Equipment_Signals.pdf part of Mitsubishi VS-50805, WT-60805, WS-55905, WS-65905, WS-73905, WS-55805, WT-46805 Mitsubishi VS-50805, 60805, WS-55905, 65905, 73905, 55805, WT-46805 (Ch V16 N W).part1.rar, Mitsubishi VS-50805, WT-60805, WS-55905, WS-65905, WS-73905, WS-55805, WT-46805 (Chassis V16 N W) (Training Manual + Schematic) text manual preview

Text preview for : Equipment_Signals.pdf part of Mitsubishi VS-50805, WT-60805, WS-55905, WS-65905, WS-73905, WS-55805, WT-46805 Mitsubishi VS-50805, WT-60805, WS-55905, WS-65905, WS-73905, WS-55805, WT-46805 (Chassis V16 N W) (Training Manual + Schematic)

Back to : Mitsubishi VS-50805, 6080 | Home

MODELS: VS-50805 / VS-60805 / WT-46805 / WS-55805 / WS-55905 / WS-65905 / WS-73905

ELECTRICAL ADJUSTMENTS
Note: Perform only the adjustments required. Do not attempt an alignment if proper equipment is not available.

1. Test Equipment

Oscilloscope (Unless otherwise specified, use 10:1 probes) Signal Generator (both SD and HD capable) Frequency Counter Direct Current Voltmeter Direct Current Power Supply Multiplex Audio Signal Generator Direct Current Ampere Meter

2. Test Signal
A. Monoscope Signal
Note: If you do not have a monoscope signal source, connect the unit to a VCR and play a Monoscope *alignment tape. (* Part Number: 859C568060)

B. Color Bar Signal
Use the color bar signal shown below, unless otherwise specified in this manual. Monoscope Signal

100% 75%

40%

40% 1H

Split-Field Color Bars (100% window) Page 19