Text preview for : sony_dcr-dvd110_dvd115_dvd310_dvd410_dvd610_dvd710_dvd810_level2_ver1.4.pdf part of SONY DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/ DVD610E/DVD710/DVD710E/DVD810/DVD810E level2_ver1.4 sony_dcr-dvd110_dvd115_dvd310_dvd410_dvd610_dvd710_dvd810_level2_ver1.4
Back to : sony_dcr-dvd110_dvd115_dv | Home
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E
RMT-835
SERVICE MANUAL LEVEL 2
US Model
Ver. 1.4 2008.11 Canadian Model
Revision History AEP Model
UK Model
East European Model
Revised-2 North European Model
E Model
Replace the previously issued
SERVICE MANUAL 9-852-249-33
Australian Model
with this manual. Hong Kong Model
Chinese Model
Korea Model
Argentine Model
Brazilian Model
Thai Model
Tourist Model
Photo: DCR-DVD810 Japanese Model
Link
SPECIFICATIONS DISASSEMBLY SCHEMATIC DIAGRAMS
MODEL INFORMATION TABLE BLOCK DIAGRAMS PRINTED WIRING BOARDS
SERVICE NOTE FRAME SCHEMATIC DIAGRAM REPAIR PARTS LIST
· Precaution on Replacing the VC-520 Board
The components identified by Les composants identifiés par une
mark 0 or dotted line with marque 0 sont critiques pour la
mark 0 are critical for safety. sécurité.
Replace only with part num- Ne les remplacer que par une pièce
ber specified. portant le numéro spécifié.
DIGITAL VIDEO CAMERA RECORDER
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/ 2008K0500-1
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
© 2008.11
9-852-249-34 Sony EMCS Co. Published by Kohda TEC
These specifications are extracted from instruction manual of DCR-
DVD110E/DVD115E/DVD310E/DVD410E/DVD610E/DVD710E/DVD810E.
ENGLISH JAPANESE
SPECIFICATIONS
System Focal length Operating temperature
Video compression format DCR-DVD110E/DVD115E/DVD610E 0 °C to +40 °C (32 °F to 104 °F)
F 1.8 - 4.1 Storage temperature
MPEG2/JPEG (Still images) f = 1.9 - 76 mm (3/32 - 3 in.)
Audio compression format -20 °C to +60 °C (-4 °F to +140 °F)
When converted to a 35 mm still camera
DCR-DVD110E/DVD610E Dimensions (Approx.)
For movies:
Dolby Digital 2ch 41 - 1 640 mm (1 5/8 - 64 5/8 in.) (16:9) 55 × 89 × 130mm (2 1/4 × 3 5/8 × 5 1/8 in.)
Dolby Digital Stereo Creator For still images: (w × h × d) including the projecting parts
48 - 1 920 mm (1 15/16 - 75 5/8 in.) (4:3) 55 × 89 × 130mm (2 1/4 × 3 5/8 × 5 1/8 in.)
DCR-DVD115E/DVD310E/DVD410E/ (w × h × d) including the projecting parts with
DVD710E/DVD810E DCR-DVD310E/DVD410E/DVD710E/ the rechargeable battery pack NP-FH40
Dolby Digital 2/5.1ch DVD810E attached
Dolby Digital 5.1 Creator F 1.8 - 3.2 Mass (Approx.)
Video signal f = 2.5 - 62.5 mm (1/8 - 2 1/2 in.) DCR-DVD110E/DVD115E/DVD610E
PAL color, CCIR standards When converted to a 35 mm still camera 390 g (13 oz) main unit only
Internal memory (DCR-DVD410E/ For movies: 440 g (15 oz) including the rechargeable
41 - 1 189 mm (1 5/8 - 46 7/8 in.) (16:9)** battery pack NP-FH40 and a disc
DVD810E)
For still images: DCR-DVD310E/DVD710E
8 GB 36 - 900 mm (1 7/16 - 35 1/2 in.) (4:3)
When measuring media capacity, 1 GB equals 400 g (14 oz) main unit only
Color temperature 450 g (15 oz) including the rechargeable
1 billion bytes, a portion of which is used for
[AUTO], [ONE PUSH], [INDOOR] battery pack NP-FH40 and a disc
data management.
