Text preview for : WM-EX560 WM-EX562.pdf part of Sony WM-EX560 WM-EX562 Service Manual for Sony Stereo Cassette Player (Walkman) WM-EX560 WM-EX562.
Back to : WM-EX560 WM-EX562.pdf | Home
WM-EX560/EX562
SERVICE MANUAL
US Model
WM-EX562
AEP Model E Model
WM-EX560/EX562
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double-D symbol a are trademarks of Dolby Laboratories Licensing Corporation.
Model Name Using Similar Mechanism Tape Transport Mechanism Type
WM-EX552 MT-WMEX550-125
SPECIFICATIONS
CASSETTE PLAYER
MICROFILM
TABLE OF CONTENTS 1. 2. 3. 4. 5. 6.
6-1. 6-2. 6-3. 6-4.
SERVICING NOTES ............................................... 3 GENERAL ................................................................... 5 DISASSEMBLY ......................................................... 8 MECHANICAL ADJUSTMENTS ....................... 13 ELECTRICAL ADJUSTMENTS ......................... 13 DIAGRAMS
Block Diagram ................................................................ 14 Printed Wiring Board ...................................................... 16 Schematic Diagram ......................................................... 19 IC Pin Function Description ........................................... 25
7. 8.
EXPLODED VIEWS ................................................ 27 ELECTRICAL PARTS LIST ............................... 30
Flexible Circuit Board Repairing · Keep the temperature of the soldering iron around 270 °C during repairing. · Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). · Be careful not to apply force on the conductor when soldering or unsoldering. Notes on chip component replacement · Never reuse a disconnected chip component. · Notice that the minus side of a tantalum capacitor may be damaged by heat.
2
SECTION 1 SERVICING NOTES
This set detects the rotation of GEAR (PH) using the PH701 (photo reflector). The PH701 is mounted on the MAIN board, and therefore the GEAR cannot be detected with the MAIN board removed. As a result, the motor cannot be controlled, causing malfunction. Further, the S702 (FWD/REV switch) is also mounted on the MAIN board, and with the board removed, the mechanism position cannnot be detected and the operation is not changed over. Therefore, when the voltage check is executed with the MAIN board removed, follow the procedure provided below.
Note : Do not move the S702 swithc position when removing the MAIN board. If it is moved, the set will not be changed over to the selected mode. In this case, reconnect the MAIN board to the set and retry the work from the beginning.
1. Setting 1) Refer to "3. DISASSEMBLY", and remove the cabinet and open the MAIN board. 2) Connect the MAIN board to the M901 (motor) and PM901 (plunger) using jumper wires. 3) Short the ATS terminals. 4) Press and fixed the S701 (CASSETTE HOLDER). 5) Supply 1.5V to the battery terminals ` and ' using a stabilized power supply. 2. FF, REW Modes 1) Input a square wave to the TP35 (PHOTO IN) and TP23 (GND). (See figure below) 2) Press the S704 (STOP) for selecting STOP mode. 3) Press the S706 (FF) or S707 (REW). 3. PLAY mode 1) Input a square wave to the TP35 (PHOTO IN) and TP23 (GND). (See figure below) 2) Press the S704 (STOP) for selecting STOP mode. 3) Press the S705 (PLAY). (Each time the switch is pressed, the mode is changed over.)
-- MAIN BOARD (SIDE B) --
AF oscillator square wave 10 Hz, 3.5 dB
+
S702 FWD REV TP35 PHOTO IN IC701 TP23 (GND)
S706 (FF)
S705 (PLAY) S701 CASSETTE HOLDER
S707 (REW) connect to M901 (motor)
S704 (STOP)
RV601
PH701
battery terminal
battery terminal
ATS terminals (to S901)
connect to PM901 (plunger)
3
Lever (SW)
Rotation system Rotation system during PLAY.
lever (SW)
gear (REEL) (T side) gear (TB)
gear (NR) (REV: right side/ FWD: left side) gear (S)
gear (REEL) (S side) motor pulley
gear (TA)
side F side R senter
gear (Y)
clutch ass'y (M)
flywheel (R) ass'y flywheel (N) ass'y
Pulley (reverse)
Rotation system during FF.
Rotation system during REW.
gear (TB) gear (FR) (FF: left side) gear (REEL) (T side)
gear (FR) (REW: right side) gear (NR) motor pulley gear (NR) gear (S)
gear (REEL) (S side) motor pulley
gear (Y) clutch ass'y (M)
gear (Y) clutch ass'y (M)
flywheel (N) ass'y
flywheel (R) ass'y pulley (reverse)
flywheel (N) ass'y
flywheel (R) ass'y
pulley (reverse)
4
SECTION 2 GENERAL
This section is extracted from instruction manual.
