Text preview for : SAMSUNG DIGIMAX S630 S730.PDF part of Samsung S630/S730 Service Manual
Back to : SAMSUNG DIGIMAX S630 S730 | Home
CONTENTS
. SPECIFICATION
1. CAMERA SPECIFICATION ................................................................................................ 4 2. SYSTEM REQUIREMENTS ................................................................................................ 7 3. LCD monitor indicator ......................................................................................................... 8 4. CONNECTION DIAGRAM ................................................................................................ 11 5. IDENTIFICATION OF FEATURES ....................................................................................... 12
. EXPLODED VIEW AND PARTS LIST
1. MAIN ASSEMBLY............................................................................................................ 14 2. BODY ASSEMBLY ......................................................................................................... 16 3. BARREL ASSEMBLY ...................................................................................................... 20 4. BARREL ASSEMBLY ...................................................................................................... 24 5. FRONT COVER ASSEMBLY ............................................................................................. 26 6. MIDDLE COVER ASSEMBLY ............................................................................................. 28 7. BACK COVER ASSEMBLY ................................................................................................ 30 8. PACKING ITEM............................................................................................................... 32
. ADJUSTMENT
1. FIRMWARE .................................................................................................................. 36 2. ADJUSTMENT CAUTION ................................................................................................ 47
. PATTERN DIAGRAM
1. PARTS ARRANGEMENT FOR EACH PCB ASS' Y
1) MAIN_TOP_S3-63
......................................................................................................... 73 74 75 77 78 79 81
2) MAIN_BOTTOM_S3-63 ...................................................................................................... 3) CCD_TOP_S3-63 ............................................................................................................ 4) CCD_BOTTOM_S3-63
...................................................................................................... 76
5) MAIN_BOTTOM_S3-73 ...................................................................................................... 6) MAIN_BOTTOM_S3-73 ...................................................................................................... 7) CCD_TOP_S3-73 ............................................................................................................ 8) CCD_BOTTOM_S3-73
...................................................................................................... 80 ....................................................................................... 82
9) STROBO_TOP_S3-63/S3-73 ................................................................................................ 10) STROBO_BOTTOM_S3-63/S3-73 11) MODE_TOP_S3-63/S3-73
................................................................................................ 83 .......................................................................................... 84
12) MODE_BOTTOM_S3-63/S3-73
2
. CIRCUIT DIAGRAM
1) MAIN_S3-63 ..................................................................................................................
85
2) MAIN_DDR_S3-63 ............................................................................................................ 86 3) MAIN_CCD_S3-63 ............................................................................................................ 87 4) MAIN_I/O LCD_S3-63......................................................................................................... 88 5) MAIN_KEY_S3-63
............................................................................................................ 89 ...................................................................................................... 91 ...................................................................................................... 92
6) MAIN_LENS(MOTOR)_S3-63 ................................................................................................ 90 7) MAIN_POWER_S3-63 8) MAIN_STROBO_S3-63 9) MAIN_S3-73
.................................................................................................................. 93 ......................................................................................................... 94 ......................................................................................................... 95 ...................................................................................................... 96 ............................................................................................. 98 ......................................................................................................... 97 ...................................................................................................... 99 ................................................................................................... 100 ................................................................................................... 101 ................................................................................................ 102
10) MAIN_DDR_S3-73 11) MAIN_CCD_S3-73
12) MAIN_I/O LCD_S3-73 13) MAIN_KEY_S3-73
14) MAIN_LENS(MOTOR)_S3-73 15) MAIN_POWER_S3-73 16) MAIN_STROBO_S3-73 17) STROBO_S3-63/S3-73
18) MODE_KEY_S3-63/S3-73
. SERVICE INFORMATION ................................................................................................103
3
. SPECIFICATION
1. CAMERA SPECIFICATION
Image Sensor - Type : 1/2.5" CCD - Effective Pixel : ·S730-Approx. 7.2 Mega-pixel ·S630-Approx. 6.0 Mega-pixel - Total Pixel : ·S730-Approx. 7.4 Mega-pixel ·S630-Approx. 6.1 Mega-pixel Lens - Focal Length : SHD Lens f = 5.8 ~ 17.4mm (35mm film equivalent : 35~105mm) - F No. : F2.8~F7.1 (wide), F4.9~F12.4 (Tele) - Digital Zoom :·Still Image mode : 1.0X ~ 5.0X ·Play mode : S730: 1.0X ~ 12.0X (depends on image size) S630: 1.0X ~ 11.0X (depends on image size) - 2.5" color TFT LCD (S730:230K dots, S630:150K dots) Focusing - Type : TTL auto focus - Range Normal Wide Tele Shutter Exposure 80cm ~ infinity Macro 5 ~ 80cm 40 ~ 80cm Auto Macro 40cm ~ infinity 40cm ~ infinity
LCD Monitor
- Shutter Speed : 1 ~ 1/1,500 sec. (Manual : 8 ~ 1/1,500 sec.) - Control : Program AE - Metering : Multi, Spot - Compensation : ±2EV(1/3EV steps) - ISO Equivalent : S730-Auto, 80, 100, 200, 400, 800, 1000 S630-Auto, 80, 100, 200, 400 - Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off - Range : Wide : 0.2m ~ 3.0m Tele : 0.4m ~ 2.5m (ISO AUTO) - Recharging Time : Approx. 5 sec. - Soft+, Soft, Normal, Vivid, Vivid+
Flash
Sharpness
Color Effect - Normal, B&W, Sepia, Red, Green, Blue, Negative, User Set White Balance - Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Voice Recording - Voice Recording (max.10 hour) - Voice Memo in Still Image (max. 10 sec.) Date Imprinting - Date, Date & Time, Off (user selectable)
4
. SPECIFICATION
Shooting
- Still Image : ·Modes : Auto, Program, ASR, M, Scene ·Scene : Night, Portrait, Landscape, Text, Children, Close-up, Sunset, Dawn, Backlight, Fireworks, Beach & Snow ·Shooting : Single, Continuous, AEB, Wise Shot (S730 only) ·Self-timer : 2 sec.,10 sec., Double (10 sec., 2 sec.) - Movie Clip : ·With Audio or without Audio (user selectable, recording time : memory capacity dependent) The maximum file size of continuous movie clip is 2GB. ·Size : 640X480, 320X240 ·Frame rate : 30 fps, 15 fps ·Optical zoom: Max. 3X ·Internal memory : Approx.16MB flash memory ·External memory : SDHC / MMC / SD card (Up to 4GB Guaranteed) - File Format : ·Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0 ·Movie Clip : AVI (MJPEG) ·Audio : WAV - Media : - Image Size ·S730 3072X2304 3072X2048 3072X1728 2592X1944 2048X1536 ·S630 2816X2112 2784X1856 2816X1584 2048X1536 1024X768 - Capacity (256 MB MMC) ·S730 Super Fine Fine Normal ·S630 Super Fine Fine Normal 80 157 223 95 183 269 124 233 306 150 284 400 558 710 822 67 128 197 80 157 223 95 183 269 95 183 269 150 284 400 558 710 822 1024X768
Storage
These figures are measured under Samsung' standard conditions and may vary depending on s shooting conditions and camera settings.
