Text preview for : Brother-HL-4140CN-4150CDN-4570CDW-4570CDWT-Service-Manual.pdf part of Brother HL-4140CN/HL-4150CDN/HL-4570CDW/HL-4570CDWT Service manual for Brother HL-4140CN / HL-4150CDN / HL-4570CDW / HL-4570CDWT color laser printers.
Back to : Brother-HL-4140CN-4150CDN | Home
Brother Color Laser Printer
SERVICE MANUAL MODEL: HL-4140CN/4150CDN/ 4570CDW/4570CDWT
Read this manual thoroughly before maintenance work. Keep this manual in a convenient place for quick and easy reference at all times. August 2010 SM-PRN078 84E301
Confidential
TRADEMARKS
The Brother logo is a registered trademark of Brother Industries, Ltd. Apple and Macintosh are trademarks of Apple Inc., registered in the United States and other countries. PCL is either a trademark or a registered trademark of Hewlett-Packard Company in the United States and other countries. Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks of Microsoft Corporation in the United States and/or other countries. Linux is a registered trademark of Linus Torvalds in the United States and other countries. PostScript and PostScript3 are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. ENERGY STAR is a U.S. registered mark. Citrix and MetaFrame are registered trademarks of Citrix Systems, Inc. in the United States. Intel, Intel Xeon and Pentium are trademarks or registered trademarks of Intel Corporation. AMD, AMD Athlon, AMD Opteron and combinations thereof, are trademarks of Advanced Micro Devices, Inc. PictBridge is a trademark. Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs. All other trademarks are the property of their respective owners.
Model LAN Duplex printing LT
HL-4140CN Wired No No
HL-4150CDN Wired Yes No
HL-4570CDW Wired/Wireless Yes No
HL-4570CDWT Wired/Wireless Yes Yes
© Copyright Brother 2010 All rights reserved. No part of this publication may be reproduced in any form or by any means without permission in writing from the publisher. All other product and company names mentioned in this manual are trademarks or registered trademarks of their respective holders. Specifications are subject to change without notice.
Confidential
CONTENTS
REGULATION ................................................................................... I SAFETY INFORMATION .................................................................V CHAPTER 1 SPECIFICATIONS
1. SPECIFICATIONS LIST .............................................................................1-1
1.1 General ....................................................................................................................... 1-1 1.2 Network Connectivity .................................................................................................. 1-4 1.3 Service Information..................................................................................................... 1-5 1.4 Supplies ...................................................................................................................... 1-6 1.5 Paper .......................................................................................................................... 1-7 1.5.1 Paper handling .................................................................................................. 1-7 1.5.2 Media specifications .......................................................................................... 1-7 1.5.3 Type and size of paper ...................................................................................... 1-8 1.6 Unprintable Area......................................................................................................... 1-9
CHAPTER 2 ERROR INDICATION AND TROUBLESHOOTING
1. INTRODUCTION ........................................................................................2-1
1.1 Precautions................................................................................................................. 2-1 1.2 Initial Check ................................................................................................................ 2-2
2. OVERVIEW.................................................................................................2-4
2.1 Cross-section Drawing ............................................................................................... 2-4 2.2 Paper Feeding ............................................................................................................ 2-5 2.3 Operation of Each Part ............................................................................................... 2-6 2.4 Block Diagram ............................................................................................................ 2-8 2.5 Components ............................................................................................................... 2-9
3. ERROR INDICATIONS.............................................................................2-10
3.1 Error Codes .............................................................................................................. 2-10 3.2 Error Messages ........................................................................................................ 2-16 3.3 Error Cause and Remedy ......................................................................................... 2-21 3.4 Paper Feeding Problems .......................................................................................... 2-83 3.4.1 No feeding ....................................................................................................... 2-83 3.4.2 Double feeding ................................................................................................ 2-86
Confidential
3.4.3 Paper jam ........................................................................................................ 2-86 3.4.4 Dirt on paper .................................................................................................... 2-90 3.4.5 Wrinkles on paper............................................................................................ 2-90 3.5 Image Defect Troubleshooting.................................................................................. 2-91 3.5.1 Image defect examples ................................................................................... 2-91 3.5.2 Pitch indicated in roller image.......................................................................... 2-92 3.5.3 Troubleshooting image defect ......................................................................... 2-92 3.6 Software Setting Problems ..................................................................................... 2-108 3.6.1 Cannot print data ........................................................................................... 2-108 3.7 Network Problems .................................................................................................. 2-108 3.7.1 Cannot make a print through network connection (Error code ED, EE)....................................................................................... 2-108 3.8 Others Problems..................................................................................................... 2-109 3.8.1 The printer is not turned ON, or the LCD indication does not appear ........... 2-109 3.8.2 The fan does not work (Error code 2B, EC) .................................................. 2-109 3.8.3 The USB direct interface does not work (Error code CA, etc) ....................... 2-110 3.8.4 The room temperature is high or low............................................................. 2-110
CHAPTER 3 DISASSEMBLY AND ASSEMBLY
1. SAFETY PRECAUTIONS ..........................................................................3-1 2. PACKING....................................................................................................3-2 3. SCREW CATALOGUE ...............................................................................3-3 4. SCREW TORQUE LIST .............................................................................3-4 5. LUBRICATION ...........................................................................................3-6 6. OVERVIEW OF GEARS.............................................................................3-8 7. HARNESS ROUTING...............................................................................3-10 8. DISASSEMBLY FLOW.............................................................................3-21 9. DISASSEMBLY PROCEDURE ................................................................3-22
9.1 Paper Tray ................................................................................................................ 3-23 9.2 Paper Stopper........................................................................................................... 3-24 9.3 Back Cover/Back Cover Stopper Arm L/R ................................................................ 3-25 9.4 Fuser Cover .............................................................................................................. 3-28 9.5 Fuser Unit ................................................................................................................. 3-30 9.6 Side Cover L/Access Cover...................................................................................... 3-33 9.7 Side Cover R ASSY.................................................................................................. 3-36
