Text preview for : ARE043.PDF part of Sharp AR 5132 Technical report
Back to : Technical report.rar | Home
Date : Jul. 7, 1997
DIGITAL COPIER : AR-5132
No. : ARE-043
1. MEASURE TO ALLEVIA PROBLEMS OF ELECTRICAL TE NOISE. 2. MEASURE TO ALLEVIA PROBLEMS OF JAMS WHICH TE OCCUR BEFORE THE FUSING PROCESS.
1. Measure to alleviate problems of electrical noise.
1.Model Name:
AR-5132 (Only for machines bound for the destinations of the 200 V series).
2.General:
The changes and additions of the parts listed below have been carried out as a measure to alleviate problems of electrical noise in machines bound for destinations of the 200 V series.
3.Description:
<1> Agrounding plate right has been attached to the left side of the rear frame.
M3 screw type speed nut ø2 hole M3 × 6 bind taping, 2 types
Abnormally shaped hole
Rear frame left side
Corner Screw tip standard B'
Square hole
Grounding plate right
M4 screw type speed nut
ø5 hole M4 × 6 bind taping, 2 types Dimple
1/3
Green C
SHARP CORPORATION
Reprography Division
<2> Agrounding plate left has been attached to the fusing drawer attachment plate (P/G [10]-29) with fixing tape.
Fusing drawer attachment plate Grounding plate left fixing tape
<3> Achange has been carried out in the ICU PWB cover, and the grounding plate left has been attached.
Grounding plate left Fusing drawer attachment plate
4.Action:
From the start of mass production.
2/3
2. Measure to alleviate problems of jams which occur before the fusing process.
1.Model Name:
AR-5132 (Only for machines bound for the destinations of the 200 V series).
2.General:
There have been problems with jams occurring during back side copy operations of A3 sized copy paper, caused by the copy paper getting caught on the fusing upper guide due to curling of the right edge of the copy paper.
3.Description:
Achange has been carried out in the angle of the bent section of the metal plate of the fusing guide cover, and a fusing guide sheet has been added. This measure has been carried out to help the copy paper move more smoothly through the machine.
Fusing guide cover
Fusing upper guide
Fusing guide sheet PC-EX
4.Action:
From the start of 1997 March production.
Current parts Ref. No. Model name Version P/G No. Parts code Parts code LPLTM5352FCZZ 1 (1) 9 ---XUBSD30P06000 1 (2) 1 (3) 200V series 10 12 -14 12 16 -17 2 16 1. Interchangeable. 2. Current type can be used in place of new type. New type cannot be used in place of current type. 3. Current type cannot be used in place of new type. New type can be used in place of current type. 4. Not interchangeable. 5. Interchangeable if replaced with same types of related parts in use. 6. Others. ---PSHEP4506FCZZ AE Fusing guide sheet PC-EX PCOVP1307FCZZ ---PCOVP1160FCZZ PTPE-0237FCZZ PCOVP1420FCZZ LPLTM5351FCZZ PCOVP1160FCZ1 AD AN AV AK XUBSD40P06000 AA Screw (M3× 6) Grounding plate left fixing tape ICU PWB cover Grounding plate left HR upper guide cover 3 6 1st lot 6 New parts Price rank AT Parts name Effec- Intertive changeability time
Note
Grounding plate right Screw (M4× 6)
AR-5132
1st lot '97/3
Parts marked with `` '' is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
3/3