5
. SPECIFICATION
"E" " Button
- Effect : Color, Image Adjust, Fun (Highlight, Composite ,Photo Frame) - Editing : Resize, Rotate, Color, Special Color, Image Adjust (Brightness, Contrast, Saturation, Add Noise), Fun (Cartoon, Highlight, Composite, Photo Frame, Sticker) - Single image, Thumbnails, Slide show, Movie Clip - Digital output connector : USB 2.0 High Speed - Audio : Mono - Video output : NTSC, PAL (user selectable)
Image Play Interface
Power Source - Primary Battery : 2 x AA Alkaline - Rechargeable battery (0ptional) : SNB-2512B KIT (2xAA 2500mAh Ni-MH Battery & Charger) Included battery may vary depending on sales region. Dimensions (WxHxD) - 99.8x 62.8x25.7mm (excluding protrusions) Weight - Approx. 136g (without batteries and card)
Operating Temperature - 0 ~ 40° C Operating Humidity - 5 ~ 85% Software - Camera Driver : Storage Driver : (Windows98/98SE/2000/ME/XP, Mac OS 9.2 ~ 10.3) - Special Features : Digimax Master, Adobe Reader
6
. SPECIFICATION
2. System Requirements
For Windows PC with processor better than Pentium II 450MHz
For Macintosh Power Mac G3 or later
(Pentium 700MHz recommended) Windows 98/98SE/2000/ME/XP Minimum 64MB RAM 200MB of available hard disk space USB port CD-ROM drive 1024x768 pixels, 16bit color display compatible monitor (24bit color display recommended) MicroSoft DirectX 9.0C Mac OS 9.2~10.3 Minimum 64MB RAM 110MB of available hard-disk space USB port CD-ROM drive
7
. SPECIFICATION
3. LCD monitor indicator
Recording mode
[ Image & Full Status ]
8
. SPECIFICATION
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 ISO
Description Recording mode Aperture Value/ Shutter Speed Flash/ Without Sound Self-timer Macro Contrast Sharpness Auto focus frame Camera shake warning Date/ Time Exposure compensation White Balance S730 S630 S730
Icons
F2.8, 1/30
2007/01/01 01:00 PM
14 15 16 17 18 19 20 21
Continuous shot S630 Metering Image quality S730 Image size S630 Battery Optical/ Digital Zoom bar / Digital Zoom rate Voice memo Number of available shots remaining Movie / Voice recording time 6 00:00:00
22
Card inserted indicator
9
. SPECIFICATION
Play mode
ISO AV TV FLASH SIZE DATE
80 F2.8 1/250 OFF 3072X2304 2007/01/01
No. 1 2 3 4 5 6 7 8 9 10 11 12 13
Description Play mode icon Voice Memo Protect DPOF Recording date Image size Flash Shutter speed Aperture value ISO Battery Folder name & File name Memory card indicator
Icon
2007/01/01 3072X2304 ~ 256X192 ON/OFF 1 ~ 1/1500 F2.8 ~ F12.4 80 ~ 1000
100-0031
10
. SPECIFICATION
4. CONNECTION DIAGRAM
SD Card
USB Cable
Card Reader
AV Cable
Lap top
IBM / MAC
TV Monitor
11
AC Adaptor
. SPECIFICATION
5. IDENTIFICATION OF FEATURES Front & Top
Mode dial Power button Shutter button Flash Self-timer lamp / Auto focus lamp USB / AV connection terminal Lens / Lens cover DC input connection port Speaker
Microphone
Back & Bottom
Camera status lamp Zoom T button (Digital zoom) Zoom W button (Thumbnail) E (Effects) button LCD monitor Strap eyelet
Tripod socket
5 function button + / - button, Delete button Play mode / Printer button
12
. SPECIFICATION
Bottom/ 5-function button
Battery chamber cover
Memory card slot Battery chamber
Voice memo/ Voice Recording/ Up button Menu/ OK button
Flash/ Left button
Self-timer/ Right button
Macro/ Down button Play & Pause button
13
. EXPLODED VIEW AND PART LIST
1. MAIN ASSEMBLY
1-2
1-1
1-2
1-2
1-2
14
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
Q7304000201A Q7304000201B 1-1 Q7304000201C Q7304000201D Q7304000201E 1-2 Q6003001602A
DC_USB_COVER DC_USB_COVER DC_USB_COVER DC_USB_COVER DC_USB_COVER SC_1745
1 1 1 1 1 6
O O O O O X
BLACK SILVER RED PINK GREEN
15
. EXPLODED VIEW AND PART LIST
2. BODY ASSEMBLY
2-37
2-38 2-36
2-33
2-32
2-35
2-20 2-21 2-22 2-24 2-23
2-19
2-29 2-26
2-1 2-40
2-34
2-30
2-28
2-18 2-27 2-25
2-2
2-31
2-7
2-11 2-29 2-10
2-12
2-15 2-17
2-6
2-17
2-8
2-5
2-16
2-4
2-14
2-13
2-3 2-39
2-17
16
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
2-1 2-2
Q7211086901A Q7011055601A Q9007278001A Q9007278001B
BATTERY_CHAMBER BATTERY_CONTACT BATTERY_COVER_ASSY BATTERY_COVER_ASSY BATTERY_COVER_ASSY BATTERY_COVER_ASSY BATTERY_COVER_ASSY BATTERY_COVER BATTERY_CONTACT_C BATTERY_PLATE BATTERY_EP_PLATE BATTERY_HINGE BATTERY_HINGE SPRING BARREL_BLACK BARREL_SILVER IR CUT FILTER OLPF CUSHION_S630 OLPF CUSHION_S730 CCD FPCB ASSY_S630 CCD FPCB ASSY_S730 CCD_PLATE_S630 CCD_PLATE_S730 CCD_FPCB_S630 CCD_FPCB_S730 CCD_S630 CCD_S730 SC_1435 STROBO_ASSY
1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 7 1
O O O O O O O X X X X O O O O O O O O O O O X X O O X O BLACK SILVER RED PINK GREEN
2-3
Q9007278001C Q9007278001D Q9007278001E
2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18
Q7217394501A Q7011055701A Q7017055101A Q7217368403A Q7004002501A Q6107074501A Q9002161801A Q9002146501B Q2904004301A Q7309048601A Q7309048602B Q9008099402A Q9008116401A Q7111002601A Q7101002901A Q4102005401A Q4102015101A Q0604007301A Q0604006901A Q0961900301A Q9004008901A
17
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
2-19 2-20 2-21 2-22 2-23 2-24 2-25 2-26 2-27 2-28 2-29 2-30 2-31
Q7211087001A Q7309048001A Q7011056002A Q7014004801A Q0611003101A Q7214090701A Q9008113701A Q4102014801A Q2401008501A Q0408001101A Q6003027501A Q6003027501A Q3003001201A
