Text preview for : MEXN5100BT_SERVICE_MANUAL.pdf part of SONY MEX-N5100BT Service Manual for MEX-N5100BE/N5100BT/ N5150BT
Back to : MEXN5100BT_SERVICE_MANUAL | Home
MEX-N5100BE/N5100BT/ N5150BT
SERVICE MANUAL
Ver. 1.0 2014.12
US Model Canadian Model AEP Model UK Model
MEX-N5100BT
E Model Australian Model Russian Model
Photo: MEX-N5100BT The service manual of the mechanism deck, used in this model, has been issued in a separate volume. Please refer to the service manual of the MG-101 series for the mechanism deck information. · The tuner and CD sections have no adjustments.
MEX-N5150BT
MEX-N5100BE
Model Name Using Similar Mechanism Mechanism Type Optical Pick-up Name
MEX-N5000BE/N5000BT/ N5050BT/N5070BT MG-101CF-188 DAX-25A
SPECIFICATIONS
(US and Canadian models only)
FOR THE CUSTOMERS IN THE USA. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CLIENTS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC. AUDIO POWER SPECIFICATIONS
CEA2006 Standard Power Output: 17 Watts RMS × 4 at 4 Ohms < 1% THD+N SN Ratio: 80 dBA (reference: 1 Watt into 4 Ohms)
(AEP and UK models)
FM Tuning range: 87.5 108.0 MHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: FM CCIR: -1,956.5 to -487.3 kHz and +500.0 to +2,095.4 kHz Usable sensitivity: 8 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 73 dB Separation: 50 dB at 1 kHz Frequency response: 20 15,000 Hz MW/LW Tuning range: MW: 531 1,602 kHz LW: 153 279 kHz Antenna (aerial) terminal: External antenna (aerial) connector Sensitivity: MW: 26 V, LW: 50 V
MW/LW
(Saudi Arabia model)
FM Tuning range: 87.5 108.0 MHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: FM CCIR: -1,956.5 to -487.3 kHz and +500.0 to +2,095.4 kHz Usable sensitivity: 8 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 73 dB Separation: 50 dB at 1 kHz Frequency response: 20 15,000 Hz MW Tuning range: 531 1,602 kHz Antenna (aerial) terminal: External antenna (aerial) connector Sensitivity: 26 V SW Tuning range: SW1: 2,940 7,735 kHz SW2: 9,500 18,135 kHz (except for 10,140 11,575 kHz) Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: -2,463.8 to -1,710.1 kHz and +1,710.0 to +2,418.4 kHz Sensitivity: 26 V
Tuning range: MW: 531 1,602 kHz LW: 153 279 kHz Antenna (aerial) terminal: External antenna (aerial) connector Sensitivity: MW: 26 V, LW: 50 V
(E, Mexican, Indian and Australian models)
FM Tuning range: 87.5 108.0 MHz (at 50 kHz step) 87.5 108.0 MHz (at 100 kHz step) 87.5 107.9 MHz (at 200 kHz step) FM tuning step: 50 kHz/100 kHz/200 kHz switchable Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: FM CCIR: -1,956.5 to -487.3 kHz and +500.0 to +2,095.4 kHz Usable sensitivity: 8 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 73 dB Separation: 50 dB at 1 kHz Frequency response: 20 15,000 Hz AM Tuning range: 531 1,602 kHz (at 9 kHz step) 530 1,710 kHz (at 10 kHz step) AM tuning step: 9 kHz/10 kHz switchable Antenna (aerial) terminal: External antenna (aerial) connector Sensitivity: 26 V
Tuner section (US and Canadian models)
FM Tuning range: 87.5 107.9 MHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: FM CCIR: -1,956.5 to -487.3 kHz and +500.0 to +2,095.4 kHz Usable sensitivity: 8 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 73 dB Separation: 50 dB at 1 kHz Frequency response: 20 15,000 Hz AM Tuning range: 530 1,710 kHz Antenna (aerial) terminal: External antenna (aerial) connector Sensitivity: 26 V
(Russian model)
FM Tuning range: FM1/FM2: 87.5 108.0 MHz (at 50 kHz step) FM3: 65 74 MHz (at 30kHz step) Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: FM CCIR: -1,956.5 to -487.3 kHz and +500.0 to +2,095.4 kHz FM OIRT: -1,815.6 to -943.7 kHz and +996.6 to +1,776.6 kHz Usable sensitivity: 8 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 73 dB Separation: 50 dB at 1 kHz Frequency response: 20 15,000 Hz
Continued on next page
AUDIO SYSTEM
9-896-114-01
2014L33-1 © 2014.12
Sony Corporation
Published by Sony Techno Create Corporation
MEX-N5100BE/N5100BT/N5150BT
CD Player section
Signal-to-noise ratio: 120 dB Frequency response: 10 20,000 Hz Wow and flutter: Below measurable limit The maximum number of: (CD-R/CD-RW only) folders (albums): 150 (including root folder) files (tracks) and folders: 300 (may less than 300 if folder/file names contain many characters) displayable characters for a folder/file name: 32 (Joliet)/64 (Romeo) Corresponding codec: MP3 (.mp3), WMA (.wma) and AAC (.m4a)
Power amplifier section
Output: Speaker outputs Speaker impedance: 4 8 ohms Maximum power output: 55 W × 4 (at 4 ohms)
Copyrights
libFLAC
Copyright (C) 2000-2009 Josh Coalson Copyright (C) 2011-2013 Xiph.Org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
General
Outputs: Audio outputs terminal: front, rear, sub Power antenna (aerial)/Power amplifier control terminal (REM OUT) Inputs: SiriusXM input terminal (US and Canadian models only) Remote controller input terminal Antenna (aerial) input terminal MIC input terminal AUX input jack (stereo mini jack) USB port Power requirements: 12 V DC car battery (negative ground (earth)) Rated current consumption: 10 A Dimensions: Approx. 178 mm × 50 mm × 177 mm (7 1/ 8 in × 2 in × 7 in) (w/h/d) Mounting dimensions: Approx. 182 mm × 53 mm × 160 mm (7 1/ 4 in × 2 1/ 8 in × 6 5/ 16 in) (w/h/d) Mass: Approx. 1.2 kg (2 lb 11 oz) Package contents: Remote commander (1): RM-X231 (Except AEP, UK and Australian models only) Microphone (1) Parts for installation and connections (1 set) Design and specifications are subject to change without notice.