(3 200 K), [OUTDOOR] (5 800 K) DCR-DVD410E/DVD810E
Usable discs
Minimum illumination 400 g (14 oz)main unit only
8 cm DVD-RW/DVD+RW/DVD-R/ 445 g (15 oz) including the rechargeable
DCR-DVD110E/DVD115E/DVD610E
DVD+R DL battery pack NP-FH40
6 lx (lux) (AUTO SLW SHUTTR ON, Shutter
Movie recording format speed 1/25 second) Supplied accessories
Internal memory (DCR-DVD410E/ 0 lx (lux) (during NightShot plus function) AC Adaptor (1)
DVD810E) Power cord (mains lead) (1)
MPEG2-PS DCR-DVD310E/DVD410E/DVD710E/
A/V connecting cable (1)
DVD810E
Disc 8 lx (lux) (AUTO SLW SHUTTR ON, Shutter USBcable (1)
DVD-RW: DVD-VIDEO (VIDEO mode), speed 1/25 second) Wireless Remote Commander (DCR-
DVD-Video Recording (VR mode) 0 lx (lux) (during NightShot plus function) DVD310E/DVD410E/DVD710E/DVD810E)
DVD+RW: DVD+RW Video (1)
DVD-R/DVD+R DL: DVD-VIDEO * "Exif" is a file format for still images, Rechargeable battery pack NP-FH40 (1)
"Memory Stick PRO Duo" established by the JEITA (Japan Electronics and CD-ROM "Handycam Application Software"
MPEG2-PS Information Technology Industries (1)
Still image recording format Association). Files in this format can have Operating Guide (1)
Exif Ver.2.2* additional information such as your camcorder's See page 5-25.
Viewfinder setting information at the time of recording.
Electric viewfinder (color) **The focal length figures are actual figures AC Adaptor AC-L200/L200B
resulting from wide angle pixel readout. Power requirements
Image device
DCR-DVD110E/DVD115E/DVD610E · Manufactured under license from Dolby AC 100 V - 240 V, 50/60 Hz
2.25 mm (1/8 type) CCD (Charge Coupled Laboratories. Current consumption
Device) 0.35 A - 0.18 A
Gross: Input/Output connectors Power consumption
Approx. 800 000 pixels A/V Remote Connector 18 W
Effective (Movie, 16:9)
Video/audio output jack Output voltage
Approx. 490 000 pixels
Effective (Still, 16:9) USB jack DC 8.4 V*
Approx. 310 000 pixels mini-B Operating temperature
Effective (Still, 4:3) (DCR-DVD110E/DVD115E/DVD310E/ 0 °C to +40 °C (32 °F to 104 °F)
Approx. 410 000 pixels DVD410E: output only) Storage temperature
DCR-DVD310E/DVD410E/DVD710E/ -20 °C to +60 °C (-4 °F to +140 °F)
DVD810E
LCD screen Dimensions (Approx.)
3 mm (1/6 type) CCD (Charge Coupled Picture 48 × 29 × 81mm (1 15/16 × 1 3/16 × 3 1/4in.)
Device) 6.7 cm (2.7 type, aspect ratio 16:9) (w × h × d) excluding the projecting parts
Gross: Total number of pixels Mass (Approx.)
Approx. 1 070 000 pixels 123 200 (560 × 220) 170g (6oz) excluding the power cord
Effective (Movie, 16:9) (mains lead)
Approx. 670 000 pixels General
* See at the label of the AC Adaptor for other
Effective (Still, 16:9) Power requirements specifications.
Approx. 750 000 pixels DC 6.8 V/7.2 V (battery pack)
Effective (Still, 4:3)
Approx. 1 000 000 pixels
DC 8.4 V (AC Adaptor) Rechargeable battery pack NP-FH40
Average power consumption Maximum output voltage
Lens
Using the LCD screen or the viewfinder with DC 8.4 V
Carl Zeiss Vario-Tessar normal brightness Output voltage
DCR-DVD110E/DVD115E/DVD610E DCR-DVD110E/DVD115E/DVD610E
DC 7.2 V
Optical: 40×, Digital: 80×, 2000× LCD: 2.9 W
Viewfinder: 2.7 W Capacity
DCR-DVD310E/DVD410E/DVD710E/ DCR-DVD310E/DVD710E 4.9 Wh (680 mAh)
DVD810E LCD: 3.2 W Type
Optical: 25×, Digital: 50×, 2000× Viewfinder: 2.8 W Li-ion
Filter diameter: 30 mm (1 3/16 in.) DCR-DVD410E/DVD810E Design and specifications are subject to change
LCD: 2.8 W without notice.