REFLECTOR_HOLDER XE_TUBE_RUBBER TRIG_CONTACT GM_REFLECTOR_D3 REF_XE_TUBE_D3 FRESNEL LENS STROBO_FPCB_ASSY STROBO_FPCB MAIN_CONDENCER AF_LED_LAMP SC_1435 SC_1435 MIC
1 1 1 1 1 1 1 1 1 1 1 1 1
X X X X X X O X O O X X O
18
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
2-32 2-33 2-34 2-35 2-36 2-37 2-38 2-39 2-40
Q7011058901A Q7409295901A Q7409261901A Q9008116801A Q9008113301A Q7011061701A Q7011059001A Q9761174007 Q0704014101A Q0704013601A Q7012094701A Q7012087203A Q9004089301A
DC_USB_PLATE DC_USB_SHIELD_FORM TOP_PLATE_SHIELD_FORM MAIN_PCB_S630 MAIN_PCB_S730 LCD_FRAME_S630 LCD_FRAME_S730 SC_1740 LCD_S630 LCD_S730 FRONT_DECORING_BLACK FRONT_DECORING_SILVER REFLECTOR_ASSY
1 1 1 1 1 1 1 5 1 1 1 1 1
O X X O O O O X O O O O O
19
. EXPLODED VIEW AND PART LIST
3. BARREL ASSEMBLY
3-42 3-9
3-41 3-13
3-14
3-40 3-12
3-23
3-24 3-25
3-1 3-7 3-2 3-15 3-8 3-4 3-18 3-17 3-10 3-16
3-19
3-20
3-24
3-21 3-22 3-6
3-11
3-24
3-26
3-3 3-36
3-37
3-5 3-35 3-34
3-33
3-32
3-31
3-28
3-30 3-29
3-38 3-27 3-39
20
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
3-1 3-2 3-3 3-4 3-5 3-6 3-7 3-8 3-9 3-10 3-11 3-12 3-13 3-14 3-15 3-16 3-17 3-18 3-19 3-20
Q7012083901B Q9002138701A Q7012084602A Q7411119702A Q7411119801A Q9002137701A Q7012085702A Q7212187405A Q3107002401A Q7212187803A Q9611142007A Q0608001001A Q4101033601A Q0961900101A Q7212187901A Q7212188001A Q7212188101A Q7212188201A Q7212187702A Q6003000201A
AF CLIP 3rd LENS ASS'Y AF GUIDE HOLDER AF GUIDE BAR-A AF GUIDE BAR-B AF MOTOR ASS'Y AF CLIP HOLDER LENS BASE ZOOM MOTOR ZOOM MOTOR GEAR SCREW PHOTO INTERRUPTER ZOOM MOTOR PCB SCREW ZOOM GEAR-A ZOOM GEAR-B ZOOM GEAR-C ZOOM GEAR-D ZOOM COVER SCREW
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3
O O O O O O O O O O X O O X O O O O O X
21
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
3-21 3-22 3-23 3-24 3-25 3-26 3-27 3-28 3-29 3-30 3-31
Q0608001001A Q0608000701A Q4101035001A Q0961900301A Q6003000201A Q0994913101A Q7012094401A Q7012086105A Q0961900101A Q7411119604A Q9002139001A Q9005018002A
PHOTO INTERRUPTER PHOTO REFLECTOR MAIN F PCB SCREW SCREW SCREW SUS CAM DECORING_BLACK SUS CAM DECORING_SILVER SCREW 2nd MOVE PIN 2nd LENS ASSY SHUTTER ASSY
1 1 1 3 1 1 1 1 1 3 1 1
O O O X X X O O X O O O
22
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
3-32 3-33 3-34 3-35 3-36 3-37 3-38 3-39 3-40 3-41 3-42
Q7012083802A Q7411120101A Q7212201601A Q7212191102A Q7212187001A Q7212187302A Q7212187202A Q9002161201A Q9002147001A Q7411119504A Q9008095201A Q9008086201A Q9002146601A
F-PCB GUIDE OCB PIN CAM BARREL_BLACK CAM BARREL_SILVER GUIDE PLATE OUTER GUIDE BARREL OUTER CAM BARREL 1st LENS ASSY_BLACK 1st LENS ASSY_SILVER 1st MOVE PIN MAIN FPCB ASSY ZOOM MOTOR F PCB ASS LENS BASE ASSY
1 3 1 1 1 1 1 1 1 3 1 1 1
O O O O O O O O O O O O O
23
. EXPLODED VIEW AND PART LIST
4. BARREL ASSEMBLY
4-5 4-8 4-3
4-2
4-4
4-1 4-6
4-2
4-7
24
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8
Q7212191201A Q6107064103A Q7212187601A Q7012084201A Q9002139601A Q6107064202A Q6003047001A Q9002146701A
FRONT PANEL BARRIER CLOSE SPRING BARRIER-A BARRIER BASE BARRIER LEVER ASS'Y BARRIER OPEN SPRING BARRIER SCREW BARRIER ASSY
1 2 2 1 1 1 2 1
O O O O O O X O
25
. EXPLODED VIEW AND PART LIST
5. FRONT COVER ASSEMBLY
5-13
5-8
5-7
5-6
5-5 5-9
5-3 5-1
5-4
5-12
5-10
5-2 5-11
26
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
5-1 5-2 5-3 5-4 5-5 5-6 5-7 5-8 5-9 5-10 5-11 5-12
Q7217395801A Q7217393601A Q7117017401A Q7217372502A Q7217395701A Q7409261801A Q7217396701A Q6107070901A Q7217395201A Q7409111601A Q7211059101A Q6003001602A Q7017052401A Q9007279501A Q9007279501B Q9007279501E Q9007279501F Q9007279501G Q9007279501C
FRONT_COVER_S630 FRONT_COVER_S730 FRONT_DECO AF_LED_WINDOW GRIP_DECO RELEASE_DECO_TAPE RELEASE_DECO RELEASE_SPRING RELEASE_BUTTON RELEASE_WASHER TRIPOD_CONNECTOR SC_1745 LOGO_PLATE FRONT_COVER_SUB_ASSY_S630 FRONT_COVER_SUB_ASSY_S630 FRONT_COVER_SUB_ASSY_S630 FRONT_COVER_SUB_ASSY_S630 FRONT_COVER_SUB_ASSY_S630 FRONT_COVER_SUB_ASSY_KENOX_S630 FRONT_COVER_SUB_ASSY_KENOX_S630 FRONT_COVER_SUB_ASSY_S730 FRONT_COVER_SUB_ASSY_S730 FRONT_COVER_SUB_ASSY_KENOX_S730 FRONT_COVER_SUB_ASSY_KENOX_S730 FRONT_COVER_SUB_ASSY_S730 FRONT_COVER_SUB_ASSY_S730
1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1
X X X X X X X X X X O X X O O O O O O O O O O O O O BLACK SILVER RED PINK GREEN BLACK SILVER BLACK SILVER BLACK SILVER RED PINK
5-13
Q9007279501D Q9007279001A Q9007279001B Q9007279001C Q9007279001D Q9007279001E Q9007279001F
27
. EXPLODED VIEW AND PART LIST
6. MIDDLE COVER ASSEMBLY
6-4
6-3
6-10
6-5 6-2
6-6
6-1
6-7
6-11 6-12
6-8
6-9
28
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
Q7217393901A 6-1 Q7217393901B Q7217393901C Q7217395001A 6-2 6-3 6-4 6-5 6-6 6-7 6-8 6-9 6-10 6-11 6-12 Q7217395001B Q7217395001C Q7017039003A Q7217394701A Q7217394702B Q7217394701C Q9007272001A Q9761173007A Q9008113401A Q7011059101A Q0961900301A Q7217395101A Q3001001302A Q9007278201A
MIDDLE_COVER MIDDLE_COVER MIDDLE_COVER POWER_BUTTON POWER_BUTTON POWER_BUTTON MODE_CLICK_SPRING MODE_DIAL MODE_DIAL MODE_DIAL MODE_CONTACT_ASSY_SL73 SC_1730 MODE_FPCB_ASSY TOP_KEY_PLATE SC_1430 STRAP_INNER_HOLDER SPEAKER TOP_KEY_ASSY
1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1
O O O O O O O O O O O X X X X O O O