SiriusXM Connect Vehicle Tuner and Subscription sold separately. www.siriusxm.com Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. iPhone, iPod, iPod classic, iPod nano, iPod touch, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Pandora®, the Pandora® logo, and the Pandora® trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission. Google, Google Play and Android are trademarks of Google Inc.
USB Player section
Interface: USB (High-speed) Maximum current: 1 A The maximum number of recognizable tracks: 10,000 Corresponding codec: MP3 (.mp3), WMA (.wma), WAV (.wav), AAC (.m4a), AAC (.mp4) and FLAC (.flac)
Wireless Communication
Communication System: BLUETOOTH Standard version 3.0 Output: BLUETOOTH Standard Power Class 2 (Max. +4 dBm) Maximum communication range: Line of sight approx. 10 m (33 ft)* 1 Frequency band: 2.4 GHz band (2.4000 2.4835 GHz) Modulation method: FHSS Compatible BLUETOOTH Profiles*2: A2DP (Advanced Audio Distribution Profile) 1.3 AVRCP (Audio Video Remote Control Profile) 1.5 HFP (Handsfree Profile) 1.6 PBAP (Phone Book Access Profile) SPP (Serial Port Profile) MAP (Message Access Profile) HID (Human Interface Device Profile) Corresponding codec: SBC (.sbc) and AAC (.m4a)
*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna (aerial)'s performance, operating system, software application, etc. *2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices.
NOTES ON CHIP COMPONENT REPLACEMENT · Never reuse a disconnected chip component. · Notice that the minus side of a tantalum capacitor may be damaged by heat. FLEXIBLE CIRCUIT BOARD REPAIRING · Keep the temperature of soldering iron around 270 °C during repairing. · Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). · Be careful not to apply force on the conductor when soldering or unsoldering.
US and Canadian models:
CAUTION
The use of optical instruments with this product will increase eye hazard.
SAFETY-RELATED COMPONENT WARNING! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
2
MEX-N5100BE/N5100BT/N5150BT SECTION 1 SERVICING NOTES
TABLE OF CONTENTS 1. 2. 3.
3-1. 3-2. 3-3. 3-4. 3-5. 3-6. 3-7.
The SERVICING NOTES contains important information for servicing. Be sure to read this section before repairing the unit.
SERVICING NOTES .............................................
3
GENERAL .................................................................. 15 DISASSEMBLY
Disassembly Flow ........................................................... Mini Fuse (Blade Type) (10A/32V) (FU1), Cover ......... Sub Panel Assy................................................................ CD Mechanism Deck (MG-101CF-188) ........................ MAIN Board ................................................................... Antenna BT (BT1) .......................................................... Service Position .............................................................. 23 23 24 24 25 25 26
NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES ON LASER DIODE EMISSION CHECK Never look into the laser diode emission from right above when checking it for adjustment. It is feared that you will lose your sight. If the optical pick-up block is defective, please replace the whole optical pick-up block. Never turn the semi-fixed resistor located at the side of optical pick-up block.
optical pick-up
4. 5.
TEST MODE ............................................................ 27 DIAGRAMS
28 29 30 32 33 34 35 36 37
5-1. Block Diagram - SERVO/BT/USB Section - ................. 5-2. Block Diagram - MAIN Section -................................... 5-3. Block Diagram - PANEL/POWER SUPPLY Section - ............................ 5-4. Printed Wiring Boards - MAIN Section (1/2) - .............. 5-5. Printed Wiring Boards - MAIN Section (2/2) - .............. 5-6. Schematic Diagram - MAIN Section (1/4) - ................... 5-7. Schematic Diagram - MAIN Section (2/4) - ................... 5-8. Schematic Diagram - MAIN Section (3/4) - ................... 5-9. Schematic Diagram - MAIN Section (4/4) - ...................
6.
EXPLODED VIEWS
6-1. Sub Panel Section ........................................................... 44 6-2. Chassis Section ............................................................... 45
7.
ELECTRICAL PARTS LIST .............................. 46
Accessories are given in the last of the electrical parts list.
semi-fixed resistor
UNLEADED SOLDER Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size) : LEAD FREE MARK Unleaded solder has the following characteristics. · Unleaded solder melts at a temperature about 40 °C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350 °C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! · Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. · Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.
3
MEX-N5100BE/N5100BT/N5150BT
REPLACING THE LITHIUM BATTERY OF THE REMOTE COMMANDER (Except AEP, UK and Australian models only)
Under normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the remote commander becomes shorter.
1-2. Display in Destination Setting Mode (Displayed characters/values in the following figure are example)
Destination code
CAUTION
Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type.
+ side up
OP5 OP4 OP3 OP2 OP1 OP0 12 digits
1-3. Entering the Destination Code · Method of operation by main unit
Notes on the lithium battery Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. Wipe the battery with a dry cloth to ensure a good contact. Be sure to observe the correct polarity when installing the battery. Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.
DESTINATION ABBREVIATIONS The following abbreviations for model destinations are used in this service manual.
· Abbreviations AUS : Australian model CND : Canadian model EA : Saudi Arabia model IND : Indian model MX : Mexican model RU : Russian model
1. Rotate the control dial, and select the alphanumeric character of "0 to F". 2. The digit advances by pressing the [PUSH ENTER/VOICE] or [> M SEEK+] button. The digit returns by pressing the [ MODE] or [SEEK m .] button. 3. The setting is completed by pressing the [PUSH ENTER/ VOICE] button, and the initialization operation is done. · Method of operation by remote commander (Except AEP, UK and Australian models only)
Note: The model to which the remote commander is not attached can also be operated by using the remote commander.
DESTINATION SETTING METHOD When the complete MAIN board or IC502 on the MAIN board is replaced, the destination setting is necessary. 1. Destination Setting Set destination according to the procedure below. 1-1. Setting the Destination Code 1. In the state of source off (the clock is displayed), enter the test mode by pressing the buttons in order of the [ 4] t [MIC 5] t [PAUSE 6] (press only the [PAUSE 6] button for two seconds). 2. In the state in which the software main version is displayed on the liquid crystal display (refer to following figure), enter the destination setting mode by pressing the buttons in order of the [> M SEEK+] t [SEEK m .] t [PUSH ENTER/ VOICE]. (Displayed characters/values in the following figure are example)
Software main version
1. Press the [V] or [v] button, and select the alphanumeric character of "0 to F". 2. The digit advances by pressing the [b] button. The digit returns by pressing the [B] button. 3. The setting is completed by pressing the [ENTER] button, and the initialization operation is done.
