAXIMUM RATINGS
Symbol VI VI(R) Parameter Input Voltage - Continuous - = 300 ms Reverse Input Voltage - Continuous - = 120 ms Operating Junction Temperature Storage Temperature Value 30 80 18 80 45, +150 55, +150 Unit V V V V °C °C
TJ Tstg
THERMAL DATA
Max. Max.
7610-02.TBL 7610-04.TBL 7610-03.TBL
Symbol Rth (j-c) Rth (j-a)
Parameter Junction-case Thermal Resistance Junction-ambient Thermal Resistance
Value 3 70
Unit °C/W °C/W
ELECTRICAL OPERATING CHARACTERISTICS Tj = 25oC, VI = 14.4V (unless otherwise specified) Output Capacitor = 10µF (see note)
Symbol VO VI ICC KVI KVO VI - VO SVR IOS Parameter Output Voltage (IO = 5 to 500mA) Input Supply Voltage (permanent) Current Consumption IO = 0mA IO = 150mA IO = 500mA Line Regulation (VI = 11 to 26V ; IO = 5mA) Load Regulation (IO = 5 to 500mA) Drop-out Voltage IO = 150mA IO = 500mA Supply Voltage Rejection (IO = 350mA, f = 120Hz, CO = 1µF, VI = 12 ± 5V) Short-circuit Output Current Min. 9.7 Typ. 10 1.5 10 75 5 40 0.18 0.4 60 0.7 Max. 10.3 28 2 20 100 20 80 0.6 Unit V V mA mA mA mV mV V V dB A
0.5
NOTE : Applications Hints The output capacitor has a direct influence on output voltage stability. A 10 µF capacitor will provide satisfactory results. There is no upper limit on this capacitor value. If necessary, this value can be reduced down to 1 µF ; however, in such case, it should be checked that output capacitor keeps sufficiently high capacitance and low equivalent series resistance in the whole temperature range. Such low capacitor value is not recommended either, if output current is to switch abruptly from very high to very low values (for instance, 400 mA to < 1 mA).
ELECTRICAL OPERATING CHARACTERISTICS Tj = 45oC to +125oC, VI = 14 .4V (unless otherwise specified) Output Capacitor = 10µF
Symbol VO dVO dt ICC KVI KVO VI - VO IOS IOM 2/4 Parameter Output Voltage (IO = 5 to 500mA) Output Voltage Drift Tj = 45 to +25°C Tj = + 25 to +125°C IO = 0mA IO = 150mA IO = 500mA Line Regulation (V I = 11 to 26V, IO = 5mA) Load Regulation (I O = 5 to 500mA) Drop-out Voltage IO = 150mA IO = 500mA Short-circuit Output Current Maximum Output Current Current Consumption Min. 9.6 1 1.2 Typ. 10 Max. 10.4 Unit V mV/°C mA mA mA mV mV V V A A
2.5 25 120 30 100 0.2 0.8 0.4 0.5
7610-01.TBL
TEA7610
TYPICAL DIAGRAM
IN
1
2
OUT
0.1µF
3
10µF
7610-03.EPS
GND
3/4
TEA7610
PACKAGE MECHANICAL DATA 3 PINS - PLASTIC TO220
A E C L6 H2 F2 L7 D1 D H3 Dia. F L5 L2 L3
PM-TO220.EPS
Dimensions A C D D1 E F F2 G H2 H3 L2 L3 L5 L6 L7 Dia.
Min.
Millimeters Typ.
2.4 1.2 0.35 0.8 1.15 4.95 10.05 26.3 2.6 15.1 6 3.65
5.08
Max. 4.8 1.37 2.8 1.35 0.55 1.05 1.4 5.21 10.4 10.4 27.1 3 15.8 6.6 3.85
Min.
Inches Typ.
G
0.094 0.047 0.014 0.031 0.045 0.195 0.396 1.035 0.102 0.594 0.236 0.144
0.200
Max. 0.189 0.054 0.110 0.053 0.022 0.041 0.055 0.205 0.409 0.409 1.067 0.118 0.622 0.260 0.152
16.2 26.7
0.638 1.051
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No licence is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectronics. © 1994 SGS-THOMSON Microelectronics - All Rights Reserved Purchase of I2C Components of SGS-THOMSON Microelectronics, conveys a license under the Philips I2C Patent. Rights to use these components in a I2C system, is granted provided that the system conforms to the I2C Standard Specifications as defined by Philips. SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.
4/4
TO220.TBL