5
6
7
SECTION 3 DISASSEMBLY
· This set can be disassembled in the order shown below.
SET
CASSETTE LID ASS'Y
CASE ASS'Y
REEL ORNAMENT
BATTERY HOLDER
MAIN BOARD, NOTE FOR INSTALLATON MOTOR (M901)
BELT
MAGNETIC HEAD (HP901)
Note: Follow the disassembly procedure in the numerical order given.
CASSETTE LID ASS'Y
1 Open the cassette lid ass'y 3 Remove the cassette lid ass'y to direction of the arrow A. 2 screw (1.4 × 2)
2 screw (IB lock)
A
8
CASE ASS'Y
3 case ass'y 1 two serrat IB locks
2 two claws 1 two serrat IB locks
REEL ORNAMENT
4 Remove the reel ornament to direction of the arrow B. 2 Push to the direction of the arrow A, remove the claw of knob (OPEN). 1 four claws A
B 3
9
BELT
1 belt
BATTERY HOLDER
2 screw
4 battery holder
3 two claws
1 Remove two solders of battery terminal.
10
MAIN BOARD
3 two screws
1 Remove four solders of motor.
1 Remove two solders of plunger solenoid.
2 flexible board (CN301)
3 screw (IB lock)
4 MAIN board
NOTE FOR INSTALLATION
· MAIN BOARD On installation MAIN board adjust the S702 and lever (SW)
S702
lever (SW)
11
MOTOR (M901)
1 two screws (IB lock)
2 Remove the motor (M901) to direction of the arrow.
MAGNETIC HEAD (HP901)
1 two pinch levers
5 two screws (M1.4 × 7.2)
2 screw (IB lock)
4 flexible board (CN301)
6 magnetic head (HP901)
3 bracket ass'y
12
SECTION 4 MECHANICAL ADJUSTMENTS
PRECAUTION 1. Clean the following parts with a denatured-alcohol-moistened swab: playback head pinch roller rubber belts capstan 2. Demagnetize the playback head with a head demagnetizer. (Do not bring the head demagnetizer close to the erase head.) 3. Do not use a magnetized screwdriver for the adjustments. 4. After the adjustments, apply suitable locking compound to the parts adjusted. 5. The adjustments should be performed with the rated power supply voltage (1.3 V) unless otherwise noted. Torque Measurement
Mode FWD FWD Back Tension REV REV Back Tension FF, REW CQ-102RC CQ-102C Torque meter Meter reading 18 30 g·cm (0.25 0.41 oz·inch) 0.7 2.0 g·cm (0.006 0.027 oz·inch) 18 30 g·cm (0.25 0.41 oz·inch) 0.7 2.0 g·cm (0.006 0.027 oz·inch) more than 35 g·cm (more than 0.49 oz·inch)
SECTION 5 ELECTRICAL ADJUSTMENTS
PRECAUTION 1. Specified voltage : 1.3 V (DC) 2. Setting BL SKIP : OFF SOUND MB/GRV : OFF AVLS : OFF aNR : OFF
Note: Refer to "Using Other Functions" on page 7.
