Text preview for : N3760w.pdf part of ViewSonic VS10847-1P VS10848-1E VS10846-1E N3260w
N3760w
N4060w
VS10847-1P
VS10848-1E
VS10848-1P
VS10846-1E
VS10846-1P
Back to : N3760w.part1.rar | Home
Service Manual
ViewSonic N3260w
N3760w
N4060w
Model No. VS10847-1E
VS10847-1P
VS10848-1E
VS10848-1P
VS10846-1E
VS10846-1P
LCD TV Display
(N3260w/N3760w/N4060w_SM Rev. 1a Dec. 2005)
ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright
Copyright 2005 by ViewSonic Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular
purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time
to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or
changes.
Trademarks
Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.
Revision History
Revision SM Editing Date ECR Number Description of Changes Editor
N3260w 5871S
1a N3760w 5872S Initial Release A. Lu
12/09/05 N4060w 5873S
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
i
TABLE OF CONTENTS
1. Preface 1
2. Block Diagram 2
3. Service Mode 11
4. Assembly and Disassembly Procedure 13
5. Exploded Diagram and Exploded Parts List 16
6. Recommended Spare Parts List 28
7. Printed Circuit board 186
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
ii
1. Preface
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in
a retrieval system or translated into any language in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise, without the prior permission of the company.
Disclaimer
We make no representations or warranties, either expressed or implied, with respect to the contents of this
document, and specifically disclaims any warranties, merchantability or fitness for any particular purpose.
Further, reserves the right to revise this publication and make changes in the contents without obligation to
notify any person of such revision or change.
All rights reserved
VGA and XGA are registered trademarks of International Business Machines Co. Inc.
Product safety notice
Many electrical and mechanical parts in this product include specific, safety related characteristics. These
characteristics may not be immediately obvious by visual inspection and the protection these components
offer can not necessarily be obtained using replacement components with the same voltage or power ratings.
Replacement parts with specific safety characteristics are identified in this manual and its supplements.
Electrical components having such features are identified by shading on the schematic diagram and in the
parts list. Before replacing components, read the parts list in this manual thoroughly.
The use of substitute parts which do not have the same safety characteristics as those indicated in the parts
list may cause electrical shock, fire, x-ray emissions, or other hazards.
Service notes
1. When replacing circuit boards or components, clamp the lead wires to the terminals before soldering.
2. When replacing a high power resistor (oxide metal film resistor) on a circuit board, keep the resistor at
least 10 mm (0.5-inch) from the circuit board.
3. Keep leads and wires away from high voltage and high temperature components.
4. If any fuse in the product is blown, replace it only with the correct fuse specified in the parts list.
Handling of broken glass and liquid crystal leakage
If the LCD is damaged, liquid crystal leakage may occur and the glass may shatter into small pieces. Do not
touch the broken glass or liquid crystal which is toxic. In addition to possible cuts resulting from broken
glass, toxic leakage may cause skin irritation or poisoning. If liquid crystal enters your eyes or mouth, you
should immediately rinse with clean water and consult a doctor.
Important safety information
1. Read all these instructions.
2. Save these instructions for later use.
3. Unplug this television set from the wall outlet before cleaning.
4. Do not use accessories not recommended in the user manual as they may damage the product.
5. Do not use this product in wet locations such as near a bathtub, washbowl, kitchen sink, laundry tub,
swimming pool, or in a wet basement.
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
1
6. Do not place this product on an unstable cart, stand, or table. The television receiver may fall and cause
serious injury as well as possibly damaging the product. Use only with a cart or stand recommended
by the manufacturer or sold with the product. Wall or shelf mounting should follow manufacturer's
instructions and only use a mounting kit as recommended by the manufacturer.
7. Blocking the ventilation holes can cause overheating and fire. Take care not to block any ventilation holes
when siting the television close to walls or other objects. Never install this product in a closed cabinet or
bookcase unless sufficient ventilation is provided.
8. This television should be operated using only the type of power source indicated on the label and in the
user manual. If you are unsure what your home power supply is, you should consult the Power Company
or talk to your television dealer.
9. This television is equipped with a plug designed to fit only one way in the power socket. The earth pin is
an important safety feature of the plug. If the plug does not fit your outlets or your outlets do not include
a hole for the earth pin, you should consult a qualified electrician about replacing the socket.
10. Do not rest anything on the power cord and do not allow the power cord to lie in a position where it is
likely to be stepped on or tripped over.