Continued on next page
3. Input the alphanumeric character of 12 digits of "F XXXXXX" displayed on the liquid crystal display, and execute the destination setting.
Note: Refer to following "1-3. Entering the Destination Code" for operation method.
4. The resetting operation is executed by pressing the [ OFF SRC] button for 1 second after the setting ends, and the unit returns to the normal condition.
4
MEX-N5100BE/N5100BT/N5150BT
1-4. Destination Code
Model MEX-N5100BE MEX-N5100BT Destination OP5 OP4 OP3 OP2 OP1 OP0 Russian 0 3 8 0 5 7 US, Canadian 4 2 8 2 4 2 AEP, UK 0 2 8 0 4 1 E, Mexican 0 6 B 0 6 0 Saudi Arabia 0 6 A 0 6 4 Indian 0 6 9 0 6 0 Australian 4 6 8 0 6 0
MODEL IDENTIFICATION Bottom view (MEX-N5100BE/N5100BT)
Part No. Model Number Label
MEX-N5150BT
2. Confirmation After Destination Setting Execute the following operation after completing the destination setting, and confirm a correct destination was set. Destination setting checking method: 1. In the state of source off (the clock is displayed on the liquid crystal display), enter the test mode by pressing the buttons in order of the [ 4] t [MIC 5] t [PAUSE 6] (press only the [PAUSE 6] button for two seconds). 2. In the state in which the software main version is displayed on the liquid crystal display (refer to following figure), enter the destination setting value display mode by pressing the [ SCRL DSPL] button twice. (Displayed characters/values in the following figure are example)
Software main version
Bottom view (MEX-N5150BT: E, Mexican, Indian and Australian models)
Part No. Model Number Label
3. Confirm the alphanumeric character of 12 digits in liquid crystal display is a value correctly input. (Displayed characters/values in the following figure are example)
Destination code
Bottom view (MEX-N5150BT: Saudi Arabia model)
Part No. Model Number Label
OP5 OP4 OP3 OP2 OP1 OP0 12 digits
4. The resetting operation is executed by pressing the [ OFF SRC] button for 1 second after the confirming ends, and the unit returns to the normal condition.
Part No. 4-548-075-0[] 4-548-076-0[] 4-548-077-0[] 4-548-078-0[] 4-548-079-0[] 4-548-080-0[] 4-548-081-0[] 4-548-082-0[]
Model MEX-N5100BT: US and Canadian models (UC) MEX-N5100BT: AEP and UK models (EUR) MEX-N5100BE: Russian model (RU2) MEX-N5150BT: E model (E) MEX-N5150BT: Australian model (ET4) MEX-N5150BT: Mexican model (MX3) MEX-N5150BT: Indian model (IN) MEX-N5150BT: Saudi Arabia model (EA)
5
MEX-N5100BE/N5100BT/N5150BT
TEST DISCS Use following TEST DISC (for CD) when this unit confirms the operation and checks it.
Part No. Description
3-702-101-01 4-225-203-01
DISC (YEDS-18), TEST DISC (PATD-012), TEST
NOTE OF PERFORMING THE OPERATION CHECK When performing the operation check in the state that is removed the CD mechanism deck from the main unit, it is necessary to use a long flexible flat cable. When performing the operation check, use following flexible flat cable.
Part No. Description
IMPORTANT NOTE OF "INITIALIZING" The purpose of "Bluetooth Initialize" is to initialize the Bluetooth connection history (HF/Audio Streaming). (To delete the device information for the devices that you connected to when searching, etc.) When complete MAIN board is replaced, it is necessary to initialize this unit. Refer to the following, initialize this unit.
Note: Phonebook data and dialed/received call history can be deleted by executing "Bluetooth Initialize".
1-846-819-31
CABLE FLEXIBLE FLAT (27 CORE) (Length: 150 mm)
NOTE OF REPLACING THE KEY BOARD When the KEY board is defective, replace the FRONT PANEL (SV) ASSY (Ref. No. FP1). NOTE OF REPLACING THE IC001, IC002, IC804, IC805, IC1002 AND IC1009 ON THE MAIN BOARD IC001, IC002, IC804, IC805, IC1002 and IC1009 on the MAIN board cannot replace with single. When these parts are damaged, replace the complete mounted board. OPERATION CHECK OF THE NFC AFTER COMPLETING THE REPAIRS After completing the repairs of this unit, follow the procedure below to check normal operation of the NFC.
Note: After checking of NFC operation, be sure to delete the pairing information before returning this unit to the customer.
Procedure: 1. In the state of source off (the clock is displayed), press the [MENU] button. 2. Rotate the control dial, and select the "SET BT". 3. Press the [PUSH ENTER/VOICE] button. 4. Rotate the control dial, and select the "SET BT INIT". 5. Press the [PUSH ENTER/VOICE] button, and the message "SET INIT-NO" is displayed on the liquid crystal display. 6. Rotate the control dial clockwise, and the message "SET INITYES" is displayed on the liquid crystal display. 7. Press the [PUSH ENTER/VOICE] button, and the message "INITIAL" is blinked on the liquid crystal display. 8. When "Bluetooth Initialize" is completed, the message "COMPLETE" is displayed on the liquid crystal display for a moment. 9. Press the [ MODE] button, and return to the state of source off (the clock is displayed) mode. CLEANING THE CONNECTORS
The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel and clean theclean the connectors with (page 7) and connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged.
Connecting with a Smartphone by One touch (NFC)
By touching the control dial on the unit with an NFC* compatible smartphone, the unit is paired and connected with the smartphone automatically.
* NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices.
Notes For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch. Never touch the connectors directly with your fingers or with any metal device.
For a smartphone with Android OS 4.0 or lower installed, downloading the app "NFC Easy Connect" available at Google PlayTM is required. The app may not be downloadable in some countries/regions.
CANCELING THE DEMO MODE
You can cancel the demonstration display which appears when the source is off and the clock is displayed.
1
Activate the NFC function on the smartphone.
For details, refer to the operating instructions supplied with the smartphone.