Viewfinder: 2.4 W
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
--2--
These specifications are extracted from instruction
manual of DCR-DVD610/DVD710/DVD810.
ENGLISH JAPANESE
SPECIFICATIONS
System Focal length Operating temperature
Video compression format DCR-DVD610 0 °C to +40 °C (32 °F to 104 °F)
F 1.8 - 4.1 Storage temperature
MPEG2/JPEG (Still images)
f = 1.9 - 76 mm (3/32 - 3 in.) -20 °C to +60 °C (-4 °F to +140 °F)
Audio compression format When converted to a 35 mm still camera
DCR-DVD610 Dimensions (Approx.)
For movies:
Dolby Digital 2ch 41 - 1 640 mm (1 5/8 - 64 5/8 in.) (16:9) 55 × 89 × 130mm (2 1/4 × 3 5/ × 5 1/8 in.)
Dolby Digital Stereo Creator For still images: (w × h × d) including the projecting parts
55 × 89 × 130mm (2 1/4 × 3 5/8 × 5 1/8 in.)
DCR-DVD710/DVD810 48 - 1 920 mm (1 15/16 - 75 5/8 in.) (4:3)
(w × h × d) including the projecting parts with
Dolby Digital 2/5.1ch DCR-DVD710/DVD810 the rechargeable battery pack NP-FH40
Dolby Digital 5.1 Creator F 1.8 - 3.2 attached
Video signal f = 2.5 - 62.5 mm (1/8 - 2 1/2 in.) Mass (Approx.)
NTSC color, EIA standards When converted to a 35 mm still camera DCR-DVD610
Internal memory (DCR-DVD810) For movies: 390 g (13 oz) main unit only
8 GB 41 - 1 189 mm (1 5/8 - 46 7/8 in.) (16:9)** 440 g (15 oz) including the rechargeable
When measuring media capacity, 1 GB equals For still images: battery pack NP-FH40 and a disc
1 billion bytes, a portion of which is used for 36 - 900 mm (1 7/16 - 35 1/2 in.) (4:3) DCR-DVD710
data management. Color temperature 400 g (14 oz) main unit only
Usable discs [AUTO], [ONE PUSH], [INDOOR] 450 g (15 oz) including the rechargeable
8 cm DVD-RW/DVD+RW/DVD-R/ (3 200 K), [OUTDOOR] (5 800 K) battery pack NP-FH40 and a disc
DVD+R DL Minimum illumination DCR-DVD810
Movie recording format DCR-DVD610 400 g (14 oz)main unit only
6 lx (lux) (AUTO SLW SHUTTR ON, Shutter 445 g (15 oz) including the rechargeable
Internal memory (DCR-DVD810)
speed 1/30 second) battery pack NP-FH40
MPEG2-PS
0 lx (lux) (during NightShot plus function) Supplied accessories
Disc AC Adaptor (1)
DVD-RW: DVD-VIDEO (VIDEO mode), DCR-DVD710/DVD810 Power cord (mains lead) (1)
DVD-Video Recording (VR mode) 8 lx (lux) (AUTO SLW SHUTTR ON, Shutter A/V connecting cable (1)
DVD+RW: DVD+RW Video speed 1/30 second) USB cable (1)
DVD-R/DVD+R DL: DVD-VIDEO 0 lx (lux) (during NightShot plus function)
Wireless Remote Commander (DCR-
"Memory Stick PRO Duo" DVD710/DVD810) (1)
* "Exif" is a file format for still images,
MPEG2-PS Rechargeable battery pack NP-FH40 (1)
established by the JEITA (Japan Electronics and
Still image recording format Information Technology Industries CD-ROM "Handycam Application Software"
Exif Ver.2.2* Association). Files in this format can have (1)
Viewfinder additional information such as your camcorder's Operating Guide (1)
Electric viewfinder (color) setting information at the time of recording. See page 5-25.
Image device **The focal length figures are actual figures
DCR-DVD610 resulting from wide angle pixel readout. AC Adaptor AC-L200/L200B
2.25 mm (1/8 type) CCD (Charge Coupled
· Manufactured under license from Dolby
Power requirements
Device) AC 100 V - 240 V, 50/60 Hz
Laboratories.