11. Follow all warnings and instructions marked on the television receiver.
12. During thunderstorms and when the television is unused for extended periods of time, you should
unplug the power cord from the outlet and disconnect the antenna.
13. External antenna systems should be sited away from overhead power lines and away from electrical
circuits. Extreme caution should be exercised when erecting an outside antenna. Touching overhead
power cables can be fatal.
14. Do not overload power outlets or extension cords as fire or electric shock can result.
15. Never push anything into the television through the ventilation slots as they may come into contact with
high voltage elements of the device and cause electric shock or fire. Take care never to spill liquids into
the product.
16. Servicing of this product should only be carried out by qualified service technicians.
17. Unplug this product from the power source and consult a qualified service technician in the following
cases:
· The power cord is damaged or frayed.
· Liquid is spilled into the television.
· The television is exposed to rain or water.
· The television does not operate as the user manual describes. In this case, use only the controls
covered by the operating instructions. Improper adjustment of this equipment using controls not
covered in the user manual may result in damage to the product that may require extensive work
by qualified technicians to rectify.
· The television or cabinet is damaged.
· The television shows a change in performance that indicates a need for servicing.
18. When replacement parts are used, ensure that the technician uses only parts recommended by the
manufacturer. Unauthorised replacement parts may cause a fire or electric shock.
19. After servicing, ensure that the technician performs routine safety checks to determine whether the
television is in a safe operating condition.
20. When moving this equipment, care should be taken to prevent damage due to dropping, falling or
impact.
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
2
2. Block diagram
Power Circuit:
Exchanged Power Model provides this machine 3 batch power: +12V, +5V and +24V. +5V is Stand-By power,
provides every circuit in main board needed power with +12V.+24 is back light power.
A.Cold-Opening Mode
·Exchanged Power Model (+12V, +5V), via J17 jack transmits voltage to digital main board.
·When connect with AC220V, exchanged power produces +5V voltage immediately (circuit mark 5V_SB)
and provides CPU U83 the needed stand-by voltage to turn on the machine.
·This machine is in Stand-By Mode now.
B.Stand-By Mode(+5V)
·In Stand-By Mode, Exchanged Power Model provides +5V voltage (circuit mark 5V_SB) and provides
the needed power to CPU U83 PIC 16F505.
·When this machine is in Stand-By mode, only U83 PIC16F505 keeps working, so the system can assure
the consumption power is < 1.5W in Stand-by Mode.
·The Block Diagram 1 shows Stand-By Mode.
C.Power ON Mode(+5V ,+12V)
·When the system receives the start order by Power Key of the remote control or Power ON/OFF of the
control panel, it will process the following action.
·The system hands over CPU's masterdom from CPU U83CPU to U29 M30620 .
·When exchanged power receives the start order by CPU U83, (signal mark POWER_ON), via Q33
MMBT3904 to control Exchanged Power Model provides +12V voltage (signal mark VCC_12V). Every
batches of digital board circuit would be able to process Power ON procedure.
·After every batches of digital board process Power ON procedure,U29 M30620 via BKLT_CNTL to
control circuit and light the back light.
·The Block Diagram 2 shows the voltage of Power ON Mode and IC.
U83 U29
PIC16F505 M30620
CPU CPU
POWER_ON BKLT_CNTL
DigitalINVERTER
Exchanged Power
+12V
+12V(VCC-12V)
SW
+5V +12V (5V_SB)
+24V(INVERTER)
24V
SW
Block Diagram (1)
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
3
U80 VDDMQ U38
5V_SB SI4435 +5V U39&U40 VDDM 4MX32
SW APL1084-3.3 DDR
SB-PWR
1.8V
U83 U77 3.3V U41 PAVDD1~3 U37
PIC16F505
CPU PWM APL1117-1.8 PDVDD EX-52
U43 +3.3V
APL1084-3.3 AVDDSP/CDDH/LVDSVCC/LVDSV
+12V U81 VCCTU(+5V)
VCC_12V 9VA(+9V) U21/U30/U67 TU1(TUNER)
APL1084-ADJ
9AV(+9V) APL1117_5 5VR-5V-1_CPU(+5V)
9VB(+9V) U22 U29 M30620 (CPU)
U23 9VC(+9V)
9VD(+9V) SCART SW 5VAMP(+5V)
LM7809 U65 TDA1308
V12B(+12V) CXA2125Q (EARPHON AMP)
U78 PVDD(+12V) LCD
Switch LVDS(J10)
SI4435
U76 -9V U63 -5VOP(-5V) U51/U52/U57/U58/U59
MIC4680 7905 U61/U62
OP AMP
U49 V8AU(8V) U64 5VOP(+5V)
APL1117-5
LM7808
U48
MSP3410/MSP3411
SOUND PROCESSOR
U50
APL1117-5
VCCA(+5V)
U66
D-AMP
TPA3004
Block Diagram (2)
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
4
Antenna Circuit:
· Tuner FQ1216 receives the signal comes from CATV or antenna RF PAL/SECAM signal and demodulates
image composite signal (signal mark TV 1) and audio medium frequency signal (signal mark SIF1).