Test tape
Type WS-48A Signal 3 kHz, 0 dB Used for Tape Speed Adjustment
Tape Speed Adjustment Procedure:
Test tape WS-48A (3 kHz, 0 dB) frequency counter 16
+
set
2 REMOTE jack
CQ-201B
1. Playback WS-48A (tape center) in the FWD state and adjust RV601 so that the frequency counter reading becomes 3000 ± 10 Hz. 2. Playback WS-48A (tape center) in the REV state. Check that the frequency counter reading is within 2.5% of the reading of step 1. Adjustment Point:
RV601
13
· Waveforms
1 IC701 #· (PHOTO IN) 500 mV/DIV, 50 ms/DIV 5 Q504 Base 200 mV/DIV, 500 µs/DIV
1.4 Vp-p
0.6 Vp-p
100 ms
980 µs
2 IC701 ! (XTB) 200 mV/DIV, 10 µs/DIV
6 Q504 Collector 200 mV/DIV, 500 µs/DIV
1 Vp-p
1.3 Vp-p
32.768 kHz
980 µs
3 IC704 !§ (XT) 200 mV/DIV, 10 µs/DIV
7 Q502-1 Collector 200 mV/DIV, 500 µs/DIV
0.7 Vp-p
1.3Vp-p
32.768 kHz
980 µs
4 IC704 @º (VCP) 500 mV/DIV, 500 µs/DIV
8 IC601 5 (OSC) 10 mV/DIV, 1 ms/DIV
1.5 Vp-p
21 mVp-p
980 µs
1.6 ms
23
· IC Block Diagrams IC301 TA2072AF
IC601
MM1279XVBE
24
6-4. IC PIN FUNCTION DESCRIPTION
· MAIN BOARD IC701 MSM6576-83GS-K (SYSTEM CONTROLLER) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Pin Name M.CTL M.DIR M.BRK RESET TEST1 TEST2 TEST3 L.DOLBY L.AVLS L.BATT L.BLSKIP MUTE CTL PM CTL PHOTO CTL XTB XT VDD VSS1 VCM VCP VSS2 VEE SET STOP1 SET STOP2 KEY IN HOLDER SW BEEP AMS IN RMUM DATA DOLBY CTL DDC CTL F/R CTL L.MB L.GRV FWD SW REV SW PHOTO IN I/O O O O I I I I O O O O O O O -- -- -- -- -- -- -- -- I I I I O I I O O O O O O I I I Battery voltage detect input terminal Middle point voltage (+0.75V) input in this set Battery voltage detect input terminal Key input terminal (A/D input) Cassette holder open/close detect switch (S701) input terminal "H": cassette holder close, "L": cassette holder open Beep sound signal output terminal (frequency: 1.6 kHz) AMS (Automatic Music Sensor) control signal input from the TA2072AF (IC301) Communication request signal input from the remote commander Serial data output to the remote commander Dolby NR on/off control signal output to the TA2072AF (IC301) "H": dolby NR on Control signal output to the DC/DC converter circuit "H": power on FWD/REV selection signal output to the TA2072AF (IC301) "H": FWD, "L": REV The output terminal for the LED drive signal of the SOUND MB indicator (D705) "H": LED on The output terminal for the LED drive signal of the SOUND GRV indicator (D704) "H": LED on Tape direction switch (S702) input terminal "H": FWD Tape direction switch (S702) input terminal "H": REV Detection signal input from the motor rotation detect circuit Increases power supply voltage The output terminal for the LED drive signal of the a NR indicator (D708) "H": LED on The output terminal for the LED drive signal of the AVLS indicator (D707) "H": LED on The output terminal for the LED drive signal of the BATT indicator (D703) "H": LED on The output terminal for the LED drive signal of the BL SKIP indicator (D706) "H": LED on The output terminal of the muting signal "L": mute on The output terminal for the plunger drive signal "H": plunger on Control signal output to the motor rotation detect circuit "H": rotation detect circuit on Connected to crystal oscillator (X701 32.768 kHz) for the system clock Connected to crystal oscillator (X701 32.768 kHz) for the system clock Power supply terminal (+1.5V) Ground terminal The input terminal for the test (fixed at "L") Function The output terminal for the control signal to start the motor Turn the motor when set to "H" The output terminal for selecting the rotating direction of the motor Turn the motor counterclockwise when set to "H", and clockwise when set to "L" The output terminal for the brake signal to be applied to the motor Turn the brake on when set to "H" System reset signal input from the reset signal generator (IC703) "H": reset
25
Pin No. 39 40 41 42 43 44
Pin Name VDD BOOST CTL MB/GRV CTL LOAD CTL AVLS CTL AMP CTL
I/O -- O O O O O Power supply terminal (+1.5V)
Function Bass-boost on/off control signal output to the TA2072AF (IC301) MEGA BASS/GROOVE selection signal output to the TA2072AF (IC301) Load control signal output terminal AVLS (Automatic Volume Limiter System) on/off control signal output to the TA2072AF (IC301) Amp on/off control signal output to the TA2072AF (IC301)
26
SECTION 7 EXPLODED VIEWS
NOTE: · -XX and -X mean standardized parts, so they may have some difference from the original one. · Color Indication of Appearance Parts Example: KNOB, BALANCE (WHITE) . . . (RED) Parts Color Cabinet's Color · Items marked "*" are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. · The mechanical parts with no reference number in the exploded views are not supplied. · Accessories and packing materials are given in the last of the electrical parts list. · Abbreviation 9E : No indication of country of origin
(1) CASE SECTION
2 4
5
2
6 11
MT-WMEX550-125
12 7
9 1 2 3 3 8
10
Ref. No. 1 1 1 1 1 1 1 1 2 3 4 5 5
Part No.