BLACK SILVER/RED PINK/GREEN BLACK SILVER/RED PINK/GREEN BLACK SILVER/RED PINK/GREEN
29
. EXPLODED VIEW AND PART LIST
7. BACK COVER ASSMEBLY
7-8
7-1
7-3
7-6 7-5
7-4
7-3
7-7
7-2
30
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
7-1 7-2 7-3 7-4 7-5 7-6 7-7
Q7217397201A Q7217393701A Q7409275201A Q7409275302A Q7211087801A Q7217394901A Q7217394601A Q7304000301A Q9007279401A Q9007279401B Q9007279401C Q9007279401D
BACK_COVER_S630 BACK_COVER_S730 LCD_SPONGE_A LCD_SPONGE_B ZOOM_LEVER NAVI_KEY FUNCTION_BUTTON RUBBER_KEY_PLATE BACK_COVER_ASSY_S630 BACK_COVER_ASSY_S630 BACK_COVER_ASSY_S630 BACK_COVER_ASSY_S630 BACK_COVER_ASSY_S630 BACK_COVER_ASSY_S730 BACK_COVER_ASSY_S730 BACK_COVER_ASSY_S730 BACK_COVER_ASSY_S730
1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1
X X X X X X x O O O O O O O O O O BLACK SILVER RED PINK GREEN BLACK SILVER RED PINK
7-8
Q9007279401E Q9007277901A Q9007277901B Q9007277901C Q9007277901D
31
. EXPLODED VIEW AND PART LIST
8. PACKING ITEM
8-4 8-12 8-13
8-14 8-19 8-16 8-1
8-17 8-7
8-18
8-6 8-3
8-5
8-8 8-9 8-10 8-15
8-2 8-11
32
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
8-1 8-2 8-3 8-4 8-5 8-6 8-7
QP960210101A Q6909018202A Q6901258701A Q6901258401A Q7409271401A Q4609017401A Q6909019801A Q6904031201A Q6904031301A Q6806358201A Q6806363901A Q6806364001A Q6806364101A Q6806364201A Q6806364301A
PE BAG (FOR CAMERA) PE BAG (FOR ACCESSORY) PULP_MOLD_Digimax_EXP PULP_MOLD_KENOX_KOR STRAP_KENOX_S730_KOR/EXP DRIVER + DIGIMAX MASTER_S3-73 AIR BAG_Samsung_S730(FOR BODY) POUCH_S3-73_KOR_EXP_BLACK POUCH_S3-73_KOR_EXP_SILVER U_MANUAL_KENOX_S730_S630_KOR U_MANUAL_Samsung_S730_ENG U_MANUAL_Samsung_S730_GER U_MANUAL_Samsung_S730_FRA U_MANUAL_Samsung_S730_SPA U_MANUAL_Samsung_S730_ITA U_MANUAL_Samsung_S730_CHI(T) U_MANUAL_Samsung_S730_DUT U_MANUAL_Samsung_S730_POR U_MANUAL_Samsung_S730_SWE U_MANUAL_Samsung_S730_DEN U_MANUAL_Samsung_S730_FIN U_MANUAL_Samsung_S730_RUS
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
O O O O O O O O O O O O O O O O O O O O O O
8-8
Q6806364401A Q6806364501A Q6806364601A Q6806364701A Q6806364801A Q6806364901A Q6806365001A
33
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
Q6806365101A Q6806365201A 8-8 Q6806365301A Q6806365401A Q6806365501A Q6806377701A Q6806365601A 8-9 Q6806365701A Q6806365801A Q6806377801A QP955150101F Q6807012301A Q6807010903C 8-10 Q6807011301B Q6807009502E Q6807012101A Q6807012401A Q6901260701A Q6901260801A 8-11 Q6901260901A Q6901256301A Q6901256401A Q6901256501A
U_MANUAL_Samsung_S730_CHI(S) U_MANUAL_Samsung_S730_TK U_MANUAL_Samsung_S730_IND U_MANUAL_Samsung_S730_ARA U_MANUAL_Samsung_S730_THA QS_MANUAL_KENOX_S730_S630 QS/MANUAL_Samsung_S730_E/G/F/SP/I/DU/P_7 QS/MANUAL_Samsung_S730_E/G/FI/SW/DA/RU_6 QS/MANUAL_Samsung_S730_E/TU/CH/IN/AR_TH_6 QS_MANUAL_Samsung_S730_EN_SP_FR WARRANTY CARD_KOREA WARRANTY CARD_2 YERARS WARRANTY CARD_RUS(3 YEARS) WARRANTY CARD_TSOE(CHINA) CARD_PRODUCT(Mexico) WARRANTY CARD_IRAN WARRANTY CARD_TURKEY G/T BOX_KENOX_S630_Ni-MH(SNB-2512)_Silver G/T BOX_S630_EXP_AUS_ALKALINE_Silver G/T BOX_S630_USA_CAN_ALKALINE_Silver G/T BOX_KENOX_S730_Ni-MH(SNB-2512)_Silver G/T BOX_S730_EXP_AUS_ALKALINE_Silver G/T BOX_S730_USA_CAN_ALKALINE_Silver
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
O O O O O O O O O O O O O O O O O O O O O O O
34
. EXPLODED VIEW AND PART LIST
PARTS LIST
Fig.No Parts No. Parts Name Q'ty Supply Available Parts Remarks
8-12 8-13 8-14 8-15 8-16 8-17 8-18
Q4301001801A Q4302000901A Q4309002301A Q6806368001A Q6806378101A Q3801003001A Q3801003701A Q3802006601A Q3802006801A Q3802006701A Q7409276601A Q7409266001A Q7409276901A
ALKALINE (1.5V, AA) 2EA - DURACEL ULTRA BATTERY_SNB-2512(AA Type) Ni-MH CHARGER(SBC-N2) MANUAL_SNB-2512B KIT_KOR MANUAL_SNB-2512BKIT_CHI_S AC CODE CABLE_KOR-D1 AC CODE CABLE_TSOE-D1 USB CABLE_S730 AV CABLE_S630 AV CABLE_S730 MIC LABEL_KENOX S630(MADE IN CHINA) MIC LABEL_KENOX S730(MADE IN CHINA) FCC LABEL_Samsung_S630_EXP (MADE IN CHINA) FCC LABEL_Samsung_S630_EXP (MADE BY SAMSUNG) FCC LABEL_Samsung_S730_EXP (MADE IN KOREA) FCC LABEL_Samsung_S730_EXP (MADE IN CHINA) FCC LABEL_Samsung_S730_EXP (MADE BY SAMSUNG)
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
O O O O O O O O O O O O O O O O O
8-19
Q7409277001A Q7409266201A Q7409266301A Q7409266401A
35
. ADJUSTMENT
1. FIRMWARE
1) RESTING CAMERA
1. Turn on the Camera
2. Press and hold the Up button and Shutter button and then press the Power off.
3. Turn on the camera and check whether the camera is reset or not.
36
. ADJUSTMENT
2) CHECKING VERSION
1. Remove the memory card from the camera.
2. Turn on the camera.
3. Press the Up button twice to select the Voice Recording mode.
4. Press the 5 function button as following order. (Left button Right button UpÄbutton +/- button)
37
. ADJUSTMENT
5. Check the Firmware and turn off the camera.
38
. ADJUSTMENT
3) UPGRADING
1. Insert the SD card that has the firmware. * Updating the firmware will delete all data in the SD card. Be sure to download all data to your PC before updating the firmware. The firmware file name must be " STS373.elf " and use the AC adapter or fully charged battery.
2. Use the AC adapter or fully charged battery. To upgrade the Firmware, all of the battery level indicator on the LCD monitor must be displayed.