Confidential
9.8 Duplex Feed ASSY................................................................................................... 3-38 9.9 MP Cover ASSY/MP Paper Guide ASSY ................................................................. 3-39 9.10 MP Link L/R ............................................................................................................ 3-42 9.11 Front Cover Arm L/R............................................................................................... 3-43 9.12 Front Cover Release Button/Front Cover Release Button Spring .......................... 3-47 9.13 Top Cover ASSY..................................................................................................... 3-49 9.14 Wireless LAN PCB ................................................................................................. 3-52 9.15 LCD ASSY .............................................................................................................. 3-53 9.16 Panel PCB ASSY ................................................................................................... 3-55 9.17 USB Host Relay PCB ASSY................................................................................... 3-56 9.18 Main PCB ASSY ..................................................................................................... 3-58 9.19 Engine PCB ASSY ................................................................................................. 3-60 9.20 Laser Unit ............................................................................................................... 3-61 9.21 Develop Release Motor .......................................................................................... 3-64 9.22 Front Cover Sensor ................................................................................................ 3-65 9.23 Top Drive ASSY ...................................................................................................... 3-66 9.24 Forced Develop Release Link ................................................................................ 3-71 9.25 Drum Drive Motor ................................................................................................... 3-72 9.26 Drum Position Sensor PCB ASSY.......................................................................... 3-75 9.27 Registration Solenoid ASSY ................................................................................... 3-76 9.28 Develop Release Sensor PCB ASSY/Mono Solenoid ASSY ................................. 3-77 9.29 Fuser Develop Motor ASSY ................................................................................... 3-79 9.30 PF Plate ASSY/T1 Solenoid ASSY ........................................................................ 3-80 9.31 Toner/New Sensor PCB ASSY ............................................................................... 3-82 9.32 Internal Temperature Thermistor ............................................................................ 3-83 9.33 Fuser Fan ............................................................................................................... 3-84 9.34 Paper Eject ASSY .................................................................................................. 3-86 9.35 Filter ASSY ............................................................................................................. 3-87 9.36 Paper Eject Motor ................................................................................................... 3-88 9.37 Back Cover Sensor ASSY ...................................................................................... 3-89 9.38 Power Fan .............................................................................................................. 3-90 9.39 Low-voltage Power Supply Unit.............................................................................. 3-92 9.40 Paper Eject Sensor PCB ASSY.............................................................................. 3-95 9.41 Low-voltage Power Supply PCB ASSY/Inlet Harness ASSY ................................. 3-96 9.42 Cleaner Pinch Roller Holder ................................................................................... 3-99 9.43 Registration Mark Sensor Holder ASSY/ Shutter Solenoid ..................................................................................................... 3-101 9.44 MP Paper Empty/Registration Front Sensor PCB ASSY ..................................... 3-103 9.45 PF ASSY ...............................................................................................................3-111
Confidential
9.46 T1 Registration Front/Rear Sensor PCB ASSY.................................................... 3-114 9.47 MP Sector Solenoid.............................................................................................. 3-115 9.48 T1 Paper Edge Sensor PCB ASSY/ T1 Paper Edge Actuator/ T1 Paper Edge Actuator Spring.............................................................................. 3-116 9.49 Cleaner Drive Gear 15.......................................................................................... 3-119 9.50 High-voltage Power Supply PCB ASSY ............................................................... 3-120 9.51 Waste Toner Sensor ............................................................................................. 3-123 9.52 Air Duct Cover/Blower Fan ................................................................................... 3-125
10. DISASSEMBLY PROCEDURE (LT-300CL) .........................................3-127
10.1 T2 Paper Tray Unit ............................................................................................... 3-127 10.2 T2 Separation Roller ASSY/T2 Paper Feed Roller ASSY 1 ................................. 3-129 10.3 T2 Cover Rear ...................................................................................................... 3-131 10.4 T2 Cover Left ........................................................................................................ 3-132 10.5 T2 Cover Right ..................................................................................................... 3-133 10.6 T2 Relay PCB ASSY ............................................................................................ 3-134 10.7 T2 Solenoid ASSY................................................................................................ 3-135 10.8 Collar 6 ................................................................................................................. 3-136 10.9 T2 Paper Feed Frame Unit ................................................................................... 3-137
CHAPTER 4 ADJUSTMENTS AND UPDATING OF SETTINGS, REQUIRED AFTER PARTS REPLACEMENT
1. IF YOU REPLACE THE MAIN PCB ASSY ................................................4-1
1.1 Rewriting the Firmware (Sub Firmware, Main Firmware) ........................................... 4-2 1.1.1 Checking firmware version ................................................................................ 4-2 1.1.2 Rewriting the firmware using computer ............................................................. 4-2 1.1.3 Rewriting the firmware using USB flash memory .............................................. 4-3 1.2 Initialization of EEPROM of Main PCB ASSY (Maintenance Mode: Code 01) ................................................................................... 4-4 1.3 Setting by Country (Maintenance Mode: Code 74) .................................................... 4-4 1.4 Setting the Serial Number .......................................................................................... 4-4 1.5 Sensitivity Adjustment of Density Sensor (Maintenance Mode: Code 72).................. 4-5 1.6 Performing the Developing Bias Voltage Correction (Maintenance Mode: Code 83) . 4-5 1.7 Performing the Adjustment of Color Registration (Maintenance Mode: Code 66)...... 4-5 1.8 Operational Check of Control Panel Button (Maintenance Mode: Code 13) .............. 4-5
2. IF YOU REPLACE THE REGISTRATION MARK SENSOR HOLDER ASSY ..........................................................................................4-5
2.1 Sensitivity Adjustment of Density Sensor (Maintenance Mode: Code 72).................. 4-5
Confidential
2.2 Performing the Developing Bias Voltage Correction (Maintenance Mode: Code 83) . 4-5 2.3 Performing the Adjustment of Color Registration (Maintenance Mode: Code 66)...... 4-5
3. IF YOU REPLACE THE HIGH-VOLTAGE POWER SUPPLY PCB ASSY4-6
3.1 Sensitivity Adjustment of Density Sensor (Maintenance Mode: Code 72).................. 4-6 3.2 Performing the Developing Bias Voltage Correction (Maintenance Mode: Code 83) . 4-6 3.3 Performing the Adjustment of Color Registration (Maintenance Mode: Code 66)...... 4-6
4. IF YOU REPLACE THE LASER UNIT .......................................................4-7