Description
Remark
Ref. No. 5 5 6 6 7 8 8 9 10 10 10 10 11 12 12
Part No. X-3374-616-1 X-3374-617-1 3-930-794-11 3-930-794-21 3-009-677-01 3-009-676-01 3-009-676-11 3-009-668-01 3-009-681-41 3-009-681-51 3-009-681-61 3-009-681-71 3-015-995-01 3-389-523-15 3-389-523-16
Description
Remark
X-3374-623-1 CASE ASSY (560CE-B) (BLACK) (EX560: EXCEPT E) X-3374-624-1 CASE ASSY (560CE-S) (SILVER) (EX560: EXCEPT E) X-3374-625-1 CASE ASSY (560CE-L) (BLUE) (EX560: EXCEPT E) X-3374-626-1 CASE ASSY (560-B) (BLACK) (EX560: E) X-3374-627-1 CASE ASSY (560-S) (SILVER) (EX560: E) X-3374-628-1 X-3374-629-1 X-3374-630-1 3-704-197-01 3-010-838-24 CASE ASSY (560-L) (BLUE) (EX560: E) CASE ASSY (562CE-H) (EX562: 9E, AEP) CASE ASSY (562-H) (EX562: US, E) SCREW (IB LOCK) LOCK, SERRAT IB
LID ASSY (L), CASSETTE (BLUE) (EX560) LID ASSY (H), CASSETTE (EX562) KNOB (HOLD) (EX560) KNOB (HOLD) (EX562) KNOB (OPEN) ORNAMENT, REEL (EX560) ORNAMENT, REEL (EX562) PLATE, C LOCK LID, BATTERY CASE (BLACK) (EX560) LID, BATTERY CASE (SILVER) (EX560) LID, BATTERY CASE (BLUE) (EX560) LID, BATTERY CASE (EX562) SPACER (CASSETTE) SCREW 1.4X2 (S) (for BLUE, SILVER) SCREW 1.4X2 (B) (for BLACK)
X-3374-439-2 HOLDER ASSY, CASSETTE X-3374-614-1 LID ASSY (B), CASSETTE (BLACK) (EX560) X-3374-675-1 LID ASSY (S), CASSETTE (SILVER) (EX560)
27
(2) MAIN BOARD SECTION
61 62 63 60 64 55
not supplied HP901
65
59
S901
57 69 55 56 68 66
not supplied
67
J801 not supplied
53 58 51
52 54
53
Ref. No. 51 52 53 54 55 56 56 56 57 58 59 60 60 Part No. 3-010-838-24 3-009-669-01 3-375-114-11 3-009-670-01 3-704-197-01 Description LOCK, SERRAT IB TERMINAL (+), BATTERY SCREW TERMINAL (-), BATTERY SCREW (IB LOCK) Remark Ref. No. 61 62 63 64 65 66 67 68 69 HP901 J801 3-928-465-01 DETENT, CASSETTE 3-012-423-01 COVER (GX), MD (EX560: 9E, E/EX562: US, 9E, E) 3-012-423-11 COVER (GX), MD (EX560: AEP, French, East European/EX562: AEP) S901 Part No. X-3372-850-1 3-704-413-31 X-3372-849-1 X-3374-438-1 3-009-667-01 3-011-277-01 3-015-994-01 3-328-483-11 3-015-313-01 1-500-420-11 Description PINCH LEVER (N) ASSY SCREW (M1.4X7.2) PINCH LEVER (R) ASSY BRACKET ASSY SPRING, TENSION COVER (B) (Y), MD SPACER (HP) SHEET SHEET HEAD, MAGNETIC (PLAYBACK) Remark
A-3061-558-A MAIN BOARD, COMPLETE (EX560: AEP, 9E, E, East European/EX562: AEP, 9E, E) A-3061-606-A MAIN BOARD, COMPLETE (EX560: French) A-3061-608-A MAIN BOARD, COMPLETE (EX562: US) 3-010-520-01 COVER, SW 3-009-675-01 HOLDER
1-779-080-11 JACK, DC (POLARITY UNIFIED TYPE) (DC IN 1.5V) 1-762-793-22 SWITCH, LEAF (ATS)
28
(3) MECHANISM DECK SECTION (MT-WMEX550-125)
120 119 124 122 115 118 117 116
PM901
123
M901
121
126 125 127
not supplied
128
114
108
not supplied
113
107
106 101
103 105 104 103 102 104 111 110 109
112 110
Ref. No. 101 102 103 104 105 106 107 108 * 109 110 111 112 113 114 115
Part No. X-3374-440-1 3-007-457-01 3-010-954-01 3-010-274-02 3-007-455-01 3-007-458-01 3-007-456-01 3-007-454-01 3-010-272-01 3-366-017-01 3-007-429-01 3-918-943-01 3-007-960-01 3-007-439-01 3-007-436-01