Gross: Current consumption
Approx. 680 000 pixels Input/Output connectors 0.35 A - 0.18 A
Effective (Movie, 16:9)
A/V Remote Connector Power consumption
Approx. 410 000 pixels
Effective (Still, 16:9) Video/audio output jack 18 W
Approx. 250 000 pixels USB jack Output voltage
Effective (Still, 4:3) mini-B DC 8.4 V*
Approx. 340 000 pixels Operating temperature
DCR-DVD710/DVD810 LCD screen 0 °C to +40 °C (32 °F to 104 °F)
3 mm (1/6 type) CCD (Charge Coupled Picture Storage temperature
Device) -20 °C to +60 °C (-4 °F to +140 °F)
6.7 cm (2.7 type, aspect ratio 16:9)
Gross: Dimensions (Approx.)
Approx. 1 070 000 pixels
Total number of pixels
123 200 (560 × 220) 48 × 29 × 81mm (1 15/16 × 1 3/16 × 3 1/4 in.)
Effective (Movie, 16:9)
(w × h × d) excluding the projecting parts
Approx. 670 000 pixels
Effective (Still, 16:9)
General Mass (Approx.)
Approx. 750 000 pixels Power requirements 170 g (6 oz) excluding the power cord (mains
Effective (Still, 4:3) DC 6.8 V/7.2 V (battery pack) lead)
Approx. 1 000 000 pixels DC 8.4 V (AC Adaptor) * See at the label of the AC Adaptor for other
Lens Average power consumption specifications.
Carl Zeiss Vario-Tessar Using the LCD screen or the viewfinder with
normal brightness Rechargeable battery pack NP-FH40
DCR-DVD610 Maximum output voltage
DCR-DVD610
Optical: 40×, Digital: 80×, 2000×
LCD: 2.9 W DC 8.4 V
DCR-DVD710/DVD810 Viewfinder: 2.7 W Output voltage
Optical: 25×, Digital: 50×, 2000× DCR-DVD710 DC 7.2 V
LCD: 3.3 W Capacity
Filter diameter: 30 mm (1 3/16 in.)
Viewfinder: 2.9 W
DCR-DVD810 4.9 Wh (680 mAh)
LCD: 2.9 W Type
Viewfinder: 2.5 W Li-ion
Design and specifications are subject to change
without notice.
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
--3--
ENGLISH JAPANESE
8 lx AC 1
1/30 1
MPEG2/JPEG
0 lx NightShot plus A/V 1
Dolby Digital2/5.1ch * JEITA USB 1
5.1 1
NTSC EIA NP-FH40 1
**
CD-ROM Handycam Application
8GB Software 1
1GB 10 /
1
A/V 1
USB
mini-B
AC AC-L200/L200B
8cm DVD-RW/DVD+RW/DVD-R/
DVD+R DL AC100V 240V 50/60Hz
MPEG2-PS 18W
6.7cm 2.7 16:9
DC8.4V*
DVD-RW: 123 200
DVD-VIDEO VIDEO 560 220
DVD-Video Recording VR 0 +40
DVD+RW: DVD+RW Video
DVD-R/DVD+R DL: DVD-VIDEO
20 +60
PRO DC6.8V/7.2V
MPEG2-PS DC DC8.4V 48 29 81mm
Exif Ver.2.2* 2.5W 170g
2.9W * AC
0 +40
3.0mm 1/6 CCD
107 NP-FH40
16 9 20 +60
67
16 9 55 89 130mm DC8.4V
75
4 3 55 89 130mm DC7.2V
100 NP-FH40
4.9Wh 680mAh
400g
25 Li-ion
50 2 000
30mm
F1.8 3.2 445g NP-FH40
f=2.5 62.5mm
35mm
·
41 1 189mm 16:9 **
36 900mm 4:3
3 200K 5 800K
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
--4--
Ver. 1.2 2008.05
The changed portions from
Ver. 1.1 are shown in blue.