4.1 Sensitivity Adjustment of Density Sensor (Maintenance Mode: Code 72).................. 4-7 4.2 Performing the Developing Bias Voltage Correction (Maintenance Mode: Code 83) . 4-7 4.3 Performing the Adjustment of Color Registration (Maintenance Mode: Code 66)...... 4-7
5. IF THE MACHINE ERROR EF IS DETECTED AND THE LOW-VOLTAGE POWER SUPPLY PCB ASSY IS REPLACED...........................................4-8
5.1 Reset of Irregular Power Supply Detection Counter................................................... 4-8 5.1.1 Reset of irregular power supply detection counter using the PJL file................ 4-8 5.1.2 Reset of irregular power supply detection counter using the maintenance driver ...................................................................................... 4-8
6. IF YOU REPLACE THE DRUM DRIVE MOTOR .....................................4-10
CHAPTER 5 SERVICE FUNCTIONS
1. MAINTENANCE MODE..............................................................................5-1
1.1 How to Enter the Maintenance Mode ......................................................................... 5-1 1.2 How to Enter the End User-accessible Maintenance Mode ....................................... 5-1 1.3 List of Maintenance-mode Functions.......................................................................... 5-2 1.4 Detailed Description of Maintenance-mode Functions ............................................... 5-3 1.4.1 EEPROM parameter initialization (Function code 01, 91) ................................. 5-3 1.4.2 Monochrome image quality test pattern (Function code 09).............................. 5-4 1.4.3 Worker switch (WSW) setting and printout (Function code 10, 11) ................... 5-5 1.4.4 Operational check of LCD (Function code 12) .................................................. 5-8 1.4.5 Operational check of control panel button (Function code 13) .......................... 5-9 1.4.6 Software version check (Function code 25)..................................................... 5-10 1.4.7 "One Push Demo" setting (Function code 28) ................................................. 5-11 1.4.8 Operational check of sensors (Function code 32) ........................................... 5-12 1.4.9 LAN connection status display (Function code 33).......................................... 5-15 1.4.10 Printout of EEPROM log (Function code 40)................................................. 5-16 1.4.11 Not-disclosed-to-users functions (Function code 45)..................................... 5-17 1.4.12 Adjustment of color registration (Function code 66) ...................................... 5-21 1.4.13 Continuous print test (Function code 67)....................................................... 5-25
Confidential
1.4.14 Laser unit test pattern print (Function code 68) ............................................. 5-28 1.4.15 Frame pattern print (One-sided) (Function code 69) ..................................... 5-29 1.4.16 Frame pattern print (Two-sided) (Function code 70) ..................................... 5-31 1.4.17 Color test pattern (Function code 71) ............................................................ 5-33 1.4.18 Sensitivity adjustment of density sensor (Function code 72)......................... 5-35 1.4.19 Setting by country (Function code 74)........................................................... 5-36 1.4.20 Sensitivity adjustment of registration mark sensor and check of belt unit surface (Function code 75)........................................................................................... 5-38 1.4.21 Printout of maintenance information (Function code 77)............................... 5-40 1.4.22 Operational check of fans (Function code 78)............................................... 5-42 1.4.23 Display of machine history (log) (Function code 80) ..................................... 5-43 1.4.24 Error code indication (Function code 82)....................................................... 5-47 1.4.25 Developing bias voltage correction (Function code 83)................................. 5-48 1.4.26 Exit from the maintenance mode (Function code 99).................................... 5-49
2. OTHER SERVICE FUNCTIONS...............................................................5-50
2.1 Service Function Menus Enabled by Pressing Button (s) When Turning the Printer On .............................................................................................. 5-50 2.2 Developer Roller Counter Reset Function ................................................................ 5-52 2.3 Parts Life Reset Function ......................................................................................... 5-54 2.4 Printout of Printer Settings........................................................................................ 5-55 2.5 Deletion of User Setting Information, etc. ................................................................. 5-62 2.6 How to Recover from Errors of the Fuser Unit ......................................................... 5-63 2.7 Switching of Return Value of USB No./Support for Banding..................................... 5-64 2.8 Drum Cleaning.......................................................................................................... 5-66 2.9 Deep Sleep Function ................................................................................................ 5-67
CHAPTER 6 CIRCUIT DIAGRAMS & WIRING DIAGRAM
1. CIRCUIT DIAGRAMS.................................................................................6-1 2. WIRING DIAGRAM ....................................................................................6-6
CHAPTER 7 PERIODICAL MAINTENANCE
1. PRECAUTIONS..........................................................................................7-1 2. PERIODICAL REPLACEMENT PARTS ....................................................7-2
2.1 Procedures to Replace Periodical Replacement Parts............................................... 7-2 2.1.1 Fuser unit........................................................................................................... 7-3 2.1.2 Laser unit......................................................................................................... 7-11 2.1.3 Paper feeding kit1............................................................................................ 7-24
Confidential
2.1.4 Paper feeding kit2............................................................................................ 7-27 2.1.5 MP paper feeding kit........................................................................................ 7-30
APPENDIX 1. DELETION OF USER SETTING INFORMATION, ETC. APPENDIX 2. SERIAL NUMBERING SYSTEM APPENDIX 3. INSTALLING THE MAINTENANCE DRIVER
Confidential
REGULATION
Declaration of Conformity (Europe only) (HL-4570CDW/HL-4570CDWT only)
We, Brother Industries, Ltd. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan declare that this product is in compliance with the essential requirements of Directives 1999/5/EC and 2005/32/EC. The Declaration of Conformity (DoC) is on our Website. Please go to http://solutions.brother.com/. - choose region (eg. Europe) - choose country - choose your model - choose "Manuals" - choose Declaration of Conformity (Select Language when required.)
Declaration of Conformity (Europe only) (HL-4140CN/HL-4150CDN only)
We, Brother Industries, Ltd. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan declare that this product is in compliance with the essential requirements of Directives 2004/108/EC, 2006/95/EC and 2005/32/EC. The Declaration of Conformity (DoC) is on our Website. Please go to http://solutions.brother.com/. - choose region (eg. Europe) - choose country - choose your model - choose "Manuals" - choose Declaration of Conformity (Select Language when required.)
IEC60825-1:2007 Specification (For 220-240V models only)
This product is a Class 1 laser product as defined in IEC60825-1:2007 specifications. The label shown below is attached in countries where required. This product has a Class 3B Laser Diode which emits invisible laser radiation in the scanner unit. The scanner unit should not be opened under any circumstances.
CLASS 1 LASER PRODUCT APPAREIL À LASER DE CLASSE 1 LASER KLASSE 1 PRODUKT
Internal laser radiation
Wave length: 770 - 800 nm Output: 20 mW max. Laser Class: Class 3B
WARNING
Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.
i
Confidential
Disconnect Device
This product must be installed near an electrical socket that is easily accessible. In case of emergencies, you must disconnect the power cord from the electrical socket to shut off power completely.
Wiring Information (U.K. only)
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same rating as the original fuse. Always replace the fuse cover. Never use a plug that does not have a cover. If in any doubt, call a qualified electrician.
Warning -This product must be earthed.
The wires in the mains lead are coloured in line with the following code: - Green and Yellow: Earth - Blue: Neutral - Brown: Live
LAN Connection (Network models only)
CAUTION
DO NOT connect this product to a LAN connection that is subject to over-voltages.
Radio Interference
This product complies with EN55022 (CISPR Publication 22)/Class B.