Description CHASSIS ASSY (J2) SPRING (TEN), TENSION SPRING (BT), COMPRESSION TABLE, REEL SPRING (R), TORSION SPRING (H/B), TENSION SPRING (N), TORSION SPRING (FR), TORSION BELT, RETAINER BUSHING (CAPSTAN) WASHER (R), STOPPER WASHER, STOPPER SPRING (EJECT) (Y), TORSION SLIDER (LOCK) SPRING (TRIGGER), TORSION
Remark
Ref. No. 116 117 118 119 120 121 122 123 124 125 126 127 * 128 M901 PM901
Part No. X-3372-848-1 3-932-724-21 3-386-694-11 X-3374-751-1 3-007-430-01 3-007-428-01 X-3374-750-1 3-007-434-01 3-007-427-01 X-3372-853-1 3-007-435-01 3-007-432-01 3-011-276-02 1-698-885-21 1-454-674-31
Description CLUTCH ASSY (M) WASHER WASHER FLYWHEEL (N) ASSY BELT WASHER (R) FLYWHEEL (R) ASSY PULLEY (REVERSE) SCREW (IB LOCK) LEVER (FRG) ASSY GEAR (FR) SHEET (R), REFLECTION RETAINER (Y), MOTOR MOTOR (CAPSTAN/REEL) SOLENOID, PLUNGER
Remark
29
MAIN
NOTE: · Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. · -XX and -X mean standardized parts, so they may have some difference from the original one. · RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable · Abbreviation 9E : No indication of country of origin
SECTION 8 ELECTRICAL PARTS LIST
· Items marked "*" are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. · SEMICONDUCTORS In each case, u: µ, for example: uA. . : µA. . uPA. . : µPA. . uPB. . : µPB. . uPC. . : µPC. . uPD. . : µPD. . · CAPACITORS uF: µF · COILS uH: µH When indicating parts by reference number, please include the board.
Ref. No.
Part No.
Description
Remark
Ref. No. C301 C302 C303 C304 C305 C306 C307 C308 C309 C310 C311 C312 C313 C314 C315 C316 C317 C318 C319 C320 C321 C322 C323 C324 C325 C326 C327 C501 C502 C601 C602 C603 C604 C605 C606 C607 C608 C701 C702 C703 C704 C705
Part No. 1-135-316-11 1-115-467-11 1-109-982-11 1-128-024-11 1-135-316-11 1-110-423-11 1-164-227-11 1-135-180-21 1-115-156-11 1-115-156-11 1-165-128-11 1-109-935-11 1-135-201-11 1-107-823-11 1-115-156-11 1-115-156-11 1-115-467-11 1-135-149-21 1-107-688-11 1-162-964-11 1-162-964-11 1-162-964-11 1-162-964-11 1-162-964-11 1-162-953-11 1-162-964-11 1-162-964-11 1-135-201-11 1-135-201-11 1-162-970-11 1-162-970-11 1-162-970-11 1-107-826-11 1-164-156-11 1-115-467-11 1-107-826-11 1-109-982-11 1-115-156-11 1-115-156-11 1-115-156-11
Description TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP TANTALUM CHIP ELECT CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 22uF 0.22uF 1uF 4.7uF 22uF 2.2uF 0.022uF 3.3uF 1uF 1uF 0.22uF 4.7uF 10uF 0.47uF 1uF 1uF 0.22uF 2.2uF 1.5uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 100PF 0.001uF 0.001uF 10uF 10uF 0.01uF 0.01uF 0.01uF 0.1uF 0.1uF 0.22uF 0.1uF 1uF 1uF 1uF 1uF 20% 10% 10% 20% 20% 20% 10% 20%
Remark 2.5V 10V 10V 10V 2.5V 25V 25V 6.3V 10V 10V 16V 4V 4V 16V 10V 10V 10V 10V 10V 50V 50V 50V 50V 50V 50V 50V 50V 4V 4V 25V 25V 25V 16V 25V 10V 10V 10V 10V 10V 10V 6.3V 25V