3. Turn on the camera.
4. Press the Up button twice to select the Voice Recording mode.
39
. ADJUSTMENT
5. Press the 5 function button as following order. (Left button Right button Up button +/- button)
6. 'UPGRADE (UP TYPE)' message will display and then the firmware will be upgraded.
7. After upgrading the firmware, the camera is turned off.
8. Turn on the camera and do the 'Reset' menu in the Setup menu.
40
. ADJUSTMENT
4) FULL VERSION OF FIRMWARE How to use the FULL firmware1
Camera Status : When turning on the camera, the power consumption (Checking the POWER SUPPLY) is 200-300mA and the camera cant be operated. Cause Solution Additions : The data of 0 address in the FLASH MEMORY of the MAIN PCB is damaged. : Recover the address by doing the FULL VERSION FIRMWARE shown below. : After completing the upgrading of the FULL VERSION FIRMWARE, do the LENS SHADING and CCD DEFECT CELL adjustment.
1. Short the 3 point of the MAIN PCB as shown.
2. Assemble the camera correctly and insert the SD card that has the Full version of firmware.
3. Turn on the camera by using the Power Supply. To connect the camera and Power Supply, use the Battery Tool.
4. If the Current is up to 200mA and down to 0 on the POWER SUPPLY display, the upgrade is complete.
41
. ADJUSTMENT
How to use the FULL firmware2
Depending on the camera status, do the full version upgrade.
Reference : - Delete all data in the memory card and upgrade with this firmware. - When using the full version upgrade, back up the script file as the files will be deleted by the upgrade. - If the full version upgrade is done by the following way, the script files are saved on the SD card. To upload the script files, do not remove the SD card and refer to instructions listed below. - If there are LSCLUT0.BIN, DefectivePixel0.bin, DefectivePixel1.bin files on the SD card, the back up was complete.
1. Insert the SD card that has the Full version of firmware. * The firmware file name must be " STS373_full.elf "
2. Use the AC adaptor or fully charged battery. To upgrade the Firmware, all of the battery level indicator on the LCD monitor must be displayed.
3. Turn on the Camera.
4. Press the Up button twice to select the Voice Recording mode.
42
. ADJUSTMENT
5. Press the 5 function button as following order. (Left button Right button Down button +/- button)
43
. ADJUSTMENT
6. 'UPGRADING!' message will display and then the firmware will be upgraded.
44
. ADJUSTMENT
- After completing the upgrading,Äback upÄfiles will be made on the SD memory card. Backup file names areÄLSCLUT0.BIN, DefectivePixel0.bin and DefectivePixel1.bin .
7. After upgrading the Full version firmware, upload the script files. Turn on the camera and press the Up button twice to select the Voice Recording mode. Press the 5 function button as following order : Tele button Wide button Down button OK button.
45
. ADJUSTMENT
8. The following message will display and the upgrading is complete.
9. Turn off the camera.
46
. ADJUSTMENT
2. ADJUSTMENT CAUTION
1) Basic Information of Adjustment
After changing the electronic parts of S730, the parts have to be adjusted in accordance withe the adjusted items. The items listed on the table are have to be adjusted after changing.
1> To adjust the camera after changing the electronic parts, see the below table. MAIN PCB POWER PCB BARREL ASS' Y CCD ASS' Y
FIRMWARE UPGRADE PUNT ADJ. SHUTTER CLOSE TIME ADJ. BACK LASH ADJ. FLASH ADJ. BATTERY LEVEL ADJ. OB SETTING BURNING TEST & CCD DEFECT CELL EEPROM READ EEPROM WRITE
2> Equipment Equipments - AE TESTER : AE TESET can test up to LV 16.7. - POWER SUPPLY : 3.3V / 2A Chart - Focus Chart - Gray Chart(31%..Reflection Paper)
47
. ADJUSTMENT
3> Adjustment program file To adjust all items, all kinds of code by items have to be inserted in program file and saved them to the SD card as TXT file type. The codes are listed below.
< Description of TXT file > Use the Memo pad of Basic Windows program and save it as Ä"STS373ADJ.txt"
// PM Batch Test 8-process //
// adj control adj_control check_process_id 65535 adj_control set_process_id 65534 adj_control save_e2prom 1 // save eeprom adj_control save_data_file 1 // save csv... adj_control save_process_pass 1 adj_control batch 1 // enable 8 adj... adj_control osd_delay 0 // OSD Disable adj_control signal 500// start signal //adj_control signal 300// start signal //adj_control signal 300// start signal
//======================================#1. OB(63 OB ADJ SKIP) delay 5 mode program adj_ob preview_agc 96 adj_ob preview_target_rgb 0 0 0 adj_ob preview_luma_min_max 150 4000 adj_ob capture_agc 96 adj_ob capture_target_rgb 0 0 0 adj_ob capture_luma_min_max 150 4000 adj_ob run delay 5 //adj_control signal 100// start signal
48
. ADJUSTMENT
//======================================#2.LSC //mode program //adj_lens_shading repeat_num 1 adj_lens_shading ng_repeat 3 adj_lens_shading lut_load_percent 80 adj_lens_shading before_capture_skip 1 adj_lens_shading luma_min_max 75 120 adj_lens_shading run delay 10 //adj_control signal 100
//======================================#3.Battery Level adj_battery base 100 300 adj_battery half_1 175 adj_battery low_1 169 adj_battery empty_1 165 adj_battery lock_1 161 adj_battery start_1 165 adj_battery half_2 175 adj_battery low_2 168 adj_battery empty_2 164 adj_battery lock_2 157 adj_battery start_2 165 adj_battery run
//======================================#4.BackLash mode program adj_backlash adj_count 2 adj_backlash max_backlash 70 adj_backlash run
//======================================#5.Shutter Closing mode program ae evc 12 adj_sh_close max_count 20 adj_sh_close init_linedelay 13 adj_sh_close init_subdelay 0 adj_sh_close gain_skip1 0 adj_sh_close gain_skip2 0 adj_sh_close gain_setlvalue 208 //0:enable //0:enable // 208/16=13Lv
49
. ADJUSTMENT
adj_sh_close gain_offset -5 //(5000K -> 3300K) adj_sh_close gain_adjustrange1 15 adj_sh_close gain_adjustrange2 15 adj_sh_close run delay 10 //adj_control signal 1500
//======================================#6.Strobe Mode program Ae metering 1 Ae iso 2 Ae evc 6 Ae preview_fnum 1 Ae preview_s_speed 058 Ae preview_gain 050 Ae lock Zoom wide Delay 20 adj_strobe_intensity param adj_strobe_intensity stage PV2 adj_strobe_intensity flash_table_test 0 adj_strobe_intensity level_test_number 2 adj_strobe_intensity pre_table_index 14 0 0 0 0 adj_strobe_intensity Standard_Luma 200 310 400 620 725 1110 adj_strobe_intensity awb_gain 474 620 272 360 adj_strobe_intensity run //Delay 20 //adj_control signal 4000 delay 5
=====================================================// Punt zoom close_to_open mode program coach idle ae metering 0 ae iso 0 ae evc 6 ae preview_fnum 1 set wb auto coach view delay 25 adj_control save_e2prom 1 adj_control save_data_file 1 adj_punt zoomstep 0 7
50
. ADJUSTMENT
adj_punt searching_min_short 80 80 80 80 90 90 50 50 adj_punt searching_max_short 160 160 160 160 165 170 170 170 adj_punt searching_min -7 31 23 21 27 29 18 32 adj_punt searching_max 245 248 240 238 244 246 235 230 adj_punt limit_min_short 85 85 85 85 95 95 55 55 adj_punt limit_max_short 155 155 155 155 160 165 165 165 adj_punt limit_min 13 51 43 41 47 49 38 52 adj_punt limit_max 225 228 220 218 224 226 215 210 adj_punt slop_min -100 -100 -90 -100 -130 -150 -170 adj_punt slop_max 60 80 100 120 140 160 180 adj_punt run //adj_control signal 0 delay 5
// Current Consumption mode program delay 20 zoom wide delay 30 zoom tele delay 20 mode playback delay 10 mode program //set reset poweroff zoom_close
//================================#1. Burnin Test adj_control check_process_id 65532 adj_control set_process_id 65528 adj_control save_e2prom 1 adj_control save_data_file 1 adj_control rePeat_CNT 20 adj_control override_tv_usb 1 adj_control do_check_process_id 1 //production check adj_burnin delete_all //adj_burnin format_keep adj_burnin prog_mode adj_burnin lcd_on
51
. ADJUSTMENT
adj_burnin flash_cap adj_burnin flash_off_cap adj_burnin norm_cap adj_burnin macro_cap adj_burnin selftimer_cap adj_burnin play_mode adj_burnin prog_mode adj_burnin avi_cap_5sec adj_burnin easy_mode adj_burnin aux_led_on adj_burnin wait_2sec adj_burnin aux_led_off adj_burnin burnin_end
//================================#2. CCD Defect Cell //start adj_defective_pixel //adj_control check_process_id 65535 //adj_control save_e2prom 1 //adj_control save_data_file 1
mode program //ae metering multi //ae iso 200 //ae ev 0 //ae iris 0 //awb wbal auto //coach view //delay 25 adj_defect integration adj_defect ref_level_short 800 adj_defect ref_level_long 3500 adj_defect exp_time 6 adj_defect defect_max_num1 30000 adj_defect defect_max_num2 30000 //adj_defect run //end adj_defect //delay 10 //poweroff zoom_close SD CARD SHOULD BE FORMATTED BEFORE USING.