EU Directive 2002/96/EC and EN50419
This equipment is marked with the above recycling symbol. It means that at the end of the life of the equipment you must dispose of it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream. This will benefit the environment for all. (European Union only)
ii
Confidential
For USA and Canada
Federal Communications Commission (FCC) Declaration of Conformity (For USA)
Responsible Party: Brother International Corporation 100 Somerset Corporate Boulevard P.O. Box 6911 Bridgewater, NJ 08807-0911 USA Telephone: (908) 704-1700 declares, that the products Product name: Model number: Product option: Printer HL-4140CN, HL-4150CDN, HL-4570CDW and HL-4570CDWT HL-41, HL-45 Lower Tray Unit LT-300CL
complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. (Wireless network models only) This transmitter must be co-located or operated in conjunction with any other antenna or transmitter.
Important
A shielded interface cable should be used to ensure compliance with the limits for a Class B digital device. Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user's authority to operate the equipment.
iii
Confidential
Industry Canada Compliance Statement (For Canada)
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Laser Safety (110 to 120 volt model only)
This machine is certified as a Class 1 laser product under the USA. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the machine does not produce hazardous laser radiation. Since radiation emitted inside the machine is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.
FDA Regulations (110 to 120 volt model only)
The USA Food and Drug Administration (FDA) has implemented regulations for laser products manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in the United States. The following label on the back of the machine indicates compliance with the FDA regulations and must be attached to laser products marketed in the United States. MANUFACTURED: Brother Technology (Shenzhen) Ltd. NO6 Gold Garden Ind., Nanling Buji, Longgang, Shenzhen, China This product complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No.50, dated June 24, 2007.
Internal laser radiation
Maximum radiation power: Wave length: Laser class: 20 mW 770 - 800 nm Class 3B
iv
Confidential
SAFETY INFORMATION
Definitions of Warnings, Cautions, Notes and Memos
The following conventions are used in this manual: Mark Contents Warnings tell you what to do to prevent possible personal injury.
Electrical Hazard icons alert you to a possible electrical shock.
Hot Surface icons warn you not to touch machine parts that are hot. Cautions specify procedures you must follow or avoid to prevent possible damage to the machine or other objects. Note Memo Notes tell you useful tips when servicing the machine. Memo tells you bits of knowledge to help understand the machine.
v
Confidential
Safety Precautions
Listed below are the various kinds of "WARNING" messages included in this manual.
WARNING
There are high voltage electrodes inside the machine. Before you clean the inside of the machine or replace parts, make sure that you have turned off the power switch and unplugged the machine from the AC power outlet.
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
The fuser unit becomes extremely hot during operation. Wait until it has cooled down sufficiently before replacing consumable items. DO NOT remove or damage the caution label located on or around the fuser.
vi
Confidential
WARNING
DO NOT touch the shaded parts shown in the illustration. These rollers may be rotating at high speed and an pinch or entrap your hand.
Languages on the label may vary depending on your country. DO NOT use flammable substances, any type of spray or any organic solvent/liquids contains alcohol or ammonia to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock.
If the machine becomes hot, blows smoke, or generates obscure odor, immediately turn off the power switch and unplug the machine from the AC power outlet. If metal objects, water or other liquids get inside the machine, immediately turn off the power switch and unplug the machine from the AC power outlet. This machine is heavy and weighs approximately 21.0 kg (46.3 lb). To prevent injuries when moving or lifting this machine, make sure to use at least two people. Be careful not to pinch your fingers when you set the machine back down.
vii
Confidential
CAUTION
Lightning and power surges can damage this product! We recommend that you use a quality surge protection device on the AC power line, or unplug the machine during a lightning storm. Violently closing the top cover without mounting the toner cartridge and the drum unit can damage this product.
viii
Confidential
Caution for Laser Product (WARNHINWEIS fur Laser drucker)
CAUTION: When the machine during servicing is operated with the cover open, the regulations of VBG 93 and the performance instructions for VBG 93 are valid. In case of any trouble with the laser unit, replace the laser unit itself. To prevent direct exposure to the laser beam, do not try to open the enclosure of the laser unit. Im Falle von Störungen der Lasereinheit muß diese ersetzt werden. Das Gehäuse der Lasereinheit darf nicht geöffnet werden, da sonst Laserstrahlen austreten können.
CAUTION:
ACHTUNG:
Additional Information
When servicing the optical system of the machine, be careful not to place a screwdriver or other reflective object in the path of the laser beam. Be sure to take off any personal accessories such as watches and rings before working on the machine. A reflected beam, though invisible, can permanently damage the eyes. Since the beam is invisible, the following caution label is attached on the laser unit.
ix
Confidential
CHAPTER 1
SPECIFICATIONS
Confidential
CHAPTER 1 SPECIFICATIONS
This chapter lists the specifications of each model.
CONTENTS
1. SPECIFICATIONS LIST .............................................................................1-1
1.1 General ....................................................................................................................... 1-1 1.2 Network Connectivity .................................................................................................. 1-4 1.3 Service Information..................................................................................................... 1-5 1.4 Supplies ...................................................................................................................... 1-6 1.5 Paper .......................................................................................................................... 1-7 1.5.1 Paper handling .................................................................................................. 1-7 1.5.2 Media specifications .......................................................................................... 1-7 1.5.3 Type and size of paper ...................................................................................... 1-8 1.6 Unprintable Area......................................................................................................... 1-9
Confidential
1.
1.1
SPECIFICATIONS LIST
General
Model Print method Resolution Print speed One-sided
HL-4140CN HL-4150CDN HL-4570CDW HL-4570CDWT
Electrophotographic Laser printer (Single-pass) 600 x 600 dpi, 2,400 dpi (2400 x 600) quality Monochrome/ Full Color: Up to 22/22 ppm (A4/Letter size) Monochrome/Full Color: Monochrome/ Up to 28/30 ppm Full Color: Up (A4/Letter size) to 24/25 ppm (A4/Letter size)
Two-sided
* When loading A4 or Letter-size paper from the paper tray. N/A Monochrome/Full Color: Up to 7/7 ppm (A4/Letter size) * When loading A4 or Letter size paper from the paper tray From Sleep mode: Less than 29 seconds at 23 °C (73.4 F) From Power ON: Less than 33 seconds at 23 °C (73.4 F) From Ready mode: Less than 16 seconds From Sleep mode: Less than 40 seconds StarSaphire (SS1000) 400 MHz 128 MB Up to 256 MB (DDR2 16 bit, 144 pin) Hi-Speed USB 2.0, 10BASE-T/100BASE-TX Ethernet Hi-Speed USB 2.0, 10BASE-T/100BASE-TX Ethernet, Wireless LAN IEEE802.11b/g Average: Approximately 65 W Average: Approximately 7W
Warm-up time First print time*1 CPU Memory Interface Standard Option
Power consumption
Printing Ready
Average: Approximately 560 W Average: Approximately 65 W N/A Average: Approximately 70 W (for USA) Approximately 65 W (for Europe, Asia Pacific) Average: Approximately 7 W (for USA) Approximately 8W (for Europe, Asia Pacific)
Sleep, Wireless LAN: ON
Deep Sleep
Average: Approximately 0.9 W
Average: Approximately 0.7 W (for USA) Approximately 0.9 W (for Europe, Asia Pacific)
*1
The time may change if the printer is performing adjustment of color density or adjustment of color registration.