A-3061-558-A MAIN BOARD, COMPLETE (EX560: AEP, East European, E/EX562: AEP, E) A-3061-606-A MAIN BOARD, COMPLETE (EX560: French) A-3061-608-A MAIN BOARD, COMPLETE (EX562: US) ********************* < CAPACITOR > C101 C102 C103 C104 C105 C106 C107 C108 C109 C110 C111 C112 C113 C114 C115 C116 C117 C201 C202 C203 C204 C205 C206 C207 C208 C209 C210 C211 C212 C213 C214 C215 C216 C217 C220 1-162-963-11 1-162-963-11 1-128-024-11 1-164-227-11 1-164-677-11 1-115-156-11 1-162-965-11 1-128-014-11 1-164-174-11 1-162-970-11 1-107-823-11 1-115-156-11 1-115-156-11 1-162-964-11 1-162-970-11 1-109-982-11 1-115-156-11 1-162-963-11 1-162-963-11 1-135-151-21 1-164-227-11 1-164-677-11 1-115-156-11 1-162-965-11 1-128-014-11 1-164-174-11 1-162-970-11 1-107-823-11 1-115-156-11 1-115-156-11 1-162-964-11 1-162-970-11 1-115-156-11 1-115-156-11 1-162-953-11 CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 680PF 680PF 4.7uF 0.022uF 0.033uF 1uF 0.0015uF 10uF 0.0082uF 0.01uF 0.47uF 1uF 1uF 0.001uF 0.01uF 1uF 1uF 680PF 680PF 4.7uF 0.022uF 0.033uF 1uF 0.0015uF 10uF 10% 10% 20% 10% 10% 50V 50V 10V 25V 16V 10V 50V 4V 25V 25V 16V 10V 10V 50V 25V 10V 10V 50V 50V 4V 25V 16V 50V 4V 25V 25V 16V 10V 10V 50V 25V 10V 10V 50V
10% 20% 10% 10% 10%
20% 20% 10%
10% 20% 20% 10% 10% 10% 10% 10% 5% 10% 10% 20% 20% 10% 10% 10% 10% 10% 10% 10%
10% 10% 10% 10% 10% 20% 10% 10% 10V 10% 20%
0.0082uF 10% 0.01uF 10% 0.47uF 10% 1uF 1uF 0.001uF 0.01uF 1uF 1uF 100PF 10% 10%
5%
1-135-180-21 TANTALUM CHIP 3.3uF 1-164-156-11 CERAMIC CHIP 0.1uF
20%
30
MAIN
Ref. No. C706 C707 C708 Part No. Description 0.1uF 1uF 100PF Remark 25V 10V 50V Ref. No. Q504 Q601 Q602 Q701 Q702 Q703 Q704 Q705 Q706 Q707 Q708 Q709 Q710 Q711 Q712 Part No. Description Remark 1-164-156-11 CERAMIC CHIP 1-115-156-11 CERAMIC CHIP 1-162-953-11 CERAMIC CHIP < CONNECTOR > CN301 1-766-336-21 CONNECTOR, FFC/FPC 6P < DIODE > D101 D201 D301 D501 D701 D702 D703 D704 D705 D706 D707 D708 D709 8-719-423-35 8-719-423-35 8-719-423-35 8-719-049-09 8-719-404-49 8-719-049-09 8-719-067-79 8-719-067-79 8-719-067-79 8-719-067-79 DIODE DIODE DIODE DIODE DIODE MA8120-H MA8120-H MA8120-H 1SS367-T3SONY MA111 8-729-402-42 8-729-403-17 8-729-403-17 8-729-420-24 8-729-030-53 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR UN5213 XN1215 XN1215 2SB1218A-QRS MSD1819A-RT1 8-729-420-24 TRANSISTOR 2SB1218A-QRS 8-729-403-42 TRANSISTOR XN1401 8-729-402-84 8-729-422-18 8-729-421-26 8-729-230-72 8-729-422-51 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR XN4601 XN4315 UN5216 2SA1362YG UN5110-QRS
5%
DIODE 1SS367-T3SONY LED CL-170HR-CD-T-AB (BATT) LED CL-170HR-CD-T-AB (SOUND GRV) LED CL-170HR-CD-T-AB (SOUND MB) LED CL-170HR-CD-T-AB (BL SKIP)
8-729-421-26 TRANSISTOR UN5216 8-729-230-72 TRANSISTOR 2SA1362YG 8-729-422-51 TRANSISTOR UN5110-QRS < RESISTOR >
8-719-067-79 LED CL-170HR-CD-T-AB (AVLS) 8-719-067-79 LED CL-170HR-CD-T-AB (a NR) 8-719-423-35 DIODE MA8120-H < FERRITE BEAD >