Model information table
Non MEGA model
Model DCR-DVD110E DCR-DVD115E DCR-DVD610 DCR-DVD610E
AEP, UK, AEP, UK, US, CND, E, NE, E, AUS,
Destination
EE, NE EE, NE AR, BR HK, CH, TH
Color system PAL PAL NTSC PAL
5.1ch recording × a × ×
Data CAM PC a a a a
copy PC CAM × × a a
Remote commander × × × ×
Active Interface Shoe × × × ×
Internal flash memory × × × ×
BL board BL-021 BL-021 BL-021 BL-021
CD board CD-731 CD-731 CD-731 CD-731
CK board CK-191 CK-191 CK-191 CK-191
MS board MS-391 MS-391 MS-391 MS-391
PD board PD-351 PD-351 PD-351 PD-351
RV board RV-011 RV-011 RV-011 RV-011
MEGA model
Model DCR-DVD310E DCR-DVD410E DCR-DVD710 DCR-DVD710E DCR-DVD810 DCR-DVD810E
AEP, UK, AEP, UK, US, CND, E, KR, NE, E, AUS,
Destination US, CND, E, AR NE, E, CH
EE, NE EE, NE AR, BR, JE, J HK, TH, JE
Color system PAL PAL NTSC PAL NTSC PAL
5.1ch recording a a a a a a
Data CAM PC a a a a a a
copy PC CAM × × a a a a
Remote commander a a a a a a
Active Interface Shoe a a a a a a
Internal flash memory × a × × a a
BL board BL-022 BL-022 BL-022 BL-022 BL-022 BL-022
CD board CD-687 CD-687 CD-687 CD-672/CD-687 CD-687 CD-672/CD-687
CK board CK-192 CK-192 CK-192 CK-192 CK-192 CK-192
MS board MS-392 MS-392 MS-392 MS-392 MS-392 MS-392
PD board PD-352 PD-352 PD-352 PD-352 PD-352 PD-352
RV board RV-012 RV-012 RV-012 RV-012 RV-012 RV-012
· Abbreviation
AR : Argentine model
AUS : Australian model
BR : Brazilian model
CH : Chinese model
CND : Canadian model
EE : East European model
HK : Hong Kong model
J : Japanese model
JE : Tourist model
KR : Korea model
MX : Mexican model
NE : North European model
TH : Thai model
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
--5--
ENGLISH JAPANESE
CAUTION:
CAUTION :
The use of optical instrument with this product will increase eye
Danger of explosion if battery is incorrectly replaced.
hazard.
Replace only with the same or equivalent type.
CAUTION
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered Unleaded solder
connections. Check the entire board surface for solder splashes Boards requiring use of unleaded solder are printed with the lead-
and bridges. free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
2. Check the interboard wiring to ensure that no wires are
the lead free mark due to their particular size.)
"pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly
: LEAD FREE MARK
transistors, that were installed during a previous repair. Point
Unleaded solder has the following characteristics.
them out to the customer and recommend their replacement. · Unleaded solder melts at a temperature about 40°C higher than
4. Look for parts which, through functioning, show obvious signs ordinary solder.
of deterioration. Point them out to the customer and Ordinary soldering irons can be used but the iron tip has to be
recommend their replacement. applied to the solder joint for a slightly longer time.
5. Check the B+ voltage to see it is at the values specified. Soldering irons using a temperature regulator should be set to
6. Flexible Circuit Board Repairing about 350°C.
· Keep the temperature of the soldering iron around 270°C Caution: The printed pattern (copper foil) may peel away if the
during repairing. heated tip is applied for too long, so be careful!
· Strong viscosity
· Do not touch the soldering iron on the same conductor of the
Unleaded solder is more viscous (sticky, less prone to flow) than
circuit board (within 3 times). ordinary solder so use caution not to let solder bridges occur such
· Be careful not to apply force on the conductor when soldering as on IC pins, etc.
or unsoldering. · Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
--6--
ENGLISH JAPANESE
·
·
·
0
·
·
·
· ·
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
--7--
1. SERVICE NOTE ENGLISH JAPANESE
1-1. POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4 V), the power is shut off so
that the unit cannot operate.
These following method is available to prevent this.
Method:
Use the AC power adaptor (AC-L200/L200B).
1-2. TO TAKE OUT A DISC WHEN NOT EJECT (FORCE EJECT)
1 Open the jack cover and remove the remote control window.
2 Insert the wire etc. in the hole and down the eject slider by it.
Charge Lever
Eject Slider
Remote Control Window
Jack Cover Hole
1-3. PRECAUTION ON REPLACING THE VC-520 BOARD
DESTINATION DATA
When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
Refer to Service Manual ADJ, and perform "DESTINATION DATA WRITE".
USB SERIAL No.
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Refer to Service Manual ADJ, and perform "USB SERIAL No. INPUT".
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
1-1
ENGLISH JAPANESE
1-4. USING SERVICE JIG
Connect the extension cable (J-6082-572-A) between the DVD mechanism deck and CN4401 on the VC-520 board.