1-1
Confidential
Model Noise level Sound pressure
HL-4140CN
HL-4150CDN
HL-4570CDW
HL-4570CDWT
Printing: LpAm = 57 dB (A) Ready: LpAm = 33 dB (A) Printing (Monochrome): LWAd = 6.63B (A) Ready: LWAd = 4.01 B (A) Printing (Monochrome): LWAd = 6.77B (A) Ready: LWAd = 4.09 B (A)
Sound power Printing (Monochrome): LWAd = 6.71B (A) Ready: LWAd = 4.07 B (A)
Environment
Temperature Humidity
Operating: 10 to 32.5 °C Storage: 0 to 40 °C Operating: 20 to 80 % Non operating: Storage: 10 to 90 % 650 x 574 x 521 mm (25.6 x 22.6 x 20.5 inch) 815 x 599 x 850 mm (32.1 x 23.6 x 33.5 inch)
Dimensions
Carton size
Machine size 410 x 486 x 313 mm (16.1 x 19.1 x 12.3 inch) 410 x 495 x 446 mm (16.1 x 19.5 x 17.6 inch) Weights with Carton without Carton, with toner/drum without Carton, and toner/drum LCD Size 25.5 kg/56.2 lb 21.0 kg/46.3 lb 39.0 kg/86.0 lb 27.0 kg/59.5 lb
16.0 kg/35.3 lb
22.0 kg/48.5 lb
16 Characters x 2 lines
Specifications are subject to change without notice.
1-2
Confidential
Computer Platform & Operating System Version Windows® Operating System*1 Windows® 2000 Professional Windows® XP Home Edition Windows® XP Professional Windows® XP Professional x64 Edition Windows Vista® Windows 7
®
Processor Minimum Speed Intel® Pentium® II or equivalent
Minimum RAM 64 MB 128 MB
Recommended
RAM 256 MB
Hard Disk Space to install 50 MB
Supported PC Interface*2 USB, 10Base-T/ 100Base-TX Ethernet, Wireless 802.11b/g
64-bit (Intel® 64 or AMD64) supported CPU Intel® Pentium® 4 or equivalent 64-bit (Intel® 64 or AMD64) supported CPU Intel® Pentium® III or equivalent 64-bit (Intel® 64 or AMD64) supported CPU Intel® Pentium® 4 or equivalent 64-bit (Intel® 64 or AMD64) supported CPU 64-bit (Intel® 64 or AMD64) supported CPU PowerPC® G4/ G5 Intel® CoreTM Processor Intel® CoreTM Processor
256 MB
512 MB
512 MB 1 GB (32-bit) 2 GB (64-bit)
1 GB 1 GB (32-bit) 2 GB (64-bit)
Windows Server® 2003 Windows Server® 2003 x64 Edition Windows Server® 2008
256 MB
512 MB
512 MB
2 GB
Windows Server® 2008 R2 Macintosh Operating System OS X 10.4.11 and 10.5.x
512 MB
1GB
80 MB
OS X 10.6.x
1GB
2GB
*1 *2
Microsoft® Internet Explorer 6.0 or greater. Third-party USB ports are not supported.
Specifications are subject to change without notice.
1-3
Confidential
1.2
Network Connectivity
Model Wired network Wireless network Network node type Network type Network node type Network type Communication mode Network security
HL-4140CN HL-4150CDN HL-4570CDW HL-4570CDWT
NC-6900h type2 10Base-T/100Base-TX Ethernet N/A N/A N/A N/A NC-7700w type2 IEEE802.11b/g Infrastructure, Ad-hoc WEP 64/128 bit, WPA-PSK (TKIP/AES), WPA2-PSK (AES), APOP, POP before SMTP, SMTP-AUTH, SSL/TLS (IPPS, HTTPS, SMTP, POP), SNMP v3, 802.1x (LEAP, EAP-FAST, PEAP, EAP-TLS, EAP-TTLS), Kerberos
Specifications are subject to change without notice.
1-4
Confidential
1.3
Service Information
Model Machine life MTBF MTTR Maximum monthly volume Periodical replacement parts Fuser unit Laser unit Paper feeding kit1 Paper feeding kit2
HL-4140CN HL-4150CDN HL-4570CDW HL-4570CDWT
200,000 pages (A4/Letter) or 5 years 4,000 hours 0.5 hours Up to 40,000 pages 100,000 pages 100,000 pages 100,000 pages 100,000 pages Up to 60,000 pages
Paper 50,000 pages feeding kit MP * As for replacement of the periodical maintenance parts, refer to "PERIODICAL MAINTENANCE" in Chapter 7. Specifications are subject to change without notice.
1-5
Confidential
1.4
Supplies
Model
Toner cartridge Starter Toner *2 Black HL-4140CN HL-4150CDN HL-4570CDW HL-4570CDWT
Approximately 2,500 pages
Cyan, Approximately 1,500 pages Magenta, Yellow Black
Standard Toner *1
Approximately 2,500 pages
Cyan, Approximately 1,500 pages Magenta, Yellow Black N/A (for USA, Asia Pacific) Approximately 4,000 pages (for Europe)
High Capacity Toner *1
N/A (for Asia Pacific) Approximately 6,000 pages (for USA) Approximately 4,000 pages (for Europe) Approximately 3,500 pages
Cyan, N/A (for USA, Magenta, Asia Pacific) Yellow Approximately 3,500 pages (for Europe) Super High Capacity Toner *1 Black
N/A
Cyan, N/A Magenta, Yellow
N/A (for USA, Europe) Approximately 6,000 pages (for Asia Pacific)
N/A (for USA) Approximately 6,000 pages (for Asia Pacific, Europe)
N/A (for USA, Asia Pacific) Approximately 6,000 pages (for Europe)
* When printing A4/Letter size one sided pages in accordance with ISO/IEC 19798. Shelf life: 2 years without opening (6 months after opening) Drum unit Life expectancy: Approximately 25,000 *3 pages/drum unit The life expectancy varies according to the use condition. (Refer to Display of the machine log (Function code 80 in Chapter 5.) * When printing A4/Letter size one sided pages in accordance with ISO/IEC 19798. Shelf life: 2 years without opening (6 months after opening)
The shelf life of toner cartridge and drum unit is guaranteed under the normal condition as below; (Temperature) Normal condition: 0 to 40 °C * Storage condition at the temperature of 40 to 50 °C: Up to 5 days * Storage condition at the temperature of -20 to 0 °C: Up to 5 days (Humidity) Normal condition: 35 to 85 % * Storage condition at the humidity of 85 to 95 %: Up to 5 days * Storage condition at the humidity of 10 to 35 %: Up to 5 days Belt unit Waste toner box
*1 *2 *3
Life expectancy: Approximately 50,000 pages/belt unit The life expectancy varies according to use the condition. Life expectancy: Approximately 50,000 pages/waste toner box
Separately sold consumable toner. Toner supplied with the printer. In the normal use, the color photosensitive drums rotate simultaneously even if no color print is made at all and black print only is made. Thus, the four color drum units reach the life expectancy at the same time.
