Text preview for : VE710S-2 VE710B-2 VA721 Control Description.pdf part of jean ve710s-2 VE710S-2 VE710B-2 VA721 control description



Back to : VE710S-2 VE710B-2 VA721 C | Home

3. Front Panel Function Control Description
VE710s-2/VE710b-2/VA721

Main Menu With OnView controls

Front Control Panel shown below in detail

Displays the control screen for the highlighted control. Also toggles between two controls on some screens. Also a shortcut to Auto Image Adjust. Power light Green = ON Orange = Power Saving

Scrolls through menu options and adjusts the displayed control. Also a shortcut to display the Contrast adjustment control screen.

Displays the Main Menu or exits the control screen and saves adjustments.

Power On/Off

Do the following to adjust the screen image:
1

To display the Main Menu, press button [1].
Main Menu
AUTO

SET

Auto Adjust Contrast/Brightness Color Adjust

i ?

Information Image Adjust Setup Menu Memory Recall

1:EXIT

2:SELECT

NOTE: All OnView menus and adjustment screens disappear automatically after about 15 seconds. This time period is adjustable through the Setup menu and the OSD timeout control described on page 11.
2 3

To highlight a control you want to adjust, press I or J to scroll up or down the Main Menu. To select the highlighted control, press button [2]. A control screen appears like the example shown below.
Contrast

1:EXIT

2:

Brightness

The line at the bottom of the screen tells you what you can do next: Exit or Select the control that is highlighted.

4 5

To adjust the control, press the up I or down J buttons. To save the adjustments and exit the menu, press button [1] twice.

The following tips may help you optimize your display: · Adjust your computer's graphic card so that it outputs a video signal 1280 x 1024 @ 60 Hz to the LCD dislay. (Look for instructions on "changing the refresh rate" in your graphic card's user guide.) · If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible. (The black border around the edge of the screen should barely touch the illuminated "active area" of the LCD dislay.)

Main Menu Controls
Adjust the menu items shown below by using the up Iand down Jbuttons. Control Explanation
Auto Adjust automatically sizes, centers, and fine tunes the

video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image.
NOTE: Auto Adjust works with most common video cards. If

this function does not work on your LCD dislay, then lower the video refresh rate to 60 Hz and set the resolution to its pre-set value.
Contrast adjusts the difference between the image background (black level) and the foreground (white level). Brightness adjusts background black level of the screen image. Color Adjust provides several color options: preset color

temperatures and User which allows you to adjust red (R), green (G), and blue (B). The factory setting for this product is 6500K (6500 Kelvin).

sRGB -- sRGB is quickly becoming the industry standard for color

management, with support being included in many of the latest applications. Enabling this setting allows the LCD display to more accurately display colors the way they were originally intended. Enabling the sRGB setting will cause the Contrast and Brightness adjustments to be disabled.
9300K -- Adds blue to the screen image for cooler white (used

in most office settings with fluorescent lighting). 6500K -- Adds red to the screen image for warmer white and richer red. Default setting. 5400K -- Adds green to the screen image for a darker color.

Control

Explanation
User -- Individual adjustments for red, green, and blue. 1 2 3

To select color (R, G or B) press button [2]. To adjust selected color, press I or J. When you are finished making all color adjustments, press button [1] twice.

i

Information displays the timing mode (video signal input)

coming from the graphics card in your computer. See your graphic card's user guide for instructions on changing the resolution and refresh rate (vertical frequency). VESA 1280 x 1024 @ 60 Hz (recommended) means that the resolution is 1280 x 1024 and the refresh rate is 60 Hertz.

Image Adjust
Image Adjust
H./V. Position H. Size Fine Tune Sharpness

1:EXIT

2:SELECT

The Image Adjust controls are explained below:
H./V. Position adjusts horizontal and vertical position of the

screen image. You can toggle between Horizontal and Vertical by pressing button [2]. Horizontal moves the screen image to the left or to the right. Vertical moves the screen image up and down.
H. Size (Horizontal Size) adjusts the width of the screen image. NOTE: Vertical size is automatic with your LCD dislay.

Control

Explanation
Fine Tune sharpens focus by aligning the illuminated text and/

or graphic characters. NOTE: Try the Auto Adjust (see page 9) before using the Fine Tune control.
Sharpness adjusts the clarity and focus of the screen image. Setup Menu displays the menu shown below.

?

The Setup Menu controls are explained below.
Language Select allows you to choose the language used in

the menus and control screens.
Resolution Notice advises the optimal resolution to use.

OSD

OSD Position allows you to move the on-screen display menus

and control screens.
OSD Timeout sets the length of time an on-screen display screen is displayed. For example, with a "15 second" setting, if a control is not pushed within 15 seconds, the display screen disappears.

Control

Explanation

OSD

OSD Background allows you to turn the On-Screen display background on or off. This means that while making adjustments from the OSD control screens you can also view open software applications, or the Windows desktop.
Memory Recall returns adjustments to the original factory

settings if the display is operating in a factory Preset Timing Mode listed in this user guide.

Short Cut Key

Function Key : 5 Keys ! [1] [2] [] or []

1

2

Main Menu Auto Image Adjust to immediately activate Contrast menu. It should be change to Brightness OSD by push button [2]. recall Contrast or Brightness while in the Contrast or Brightness adjustment, or recall both of Contrast and Brightness when the OSD is not open. toggle 720x400 and 640x400 mode when input 720x400 or 640x400 mode. White Balance. Power Lock OSD Lock

[] + []

[1] + [2] [1] + [] + []
(Keep pushing 5 sec)

[1] + [] [1] + []