VC-520 board (side A)
CN4401
Extension cable (10P)
(J-6082-572-A)
Flexible board (10P)
DVD mechanism deck
1-5. SELF-DIAGNOSIS FUNCTION
1-5-1. Self-diagnosis Function 1-5-2. Self-diagnosis Display
When problems occur while the unit is operating, the self-diagnosis When problems occur while the unit is operating, the counter of the
function starts working, and displays on the viewfinder or LCD viewfinder or LCD screen shows a 4-digit display consisting of an
screen what to do. alphabet and numbers, which blinks at 3.2 Hz. This 5-character
Details of the self-diagnosis functions are provided in the Instruction display indicates the "repaired by:", "block" in which the problem
manual. occurred, and "detailed code" of the problem.
Viewfinder or LCD screen
C:31:11
Blinks at 3.2 Hz
C 31 11
Repaired by: Block Detailed Code
C : Corrected by customer Indicates the appropriate Refer to "1-5-3. Self-diagnosis Code Table".
H : Corrected by dealer step to be taken.
E : Corrected by service E.g.
engineer 31 ....Reload the tape.
32 ....Turn on power again.
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
1-2
ENGLISH JAPANESE
1-5-3. Self-diagnosis Code Table
Self-diagnosis Code
Repaired by:
Block Detailed Symptom/State Correction
Function Code
C 0 4 0 0 Non-standard battery is used. Use the InfoLITHIUM battery.
"Memory Stick Duo" is unformatted. Format the "Memory Stick Duo".
C 1 3 0 1
"Memory Stick Duo" is broken. Insert a new "Memory Stick Duo".
Clean the disc with the supplied cleaning cloth.
C 1 3 0 2 Disc access error
Use a compatible disc with the camcorder.
E 2 0 0 0 Flash memory data are rewritten. Make flash memory data correct value. (Note 1)
Inspect or replacement of the mechanism deck, IC (IC4401 on
E 3 1 0 0 Drive fault
the VC-520 board) and drive block.
Inspect the lens block focus reset sensor (pin 7 of CN5101 on
the VC-520 board) when focusing is performed when the focus
Difficult to adjust focus buttons of the touch panel are pressed in the focus manual mode,
E 6 1 0 0
(Cannot initialize focus.) and the focus motor drive circuit (IC5401 (Non MEGA model)
or IC5301 (MEGA model) on the VC-520 board) when the
focusing is not performed.
Inspect the lens block zoom reset sensor (pin qa of CN5101 on
the VC-520 board) when zooming is performed when the zoom
Zoom operations fault
E 6 1 1 0 lever is operated, and the zoom motor drive circuit (IC5401 (Non
(Cannot initialize zoom lens.)
MEGA model) or IC5301 (MEGA model) on the VC-520 board)
when zooming is not performed.
Check whether the flexible board of the lens is broken, and
The abnormalities in initialization of
check whether it is inserted imperfectly. If there is no problem in
the focus lens and the abnormalities in
E 6 1 1 1 the flexible board, inspect the focus/zoom motor drive circuit
initialization of the zoom lens occurred
(IC5401 (Non MEGA model) or IC5301 (MEGA model) on the
simultaneously.
VC-520 board).
Handshake correction function does not
Inspect PITCH angular velocity sensors (SE7002 on the CD-
E 6 2 0 0 work well. (With PITCH angular
672/CD-687 board) peripheral circuits. (MEGA model only)
velocity sensor output stopped.)
Handshake correction function does not
Inspect YAW angular velocity sensors (SE7001 on the CD-672/
E 6 2 0 1 work well. (With YAW angular velocity
CD-687 board) peripheral circuits. (MEGA model only)
sensor output stopped.)
Fault of writing to or erasing the flash
E 9 4 0 0 Inspect the flash memory (IC2101 on the VC-520 board). (Note 1)
memory
Inspect the internal flash memory (MDL4060S3C) (DVD410E/
E 9 4 0 1 Internal flash memory fault
DVD810/DVD810E only)
Note 1: Refer to "1-3. DESTINATION DATA WRITE", ADJ (9-852-249-51).