Specifications are subject to change without notice.
1-6
Confidential
1.5
1.5.1
Paper
Paper handling
Model Paper Input Paper tray 1 Paper tray 2 MP tray Paper Output Duplex Face-down Face-up
HL-4140CN HL-4150CDN HL-4570CDW HL-4570CDWT
250 sheets 500 sheets 50 sheets 150 sheets 1 sheet (Straight paper path) N/A Yes
Specifications are subject to change without notice.
1.5.2
Media specifications
Model Media type Paper tray 1 Paper tray 2 MP tray
HL-4140CN HL-4150CDN HL-4570CDW HL-4570CDWT
Plain Paper, Thin Paper, Recycled Paper Plain Paper, Thin Paper, Recycled Paper Plain Paper, Thin Paper, Thick Paper, Thicker Paper, Recycled Paper, Bond, Label, Envelope, Env. Thin, Env.Thick, Glossy Paper*1 N/A Plain Paper, Thin Paper, Recycled Paper, Glossy Paper
Duplex Media weight Paper tray 1 Paper tray 2 MP tray Duplex Media size Paper tray 1 Paper tray 2 MP tray Duplex
*1 *2
60 to 105 g/m2 (16 to 28 lb) 60 to 105 g/m2 (16 to 28 lb) 60 to 163 g/m2 (16 to 43 lb) N/A 60 to 105 g/m2 (16 to 28 lb) A4, Letter, B5(ISO/JIS), A5, A5(Long Edge), B6(ISO), A6, Executive, Legal*2, Folio A4, Letter, B5(ISO/JIS), A5, B6(ISO), Executive, Legal*2, Folio Width: 69.8 to 216 mm (2.75 to 8.5 inch) Length: 116 to 406.4 mm (4.57 to 16 inch) N/A Letter, Legal*2, Folio (for USA), A4 (for Europe, Asia Pacific)
When you print on glossy paper, set only a single sheet on the MP tray. Legal size paper is not available in some regions outside USA and Canada.
Specifications are subject to change without notice.
1-7
Confidential
1.5.3
Type and size of paper
The printer loads paper from the installed paper tray or the manual feed slot. The names for the paper trays in the printer driver as follows: The name for the paper trays Paper tray 1 (T1) Paper tray 2 (T2) MP tray Duplex The name for the paper trays in the printer driver Tray 1 Tray 2 MP Tray DX
Paper tray 1 (T1) Plain paper 75 to 105 g/m2 (20 to 28 lb) Recycled paper Bond paper Rough paper 60 to 163 g/m2 (16 to 43 lb) Thin paper 60 to 75 g/m2 (16 to 20 lb) Thick paper 105 to 163 g/m2 (28 to 43 lb) Labels (A4 or Letter) Envelopes Yes Paper tray 2 (T2) Yes MP tray Yes Duplex Yes
Choose the media type from the printer driver
Plain Paper
Yes N/A
Yes N/A
Yes Yes
Yes N/A
Recycled Paper Bond Paper
Yes
Yes
Yes
Yes
Thin Paper
N/A
N/A
Yes
N/A
Thick Paper or Thicker Paper Label Envelopes, Env. Thin, Env. Thick Glossy Paper
N/A N/A
N/A N/A
Yes Yes
N/A N/A
Glossy paper
N/A
N/A
Only 1 sheet for paper input
Yes
Memo: - Use paper that is made for plain-paper copying. - Use paper that is 75 to 90 g/m2 (20 to 24 lb). - Use neutral paper. Do not use acidic or alkaline paper. - Use long-grain paper. - This printer can use recycled paper that meets DIN 19309 specifications. - DO NOT use ink jet paper because it may cause a paper jam or damage your printer. Specifications are subject to change without notice.
1-8
Confidential
1.6
Unprintable Area
Portrait
2 1 2 1
Landscape
2 2
1
1
Windows® printer driver and Macintosh printer driver BRScript printer driver for Windows® and Macintosh 1 2 Note: The area that cannot be printed on may vary depending on the paper size and the printer driver you are using. The unprintable area shown above is for Letter size paper. 4.23 mm (0.16 inch) 4.23 mm (0.16 inch)
1-9
Confidential
CHAPTER 2
ERROR INDICATION AND TROUBLESHOOTING
Confidential
CHAPTER 2 ERROR INDICATION AND TROUBLESHOOTING
This chapter details error messages and codes which the incorporated self-diagnostic function of the printer will display if any error or malfunction occurs. If any error message appears, refer to this chapter to find which parts should be checked or replaced. The latter half of this chapter provides sample problems which could occur in the main sections of the printer and related troubleshooting procedures.