1 2 3 4
Press MENU, rotate the control dial to select [SET DISPLAY], then press it. Rotate the control dial to select [SET DEMO], then press it. Rotate the control dial to select [SET DEMO-OFF], then press it.
The setting is complete.
2
Touch the N-Mark part of the unit with the N-Mark part of the smartphone.
Press
(back) twice.
The display returns to normal reception/play mode.
Make sure that unit.
lights up on the display of the
To disconnect by One touch
Touch the N-Mark part of the unit with the N-Mark part of the smartphone again.
Notes When making the connection, handle the smartphone carefully to prevent scratches. One touch connection is not possible when the unit is already connected to another NFC compatible device. In this case, disconnect the other device, and make connection with the smartphone again.
6
MEX-N5100BE/N5100BT/N5150BT
BLUETOOTH FUNCTION CHECKING METHOD USING A CELLULAR PHONE 1. Required Equipment · This unit to be tested, external microphone of attachment · Cellular phone (Recommended SEMC W880 or W910i, or select from connectable cellular phones list) · Bluetooth audio devices (SONY NWZ-A826, or select from connectable cellular phones/audio devices list) · Speaker connection (at least Front L/R ch) · DC power supply (12 V) 2. Preparation · Confirm the setting of this unit and note down it. · Press the [ CALL] button and rotate the control dial until "SET PAIRING" appears, then press it, confirm that the Bluetooth signal icon ( ) is flashing. · Turn on the Bluetooth function of the cellular phone. 3. Test Environment · No other Bluetooth device is making a communication in the periphery (within 20 m). · No other this unit are supplied with electric power. · There are no two or more wireless LAN access points in the periphery (with 50 m) (one is OK). · The set should be tested in a place such as a meeting room, free from ambient noise. · The speaker at the far end should be in a place such as another meeting room separated acoustically. 4. Setting Install this unit on the desktop.
Approx. 50 cm
6. Bluetooth Phone (Hands Free) Function Check
Note: Depending on the connecting device, Signal-strength/Battery-remaining indications might not be displayed. Or, depending on the connecting device, the levels of indications are shown incorrectly. Even if you see no indications or wrong indications, they are not failures of this unit.
1. Search for this unit from the Bluetooth device (cellular phone), and confirm whether this unit (model name) is displayed. 2. Search for the distance of this unit and the Bluetooth device (cellular phone) about 5 m apart. Confirm whether the Bluetooth device (or this unit) is displayed after it searches. 3. Do the pairing of the cellular phone and this unit (input of passkey). 4. Connect the cellular phone with this unit, and confirm the "HF" icon ( ) lights. 5. Confirm the connection continues even if the distance of the cellular phone and this unit is separated by about 5 m. 6. Set this unit besides the "BT PHONE" source, and call the cellular phone connected with this unit. Confirm the automatic change of this unit into "BT PHONE" source, and the change into the screen for incoming calls. Confirm the ring tone is heard from the front speaker. 7. Take a phone call (press the [ CALL] button), and start a conversation. Confirm the other person voice is heard from the speaker. Speak toward an external microphone at the following condition, and confirm the other party hears its voice (An external microphone is connected). Compare the sound quality with a normal set. Confirm that there is no big difference. 8. Turn on ACC from off, and confirm whether this unit connects Bluetooth with the cellular phone again.
Note: Depending on the cellular phone, it might not reconnect automatically when ACC is turned on.
Speaker
Unit
7. Bluetooth Audio Function Check
Note: Depending on the connecting BT Audio device, track information (e.g. track name, playback time) can be on display. If the device doesn't support AVRCP1.3, or, if AVRCP1.3 feature of the device has not been validated with this unit; the track information won't be shown. Even if there is no track information on display during playback of an AVRCP1.3 device, it is not a failure of this unit.
Approx. 80 cm
Tester
5. Precautions Beware of the following points when conducting the talking test: · There is no fault if a talking can be made by adjusting appropriately the volume of the telephone of the other party and the cellular phone connected through the Bluetooth, besides the setup of this unit. · The speaker's voice will become loud naturally if the periphery is noisy, or become low if quiet (even though the speaker intents to talk on the same volume level). · The speaker's voice will become loud naturally if the other party's voice is loud.
1. Connect the Bluetooth audio device (or cellular phone with Bluetooth audio function) with this unit, and confirm the "Audio Streaming" icon ( ) lights. 2. Playback Bluetooth audio. Confirm the sound is emitted from this unit when this unit is switched to "BT AUDIO" source. 3. Confirm whether Bluetooth audio can be controlled by operating this unit (the [> M SEEK+], [SEEK m .] and [PAUSE 6] buttons operation).
Note: Varies depending on the connected Bluetooth audio device.
8. What to Do after Checking · After checking, select "SET BT INIT" from the menu list of this unit to execute initialization. (Connected device information is deleted)
7
MEX-N5100BE/N5100BT/N5150BT
BLUETOOTH INFORMATION WRITING METHOD When the complete MAIN board, knob (VOL) (SV) assy or front panel (SV) assy is replaced, the writing of Bluetooth information is necessary. Write the Bluetooth information according to the procedure below. Preparation: · Windows PC · NFC compatible smartphone that installed the file manager application (ASTRO File Manager, File Expert, etc.) · USB cable for the smartphone · NFCtagWriter.apk (ver.1.0.2 and above)
Note 1: The NFCtagWriter.apk is updated. When the NFCtagWriter.apk is prepared already, be sure to refer to the "6. Version Check Method of the NFC Tag Data Writing Application for the Servicing" on the page 12, and check the version of NFCtagWriter.apk. Note 2: Confirm the method of obtaining the NFCtagWriter.apk to the service headquarters.
9. Refer to the "6. Version Check Method of the NFC Tag Data Writing Application for the Servicing" on the page 12, and check the version of NFCtagWriter.apk. ver.0.9.0 : The use is not allowed. Install the NFCtagWriter.apk of ver.1.0.2 and above. ver.1.0.2 and above : This use is allowed. 2. Writing the NFC Tag Data Write the NFC tag data (Bluetooth information) to the NFC module in the knob (VOL) (SV) assy. Procedure: 1. Check the Bluetooth address (BD_ADDR). There are following two checking methods. · How to read from the BT module label · How to display on the liquid crystal display by the test mode How to read from the BT module label: Set the unit to the state where the BT module (Ref. No. IC1002 on the MAIN board) can be seen. (Refer to the "2. DISASSEMBLY" on the page 23 and after) MAIN board top view
1. Installing the NFC Writing Application for the Servicing Install the NFCtagWriter.apk on the smartphone for writing of Bluetooth information. Procedure: 1. Prepare the NFCtagWriter.apk file on the PC. 2. Connect the smartphone to the PC with the USB cable. 3. Transfer the NFCtagWriter.apk to the smartphone. 4. When tapping the "Settings" "Security" on the screen of the smartphone, check the box "Unknown sources".