· Image composite signal (signal mark TV 1)
· Via Q6 Video buffer(signal mark TV1_EX) than enter U37 Scaler IC EX-52 CVBS1 input jack (Pin
242) directly. Switches with other input signals in inner switch circuit.
· Other one via Q9 buffer (signal mark TV1_SW) enter U22 SCRAT SWITCH IC CXA2125
TV_CVBS VIN_15 input jack (Pin23) and switch with other input signals to process POP/PIP
signals selection .
· Audio medium frequency signal (signal mark TVAF1), transmits to U48 MSP3410/MSP3411
SOUNDPROCESSOR PIN50 to demodulate audio IF and stereo.Than switches signal source with other
Audio Source (PC AUDIO,U22 SCART SWITCH IC CXA2125Q AUDIO OUT).PIN 20,21 outputs Audio
R/L signal, and amplify by OP AMP U57 U59 TL082 then enter D-amplifier U66 TPA3004 output.
UHF ANT
Video(TV1) TV1_EX U37
Q6
EX-52
Buffer CVBS1(242)
VHF ANT
TU1
CATV
Tuner
U48
FQ1216 MSP3410/MSP3411
U57&59 U57
SOUND
TL082
PROCESSOR RM_OUT
Audio(TVAF1)
OP AMP TPA3004
LM_OUT
D-AMP
PC U22
SCART
Audio AUDIO SW
Block Diagram (3)
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
5
CVBS Power saving
AV PIC16F505
TUNER1
MCU I2C
Y
Video switch
S M30620SPGP DDRRAM
CXA2125Q Flash ROM
ViewSonic Corporation
C VIDEO SDRAM EEPROM 4M BITS
4M BITS 64K BITS
BUFFER 64K BITS
TV
VIDEO VIDEO R/L_4 IN (22,24) VIDEO TV1_EX CVBS1 (242)
BUFFER BUFFER VOUT_7 CVBS (39) BUFFER CVBS_EX CVBS2 (243)
VOUT_5 Croma (41) VIDEO CHROMA_EX
C (231)
TV_CVBS IN (23) BUFFER LUMA_EX
TV VIDEO
BUFFER VIDEO CVBS3 (244)
Y IN(10) BUFFER
CHROMA_7 LVDS
C IN(6) YV VIDEO Panel
Video CVBSIN(8) VOUT_6 CVBS (44)
SCART1 BUFFER AI23 U25 Video decode + 3D
RGB IN R/G/B IN(4,2,63) VIDEO comb-filter + 3D
SB CVBSIN(8) LUMA_7
Audio R/L BUFFER AI13 deinterlace x2 +
R/L IN(3,5) CVBS_7 8BIT_XPORT
CVBS_SW VIDEO Scalarx2
VOUT_4 (49) AI11
SCART2_VO BUFFER EX52
Video VIDEO R AI14
CVBSIN(55)
SCART2 RGB IN BUFFER AI21
R/G/B IN(57,59,61)VOUT_3 R (46)
SB
VIDEO G
6
Audio R/L VOUT_3 G (47) AI31 Y_G2 (248)
R/L IN(12,14) BUFFER
Video B PB_B2(233)
VIDEO Y_G1 (246)
RGB IN CVBSIN(21) VOUT_3 B (48) AI41 PC in
R/G/B IN(17,15,13) BUFFER PB_B1(232) PR_R2(226)
SCART3 SB PR_R1(225) AIN_HS(10)
Audio R/L
R/L IN(16,18) AIN_VS(11)
VIDOE OUT Video decode
SAA7117
EDID
24LC21A
VIDOE OUT
I2C
HD_Y1 HDMI receiver
HDMI
SIL9011
HDTV2
Y/Pb/Pr HD_Pb1
HD_Pr1 EDID
24LC21A
Confidential - Do Not Copy
N3260w/N3760w/N4060w
AV (Video) Input circuit (AV,S,SCART1-3):(AS block diagram 4)
· AV in/output signal includes:SCART 1, SCART 2 , SCART 3,(only 37"and 40"support SCART 3)
· 32"SCART 2 (label mark SCART 1 )AV output ,only output TV audio and video signals and will not
modify when signals swicthing .
