Raster_Geometry_Adjustments.pdf part of Mitsubishi VS-50805, WT-60805, WS-55905, WS-65905, WS-73905, WS-55805, WT-46805 Mitsubishi VS-50805, 60805, WS-55905, 65905, 73905, 55805, WT-46805 (Ch V16 N W).part1.rar, Mitsubishi VS-50805, WT-60805, WS-55905, WS-65905, WS-73905, WS-55805, WT-46805 (Chassis V16 N W) (Training Manual + Schematic) text manual preview

Text preview for : Raster_Geometry_Adjustments.pdf part of Mitsubishi VS-50805, WT-60805, WS-55905, WS-65905, WS-73905, WS-55805, WT-46805 Mitsubishi VS-50805, WT-60805, WS-55905, WS-65905, WS-73905, WS-55805, WT-46805 (Chassis V16 N W) (Training Manual + Schematic)

Back to : Mitsubishi VS-50805, 6080 | Home

MODELS: VS-50805 / VS-60805 / WT-46805 / WS-55805 / WS-55905 / WS-65905 / WS-73905
[Conv/Defl] 19. Geometry Preset
Measuring Instrument Test Point Ext. Trigger Measuring Range Input Signal Input Terminal ------------------NTSC & HD Video & HD Inputs

Purpose: Symptom:

To preset data controlling raster geometry Raster distortion.

Note: This procedure is usually only necessary if: An E2PROM is replaced in the Control or Convergence circuits. E2RESET or Convergence Reset has been activated. Procedure In the Service Adjustment and Coarse Convergence Modes set the data to the values given in the Tables below.
Function Display V16N Data V16W 55/65/73" V16W 46" Item # Abbrev. HD NTSC HD NTSC HD NTSC 1 HWID 34 39 40 44 38 44 2 HKEY 35 36 40 36 30 25 3 EWPT 47 55 25 25 31 25 4 EWCT 42 42 40 40 40 40 5 EWPB 36 54 31 20 27 20 6 EWCB 34 34 38 34 38 34 7 VHGT 16 16 31 40 21 31 8 VLIN 0 0 0 0 0 0 9 VSCN 7 7 7 7 7 7 10 VLNT 0 0 0 0 0 0 11 VLNB 0 0 0 0 0 0

DEFL JUNGLE Function

SERVICE MODE Activate .. MENU-1-2-5-7 Function .....AUDIO Item No. ..VIDEO Adjust Data ..ADJUST Save Data . ENTER Exit ..MENU (twice)
CONVERGENCE MODE Acivate ..MENU-1-2-5-9 Misc. ."6" Coarse..."5" Fine ..."4" Color (R,G or B)AUDIO Item No...VIDEO Adjust/Move.ADJUST Cursor Toggle...ENTER Save & Exit..MENU (twice)

CONV GREEN Items
Item Number 0 1 2 3 4 5 6 7 Abbrev. Name HSTA* SPCC HWID SKEW VSTA* VKEY TBPC TILT

CONV. HD WITH NO SIGNAL 1. MENU-1-2-7-0 2. Set DTV Port to HD 3. MENU (twice) 4. INPUT select HD Inputs 5. MENU-1-2-5-9 After adjusting, set the DTV Port to AUTO

Data (SD/HD) 50-60" 55-65-73" 46" -35/-35 0/0 0/0 0/0 -35/-35 0/-10 0/0 0/0 -220/-150 -220/-200 -220/-200 0/0

CONV RED Items
Item Number 0 1 2 3 4 5 6 7 Abbrev. Name HSTA* HLIN SKEW HWID HSBW VST* VKEY TILT 50-60" +50/+50 -220/-200 0/0 0/0 30/30 -20/-20 -140/-120 0/0

Data (SD/HD) 55-65-73" 46" +40/+50 +75/+75 -210/-200 -225/-210 +10/+10 +5/+5 -25/-5 +15/+20 -100/-100 -115/-85