Note 2: Non MEGA model: DCR-DVD110E/DVD115E/DVD610/DVD610E
MEGA model: DCR-DVD310E/DVD410E/DVD710/DVD710E/DVD810/DVD810E
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
1-3
1. SERVICE NOTE ENGLISH JAPANESE
1
2
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
1-4
ENGLISH JAPANESE
C:31:11
C 31 11
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
1-5
ENGLISH JAPANESE
C 0 4 0 0
C 1 3 0 1
C 1 3 0 2
E 2 0 0 0
E 3 1 0 0
E 6 1 0 0
7
E 6 1 1 0
qa
E 6 1 1 1
E 6 2 0 0
E 6 2 0 1
E 9 4 0 0
E 9 4 0 1
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
1-6E
2. DISASSEMBLY
NOTE FOR REPAIR
· Make sure that the flat cable and flexible board are not cracked of bent at the terminal. Cut and remove the part of gilt
Do not insert the cable insufficiently nor crookedly. which comes off at the point.
(Be careful or some
· When remove a connector, don't pull at wire of connector. It is possible that a wire is snapped. pieces of gilt may be left inside)
· When installing a connector, don't press down at wire of connector.
It is possible that a wire is snapped.
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
2-1
2-1. IDENTIFYING PARTS
BT/EVF Block
BL-021 Board
BL-022 Board
FP-839 Flexible Board
Cabinet L FP-841 Flexible Board
FP-569 Flexible Board
Lens Block
CD-672 Board
CD-687 Board
CD-731 Board
FP-838 Flexible Board
FP-840 Flexible Board
Cabinet R
CK-191 Board
CK-192 Board
FP-573 Flexible Board
FP-842 Flexible Board
MS-391 Board
MS-392 Board
Mechanism Deck
Main Frame
LCD Block
PD-351 Board
VC-520 Board PD-352 Board
RV-011 Board
RV-012 Board
Front Panel
P Cabinet
- DISASSEMBLY FLOW -
2-2-1. OVERALL SECTION
Cabinet R
BT/EVF Block
2-2-2. CABINET R SECTION-1 2-2-4. CABINET L SECTION
Front Panel Cabinet L
MS-391/392 Board
LCD Block
2-2-3. CABINET R SECTION-2 2-2-5. MD Section
Hinge Block Lens Block
CK-191/192 Board VC-520 Board
Mechanism Deck
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
2-2
HELP
2-2. DISASSEMBLY
EXPLODED VIEW HARDWARE LIST
2-2-1. OVERALL SECTION
Follow the disassembly in the numerical order given.
1 Cabinet R (1-1 to 1-18)
2 BT/EVF Block (2-1 to 2-8)
2-6 (#11) 1-16 (#2)
1-15 (Open)
Refer to page 1-1 "1-2. To take out
2BT/EVF Block
a disc when not eject (force eject)".
DVD410E/DVD810/ 2-7
DVD810E
2-2
2-5 (#3)
2-8
2-4
(#3)
2-3 (#2)
1-10 (#2)
2-1
Cabinet L
Section 1Cabinet R
(See Page 2-6) (See Page 2-4)
1-17 1-8 (#2)
1-13
(Claw)
1-6
1-18 1-3 (Claw)
1-14 1-7
1-2 (#2)
1-12
1-11 (Open)
(Claw)
1-4
1-1 (Open) (Claw) 1-5
1-9 (#2)
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
2-3
2-2-2. CABINET R SECTION-1
Follow the disassembly in the numerical order given. EXPLODED VIEW HARDWARE LIST
1 Front Panel (1-1 to 1-5)
2 MS-391/392 Board (2-1 to 2-2)
3 LCD Block (3-1 to 3-9)
2 MS-391/392 Board
Cabinet R Section-2
2-1 (#11) (See Page 2-5)
2-2
(Claw)
1-2
(Claw)
1-3
(Boss)
1-1 (#11)
1-4
3LCD Block
(Claw) 3-7
1 Front Panel
3-8
1-5 (Claw)
3-3
(Claw)
3-9
(Claw)
3-5
(Claw)
3-1
(Rotate) 3-4
(Claw) 3-6
3-2 (#2)
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
2-4
2-2-3. CABINET R SECTION-2
Follow the disassembly in the numerical order given. EXPLODED VIEW HARDWARE LIST
1 Hinge Block (1-1 to 1-2)
2 CK-191/192 Board (2-1 to 2-5)
2-3 2-1 (Boss) 2 CK-191/192 Board
2-5
HELP 2
2-2
(Tripod Screw Ledge) 2-4
(#11)
1-1 (#11)
1-2 (Boss)