· AV IN:AVSHDTV(Y/Pb/PR) HDMIPC(VGA)
· SCART 1 2 3:
· U22 Input
Receives outside AV DEVICE R, G, B Composite video output singal and respectively inputs IC
U22 Video/Audio SWITCH CXA2125Q SCART Input port (1)(2)(3)and switches signal with other
Video Source in inner switch circuit.
· U22 Output
R G B signal output from U22 PIN 46,47 to U25 SAA7117 Video decoder and translated into 8
BIT Digital RGB signal.Via U37 EX-52 Digital Port DIN[0:23] then switch signal with other Video
Source in inner switch circuit .
· S
· U22 Input
Receives outside AV DEVICE CVB signal and S(Y/C) video output signal .S(Y/C) inputs IC U22
Video/Audio SWITCH CXA2125Q SCART Input PIN6,10 and CVBS input PIN21 then switches
signal with other Video Source in inner switch circuit.
· U22 Output
S(Y/C) output respectively from U22 PIN44 and 41 than repart signals into CHROMA-EX/
LUMA and LUMA _7/CVBS_7. CHROMA-EX/LUMA input U37 EX-52 and LUMA _7/CVBS_7
input U25 SAA7117 Video decoder to process PIP/POP fucation.
CVBS output from U22 PIN 49,via buffer(Q8) input U25SAA7117 Video decoder to process PIP/
POP funcation.
· HDTV Receive outside AV DEVICE Component Video signal , Y transmits to U37 EX-52 PORT
Y_G1(PIN246)Pb transmits to U37 EX-52 PORT PB_B1 (PIN-232)Pr transmits to U37 EX-52 PORT
PB_R1 (PIN225) than switch signal with other Video Source in inner switch circuit.
· HDMI:Receive outside AV DEVICE HDMI Digital , switching U16 Sil9011 Digital Video signal
Decode to 24 bits Digital RGB signal DIN[0:23] than transmits to U37 EX-52 Digital PORT DIN[0:23]
and switch with other Vedio source signals in EX-52.
· PC(VGA) signal includes: RGBHS (Horizontal sync signal)VS (Vertical sync signal), R
transmits to U37 EX-52 PORT PR_R2_G1(PIN226)G transmits to U37 EX-52 PORT Y_G2(PIN248)
B transmits to U37 EX-52 PORT PB_B2(PIN233) and switch with other EX-52 inner signals.
HS(Horizontal sync signal) transmits to U37 EX-52 PORT AIN_HS(PIN10),VS (Vertical sync signal )
transmits to U37 EX-52 PORT AIN_VS(PIN11).
· U37 EX-52 transmits digital Video via LVDS(TXOUT0:3+,TXOUT0:3-) to PIN Set J10 and show out the
image.
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
7
AV Input Circuit(Audio): (AV,S,SCART1-3,):
· AV Audio in/output signal includes:SCART 1, SCART 2 , SCART 3,(only 37"and 40"support SCART 3)
· 32"SCART 2 (label mark SCART 1 )Audio output ,only output TV Audio signal and will not modifiy
when signals swicthing .
· AV Audio input signal includes:AVSHDTV(Y/Pb/Pr)PC(VGA) Audio R/L
· SCART 1 2 3:SCART Audio R/L input U22Scart PIN (3,5),(12,14),(16,18)to switch with other Audio
Sources than input U48 MSP3410/MSP3411 SOUND PROCESSOR PIN35,36 to switch signals with TV
and PC Audio.
· AV left and right audio signals input U22 PIN22,24 to switch with other audio input source than input
U48 MSP3410/MSP3411 SOUND PROCESSOR PIN35,36 than to switch signal with TV and PC Audio.
· Audio signal output from U48 MSP3410/MSP3411 SOUND PROCESSOR PIN 20,21 directly to Audio
amplifier U66TPA3004 to amplify audio signals than ouput.
· U48MSP3410/MS3411 sound PIN17,18 output earphone signal and variable audio voice .Earphone
signal transmit to U65TDA AMP to amplify audio signals and variable audio voice than output to
audio output RCA jack.
