Text preview for : Operation%20Instruction%20&%20Installation.pdf part of Metex MXD 4660A Request:
User Manual (English Version)
Portable Bench Top True RMS digital meter
Back to : Operation%20Instruction%2 | Home
Operation Instruction & Installation
11. Operation Instruction & Installation
11-1 Product Features and Functions
11-1-1 Right side buttons
The buttons on the right side panel control your TV's basic features, including the on-screen menu system. To use the more advanced features, you must use the remote control.
Press to switch between viewing TV programs and signals from connected components. Press to see the on-screen menu. Press to raise or lower the volume and to select items when using the on-screen menu.
Press to change channels and move between items on the on-screen menu. Press to activate (or change) a particular item.
11-1-2 Side Panel Jacks
Use the right side panel jacks to connect a component that is used only occasionally (a camcorder or video game, for example).
Connect the video signal from a camcorder or video game. Connect the audio signal from a camcorder or video game.
Connect an S-Video signal from a camcorder or video game. (S-Video 3 jack and Audio L/R input 3 are used in conjunction.)
Samsung Electronics
11-1
Operation Instruction & Installation
11-1-3 Front Panel LED Indicators
The three lights on the front panel indicate the status of your TV.
Picture On/Off
Remote Control Sensor
Indicator Light Key
: Light is On : Light is Blinking : Light is Off TIMER LAMP STAND BY/TEMP Standby state. The picture will automatically appear in about 15 seconds. Auto Timer ON/OFF has been set and the set will automatically be turned on in about 25 seconds. A cooling fan inside the set is not operating normally. Lamp cover on the rear of the set is not properly shut. Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is too high, the power will shut off. Lamp may be defective. Standby mode. A timer pilot lights when Timer Auto On or Off is selected. Normal operation Normal operation (when Timer Auto On or Off is selected). Indication
· It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. · The TV has a fan to keep the inside lamp from overheating. You'll occasionally hear it working.
11-2
Samsung Electronics
Operation Instruction & Installation
11-1-4 Rear Panel Jacks
Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and two sets of component video input jacks on the rear panel of your TV. For more information, see "Connections".
a) EXT 1(RGB), 2(Y/C)
Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
e) DVI IN (AUDIO L/R)
DVI audio inputs for external devices.
b) COMPONENT IN
Video ( Y/P B /P R) and audio ( AUDIO L/R ) inputs for Component.
f) AUDIO OUT Connect to the external audio amplifier. g) SERVICE
Connector for service only.
c) PC IN (PC / AUDIO)
Connect to the video and audio output jack on your PC.
h) ANT IN
Coaxial connector for Aerial/Cable Network.
d) HDMI/DVI IN
Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device. (Not compatible with PC)
Samsung Electronics
11-3
Operation Instruction & Installation
11-1-5 Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player or Samsung Set-Top Box.
Turns the TV on and off
Direct channel selection
One or two-digit channel selection Volume increase
Switch repeatedly between the last two channels displayed Next channel/ Teletext next page External input selection/ Teletext page hold Previous channel/ Teletext previous page Information display/ Teletext reveal
Temporary sound switch-off
Volume decrease TV mode selection
Menu display/ Teletext index Move to the required menu option/ Adjust an option value respectively
Exit menu
Current time display/ Teletext Sub-page Teletext display/ Mix both teletext information and the normal broadcast Picture still Sound effect selection Picture effect selection
Automatic switch-off/ Teletext cancel Picture size/ Teletext size selection TruSurround XT mode selection Sound mode selection PIP functions: - PIP activation or deactivation (PIP) - Swapping the main and the sub picture (SWAP) - Source selection (SOURCE)
The performance of the remote control may be affected by bright light.
11-4
Samsung Electronics