BD_ADDR (Barcode)
5. Disconnect the smartphone from the PC. 6. Use the file manager application to explore the NFCtagWriter. apk on the smartphone. 7. Click on the NFCtagWriter.apk to open it, and install the NFCtagWriter.apk to the smartphone. 8. When tapping the "Settings" "Security" on the screen of the smartphone, uncheck the box "Unknown sources".
Screen after the installation for reference
48D2242F241A
BD_ADDR BT module label Continued on next page
Movies
Settings
WALKMAN
Album
YouTube
Media Player
Play Store
Camera
Chrome
NFCtagWriter
Maps
Browser
NFCtagWriter application
8
MEX-N5100BE/N5100BT/N5150BT
How to display on the liquid crystal display by the test mode: 1. In the state of source off (the clock is displayed on the liquid crystal display), enter the test mode by pressing the buttons in order of the [ 4] t [MIC 5] t [PAUSE 6] (press only the [PAUSE 6] button for two seconds).
Software main version
6. Input the Bluetooth address (BD_ADDR). (Input the Bluetooth address (BD_ADDR) that written on the BT module label with the keyboard on the smartphone, or tap the "QR" on the screen of the smartphone and read the barcode with the camera of the smartphone)
2. In the state in which the software main version is displayed on the liquid crystal display, enter the Bluetooth address (BD_ADDR) display mode by pressing the [ SCRL DSPL] button. (Displayed characters/values in the following figure are example)
Bluetooth address (BD_ADDR)
Bluetooth Device Addres
7. Tap the "Write" on the screen of the smartphone, in the state that unchecked the box "Read-only". 3. The resetting operation is executed by pressing the [ OFF SRC] button for 1 second after the confirming ends, and the unit returns to the normal condition. 2. Turn on the NFC function of the smartphone. 3. Start the NFCtagWriter application on the smartphone. 4. Tap the "Write" on the screen of the smartphone.
48D2242F241A
8. Touch the N-mark part of the smartphone to the N-mark part of the unit.
5. Input the Bluetooth Local Name (BL_NAME). (Input the model name with the keyboard on the smartphone, or tap the "List" on the screen of the smartphone and select the model name)
9. Check that "Completed!" is displayed on the screen of the smartphone.
Note 1: When "Completed!" is not displayed on the screen of the smartphone, refer to "3. Error Display" on the page 10.
Bluetooth Local Name
Bluetooth Device Addres
Continued on next page
9
MEX-N5100BE/N5100BT/N5150BT
10. End the NFCtagWriter application on the smartphone. 11. Check the operation of connecting with the smartphone by one touch (NFC). (Refer to the "OPERATION CHECK OF THE NFC AFTER COMPLETING THE REPAIRS" on the page 6) 12. Start the NFCtagWriter application on the smartphone. 13. Tap the "Write" on the screen of the smartphone.
17 Tap the "Read" on the screen of the smartphone.
18. Check that "BD_ADDR" on the screen of the smartphone accords with BD_ADDR written on the BT module label and "MODE" on the screen of the smartphone is "00 00 (Readonly)". 14. Check the box "Read-only" on the screen of the smartphone, and tap the "Write" on the screen of the smartphone.
48D2242F241A
19. End the NFCtagWriter application on the smartphone. 20. Check the operation of connecting with the smartphone by one touch (NFC). (Refer to the "OPERATION CHECK OF THE NFC AFTER COMPLETING THE REPAIRS" on the page 6) 3. Error Display When the writing of the NFC tag data has failed, "Error" is displayed on the screen of the smartphone. When "Error" is displayed on the screen of the smartphone, operate according to the procedure below.
15. Touch the N-mark part of the smartphone to the N-mark part of the unit.
16. Check that "Completed!" is displayed on the screen of the smartphone.
Note 2: When "Completed!" is not displayed on the screen of the smartphone, refer to "3. Error Display".
Procedure: 1. Tap the "Write" on the screen of the smartphone to write of the NFC tag data again. 2. When "Error" is displayed on the screen of the smartphone again, tap the "Read" on the screen of the smartphone. 3. Check that "MODE" on the screen of the smartphone is not "00 00 (Read-only)". 4. When "MODE" on the screen of the smartphone is "00 00 (Read-only)", execute the writing of the NFC tag data again after replacing the knob (VOL) (SV) assy. (When "MODE" on the screen of the smartphone is "00 00 (Read-only)", the writing of the NFC tag data cannot execute)
10
MEX-N5100BE/N5100BT/N5150BT
4. Check Method of the NFC Tag Data Check the NFC tag data according to the procedure below. Procedure: 1. Check the Bluetooth address (BD_ADDR). There are following two checking methods. · How to read from the BT module label · How to display on the liquid crystal display by the test mode How to read from the BT module label: Set the unit to the state where the BT module (Ref. No. IC1002 on the MAIN board) can be seen. (Refer to the "2. DISASSEMBLY" on the page 23 and after) MAIN board top view
How to display on the liquid crystal display by the test mode: 1. In the state of source off (the clock is displayed on the liquid crystal display), enter the test mode by pressing the buttons in order of the [ 4] t [MIC 5] t [PAUSE 6] (press only the [PAUSE 6] button for two seconds).
Software main version
2. In the state in which the software main version is displayed on the liquid crystal display, enter the Bluetooth address (BD_ADDR) display mode by pressing the [ SCRL DSPL] button. (Displayed characters/values in the following figure are example)
Bluetooth address (BD_ADDR)
3. The resetting operation is executed by pressing the [ OFF SRC] button for 1 second after the confirming ends, and the unit returns to the normal condition. 2. Turn on the NFC function of the smartphone. 3. Start the NFCtagWriter application on the smartphone. 4. Tap the "Read" on the screen of the smartphone.