CONTENTS
1. INTRODUCTION ........................................................................................2-1
1.1 Precautions................................................................................................................. 2-1 1.2 Initial Check ................................................................................................................ 2-2
2. OVERVIEW.................................................................................................2-4
2.1 Cross-section Drawing ............................................................................................... 2-4 2.2 Paper Feeding ............................................................................................................ 2-5 2.3 Operation of Each Part ............................................................................................... 2-6 2.4 Block Diagram ............................................................................................................ 2-8 2.5 Components ............................................................................................................... 2-9
3. ERROR INDICATIONS.............................................................................2-10
3.1 Error Codes .............................................................................................................. 2-10 3.2 Error Messages ........................................................................................................ 2-16 3.3 Error Cause and Remedy ......................................................................................... 2-21 3.4 Paper Feeding Problems .......................................................................................... 2-83 3.4.1 No feeding ....................................................................................................... 2-83 3.4.2 Double feeding ................................................................................................ 2-86 3.4.3 Paper jam ........................................................................................................ 2-86 3.4.4 Dirt on paper .................................................................................................... 2-90 3.4.5 Wrinkles on paper............................................................................................ 2-90 3.5 Image Defect Troubleshooting.................................................................................. 2-91 3.5.1 Image defect examples ................................................................................... 2-91 3.5.2 Pitch indicated in roller image.......................................................................... 2-92 3.5.3 Troubleshooting image defect ......................................................................... 2-92 3.6 Software Setting Problems ..................................................................................... 2-108 3.6.1 Cannot print data ........................................................................................... 2-108 3.7 Network Problems .................................................................................................. 2-108
Confidential
3.7.1 Cannot make a print through network connection (Error code ED, EE)....................................................................................... 2-108 3.8 Others Problems..................................................................................................... 2-109 3.8.1 The printer is not turned ON, or the LCD indication does not appear ........... 2-109 3.8.2 The fan does not work (Error code 2B, EC) .................................................. 2-109 3.8.3 The USB direct interface does not work (Error code CA, etc) ....................... 2-110 3.8.4 The room temperature is high or low............................................................. 2-110
Confidential
1.
INTRODUCTION
Troubleshooting is the countermeasure procedures that the service personnel should follow if an error or malfunction occurs with the printer. It is impossible to anticipate all of the possible troubles which may occur in future and determine the troubleshooting procedures, so this chapter covers some sample troubles. However, those samples will help the service personnel pinpoint and repair other defective elements.
1.1
Precautions
Be sure to observe and follow all the precautions to prevent any secondary problems from happening during troubleshooting. (1) Always turn off the power and unplug the power cable before removing any covers or PCBs, adjusting the printer and so on. If you need to take voltage measurements with the power switched on, take the greatest of care not to receive an electric shock. (2) When connecting or disconnecting cable connectors, make sure that you hold the connector body and not the cables. (3) Static electricity charged in your body may damage electronic parts. Before handling the PCBs, touch a metal portion of the printer to discharge static electricity charged in your body. When transporting PCBs, be sure to wrap them in conductive sheets. When replacing the PCBs, put on a grounding wrist band and perform the job on a static mat. Also take care not to touch the conductor sections on the flat cables. (4) Follow the warning by all means.
WARNING
The fuser unit becomes extremely hot during operation. Wait until it has cooled down sufficiently before replacing consumable items. DO NOT remove or damage the caution label located on or around the fuser.
WARNING
DO NOT use flammable substances, any type of spray or any organic solvent/liquids contains alcohol or ammonia to clean the inside or outside of the printer. Doing this may cause a fire or electrical shock.
(5) Verify again that the repaired portion works properly.
2-1
Confidential
1.2
Initial Check
Check the following items before attempting to repair the printer.
Operating environment
(1) Put your printer on a flat, stable surface such as a desk that is free of vibration and shocks. (2) Use the printer in a well-ventilated room; use the printer within the following ranges of temperature and humidity: temperature between 10 °C and 32.5 °C (50 °F to 90.5 °F), and the relative humidity is maintained between 20 % and 80 %. (3) Ensure the printer is not exposed to direct sunlight, excessive heat, moisture, or dust. (4) Keep the printer horizontal when you carry it. To prevent injuries when moving or lifting this printer, make sure to use at least two people.
Fig. 2-1
Power supply
(1) The AC input power supply described on the rating plate of the printer should be within ±10 % of the rated voltage. (2) The AC input power supply is within the regulated value. (3) The cables and harnesses are connected correctly. (4) The fuses are not blown.
Paper
(1) A recommended type of paper is being used. (Refer to User's guide.) (2) The paper is not damp. (3) The paper is not short-grained paper or acid paper.
Consumable parts
(1) The drum unit (including the toner cartridge) is installed correctly. (2) The belt unit and waste toner box are installed correctly.
2-2
Confidential
Others
(1) Condensation When the printer is moved from a cold place into a warm room, condensation may occur inside the printer, causing various problems as listed below. - Condensation on the surface of optical devices such as the scanner windows, lens, reflecting mirror, and protection glass, etc, may cause light print image. - If the exposure drum is cold, the electrical resistance of the photosensitive layer is increased, making it impossible to obtain the correct contrast when printing. - Condensation on the charge unit may cause corona charge leakage. - Condensation on the plate and separation pad may cause paper feed problems. If condensation has occurred, leave the printer for at least two hours to allow it to reach room temperature. If the drum unit is unpacked soon after it is moved from a cold place to a warm room, condensation may occur inside the unit which may cause incorrect images. Instruct the user to allow the unit to come to room temperature before unpacking it. This will take one or two hours. (2) Low temperature The motor may not drive normally under the low temperature environment. This is due to there being too much load to drive each unit. In this case, the "Low Temperature/Increase room temperature to allow the machine to operate" message will appear on the LCD. Increase the room temperature when the above message is indicated.
Cleaning
Use a soft dry lint-free cloth.
WARNING
DO NOT use flammable substances, any type of spray or any organic solvent/liquids contains alcohol or ammonia to clean the inside or outside of the printer. Doing this may cause a fire or electrical shock.
2-3
Confidential
2.
2.1
OVERVIEW
Cross-section Drawing
Exposure drum (Black) Exposure drum (Magenta) Exposure drum (Yellow) Exposure drum (Cyan) Paper eject roller 3
Paper eject roller 2
Registration rear actuator Registration roller MP registration front actuator MP separation roller MP paper pick-up roller MP paper empty actuator MP separation pad Registration front actuator T1 paper edge actuator T1 separation roller T1 separation pad T1 paper pick-up roller T2 separation roller T2 paper edge actuator T2 separation pad DX feed roller Belt unit DX feed roller Duplex feed ASSY Paper eject roller 1 Paper eject actuator Heat roller Pressure roller
T2 paper pick-up roller
Fig. 2-2
2-4
Confidential
2.2
Paper Feeding
DX path
Paper eject from the back side. Paper feed from the MP tray.
