Text preview for : 11. Disassembly and Reassembly.pdf part of Samsung syncmaster 920NW By Prem



Back to : Samsung 920nw.rar | Home

http://www.aldiarman.blogspot.com/
11 Disassembly and Reassembly

11 Disassembly and Reassembly
11-1 Disassembly Block

LE 1729 LCD Monitor

STAND_REAR*1 HINGE *1 SCREW M4*10 *3

ASSY, BASE BASE*1 RUBBER FOOT *6 SCREW.P.CROSS,T.T-4*8,Zn

ASSY STAND SCREW M4*10 *4

STAND_FRONT *1

BACK COVER BKT-VESA *4

LENS*1 CONTROL BOARD*1

ASSY FRONT BEZEL

BEZEL*1 BUTTON,FUNCTION *1

CHASSIS *1 PCBA I/F BOARD *1 Power Board *1 SCREW M3*6 CLIP,WIRE *1 SHIELING*1

ASSY PANEL*1 SCREW M3*5, *4 CABLE 30P FFC BOLT,#4-40*11.8,Ni *2

INNOLUX PANEL EN01

Note: The DIS assembly direction please following direction of arrowhead

11-1

http://www.aldiarman.blogspot.com/
11 Disassembly and Reassembly

Description
1. Remove 4 screw from the stand

Picture Description

2. Remove the stand and front coler

11-2

http://www.aldiarman.blogspot.com/
11 Disassembly and Reassembly

Description
3. Lift the back cover and use the jig to remove the shield lamp.

Picture Description

4. Disconnect cables

5. Lift up the shield and disconnect LVDS cables

11-3

http://www.aldiarman.blogspot.com/
11 Disassembly and Reassembly



Description

Picture Description

6. Lift up the LCD panel

11-2 Reassembly
Reassembly procedures are in the reverse order of disassembly procedures.

11-4