BD_ADDR (Barcode)
48D2242F241A
BD_ADDR BT module label
5. Check that "BD_ADDR" on the screen of the smartphone accords with BD_ADDR written on the BT module label and "MODE" on the screen of the smartphone is "00 00 (Readonly)".
6. End the NFCtagWriter application on the smartphone.
11
MEX-N5100BE/N5100BT/N5150BT
5. The Factor that One Touch Connection is Impossible The four following factors are considered as the factor that one touch connection is impossible. Guess and check the defective factor by each checking result.
Note: The four following factors are examples. Factor 1 BT module defect Knob (VOL) (SV) 2 assy defect NFC tag data 3 writing failure 4 Smartphone Bluetooth manual connection check by user NG OK OK OK NFC tag data check NG NG OK Bluetooth manual connec- NFC one touch connection tion check by servicing check with smartphone NG NG OK OK OK NG NG NG
6. Version Check Method of the NFC Tag Data Writing Application for the Servicing Check the version of the NFC tag data writing application (NFCtagWriter application) for the servicing according to the procedure below. Procedure: 1. Start the NFCtagWriter application on the smartphone. 2. Tap the " " (menu button) or " " of the screen of the smartphone, then tap the "About" that is displayed on the screen of the smartphone.
AFFIXING OF LABEL (SERIAL NUMBER) When the front panel (SV) assy is replaced, it is necessary to affix the label (serial number). 2 labels (serial number) are included with a new front panel (SV) assy. Affix 1 label to the rear side of the front panel (SV) assy. Affix the other one to the bottom side of main unit. Be sure to perform this procedure, as Bluetooth will not operate correctly if the serial number of the front panel (SV) assy and main unit do not match. Also, since the serial number has changed, print page 13 and hand the tear-off with the product to the customer when returning the product after repairs are complete.
or
label (serial number) Front panel (SV) assy rear view label (serial number)
3. Check that version of the NFC tag data writing application for the servicing is displayed on the screen of the smartphone.
Main unit bottom view (MEX-N5100BE/N5100BT/ N5150BT: Saudi Arabia model)
label (serial number)
ver.0.9.0 The use is not allowed (Use the ver.1.0.2 and above)
ver.1.0.2 The use is allowed
Main unit bottom view (MEX-N5150BT: E, Mexican, Indian and Australian models)
12
MEX-N5100BE/N5100BT/N5150BT
· Please cut out along the dotted line and use it. Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction. Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
Notice about the serial number change on the back side of the front panel: The serial number on the back of the front panel has changed due to repairs. For details, refer to the "Detaching the Front Panel" section of "Getting Started" in the operating instruction.
13
MEX-N5100BE/N5100BT/N5150BT
MEMO
14
MEX-N5100BE/N5100BT/N5150BT SECTION 2 GENERAL
(US and Canadian models)
This section is extracted from instruction manual.
Connection/Installation
Connection (For MEX-N5100BT)
Subwoofer*1 *3 *3 *3 Power amplifier*1
Cautions
Run all ground (earth) leads to a common ground (earth) point. Do not get the leads trapped under a screw, or caught in moving parts (e.g., seat railing). Before making connections, turn the car ignition off to avoid short circuits. Connect the yellow and red power supply leads only after all other leads have been connected. Be sure to insulate any loose unconnected leads with electrical tape for safety.
from a wired remote control (not supplied)*4 Satellite radio tuner (SiriusXM)*1 White White/black striped Gray Gray/black striped Green Green/black striped Purple Purple/black striped Black Yellow Red Blue/white striped (MAX 0.4A) Orange/white striped For details, see "Making connections" (page 35). Rear speaker*1*2 Front speaker*1*2
Precautions
Choose the installation location carefully so that the unit will not interfere with normal driving operations. Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperature, such as in direct sunlight or near heater ducts. Use only the supplied mounting hardware for a safe and secure installation.
Note on the power supply lead (yellow) When connecting this unit in combination with other stereo components, the amperage rating of the car circuit to which the unit is connected must be higher than the sum of each component's fuse amperage rating.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
*5*6 from a car antenna (aerial)
*1 *2 *3 *4
Not supplied Speaker impedance: 4 8 × 4 RCA pin cord (not supplied) Depending on the type of car, use an adaptor for a wired remote control (not supplied).
*5 Whether in use or not, route the microphone input cord such that it does not interfere with driving operations. Secure the cord with a clamp, etc., if it is installed around your feet. *6 For details on installing the microphone, see "Installing the microphone " (MEX-N5100BT only)"
Making connections
To a common ground (earth) point First connect the black ground (earth) lead, then connect the yellow and red power supply leads. To the +12 V power terminal which is energized at all times Be sure to first connect the black ground (earth) lead to a common ground (earth) point. To the +12 V power terminal which is energized when the ignition switch is set to the accessory position If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times. Be sure to first connect the black ground (earth) lead to a common ground (earth) point. To the power antenna (aerial) control lead or the power supply lead of the antenna (aerial) booster It is not necessary to connect this lead if there is no power antenna (aerial) or antenna (aerial) booster, or with a manually-operated telescopic antenna (aerial). To AMP REMOTE IN of an optional power amplifier This connection is only for amplifiers and a power antenna (aerial). Connecting any other system may damage the unit. To a car's illumination signal Be sure to first connect the black ground (earth) lead to a common ground (earth) point.
Subwoofer Easy Connection
You can use a subwoofer without a power amplifier when it is connected to a rear speaker cord.
Front speaker
Installing the microphone
To capture your voice during handsfree calling, you need to install the microphone .
Subwoofer
Note Use a subwoofer with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid damage.
Clip (not supplied)
Memory hold connection
When the yellow power supply lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off.
Speaker connection
Before connecting the speakers, turn the unit off. Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid damage.
Cautions
It is extremely dangerous if the cord becomes wound around the steering column or gearstick. Be sure to keep it and other parts from interfering with your driving operations. If airbags or any other shock-absorbing equipment is in your car, contact the store where you purchased this unit, or the car dealer, before installation.
Note Before attaching the double-sided tape , clean the surface of the dashboard with a dry cloth.
15
MEX-N5100BE/N5100BT/N5150BT
Using the wired remote control
When using the steering wheel remote control
Installation of the connection cable RC-SR1 (not supplied) is required before use.
Installation
Removing the protection collar and the bracket
Before installing the unit, remove the protection collar and the bracket from the unit.