· S (YC) share audio left and right audio signals with AV.
· HDTV (Y/Pb/Pr) left and right audio signals input to U22 PIN 27,29
· PC(VGA) left and right audio signals input to U48 MSP3410/MSP3411 SOUND PROCESSOR PIN
41,42.
· HDMI Audio be decoded to I2s digital audio signal by U16 Sil9011 Digital Vedio Decode and translate
into analog audio signal than input U48 MSP3410/MSP3411 SOUND PROCESSOR PIN 38,39.
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
8
Audio R/L
ViewSonic Corporation
SCART1 R/L IN(3,5)
SC01 R/L
SC02 R/L Audio R/L
SCART2 R/L IN(12,14)
SCART3 Audio R/L TV
R/L IN(16,18)
Audio R/L
AV R/L_4 IN (22,24)
Audio processor
SIF1 (51) AUDIO Headphone
Audio R/L CXTVR/L SC0 R/L (17,18) SCO R/L
9
R/L TV(40,42) SC1_IR/L (45,44) BUFFER
Y/Pb/Pr R/L_4 IN (27,29)
SCO1 R/L(28,29)
R/L_VCR
ROUT1(VCR)(34,36) SC4_IR/L (36,35)
TPA3004D2 R
SCO2 R/L(25,26) AUD_R(20)
AUDIO
AUDIO
Audio R/L
SC2_IR/L (41,42)
AMP
AMP
PC AUD_L(21)
10W + 10W L
SC3_IR/L (39,38)
Audio switch MSP3410
CXA2125Q
DAC L/R SCO1 R/L
U16 SDO
Confidential - Do Not Copy
SIL9011 SCK U47
HDMI MCLK CS4334 SCO2 R/L
WS
N3260w/N3760w/N4060w
CPU circuit
· U29 M30620 is 16 BITS CMOS CPUthe main CPU of the system.
· (Address Bus)A[0:7]and A[8:18]
· Data Bus) AD[0:7]
· U31 W29C040 is 4Megabit(512K X 8- bit) Flash Memorythe main function is store program.
· U34 is Reset ICreset CPU U29 at the beginning of Power ON
· CPU U29 via I2C SDA/SCL(SDA_5V /SCL_5V) to connect and control U37 SCALER IC EX52 and
transmits data via Address BusA[0:7] and Data Bus AD[0:7].
· U83 PIC16F505 is the second CPUthe main function is instead the main CPU U29 M30620 to detect
Remote controller and control On/Off button to order the system power on while this machine is in
Stand-By mode. This step can assure this machine has low consumption power as it is in Stand-By
mode.
AD[0:7]
U34 REST U29 U31
MAX809 M30620 W29C040
A[0:7]
CPU Flash Memory
IR
A[8:18]
ON/OFF
U37
SDA
U83 EX-52
SCL
PIC16F505 SCALER
CPU
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
10
3. Service mode
An internal settings service menu is provided to allow adjustment of the device by qualified service personal.
Improper use of the internal settings service menu may render the device unusable. Refer to the following
sections to learn how to operate the service menu.
Starting the service mode
To start the service mode of operation and view the internal settings menu, do the following:
1. Switch on the LCD TV and make sure that the TV mode is selected.
2. Press [100]+[9]+[9]+[1] (-/-- button followed by 991 on the number buttons) on the remote control to enter the
internal settings menu.
3. Press and to scroll through the various menu options.
4. Press and to change the menu settings.
5. Press EXIT to save the new settings and exit.
6. Press DISPLAY to switch the service mode pages.
Factory - Options
Firmware_Update >>
LVDS Mapping MapA
EEPROM clear off
Auto Power On off
User Initialize off
Version >>
Factory Restore >>
Color Temperature >>
Factory Option
Firmware Update Connect to the equipment and update new software.
EEPROM clear While it displays the word "OK", it finishes clearing.
Auto Power Up As the order shows "On", it will turn on the power as you
connect to the power plug.
User Initialize off The suitable mode for customers.
Version Display the software version.
Factory Restore Recover the last version, adjusting number of white balance.