R101 R102 R103 R104 R105 R108 R109 R110 R111 R112 R113 R114 R114 R115 R151 R152 R201 R202 R203 R204 R205 R208 R209 R210 R211 R212 R213 R214 R214
1-216-812-11 1-216-847-11 1-216-831-11 1-216-824-11 1-216-825-11 1-218-270-11 1-216-834-11 1-216-852-11 1-216-822-11 1-216-824-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
180 150K 6.8K 1.8K 2.2K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
FB101 FB201 FB301
1-414-235-11 INDUCTOR, FERRITE BEAD (EXCEPT EX560: French) 1-414-235-11 INDUCTOR, FERRITE BEAD (EXCEPT EX560: French) 1-414-235-11 INDUCTOR, FERRITE BEAD < IC >
1.1K (1608) 12K 5% 390K 5% 1.2K 5% 1.8K 5% 100 39K
1/16W 1/16W 1/16W 1/16W
1-216-809-11 METAL CHIP 1-216-840-11 METAL CHIP 1-216-845-11 METAL CHIP 1-216-793-11 RES, CHIP 1-220-370-91 RES, CHIP 1-220-370-91 1-216-812-11 1-216-847-11 1-216-831-11 1-216-824-11 1-216-825-11 1-218-270-11 1-216-834-11 1-216-852-11 1-216-822-11 RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP
IC301 IC601 IC701 IC702 IC703 IC704
8-759-359-76 8-759-356-46 8-759-479-49 8-759-280-85 8-759-430-08
IC IC IC IC IC
TA2072AF MM1279XVBE MSM6576-83GS-K PST9010NL PST9008NL
5% 1/16W 5% 1/16W (EXCEPT EX562: US) 100K 5% 1/16W (EX562: US) 4.7 (1608) 62 (EX560: French) 62 (EX560: French) 180 5% 150K 5% 6.8K 5% 1.8K 5% 2.2K 5% 1.1K (1608) 12K 5% 390K 5% 1.2K 5% 1.8K 100 39K
8-759-469-63 IC S-81215SGUP-DQK-T1 < JACK >
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
J701 J801
1-778-930-21 JACK 7P (2 REMOTE) 1-779-080-11 JACK, DC (POLARITY UNIFIED TYPE) (DC IN 1.5V) < CHIP CONDUCTOR >
JC801
1-216-296-00 CONDUCTOR, CHIP (3216) < PHOTO INTERRUPTER > 1-216-824-11 METAL CHIP 1-216-809-11 METAL CHIP 1-216-840-11 METAL CHIP 1-216-845-11 METAL CHIP 1-216-793-11 RES, CHIP 1-218-891-11 1-216-839-11 1-216-825-11 1-218-295-11 1-216-821-11 RES, CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP 5% 1/16W 5% 1/16W 5% 1/16W (EXCEPT EX562: US) 100K 5% 1/16W (EX562: US) 4.7 (1608) 68K (1608) 33K 5% 2.2K 5% 43K (1608) 1K 5% 4.7 (1608) 150K 5%
PH701
8-719-988-15 PHTO REFLECTOR PR-11-C < TRANSISTOR > R215
Q301 Q302 Q303 Q304 Q305 Q501 Q502 Q503
8-729-022-66 8-729-422-39 8-729-403-17 8-729-230-72 8-729-421-23
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
XN1210-TX XN4404 XN1215 2SA1362YG XN1216
R301 R302 R303 R304 R305 R306 R307
1/16W 1/16W 1/16W
8-729-420-24 TRANSISTOR 2SB1218A-QRS 8-729-115-28 TRANSISTOR BN1L3Z-K 8-729-403-17 TRANSISTOR XN1215
1-216-793-11 RES, CHIP 1-216-847-11 METAL CHIP
1/16W
31
WM-EX560/EX562 MAIN