Mounting the unit in the dashboard
Before installing, make sure the catches on both sides of the bracket are bent inwards 2 mm (3/32 in). When mounting in a Japanese car, see "Mounting the unit in a Japanese car". (page 37).
1
To enable the steering wheel remote control, select [SET STEERING] [STR EDIT] to make the registration. (page 19). When the registration completes, the steering wheel remote control becomes available.
1
1
Notes on installing the connection cable RC-SR1 (not supplied) Refer to the support sites on the back cover for details, then connect each lead properly to the appropriate leads. Making an improper connection may damage the unit. Depending on the type of car, be sure to insulate the unused leads with electrical tape for safety. Do not connect this cable when the steering wheel remote control is not used. Consulting the dealer or an experienced technician for help is recommended.
Pinch both edges of the protection collar , then pull it out.
Position the bracket inside the dashboard, then bend the claws outward for a tight fit.
182 mm (7 1/4 in) 53 mm (2 1/8 in)
Catch
When using the wired remote control
2
1
To enable the wired remote control, set [STR CONTROL] in [SET STEERING] to [EXTERNAL].
Insert both release keys until they click, and pull down the bracket , then pull up the unit to separate.
2
Mount the unit onto the bracket attach the protection collar .
, then
Face the hook inwards.
Notes If the catches are straight or bent outwards, the unit will not be installed securely and may spring out. Make sure the 4 catches on the protection collar are properly engaged in the slots of the unit.
Mounting the unit in a Japanese car
You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer.
Fuse replacement
When replacing the fuse, be sure Fuse (10 A) to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.
TOYOTA
to dashboard/center console
Bracket Bracket
Existing parts supplied with your car
NISSAN
to dashboard/center console
Bracket Bracket
Existing parts supplied with your car
Note To prevent malfunction, install only with the supplied screws .
16
MEX-N5100BE/N5100BT/N5150BT
(AEP and UK models)
Connection/Installation
Connection (For MEX-N5100BT)
Subwoofer*1 *3 *3 *3 Power amplifier*1
Cautions
Run all ground (earth) leads to a common ground (earth) point. Do not get the leads trapped under a screw, or caught in moving parts (e.g., seat railing). Before making connections, turn the car ignition off to avoid short circuits. Connect the power supply lead to the unit and speakers before connecting it to the auxiliary power connector. Be sure to insulate any loose unconnected leads with electrical tape for safety.
from a wired remote control (not supplied)*4
Precautions
Choose the installation location carefully so that the unit will not interfere with normal driving operations. Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperature, such as in direct sunlight or near heater ducts. Use only the supplied mounting hardware for a safe and secure installation.
Note on the power supply lead (yellow) When connecting this unit in combination with other stereo components, the amperage rating of the car circuit to which the unit is connected must be higher than the sum of each component's fuse amperage rating.
*2 For details, see "Making connections" (page 31).
See "Power connection diagram" (page 31) for details.
*5*6 from a car antenna (aerial)*7
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
*1 *2 *3 *4
Not supplied Speaker impedance: 4 8 × 4 RCA pin cord (not supplied) Depending on the type of car, use an adaptor for a wired remote control (not supplied). *5 Whether in use or not, route the microphone input cord such that it does not interfere with driving operations. Secure the cord with a clamp, etc., if it is installed around your feet.
*6 For details on installing the microphone, see "Installing the microphone " (MEX-N5100BT only)" *7 Depending on the type of car, use an adaptor (not (page 32). *7 supplied) if on the type of car, use an adaptor (not Depending the antenna connector does not fit. supplied) if the antenna connector does not fit.
Making connections
If you have a power antenna (aerial) without a relay box, connecting this unit with the supplied power supply lead may damage the antenna (aerial). To the car's speaker connector
Subwoofer Easy Connection
You can use a subwoofer without a power amplifier when it is connected to a rear speaker cord.
Front speaker
Common connection
Red Red
Yellow Subwoofer
Yellow
12 15
continuous power supply switched power supply
Yellow Red
1 2 3 4
5 6 7 8
Notes Preparation of the rear speaker cords is required. Rear speaker (right) Front speaker (right) Front speaker (left) Rear speaker (left) Purple Purple/black striped Gray Gray/black striped White White/black striped Green Green/black striped Use a subwoofer with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid damage.
When the positions of the red and yellow leads are inverted
Red Red
Memory hold connection
When the yellow power supply lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off.
Yellow Yellow
Speaker connection
Before connecting the speakers, turn the unit off. Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid damage.
12 15
switched power supply continuous power supply
Yellow Red
To the car's power connector
When the car without ACC position
Red Red
Power connection diagram
Make sure your car's auxiliary power connector, and match the connections of cords correctly depending on the car.
Auxiliary power connector
12 13 14* 14 15 16
continuous power supply
Yellow
Yellow
Yellow
power antenna (aerial) / power amplifier control Blue/white striped (REM OUT) switched illumination power supply switched power supply ground (earth) Orange/white striped Red Black
After matching the connections and switching power supply leads correctly, connect the unit to the car's power supply. If you have any questions and problems connecting your unit that are not covered in this manual, consult the car dealer.
17
MEX-N5100BE/N5100BT/N5150BT
Installing the microphone
To capture your voice during handsfree calling, you need to install the microphone .
Installation
Removing the protection collar and the bracket
Before installing the unit, remove the protection collar and the bracket from the unit.
Mounting the unit in the dashboard
Before installing, make sure the catches on both sides of the bracket are bent inwards 2 mm (3/32 in).
1
Position the bracket inside the dashboard, then bend the claws outward for a tight fit.
182 mm (7 1/4 in) 53 mm (2 1/8 in)
1
Clip (not supplied)
Pinch both edges of the protection collar , then pull it out.
Catch
2
Cautions
It is extremely dangerous if the cord becomes wound around the steering column or gearstick. Be sure to keep it and other parts from interfering with your driving operations. If airbags or any other shock-absorbing equipment is in your car, contact the store where you purchased this unit, or the car dealer, before installation.
Note Before attaching the double-sided tape , clean the surface of the dashboard with a dry cloth.
Insert both release keys until they click, and pull down the bracket , then pull up the unit to separate.
2
Mount the unit onto the bracket attach the protection collar .
, then
Face the hook inwards.