52
. ADJUSTMENT
2) OB SETTING
After changing the MAIN PCB, adjust the black color.
< How to adjust > a...Download program and save it to SD memory card. b...Insert the SD memory card that has the program file and turn on the camera. c...Adjustment will be done automatically. d...After completing the adjustment, the camera is turned off automatically.
< Description of TXT file > When making or modifying the program, see the following program codes. When modify the program, use the Memo Pad of Windows and save it as "STS373ADJ.txt"
// PM Batch Test 8 //
// adj control adj_control check_process_id 65535 adj_control set_process_id 65534 adj_control save_e2prom 1 // save eeprom adj_control save_data_file 1 // save csv... adj_control save_process_pass 1 adj_control batch 1 // enable 8 adj... adj_control osd_delay 0 // OSD Disable adj_control signal 500// start signal //adj_control signal 300// start signal //adj_control signal 300// start signal
53
. ADJUSTMENT
//======================================#1. OB delay 5 mode program adj_ob preview_agc 96 adj_ob preview_target_rgb 0 0 0 adj_ob preview_luma_min_max 150 4000 adj_ob capture_agc 96 adj_ob capture_target_rgb 0 0 0 adj_ob capture_luma_min_max 150 4000 adj_ob run delay 5 //adj_control signal 100// start signal poweroff zoom_close
54
. ADJUSTMENT
3) LENS SHADING
The characteristic of Lens makes the outside of the image be dark. This phenomenon is called "Lens Shading". This adjustment is for compensating the brightness of the outside of the image. After calculating the darkness, this adjustment will increase the brightness of the outside of the image up to 80% of the center of the image.
[ Standards for the Adjustment ] - Specification of the tools : Light source that can block the external light source - Color temperature : 3200K±50 - Brightness : LV 8.2 ±0.1 (±0.05 recommended)
< How to adjust > a...Prepare AE TESTER can be test up toLV8.2. b...Download program file and save it to SD memory card. c...Insert the SD memory card that has the program file and attach the camera to the Light box. d...Attach the camera on the AE METER and set the LV as 8.2
55
. ADJUSTMENT
e...Turn on the camera. f...Adjustment will be done automatically. e...After completing the upgrade, the camera is turned off automatically.
< Description of TXT file > When making or modifying the program, see the following program codes. When modify the program, use the Memo Pad of Windows and save it as "STS373ADJ.txt"
// PM Batch Test 8 //
// adj control adj_control check_process_id 65535 adj_control set_process_id 65534 adj_control save_e2prom 1 // save eeprom adj_control save_data_file 1 // save csv... adj_control save_process_pass 1 adj_control batch 1 // enable 8 adj... adj_control osd_delay 0ÄÄÄÄÄ// OSD Disable adj_control signal 500// start signal //adj_control signal 300// start signal //adj_control signal 300// start signal //======================================#2.LSC //mode program //adj_lens_shading repeat_num 1 adj_lens_shading ng_repeat 3 adj_lens_shading lut_load_percent 80 adj_lens_shading before_capture_skip 1 adj_lens_shading luma_min_max 75 120 adj_lens_shading run delay 10 //adj_control signal 100 poweroff zoom_close
56
. ADJUSTMENT
4) B/T LEVEL ADJ
After changing the MAIN PCB, adjust WARNING LEVEL and LOCK LEVEL.
< How to adjust > a...Prepare the POWER..SUPPLY. b...Connect the camera to the POWER..SUPPLY. c...Set the voltage to 2.71V. d...Downloading the program file and save it to SD memory card. e...Insert the SD memory card and turn on the camera. f...The adjustment will be done automatically. There are no displays on the LCD. g...After completing the upgrade, the camera is turned off automatically.
< Description of TXT file > When making or modifying the program, see the following program codes. When modify the program, use the Memo Pad of Windows and save it as"STS373ADJ.txt"
/ PM Batch Test 8 //
// adj control adj_control check_process_id 65535 adj_control set_process_id 65534 adj_control save_e2prom 1 // save eeprom adj_control save_data_file 1 // save csv... adj_control save_process_pass 1 adj_control batch 1 // enable 8 adj... adj_control osd_delay 0 // OSD Disable adj_control signal 500// start signal //adj_control signal 300// start signal //adj_control signal 300// start signal
57
. ADJUSTMENT
//======================================#3.Battery Level adj_battery base 100 300 adj_battery half_1 175 adj_battery low_1 169 adj_battery empty_1 165 adj_battery lock_1 161 adj_battery start_1 165 adj_battery half_2 175 adj_battery low_2 168 adj_battery empty_2 164 adj_battery lock_2 157 adj_battery start_2 165 adj_battery run poweroff zoom_close
58
. ADJUSTMENT
5) BACK LASH ADJ
After changing the MAIN PCB, BARREL and CCD, adjust the BACK LASH.
< How to adjust > a...Download the Program file and save it to SD memory card. b...Insert the SD memory card that has program file and turn on the camera. c...Adjustment will be done automatically. d...After completing the upgrade, the camera is turned off automatically.
< Description of TXT file > When making or modifying the program, see the following program codes. When modify the program, use the Memo Pad of Windows and save it as"STS373ADJ.txt"
// PM Batch Test 8 //
// adj control adj_control check_process_id 65535 adj_control set_process_id 65534 adj_control save_e2prom 1 // save eeprom adj_control save_data_file 1 // save csv... adj_control save_process_pass 1 adj_control batch 1 // enable 8 adj... adj_control osd_delay 0 // OSD Disable adj_control signal 500// start signal //adj_control signal 300// start signal //adj_control signal 300// start signal //======================================#4.BackLash mode program adj_backlash adj_count 2 adj_backlash max_backlash 70 adj_backlash run poweroff zoom_close
59
. ADJUSTMENT
6) SHUTTER CLOSE TIME ADJ
After changing the MAIN PCB, BARREL and CCD, adjust the SHUTTER CLOSE TIME and CCD Gain.