TCD3
Bright Middle 024
Contrast Middle 107
Sharpness Middle 002
Color Middle 152
Hue Middle 000
YC DELAY 000
U DELAY 007
V DELAY 005
PWN 095
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
11
Scalar Balance Adjust
R Offset 128
G Offset 128
B Offset 128
R Gain 128
G Gain 128
B Gain 128
White Balance Adjust
R Offset 128
G Offset 128
B Offset 128
R Gain 128
G Gain 128
B Gain 128
Factory Audio
SCART 1 Volume 117
SCART 2 Volume 117
NICAM Prescale 064
AM FM Prescale 026
SCART Prescale 031
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
12
4. Assembly and disassembly procedure
This section covers disassembly and reassembly of LCD TV. Removal of external casing, its individual parts
or internal components can render the product dangerous. There can be a risk of electric shock from exposed
components even when the device is not connected to a power source.
Disassembly
1. Unscrew and remove the pedestal completely.
2. Pull down or out the pedestal.
3. Unscrew and remove the rear cover.
4. Unscrew and remove the main board cover.
5. Unscrew and remove the power circuit board.
Rear Cover
Pedestal
6. Unscrew and remove the LCD connector shield plate .
7. Unscrew and remove the VGA connector .
Main board Cover Power 32" Main board Cover Power
37"&40"
Speaker
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
13
8. Unscrew and remove the AC power connector.
9. Unscrew and remove the power circuit board .
10. Unscrew and remove the main circuit board .
11. Unscrew and remove the main base plate.
12. Unscrew and remove the speakers.
Main board
13. Unscrew and remove the LED board.
14. Unscrew and lift out the LCD panel.
15. Remove the panel support screws from the LCD panel.
16. Remove the panel supports from the LCD panel carefully.
Main base plate
LED board
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
14
Reassembly
Reassembly is the reverse of the disassembly procedure. When reassembling the LCD TV, note the following
points:
The LCD panel is delicate and care should be taken to ensure that it is not scratched when removed.
Do not expose the LCD panel to dust or sharp objects.
When fixing the M-shaped bracket in place, ensure that the screw holes are correctly
lined up before attempting to install the pedestal.
Make sure that the RC sensor cover is in place before installing the LED board.
Make sure that the VGA connector is firmly secured before replacing the rear panel.
Make sure that both speaker cables are connected.
When attaching the speakers, place the main unit and the speakers face down on a soft surface. Line
up the pins on the speakers with the holes in the rear panel and secure each speaker with 2 screws.
When connecting speaker cables, make sure that the marked speaker cable (black) isattached to the
black terminal and the unmarked cable (white) is attached to the red terminal.
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
15
5. Exploded Diagram and Exploded Parts List
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
16
EXPLODED PARTS LIST (N3260w-1E)
ViewSonic Model Number: VS10847-1E
Rev: 1a
Serial No. Prefix: PVB