Ref. No. R308 R309 R501 R502 R604 R605 R606 R607 R701 R702 R703 R704 R705 R706 R707 R708 R709 R710 R711 R712 R713 R714 R715 R716 R717 R718 R719 R720 R721 R722 R723 Part No. Description 2.7K 47K 220K 10K 470 5.6K 100 22K 470 330K 220K 3.3K 220K 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Remark 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W Ref. No. Part No. Description < THERMISTOR (POSITIVE) > THP601 1-810-794-11 THERMISTOR, POSITIVE 1-216-833-11 1-216-817-11 1-216-830-11 1-216-809-11 1-216-837-11 1-216-817-11 1-216-851-11 1-216-849-11 1-216-827-11 1-216-849-11 1-216-849-11 1-218-870-11 1-216-851-11 1-216-845-11 1-218-836-11 1-218-845-11 1-218-847-11 1-218-849-11 1-218-866-11 1-216-849-11 1-216-849-11 1-216-827-11 1-216-821-11 1-216-821-11 1-216-162-00 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP METAL CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP < VIBRATOR > X701 1-760-872-11 VIBRATOR, CRYSTAL (32.768kHz) ************************************************************** MISCELLANEOUS *************** 1-500-420-11 HEAD, MAGNETIC (PLAYBACK) 1-779-080-11 JACK, DC (POLARITY UNIFIED TYPE) (DC IN 1.5V) M901 1-698-885-21 MOTOR (CAPSTAN/REEL) PM901 1-454-674-31 SOLENOID, PLUNGER S901 1-762-793-22 SWITCH, LEAF (ATS) ************************************************************ ACCESSORIES & PACKING MATERIALS ******************************** 1-475-181-11 REMOTE CONTROL UNIT (RM-WME654) (EX562: AEP, 9E, E) 1-505-535-11 HEADPHONE (WITH REMOTE CONTROL) (EX560) 1-505-784-11 HEADPHONE, REMOCON (MDR-WME552) (EX562: US) 3-860-970-11 MANUAL, INSTRUCTION (ENGLISH, FRENCH, GERMAN) (AEP, French) 3-860-970-21 MANUAL, INSTRUCTION (DUTCH, SWEDISH, PORTUGUESE) (AEP) 3-860-970-31 MANUAL, INSTRUCTION (SPANISH, ITALIAN, DANISH) (AEP) 3-860-970-41 MANUAL, INSTRUCTION (ENGLISH, KOREAN, CHINESE) (E) 3-860-970-51 MANUAL, INSTRUCTION (ENGLISH, KOREAN, CHINESE) (9E) 3-860-970-61 MANUAL, INSTRUCTION (ENGLISH) (US) 3-918-937-01 CASE, CARRYING 8-953-171-91 HEADPHONE MDR-ED136MP/K1 SET (EX562: AEP, 9E, E) HP90 J801 Remark 1-216-826-11 METAL CHIP 1-216-841-11 METAL CHIP 1-216-849-11 METAL CHIP
220K 5% 9.1K (1608) 330K 5% 100K 5% 360 (1608) 820 (1608) 1.0K (1608) 1.2K (1608) 6.2K (1608) 220K 5% 220K 3.3K 1K 1K 33 (3216) 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
1-216-162-00 RES, CHIP 1-216-817-11 METAL CHIP 1-216-817-11 METAL CHIP
33 (3216) 470 5% 470 5%
1/16W 1/16W
< COMPOSITION CIRCUIT BLOCK > RB301 RB601 RB602 RB701 1-233-872-21 1-233-873-21 1-233-576-11 1-233-418-11 RES, NETWORK (CHIP TYPE) (3216) RES, NETWORK (CHIP TYPE) (3216) RES, CHIP NETWORK 100 RES, CHIP NETWORK 3.3K (3216) < VARIABLE RESISTOR > RV301 RV601 1-225-342-11 RES, VAR, CARBON 10K/10K (VOLUME ) 1-223-576-11 RES, ADJ, METAL GLAZE 2.2K < SWITCH > S701 S702 S703 S704 S705 S706 S707 S708 1-762-970-21 1-572-581-11 1-572-922-11 1-692-453-11 1-692-453-11 SWITCH, PUSH (1 KEY)(CASSETTE HOLDER) SWITCH, SLIDE (DIRECTION) SWITCH, SLIDE (CHOLD) SWITCH, KEY BOARD (p) SWITCH, KEY BOARD (9( REPEAT)
1-692-453-11 SWITCH, KEY BOARD (FF) 1-692-453-11 SWITCH, KEY BOARD (REW) 1-692-453-11 SWITCH, KEY BOARD (FUNCTION)
Sony Corporation
9-923-345-11
Personal A&V Products Company
32
98B0583-1 Printed in Japan © 1998. 2 Published by Quarity Engineering Dept. (Shibaura)