CONV BLUE Items
Item Number 0 1 2 3 4 5 6 7

Abbrev. Data (SD/HD) Name 50-60" 55-65-73" 46" HSTA* -50/-50 -40/-40 -75/-75 HLIN +220/+200 +240/+220 +240/+215 SKEW 0/0 -10/-10 0/0 HWID 0/0 -20/-5 -15/-20 HSBW -50/-50 -45/-45 -45/-45 VST* -20/-20 -10/-10 -5/-5 VKEY +140/+120 +115/+115 +115/+105 TILT 0/0 0/0

Page 52

MODELS: VS-50805 / VS-60805 / WT-46805 / WS-55805 / WS-55905 / WS-65905 / WS-73905
[Deflection Circuit] 20: Deflection Geometry Adjustment
Measuring Instrument Test Point Ext. Trigger Measuring Range Input Signal Input Terminal -----------------Monoscope (NTSC & HD) Video & HD Inputs

Purpose: Symptom:

To set the height, width and linearity of the raster. Incorrect height, width and/or linearity.

NTSC Mode 1. Supply an NTSC Monoscope signal to a Video Input. 2. Select the Monoscope as the signal source (Input button) 3. Activate the Service Mode, Defl. Jungle Function. 4. Select and adjust each of the following items. 7 VHGT ... so the vertical marker sum = 4 8 VLIN ... so the large circle is round 1 HWD ... so the horizontal marker sum = 7 5. Save data and Exit the Service Mode. HD Mode 1. Supply a Monoscope signal to a HD Inputs. 2. Select the HD Inputs as the signal source (Input button) 3. Activate the Service Mode, Defl. Jungle Function. 4. Select and adjust each of the following items. 7 VHGT ... so the vertical marker sum = 2 8 VLIN ... so the large circle is round 1 HWD ... so the horizontal marker sum = 10 5. Save data and Exit the Service Mode.

SERVICE M ODE Activate .. MENU-1-2-5-7 Function .....AUDIO Item No. ..VIDEO Adjust Data ..ADJUST Save Data . ENTER Exit ..MENU (twice)

Page 53

MODELS: VS-50805 / VS-60805 / WT-46805 / WS-55805 / WS-55905 / WS-65905 / WS-73905
[Convergence Circuit] 21. Convergence Geometry Adjustment
Measuring Instrument Test Point Ext. Trigger Measuring Range Input Signal Input Terminal ------------------NTSC -- None HD -- HD sync Video & HD Inputs

Purpose: Symptom:

To set the Convergence circuit geometry adjustments. Raster distortion at the top, bottom or sides of the picture.

Note: Deflection Circuit Geometry must be performed before this adjustment. NTSC mode 1. Select a Video Input with not signal. 2. Activate the Convergence Mode, Coarse Green. 3. Adjust the Coarse Green Items shown below for straight crosshatch lines. 4. Select the Fine Green Mode, a Cursor is displayed on the crosshatch. 5. Use the Cursor to adjust for straight crosshatch lines. 6. Exit the Convergence Mode. HD mode 1. Supply horizontal and vertical HD sync to the HD Inputs. Note: If an HD signal is not available, use the Conv. HD With No Signal procedure. 2. Select the HD Inputs as the signal source (Input button) 3. Enter the Convergence Mode, Coarse Green. 4. Repeat NTSC Steps 3 through 6 in the HD mode.

CONVERGENCE MODE Acivate ..MENU-1-2-5-9 Misc. ."6" Coarse..."5" Fine ..."4" Color (R,G or B)AUDIO Item No...VIDEO Adjust/Move.ADJUST Cursor Toggle...ENTER Save & Exit..MENU (twice)

CONV. HD WIT H NO SIGNAL 1. MENU-1-2-7-0 2. Set DTV Port to HD 3. MENU (twice) 4. INPUT select HD Inputs 5. MENU-1-2-5-9 After adjusting, set the DT V Port to AUT O

Page 54