Item ViewSonic P/N Ref. P/N Description Q'ty
1 C-00004608 7024303007511 FRONT PANEL 1
2 #N/A 7024734022111 NAME PLATE 1
3 #N/A 735527000010G SPK 2
4 #N/A 780PB4010CB06 SCREW 8
5 #N/A 735512000060G SPK 2
6 M-SCW-0824-6962 780PB3010CA01 SCREW 4
7 #N/A 7024414026311 DÉCOR PLATE RM 1
8 B-00004601 7TL3241RN110 LED PWB ASSY 1
9 M-SCW-0824-6962 780PB3010CA01 SCREW 2
10 #N/A 7024503018111 SUPPORT EAR. PWB 1
11 M-SCW-0824-6962 780PB3010CA01 SCREW 2
12 B-00004602 7TL3241RL110 EAR. PWB ASSY 1
13 #N/A 780PS3006CA00 SCREW 2
14 #N/A 7024454014511 CTL KNOB 1
15 M-SCW-0824-6962 780PB3010CA01 SCREW 2
16 B-00004600 7TL3241RH110 CTL PWB ASSY 1
17 M-SCW-0824-6962 780PB3010CA01 SCREW 2
18 #N/A 7024503018011 SUPPORT 1
19 #N/A 780PB4012CB06 SCREW 5
20 #N/A 7024503017011 SUPPORT L.R 2
21 #N/A 780PS4008CB06 SCREW 4
22 #N/A 7333063200502 TFT 1
23 #N/A 7024503016911 SUPPORT TOP/BOTTOM 2
24 M-SCW-0824-6962 780PB3010CA01 SCREW 18
25 #N/A 780PS4008CB06 SCREW 4
26 #N/A 7024503016811 SUPPORT MAIN 1
27 M-SCW-0824-6962 780PB3010CA01 SCREW 16
28 #N/A 7024513006411 SHIELD POWER PWB 1
29 #N/A 780XX40002211 SCREW 4
30 #N/A 7TL3241RA110 POWER PWB ASSY 1
31 #N/A 780PS3006CA00 SCREW 4
32 #N/A 7024504022711 SUPPORT AC 1
33 M-SCW-0824-6962 780PB3010CA01 SCREW 2
34 #N/A 737420500290G AC SOCAT 1
35 #N/A 780XX40002711 SCREW 2
36 B-00004599 7TL3241RF110 MAIN PWB ASSY 1
37 #N/A 780PS3006CA00 SCREW 10
38 #N/A 7024503018311 SUPPORT JACK 1
39 #N/A 780XX40002211 SCREW 3
40 M-SCW-0824-6962 780PB3010CA01 SCREW 4
41 #N/A 7024513005111 SHIELD MAIN PWB 1
42 #N/A 780XX40002211 SCREW 12
43 #N/A 780XX40002211 SCREW 7
44 #N/A 7024413057411 DÉCOR PLATE 1
45 C-00004609 7024313003111 BACK COVER 1
46 #N/A 780PB4012CB07 SCREW 13
47 #N/A 780PS4008CB06 SCREW 2
48 #N/A 7024614016111 DÉCOR SHEET 1
49 #N/A 7024413056311 DÉCOR PLATE TN 1
50 #N/A 7024764051911 LABEL MODEL 1
51 #N/A 7024764041211 LABEL CAUTION 1
52 #N/A 7024413055711 DÉCOR PLATE JACK 1
53 #N/A 7024413056511 DÉCOR PLATE WIRE 1
54 PL-00004616 7024404012711 WIRE CLIP 1
55 #N/A 780PB4012CB07 SCREW 1
56 #N/A 7024413056411 DÉCOR PLATE HENGE 1
57 M-SCW-0824-6963 780PS4012CB08 SCREW 2
58 #N/A 7024503017111 SUPPORT HENGE 1
59 #N/A 780PB4012CB08 SCREW 6
60 C-00004610 7024403012011 BOTTOM BASE 1
61 #N/A 7024503017211 BASE SUPPORT SHEET 1
62 HW-00003604 780XX40002311 SCREW 6
63 #N/A 780XX40002011 SCREW 6
64 #N/A 7024614014311 PAD 6
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
17
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
18
EXPLODED PARTS LIST (N3260w-1P)
ViewSonic Model Number: VS10847-1P
Rev: 1a
Serial No. Prefix: PVD
Item ViewSonic P/N Ref. P/N Description Q'ty
1 C-00004608 7024303007511 FRONT PANEL 1
2 #N/A 7024734022111 NAME PLATE 1
3 #N/A 735527000010G SPK 2
4 #N/A 780PB4010CB06 SCREW 8
5 #N/A 735512000060G SPK 2
6 M-SCW-0824-6962 780PB3010CA01 SCREW 4
7 #N/A 7024414026311 DÉCOR PLATE RM 1
8 B-00004601 7TL3241RN110 LED PWB ASSY 1
9 M-SCW-0824-6962 780PB3010CA01 SCREW 2
10 #N/A 7024503018111 SUPPORT EAR. PWB 1
11 M-SCW-0824-6962 780PB3010CA01 SCREW 2
12 B-00004602 7TL3241RL110 EAR. PWB ASSY 1
13 #N/A 780PS3006CA00 SCREW 2
14 #N/A 7024454014511 CTL KNOB 1