[ Standards for the Adjustment ] - Specification of the tools : Light source that can block the external light source - Color temperature : 3200K ±50 - Brightness : LV 13 ±0.1 (±0.05 recommended)
< How to adjust > a...Prepare AE TESTER that can be test up to LV 13. b...Attach the camera to the AE TESTER.
c...Set the LV to 13. d...Download the program and save it to SD memory card. e...Insert the SD memory card that has the program file and turn on the camera. f... The adjustment will be done automatically. g... After completing the upgrade, the camera is turned off automatically.
60
. ADJUSTMENT
< Description of TXT file > When making or modifying the program, see the following program codes. When modify the program, use the Memo Pad of Windows and save it as"STS373ADJ.txt"
// PM Batch Test 8 //
// adj control adj_control check_process_id 65535 adj_control set_process_id 65534 adj_control save_e2prom 1 // save eeprom adj_control save_data_file 1 // save csv... adj_control save_process_pass 1 adj_control batch 1 // enable 8 adj... adj_control osd_delay 0 // OSD Disable adj_control signal 500// start signal //adj_control signal 300// start signal //adj_control signal 300// start signal
//======================================#5.Shutter Closing mode program ae evc 12 adj_sh_close max_count 20 adj_sh_close init_linedelay 13 adj_sh_close init_subdelay 0 adj_sh_close gain_skip1 0 //0:enable adj_sh_close gain_skip2 0 //0:enable adj_sh_close gain_setlvalue 208 // 208/16=13Lv adj_sh_close gain_offset -5 // (5000K -> 3300K) adj_sh_close gain_adjustrange1 15 adj_sh_close gain_adjustrange2 15 adj_sh_close run delay 10 //adj_control signal 1500 poweroff zoom_close
61
. ADJUSTMENT
7) FLASH ADJ
After changing the MAIN PCB and SUB PCB, adjust the FLASH.
< How to adjust > a...Arrange a 18% reflect chart in a darkroom. b...Arrange a camera in a darkroom. (Use TRIPOD) c...The distance between the reflect chart and the camera should be 80cm.
d...Download the program and save it to SD memory card. e...Insert the SD memory card that has the program file and turn on the camera. f...The adjustment will be done automatically. g...After completing the upgrade, the camera is turned off automatically.
62
. ADJUSTMENT
< Description of TXT file > When making or modifying the program, see the following program codes. When modify the program, use the Memo Pad of Windows and save it as"STS373ADJ.txt"
// PM Batch Test 8 //
// adj control adj_control check_process_id 65535 adj_control set_process_id 65534 adj_control save_e2prom 1 // save eeprom adj_control save_data_file 1 // save csv... adj_control save_process_pass 1 adj_control batch 1 // enable 8 adj... adj_control osd_delay 0 // OSD Disable adj_control signal 500// start signal //adj_control signal 300// start signal //adj_control signal 300// start signal //======================================#6.Strobe Mode program Ae metering 1 Ae iso 2 Ae evc 6 Ae preview_fnum 1 Ae preview_s_speed 058 Ae preview_gain 050 Ae lock Zoom wide Delay 20 adj_strobe_intensity param adj_strobe_intensity stage PV2 adj_strobe_intensity flash_table_test 0 adj_strobe_intensity level_test_number 2 adj_strobe_intensity pre_table_index 14 0 0 0 0 adj_strobe_intensity Standard_Luma 200 310 400 620 725 1110 adj_strobe_intensity awb_gain 474 620 272 360 adj_strobe_intensity run //Delay 20 //adj_control signal 4000 delay 5 poweroff zoom_close
63
. ADJUSTMENT
8) FOCUS ADJ
After changing the MAIN PCB and BARREL, adjust the PUNT.
< How to adjust > a...Arrange a chart for adjust the FOCUS. b...Attach the camera to the tripod. c...The distance between the chart and the camera should be 80cm.
Chart
d...Download the program and save it to SD memory card. e...Insert the SD memory card that has the program file and turn on the camera. f...The adjustment will be done automatically. g...After completing the upgrade, the camera is turned off automatically.
64
. ADJUSTMENT
< Description of TXT file > When making or modifying the program, see the following program codes. When modify the program, use the Memo Pad of Windows and save it as"STS373ADJ.txt"
// PM Batch Test 8 //
// adj control adj_control check_process_id 65535 adj_control set_process_id 65534 adj_control save_e2prom 1 // save eeprom adj_control save_data_file 1 // save csv... adj_control save_process_pass 1 adj_control batch 1 // enable 8 adj... adj_control osd_delay 0 // OSD Disable adj_control signal 500// start signal //adj_control signal 300// start signal //adj_control signal 300// start signal =====================================================// Punt zoom close_to_open mode program coach idle ae metering 0 ae iso 0 ae evc 6 ae preview_fnum 1 set wb auto coach view delay 25 adj_control save_e2prom 1 adj_control save_data_file 1 adj_punt zoomstep 0 7 adj_punt searching_min_short 80 80 80 80 90 90 50 50 adj_punt searching_max_short 160 160 160 160 165 170 170 170 adj_punt searching_min -7 31 23 21 27 29 18 32 adj_punt searching_max 245 248 240 238 244 246 235 230 adj_punt limit_min_short 85 85 85 85 95 95 55 55 adj_punt limit_max_short 155 155 155 155 160 165 165 165 adj_punt limit_min 13 51 43 41 47 49 38 52 adj_punt limit_max 225 228 220 218 224 226 215 210 adj_punt slop_min -100 -100 -90 -100 -130 -150 -170 adj_punt slop_max 60 80 100 120 140 160 180 adj_punt run
65
. ADJUSTMENT
//adj_control signal 0 delay 5 poweroff zoom_close
66
. ADJUSTMENT
9) CCD DEFECT ADJ
After changing the MAIN PCB and CCD, adjust the DEFECT CELL of CCD.
< How to adjust > a...Download program file and save it to SD memory card. b...Turn on the camera. c...Adjustment will be done automatically. d...After completing the upgrade, the camera is turned off automatically.
< Description of TXT file > When making or modifying the program, see the following program codes. When modify the program, use the Memo Pad of Windows and save it as "STS373ADJ.txt"
// PM Batch Test 8 //
// adj control adj_control check_process_id 65535 adj_control set_process_id 65534 adj_control save_e2prom 1 // save eeprom adj_control save_data_file 1 // save csv... adj_control save_process_pass 1 adj_control batch 1 // enable 8 adj... adj_control osd_delay 0 // OSD Disable adj_control signal 500// start signal //adj_control signal 300// start signal //adj_control signal 300// start signal //================================#2. CCD Defect Cell //start adj_defective_pixel //adj_control check_process_id 65535 //adj_control save_e2prom 1 //adj_control save_data_file 1
67
. ADJUSTMENT
mode program //ae metering multi //ae iso 200 //ae ev 0 //ae iris 0 //awb wbal auto //coach view //delay 25 adj_defect integration adj_defect ref_level_short 800 adj_defect ref_level_long 3500 adj_defect exp_time 6 adj_defect defect_max_num1 30000 adj_defect defect_max_num2 30000 adj_defect run //end adj_defect //delay 10 //poweroff zoom_close
68
. ADJUSTMENT
10) BURNING ADJ
After changing the MAIN PCB and parts, check whether all of the camera functions work correctly.