Paper tray 1 path
Paper tray 2 path
Fig. 2-3
2-5
Confidential
2.3
Operation of Each Part
Part name T1 paper pick-up roller T1 separation roller, T1 separation pad T1 paper edge actuator Operation Feed the paper from the paper tray 1. Separate into single sheet from the paper tray 1. Detect whether or not the paper tray 1 is installed. Detect whether or not paper is loaded. Detect the paper jam of front part. Detect the front edge of paper and control the drive of the registration roller. Detect the paper jam of front part. When the front edge of the paper hit the stopped registration roller and the inclination of the paper is corrected. After correction is made, the registration roller rotates to feed the paper to the belt unit. Detect the passage of paper and adjust the starting position for writing on a sheet of paper. Detect the paper jam of center part. Detect the rear edge of paper and identify the paper size. Feed the paper to the drum unit for each color and transfer toner on the paper. Fuse and fix the toner transferred on paper by heat and pressure, and feed the paper to the paper eject roller 1. Detect whether or not paper is ejected from the fuser unit. In the case of the duplex printing, detect the rear edge of paper and adjust the timing of the paper eject roller 3 switching. Feed the paper ejected from the fuser unit to the paper eject roller 2. Feed the paper to the paper eject roller 3. Eject the paper to the face-down output tray. In the case of the duplex printing, after the paper is fed from the eject roller 3 up to a certain point with the front of the sheet printed, the eject roller 3 rotates conversely and feeds the paper to the duplex tray. Feed the paper passed in the duplex tray to the registration roller. Feed the paper from the MP tray. Separate into single sheet from the MP tray. Detect whether paper is loaded in the MP tray. Detect the front edge of paper from MP tray and control the drive of the registration roller. Detect the paper jam of MP part.
Registration front actuator
Registration roller
Registration rear actuator
Belt unit Heat roller, Pressure roller Paper eject actuator
Paper eject roller 1 Paper eject roller 2 Paper eject roller 3
DX feed roller MP paper pick-up roller MP separation roller, MP separation pad MP paper empty actuator MP registration front actuator
2-6
Confidential
Part name T2 paper pick-up roller T2 separation roller, T2 separation pad T2 paper edge actuator
Operation Feed the paper from the paper tray 2. Separate into single sheet from the paper tray 2. Detect whether or not the paper tray 2 is installed. Detect whether or not paper is loaded.
2-7
Confidential
2.4
Block Diagram
Front cover sensor Develop drive motor PF drive motor Drum drive motor Develop release motor Develop release sensor PCB T1 paper pick-up solenoid
Toner/New sensor PCB
Drum position sensor PCB
T1 registration front/rear sensor PCB MP paper pick-up solenoid MP paper empty/registration front sensor PCB Registration solenoid T1 paper edge sensor PCB Mono solenoid Engine PCB T2 sensor PCB T2 registration sensor PCB Plate motor Paper eject unit T2 solenoid Paper tray 2 Low-voltage power supply PCB EL emission circuit Toner sensor (emission) High-voltage power supply PCB CPU
External temperature/ humidity sensor
Paper eject motor T2 Relay PCB ASSY Back cover sensor
Waste toner sensor Density sensor shutter solenoid Fuser fan Blower fan Power fan
Polygon motor
LD PCB Laser unit
LCD Belt unit temperature sensor Internal temperature sensor Main PCB Center thermistor Side thermistor Fuser unit Registration mark R PCB Paper eject sensor PCB USB host relay PCB Panel PCB Back light module
Wireless LAN PCB
Registration mark L PCB
Fig. 2-4
2-8
Confidential
2.5
Components
Toner cartridge
Top cover ASSY Drum unit Wireless LAN PCB
Laser unit Belt unit Paper eject ASSY Fuser cover Back cover Fuser unit Low-voltage power supply unit Fuser fan Waste toner box
Side cover R ASSY
Duplex feed ASSY Registration mark sensor holder ASSY Power fan Base frame unit Top drive ASSY Main PCB ASSY
High-voltage power supply PCB ASSY Blower fan Waste toner sensor MP ASSY PF ASSY
Toner/New sensor PCB ASSY
MP paper guide ASSY
Side cover L Access cover Engine PCB ASSY PF cleaner drive ASSY Front cover MP cover ASSY
Paper tray
Fig. 2-5
2-9
Confidential
3.
ERROR INDICATIONS
This printer includes a self-diagnosis function. If the printer does not work normally it judges that an error has occurred, and indicates the corresponding error message on the LCD, which in turn helps the service men to quickly find out the problem.
3.1
Error codes
Error Codes
Problem The back cover is open upon duplex printing. (The back cover sensor is OFF.) Color registration adjustment failure. (Error, which cannot be recorded, occurs.) Color registration adjustment failure. (Toner of the color which is being used reached the end of life.) Color registration adjustment failure. (Incorrect measurement value of color registration adjustment.) Paper of unsupported size for duplex printing or paper of different sizes is loaded. The paper tray 1 is not installed before printing. (The T1 paper edge sensor is OFF.) The paper tray 2 is not installed before printing. (The T2 paper edge sensor is OFF.) The drum unit reached the end of life. Condensation occurred on the laser unit.
Refer to: Error codes
Problem Drum error. (An error occurred after the counter value exceeded the value more than twice as long as the life of the drum.) (Printing is not available until the drum unit is replaced.) Drum error. (An error occurred after the counter value exceeded the value more than twice as long as the life of the drum.) (Printing is not available until the drum unit is replaced.) Drum error. (An error occurred after the counter value exceeded the value more than twice as long as the life of the drum.) (Printing is not available until the drum unit is replaced.) The drum unit will reach the end of life soon. More than the specified number of the option trays is installed. Laser diode error (K). Laser diode error (Y). Laser diode error (M). Laser diode error (C). Internal temperature sensor error. Develop drive motor error. Belt drive motor error. PF drive motor error.
Refer to:
0F
2-21
1B
2-25
10
2-21
1C 11 2-21
2-25
12
2-22 1D
2-25
16
2-22
17
2-23
1E
2-25
1F 18 2-23 20 21 19 2-24 22 23 2-24 24 25 26 27
2-26
2-26 2-26 2-26 2-26 2-27 2-27 2-27 2-28
1A
2-10
Confidential
Error codes
Problem Drum drive motor error. Paper eject motor error. Develop release motor error. Blower fan error. Black Toner/New sensor PCB error. Yellow Toner/New sensor PCB error. Magenta Toner/New sensor PCB error. Cyan Toner/New sensor PCB error. Erase lamp current value error. Density sensor error. Density sensor shutter operation error. Registration mark R PCB ASSY error. Registration mark L PCB ASSY error. Failure in NVRAM of the engine PCB ASSY. Error in the high-voltage power supply PCB while the printer is in the standby mode. Belt unit temperature sensor error. External temperature/humidity sensor error. External temperature/humidity sensor error. Main PCB failure. Main PCB DRAM access error. Main PCB error. (Write error in NVRAM)
Refer to:
Error codes
Problem Main PCB error. (Read error in NVRAM.) Main PCB error. (Bus error in NVRAM.) Write error in engine firmware. Error in the high-voltage power supply PCB while the printer is in operation. High-voltage power supply PCB transfer error. ASIC error of the main PCB. The black toner cartridge is not installed. The yellow toner cartri