Text preview for : ARE001.PDF part of Sharp AR 5132 Technical report
Back to : Technical report.rar | Home
Date : Feb. 23, 1995 DIGITAL COPIER : AR-5040 No. : ARE-001
PARTS CHANGE AND ADDITION
1.Model name: AR-5040
2.General:
There have been changes and additions of parts in the model above from the start of mass production.
3.Description:
1. Addition of CCD protection sheet to CCD cover in the scanner unit
CCD protection sheet (added)
CCD cover (P/G 12 -28)
2. Parts' code change in the fiber fixing cushion of the scanner unit
3. Addition of FIN positioning spacer to the chassis joint plate in the finisher section
1/4
Green C
SHARP CORPORATION
Reprography Division
Rear
Chassis joint plate (P/G 48 )
, ,
Front Standard
FIN positioning spacer (added)
Standard
4. Parts' code change of TC spring of TC-AC case unit
5. Addition of polyslider and discontinuance of screw in the waste toner box unit
A screw discontinued
Polyslider (added)
6. Change of screws and discontinuance of open detection lever in the finisher unit
2/4
,, ,
0~1mm
7. Addition of a shield seal against light to the reflector in the copy lamp unit
Slit Slit shield seal against light (two) Rear side Front side PSEL-0392FCZZ
0~1mm
Slit end standard
Slit end standard
Attachment position (pointed by arrow)
8. Parts code change (for UK only) in the key operator guide manual
9. Parts code change in the CL lead cushion in front of the optical unit
10. Dicontinuance of the FIN paper guide and its attachment screw in the finisher frame unit
11. Parts' code change of the transport clutch in the paper feeding drive frame unit and the drive box upper unit
12. Addition of the discharge brush in the front side of the fusing unit
Discharge brush (added)
3/4
Current parts Ref. No. Model name Version P/G No. Parts code
New parts Parts code Price rank AN Parts name
Effec- Intertive changetime ability
Note
1
12
--
PSHEZ3759FCZZ
CCD protection sheet Fiber fixing cushion FIN positioning spacer TC spring SE Polyslider
2
12 -27
PCUSS0308FCZZ
PCUSF0324FCZZ
AC
3 4 All
48 46 -13 40
-- MSPRP1550FCZZ -- XBPSD40P08KS0 (Q'ty: 2) XBPSD30P25K00 (Q'ty: 2) MLEVF0635FCZ1 --
PSPAZ0657FCZZ MSPRC2326FCZZ LX-WZ0117FCZZ (Q'ty: 2) Q'ty change 21 XBPSD30P25000 (Q'ty: 2) Discontinued PSEL-0392FCZZ (Q'ty: 2) TINSE1266FCZZ PCUSF0323FCZZ (Q'ty: 2) Discontinued Discontinued
AB AE AB
5 40 AA Screw (M4x8)
47 -12 6 AR-5040 51 -91 7 USA only 13
AA -- AC
Screw (M3x25) 1st lot Open dtect lever Slit shield seal against light Key operator guide manual CL lead cushion N FIN paper guide Screw (M3) --
8
74 -17 4 -49 51 -133
TINSE1253FCZZ PCUSS0307FCZZ (Q'ty: 2) PGIDH1514FCZZ LX-BZ1028ACZZ (Q'ty: 3)
BD
9
AE -- --
10 All 51 -134 28 -10 11 36 -21 12 1. Interchangeable. 20 -66
PCLC-0210FCZZ
PCLC-0243FCZZ
AW
Transport clutch
PBRSR0059FCZZ (Q'ty: 1)
PBRSR0059FCZZ (Q'ty: 2)
AK
Discharge brush
4. Not interchangeable. 5. Interchangeable if replaced with same types of related parts in use. 6. Others.
2. Current type can be used in place of new type. New type cannot be used in place of current type. 3. Current type cannot be used in place of new type. New type can be used in place of current type.
Parts marked with " ! " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
4/4