< How to adjust > a...Download program and save it to SD memory card. b...Insert the SD memory card that has the program file and turn on the camera. c...Adjustment will be done automatically. d...After completing the adjustment, the camera is turned off automatically.
< Description of TXT file > When making or modifying the program, see the following program codes. When modify the program, use the Memo Pad of Windows and save it as"STS373ADJ.txt"
//================================#1. Burnin Test adj_control check_process_id 65535 adj_control set_process_id 65528 adj_control save_e2prom 1 adj_control save_data_file 1 adj_control rePeat_CNT 1 adj_control override_tv_usb 1 adj_control do_check_process_id 1 adj_burnin delete_all //adj_burnin format_keep adj_burnin prog_mode adj_burnin lcd_on adj_burnin flash_cap adj_burnin flash_off_cap adj_burnin norm_cap adj_burnin macro_cap adj_burnin selftimer_cap adj_burnin play_mode
69
. ADJUSTMENT
adj_burnin prog_mode adj_burnin avi_cap_5sec adj_burnin easy_mode adj_burnin aux_led_on adj_burnin wait_2sec adj_burnin aux_led_off adj_burnin burnin_end
//poweroff zoom_close
70
. ADJUSTMENT
11) EEPROM READ
To read the data of EEPROM, refer to the below codes...
< How to read > a...Download program and save it to SD memory card. b...Insert the SD memory card that has the program file and turn on the camera. c...Turn on the camera and the DATA in the EEPROM will be copied in the SD card. The codes from Start ADD. Äto End ADD. will display on the LCD monitor and the rest of codes will not display. d...Turn off the camera after reading and saving the data. e...If you read the SD card in your PC, you can find the STS3_73_E2PR.CSV file and you can check the EEPROM DATA.
< Description of TXT file > When making or modifying the program, see the following program codes. When modify the program, use the Memo Pad of Windows and save it as "STS373ADJ.txt".
dj_check e2p_read Stard ADD. End ADD.
You can change from start address to end address.
71
. ADJUSTMENT
12) EEPROM WRITE
If you want to write the DATA of EEPROM, do as follows.
< How to read > a...Insert the address and valueÄand save the program in the SD card. Ex) adj_check e2p_writeÄ301, 113 b...Insert the SD card to the camera and turn on the camera. c...Turn on the camera and the data of EEPROM will be copied to the camera. d...When the copy is complete, the camera is turned off automatically.
< Description of TXT file > When making or modifying the program, see the following program codes. When modify the program, use the Memo Pad of Windows and save it as "STS373ADJ.txt".
adj_check e2p_writeÄADD, Value adj_check e2p_writeÄADD, Value
72
. PATTERN DIAGRAM
1. PARTS ARRANGEMENT FOR EACH PCB ASS'Y
1) MAIN_TOP_S3-63
73
. PATTERN DIAGRAM
2) MAIN_BOTTOM_S3-63
74
. PATTERN DIAGRAM
3) CCD_TOP_S3-63
75
. PATTERN DIAGRAM
4) CCD_BOTTOM_S3-63
76
. PATTERN DIAGRAM
5) MAIN_BOTTOM_S3-73
77
. PATTERN DIAGRAM
6) MAIN_BOTTOM_S3-73
78
. PATTERN DIAGRAM
7) CCD_TOP_S3-73
79
. PATTERN DIAGRAM
8) CCD_BOTTOM_S3-73
80
. PATTERN DIAGRAM
9) STROBO_TOP_S3-63/S3-73
81
. PATTERN DIAGRAM
10) STROBO_BOTTOM_S3-63/S3-73
82
. PATTERN DIAGRAM
11) MODE_TOP_S3-63/S3-73
83
. PATTERN DIAGRAM
12) MODE_BOTTOM_S3-63/S3-73
84
. CIRCUIT DIAGRAM
1) MAIN_S3-63
85
. CIRCUIT DIAGRAM
2) MAIN_DDR_S3-63
86
. CIRCUIT DIAGRAM
3) MAIN_CCD_S3-63
87
. CIRCUIT DIAGRAM
4) MAIN_I/O LCD_S3-63
88
. CIRCUIT DIAGRAM
5) MAIN_KEY_S3-63
89
. CIRCUIT DIAGRAM
6) MAIN_LENS(MOTOR)_S3-63
90
. CIRCUIT DIAGRAM
7) MAIN_POWER_S3-63
91
. CIRCUIT DIAGRAM
8) MAIN_STROBO_S3-63
92
. CIRCUIT DIAGRAM
9) MAIN_S3-73
93
. CIRCUIT DIAGRAM
10) MAIN_DDR_S3-73
94
. CIRCUIT DIAGRAM
11) MAIN_CCD_S3-73
95
. CIRCUIT DIAGRAM
12) MAIN_I/O LCD_S3-73
96
. CIRCUIT DIAGRAM
13) MAIN_KEY_S3-73
97
. CIRCUIT DIAGRAM
14) MAIN_LENS(MOTOR)_S3-73
98
. CIRCUIT DIAGRAM
15) MAIN_POWER_S3-73
99
. CIRCUIT DIAGRAM
16) MAIN_STROBO_S3-73
100
. CIRCUIT DIAGRAM
17) STROBO_S3-63/S3-73
101
. CIRCUIT DIAGRAM
18) MODE_KEY_S3-63/S3-73
102
. SERVICE INFORMATION
1. The order of disassembly and assembly
Caution
1. Do the disassembling and assembling camera where the blocking static electricity mat is on the table. 2. When handling the major PCBs of camera, please wearing the band which cuts off the electric current on the wrist. 3. When handling the major parts, be careful of below caution.
Parts
F PCB type
Caution
When assembling the F PCB to the CONNECTOR by using pincette, be careful of tearing and hooking.
CCD & IR CUT
Be careful of the handprinting while handling them. Using the pincette which has soft tip. The spot will be shown by using normal alchol when cleaning them. Do the repairing where is no dust.
PCB type
Wearing the band which cuts off the electric current and do the reparing where the blocking static electricity mat is on by preventing the defect of parts.
CONTACT type
Be careful of defect and change by pincette.
103
. SERVICE INFORMATION
Disassembly
1. Remove 2 screws.
2. Remove 2 screws.
3. Remove 4 screws.
104
. SERVICE INFORMATION
4. Disassemble the BACK COVER.
5. Remove 1Äscrew.
105
. SERVICE INFORMATION
6. Disconnect the PCB from the connector.
7. Disassemble the LCD ASSY.
106
. SERVICE INFORMATION
8. Remove 1Äscrew.
9. Disconnect the PCB from the connector.
107
. SERVICE INFORMATION
10. Disassemble the FRONT COVER.
11. Discharging point : Before removing the PCB soldering, discharge the main condenser.
108
. SERVICE INFORMATION
12. 1st. Removing the PCB soldering and disassemble the 2 connectors. 2nd. Remove the 2 soldering points of battery contacts. 3rd. Disassemble the 2 wires.
13. Disassemble the MAIN PCB.
109
. SERVICE INFORMATION
14. Remove 1Äscrew.
15. Disassemble the STROBE PCB.
110
. SERVICE INFORMATION
16. Remove 2 screws.
17. Remove 2 screws.
111
. SERVICE INFORMATION
18. Disassemble the Barrel.
19. Complete.
112