15 M-SCW-0824-6962 780PB3010CA01 SCREW 2
16 B-00004600 7TL3241RH110 CTL PWB ASSY 1
17 M-SCW-0824-6962 780PB3010CA01 SCREW 2
18 #N/A 7024503018011 SUPPORT 1
19 #N/A 780PB4012CB06 SCREW 5
20 #N/A 7024503017011 SUPPORT L.R 2
21 #N/A 780PS4008CB06 SCREW 4
22 #N/A 7333063200502 TFT 1
23 #N/A 7024503016911 SUPPORT TOP/BOTTOM 2
24 M-SCW-0824-6962 780PB3010CA01 SCREW 18
25 #N/A 780PS4008CB06 SCREW 4
26 #N/A 7024503016811 SUPPORT MAIN 1
27 M-SCW-0824-6962 780PB3010CA01 SCREW 16
28 #N/A 7024513006411 SHIELD POWER PWB 1
29 #N/A 780XX40002211 SCREW 4
30 #N/A 7TL3241PA110 POWER PWB ASSY 1
31 #N/A 780PS3006CA00 SCREW 4
32 #N/A 7024504022711 SUPPORT AC 1
33 M-SCW-0824-6962 780PB3010CA01 SCREW 2
34 #N/A 737420500290G AC SOCAT 1
35 #N/A 780XX40002711 SCREW 2
36 #N/A 7TL3241PF110 MAIN PWB ASSY 1
37 #N/A 780PS3006CA00 SCREW 10
38 #N/A 7024503018211 SUPPORT JACK 1
39 #N/A 780XX40002211 SCREW 3
40 M-SCW-0824-6962 780PB3010CA01 SCREW 8
41 #N/A 7024513005211 SHIELD MAIN PWB 1
42 #N/A 780XX40002211 SCREW 12
43 M-SCW-0824-6962 780PB3010CA01 SCREW 3
44 #N/A 7024413057411 DÉCOR PLATE 1
45 C-00004609 7024313003111 BACK COVER 1
46 #N/A 780PB4012CB07 SCREW 13
47 #N/A 780PS4008CB06 SCREW 2
48 #N/A 7024614016111 DÉCOR SHEET 1
49 #N/A 7024413057211 DÉCOR PLATE TN 1
50 #N/A 7024764052111 LABEL MODEL 1
51 #N/A 7024764041211 LABEL CAUTION 1
52 #N/A 7024413056911 DÉCOR PLATE JACK 1
53 #N/A 7024413056511 DÉCOR PLATE WIRE 1
54 PL-00004616 7024404012711 WIRE CLIP 1
55 #N/A 780PB4012CB07 SCREW 1
56 #N/A 7024413056411 DÉCOR PLATE HENGE 1
57 M-SCW-0824-6963 780PS4012CB08 SCREW 2
58 #N/A 7024503017111 SUPPORT HENGE 1
59 #N/A 780PB4012CB08 SCREW 6
60 C-00004610 7024403012011 BOTTOM BASE 1
61 #N/A 7024503017211 BASE SUPPORT SHEET 1
62 HW-00003604 780XX40002311 SCREW 6
63 #N/A 780XX40002011 SCREW 6
64 #N/A 7024614014311 PAD 6
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
19
ViewSonic Corporation Confidential - Do Not Copy N3260w/N3760w/N4060w
20
EXPLODED PARTS LIST (N3760w-1E)
ViewSonic Model Number: VS10848-1E
Rev: 1a
Serial No. Prefix: PVF
Item ViewSonic P/N Ref. P/N Description Q'ty
1 C-00004626 7024303007611 FRONT PANEL 1
2 #N/A 7024734022211 NAME PLATE 1
3 #N/A 735527000010G SPK 2
4 #N/A 780PB4010CB06 SCREW 8
5 #N/A 735512000060G SPK 2
6 M-SCW-0824-6962 780PB3010CA01 SCREW 4
7 #N/A 7024414026311 DÉCOR PLATE RM 1
8 B-00004621 7TL3741RN110 LED PWB ASSY 1
9 M-SCW-0824-6962 780PB3010CA01 SCREW 2
10 #N/A 7024503018111 SUPPORT EAR. PWB 1
11 M-SCW-0824-6962 780PB3010CA01 SCREW 2
12 B-00004620 7TL3741RL110 EAR. PWB ASSY 1
13 #N/A 780PS3006CA00 SCREW 2
14 #N/A 7024454014511 CTL KNOB 1
15 M-SCW-0824-6962 780PB3010CA01 SCREW 2
16 B-00004619 7TL3741RH110 CTL PWB ASSY 1
17 M-SCW-0824-6962 780PB3010CA01 SCREW 2
18 #N/A 7024503017911 SUPPORT 1
19 #N/A 780PB4012CB06 SCREW 5
20 #N/A 7333063700102 TFT 1
21 #N/A 7024503017411 SUPPORT MAIN (M) 1
22 M-SCW-0824-6962 780PB3010CA01 SCREW 6
23 #N/A 7024504022711 SUPPORT AC 1
24 M-SCW-0824-6962 780PB3010CA01 SCREW 2
25 #N/A 737420500310G AC SOCAT 1
26 #N/A 780XX40002711 SCREW 2
27 #N/A 780PS4008CB06 SCREW 8
28 #N/A 7024503017611 SUPPORT MAIN (R ) 1
29 M-SCW-0824-6962 780PB3010CA01