Using the wired remote control
1
To enable the wired remote control, set [STR CONTROL] in [SET STEERING] to [EXTERNAL] .(page 17).
Notes If the catches are straight or bent outwards, the unit will not be installed securely and may spring out. Make sure the 4 catches on the protection collar are properly engaged in the slots of the unit.
Fuse replacement
When replacing the fuse, be sure Fuse (10 A) to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.
18
MEX-N5100BE/N5100BT/N5150BT
(Russian model)
/
( MEX-N5100BE)
*1 *3 *3 *3 *1 ( )* 4
!
. (, ). . , -- . .
*2 . " " (. 36).
. " , " (. 37). . , , , *5*6 , , *7 , . *1 . *6 . . " "( *2 :
() cepeea , . 48 × 4 *3 RCA ( ). *4 , , ( ). *5 , , , . . ., .
*7 MEX-N5100BE)" (. 37). *7 ( ), ), ( . .
, 45°.
, .
, .
12
13
/ / (REM OUT)
1 2 3 4
5 6 7 8
() () () ()
/ / / /
/ 14* 14 15 16
. 48 .
, , .
. 48 .
19
MEX-N5100BE/N5100BT/N5150BT
( ).
.
.
1
( )
, .
12 15
2
!
, -- ! , . , , .
.
, , , .
.
12 15
ACC
1
, [STR CONTROL] [SET STEERING] [EXTERNAL] .
. - , , , .
, 2 .
2
, .
(10 A) , , . , . , . Sony.
1
, , .
182 53
, , 4 , .
20
MEX-N5100BE/N5100BT/N5150BT
(E, Saudi Arabia, Mexican, Indian and Australian models)
Connection/Installation
Connection (For MEX-N5150BT)
Subwoofer*1 *3 *3 *3 Power amplifier*1
Cautions
Run all ground (earth) leads to a common ground (earth) point. Do not get the leads trapped under a screw, or caught in moving parts (e.g., seat railing). Before making connections, turn the car ignition off to avoid short circuits. Connect the yellow and red power supply leads only after all other leads have been connected. Be sure to insulate any loose unconnected leads with electrical tape for safety.
from a wired remote control (not supplied)*4
Precautions
Choose the installation location carefully so that the unit will not interfere with normal driving operations. Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperature, such as in direct sunlight or near heater ducts. Use only the supplied mounting hardware for a safe and secure installation.
Note on the power supply lead (yellow) When connecting this unit in combination with other stereo components, the amperage rating of the car circuit to which the unit is connected must be higher than the sum of each component's fuse amperage rating.
White White/black striped Gray Gray/black striped Green Green/black striped Purple Purple/black striped Black Yellow Red Blue/white striped (MAX 0.4A) Orange/white striped For details, see "Making connections" (page 32). Rear speaker*1*2 Front speaker*1*2
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
*5*6 from a car antenna (aerial)
*1 *2 *3 *4
Not supplied Speaker impedance: 4 8 × 4 RCA pin cord (not supplied) Depending on the type of car, use an adaptor for a wired remote control (not supplied).
*5 Whether in use or not, route the microphone input cord such that it does not interfere with driving operations. Secure the cord with a clamp, etc., if it is installed around your feet. *6 For details on installing the microphone, see "Installing the microphone " (MEX-N5150BT only)"
Making connections
To a common ground (earth) point First connect the black ground (earth) lead, then connect the yellow and red power supply leads. To the +12 V power terminal which is energized at all times Be sure to first connect the black ground (earth) lead to a common ground (earth) point. To the +12 V power terminal which is energized when the ignition switch is set to the accessory position If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times. Be sure to first connect the black ground (earth) lead to a common ground (earth) point. To the power antenna (aerial) control lead or the power supply lead of the antenna (aerial) booster It is not necessary to connect this lead if there is no power antenna (aerial) or antenna (aerial) booster, or with a manually-operated telescopic antenna (aerial). To AMP REMOTE IN of an optional power amplifier This connection is only for amplifiers and a power antenna (aerial). Connecting any other system may damage the unit. To a car's illumination signal Be sure to first connect the black ground (earth) lead to a common ground (earth) point.
Subwoofer Easy Connection
You can use a subwoofer without a power amplifier when it is connected to a rear speaker cord.
Front speaker
Installing the microphone
To capture your voice during handsfree calling, you need to install the microphone .
Subwoofer
Note Use a subwoofer with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid damage.
Clip (not supplied)
Memory hold connection
When the yellow power supply lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off.
Speaker connection
Before connecting the speakers, turn the unit off. Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid damage.
Cautions
It is extremely dangerous if the cord becomes wound around the steering column or gearstick. Be sure to keep it and other parts from interfering with your driving operations. If airbags or any other shock-absorbing equipment is in your car, contact the store where you purchased this unit, or the car dealer, before installation.
Note Before attaching the double-sided tape , clean the surface of the dashboard with a dry cloth.
21
MEX-N5100BE/N5100BT/N5150BT
(E, Saudi Arabia, Indian and Australian models)
Installation
Removing the protection collar and the bracket
Before installing the unit, remove the protection collar and the bracket from the unit.
Mounting the unit in the dashboard
Before installing, make sure the catches on both sides of the bracket are bent inwards 2 mm (3/32 in). When mounting in a Japanese car, see "Mounting the unit in a Japanese car". (page 33).
Using the wired remote control
1
To enable the wired remote control, set [STR CONTROL] in [SET STEERING] to [EXTERNAL] .(page 18).
1
(Mexican model)
Using the wired remote control
When using the steering wheel remote control
Installation of the connection cable RC-SR1 (not supplied) is required before use.
To enable the steering wheel remote control, select [SET STEERING] [STR EDIT] to make the registration. (page 17). When the registration completes, the steering wheel remote control becomes available. Notes on installing the connection cable RC-SR1 (not supplied) Refer to the support sites on the back cover for details, then connect each lead properly to the appropriate leads. Making an improper connection may damage the unit. Depending on the type of car, be sure to insulate the unused leads with electrical tape for safety. Do not connect this cable when the steering wheel remote control is not used. Consulting the dealer or an experienced technician for help is recommended.
1
Position the bracket inside the dashboard, then bend the claws outward for a tight fit.
182 mm (7 1/4 in) 53 mm (2 1/8 in)
Pinch both edges of the protection collar , then pull it out.
1
Catch
2
Inser